PowerBook G4 Aluminum 12" 867 MHz EMI Finger ... AWS

Report 0 Downloads 50 Views
PowerBook G4 Aluminum 12" 867 MHz EMI Finger Replacement

PowerBook G4 Aluminum 12" 867 MHz EMI Finger Replacement Written By: iRobot

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

PowerBook G4 Aluminum 12" 867 MHz EMI Finger Replacement

INTRODUCTION Small metal finger located beneath the memory door.

TOOLS:

PARTS:

Coin (1)

MacBook Pro 15" Screw Set (1)

Phillips #00 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

PowerBook G4 Aluminum 12" 867 MHz EMI Finger Replacement

Step 1 — Battery 

Use a coin to turn the battery locking screw 90 degrees to the right.



Lift the battery out of the computer.



Remove the four Phillips screws from the memory door.



Slide the memory door away from the memory compartment.

Step 2 — EMI Finger

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

PowerBook G4 Aluminum 12" 867 MHz EMI Finger Replacement

Step 3 

Remove the long black Phillips screw next to the memory card.



Remove the small EMI finger beneath the black screw.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-08-13 01:02:34 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4