Q45BW22 Series Sensors - Carlton Bates
Q45BW22 Series Sensors 90 to 250V ac photoelectric sensors with protected solid-state relay output
Q45BW22 Series Features •
Advanced one-piece photoelectric sensors with outstanding optical performance and extremely rugged design
•
90 to 250V ac
•
Protected solid-state relay output; 300 mA max. load at up to 250V ac
•
Multiple sensing modes include: opposed, diffuse, retroreflective and convergent, plus glass and plastic fiber optic models
•
Switchable light/dark operate
•
Versatile plug-in modules available for output timing logic and/or signal strength display
•
Highly visible Power, Signal (AID™ System*), and Output indicator LEDs
•
Choice of prewired 2 m (6.5') or 9 m (30') unterminated cable, plus Mini-style or Micro-style quick-disconnect fittings
•
Versatile mounting options
•
Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 rating
R
*U.S. Patent no. 4356393 Because of their extremely high excess gain, these opposed-mode sensors are an excellent option for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing.
Infrared, 880 nm
Q45BW22 Series Opposed-Mode Emitter (E) and Receiver (R) Models Models
Range
Cable
Supply Output Voltage Type
Excess Gain
Beam Pattern Effective Beam: 13 mm
Q452E Emitter
2-wire 2m (6.5')
Q45BW22R Receiver
3-wire 2m (6.5') 60 m (200')
90 to 250V ac
Q452EQ Emitter
3-Pin Mini-style QD
Q452EQ1 Emitter
4-Pin Micro-style QD
Q45BW22RQ Receiver
3-Pin Mini-style QD
Q45BW22RQ1 Receiver
4-Pin Micro-style QD
NOTES:
1000
SPST Solidstate Relay
E X C E S S G A I N
Q45E/R
Q45E/R
Opposed Mode 100
1.5 m
60 in
Opposed Mode
1.0 m
40 in
0.5 m
20 in 0
0
10
0.5 m
20 in
1.0 m
40 in 60 in
1.5 m 0
1 0.1 m 0.33 ft
1.0 m 3.3 ft
10 m 33 ft
100 m 330 ft
12 m 40 ft
24 m 80 ft
36 m 120 ft
48 m 160 ft
60 m 200 ft
DISTANCE
DISTANCE
i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q452E W/30) ii) A model with a QD connector requires a mating cable; see page 10.
IMPORTANT: SEE SAFETY USE WARNING ON BACK PAGE Printed in USA
Aug 2013 04/01
P/N 37209 rev. D E
Q45BW22 Series The visible red sensing beam of these sensors makes them very easy to align. Model Q45BW22LP polarizes the emitted light and filters out unwanted reflections, making sensing possible in applications otherwise considered unsuited to retroreflective sensing. Performance is specified using the model BRT-3 3" reflector (see the Accessories section of your current Banner Photoelectric Sensors catalog for further information).
P Visible red, 680 nm Non-Polarized Polarized
Q45BW22 Series Retroreflective-Mode Models Models
Range
Cable
Supply Voltage
Output Type
Excess Gain
Beam Pattern
Non-Polarized 1000
Q45LV
Q45BW22LV Q45BW22LVQ
3-wire 2 m (6.5') 0.08 to 9 m (3" to 30')
Q45BW22LVQ1
3-Pin Mini-style QD
90 to 250V ac
SPST Solid-state Relay
4-Pin Micro-style QD
E X C E S S
Retroreflective Mode
100
Q45LV
75 mm
2.0 in
25 mm
1.0 in
0
G A I N
3.0 in
Retroreflective Mode
50 mm
With BRT-3 Reflector 1 .01 m .033 ft
.10 m .33 ft
1.0 m 3.3 ft
0
With BRT-3 Reflector
10 25 mm
1.0 in
50 mm
2.0 in
75 mm
10 m 33 ft
3.0 in 0
3m 10 ft
DISTANCE
6m 20 ft
9m 30 ft
12 m 40 ft
15 m 50 ft
DISTANCE
Polarized 1000
Q45LP
3-wire 2 m (6.5')
Q45BW22LP Q45BW22LPQ Q45BW22LPQ1
0.15 to 6 m (6" to 20')
3-Pin Mini-style QD 4-Pin Micro-style QD
90 to 250V ac
SPST Solid-state Relay
E X C E S S
Retroreflective Mode
100
Q45LP
75 mm
Retroreflective Mode
50 mm 25 mm
G A I N
With BRT-3 Reflector
1 .01 m .033 ft
.10 m .33 ft
1.0 m 3.3 ft
DISTANCE
10 m 33 ft
0
With BRT-3 Reflector
25 mm
1.0 in
50 mm
2.0 in
75 mm
3.0 in 0
1.5 m 5 ft
3m 10 ft
4.5 m 15 ft
6m 20 ft
7.5 m 25 ft
DISTANCE
NOTES: i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW22LV W/30) ii) A model with a QD connector requires a mating cable; see page 10.
page 2
2.0 in 1.0 in
0
10
3.0 in
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Q45BW22 Series
Infrared, 880 nm
These diffuse-mode models detect objects by sensing the reflection of their own emitted light. Ideal for use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage of emitted light back to the sensor. Model Q45BW22DX is the first choice for diffuse-mode applications when there are no background objects to falsely return light.
Q45BW22 Series Diffuse-Mode Models Models
Range
Cable
Supply Voltage
Output Type
Excess Gain
Beam Pattern
Performance based on 90% reflectance white test card
Short Range 1000
3-wire 2 m (6.5')
Q45BW22D Q45BW22DQ
45 cm (18")
3-Pin Mini-style QD
Q45D
E X C E S S
90 to 250V ac
SPST Solid-state Relay
0.6 in
Q45D
10 mm
100
0.4 in
Diffuse Mode
5 mm
0.2 in
0
10
G A I N
0
5 mm
0.2 in
10 mm
0.4 in
15 mm
4-Pin Micro-style QD
Q45BW22DQ1
15 mm
Diffuse Mode
1 1.0 mm 0.04 in
0.6 in 0
10 mm 0.4 in
100 mm 4.0 in
100 mm 200mm 300 mm 400 mm 500 mm 4.0 in 8.0 in 12.0 in 16.0 in 20.0 in
1000 mm 40 in
DISTANCE
DISTANCE
Long Range 1000
Q45DL
3-wire 2 m (6.5')
Q45BW22DL Q45BW22DLQ
E X C E S S
1. 8 m (6')
3-Pin Mini-style QD
90 to 250V ac
SPST Solid-state Relay
G A I N
Diffuse Mode
100
3.0 in
50 mm
2.0 in
25 mm
1.0 in 0
0
10
1 .01 m .033 ft
4-Pin Micro-style QD
Q45BW22DLQ1
Q45DL Diffuse Mode
75 mm
25 mm
1.0 in
50 mm
2.0 in
75 mm
3.0 in 0
.10 m .33 ft
1.0 m 3.3 ft
10 m 33 ft
0.6 m 2 ft
1.2 m 4 ft
1.8 m 6 ft
2.4 m 8 ft
3.0 m 10 ft
DISTANCE
DISTANCE
High Power 1000
3-wire 2 m (6.5')
Q45BW22DX Q45BW22DXQ Q45BW22DXQ1
3m (10')
3-Pin Mini-style QD 4-Pin Micro-style QD
90 to 250V ac
SPST Solid-state Relay
E X C E S S G A I N
Q45DX Diffuse Mode
3.0 in
Diffuse Mode
50 mm
2.0 in
25 mm
1.0 in
0
10
0
25 mm
1.0 in
50 mm
2.0 in
75 mm
1 0.01 m 0.033 ft
3.0 in 0
0.1 m 0.33 ft
1.0 m 3.3 ft
DISTANCE
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Q45DX
75 mm
100
10 m 33 ft
0.6 m 2 ft
1.2 m 4 ft
1.8 m 6 ft
2.4 m 8 ft
3.0 m 10 ft
DISTANCE
page 3
Q45BW22 Series These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately sense the position of parts approaching from the side. Will ignore all but highly reflective objects that are outside the sensing range.
Visible red, 680 nm
Q45BW22 Series Convergent-Mode Models Models
Focus
Cable
Supply Voltage
Output Type
Excess Gain
Beam Pattern
Performance based on 90% reflectance white test card 1000
Q45BW22CV Q45BW22CVQ Q45BW22CVQ1
38 mm (1.5") Spot Size at Focus: 1.3 mm (0.05")
3-wire 2 m (6.5') 3-Pin Mini-style QD
90 to 250V ac
SPST Solid-state Relay
4-Pin Micro-style QD
E X C E S S G A I N
Q45CV Convergent Mode
Q45CV
3.8 mm 2.5 mm
0.10 in
1.2 mm
0.05 in
0
10
1 1 mm .04 in
0.15 in
Convergent Mode
100
0
1.2 mm
0.05 in
2.5 mm
0.10 in
3.8 mm
0.15 in 0
10 mm .4 in
100 mm 4 in
1000 mm 40 in
38 mm 1.5 in
75 mm 113 mm 150 mm 190 mm 3.0 in 4.5 in 6.0 in 7.5 in
DISTANCE
DISTANCE 1000
Q45BW22CV4
100 mm (4")
Spot Size at Focus: Q45BW22CV4Q1 1.5 mm (0.06") Q45BW22CV4Q
3-wire 2 m (6.5') 3-Pin Mini-style QD 4-Pin Micro-style QD
90 to 250V ac
SPST Solid-state Relay
E X C E S S
Q45CV4 Convergent Mode
Q45CV4
3.8 mm
100
0.10 in
1.2 mm
0.05 in
0
G A I N
10
0
1.2 mm
0.05 in
2.5 mm
0.10 in
3.8 mm
1 1 mm .04 in
0.15 in
Convergent Mode 2.5 mm
10 mm .4 in
100 mm 4 in
DISTANCE
1000 mm 40 in
0.15 in 0
38 mm 1.5 in
75 mm 113 mm 150 mm 190 mm 3.0 in 4.5 in 6.0 in 7.5 in
DISTANCE
NOTES: i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW22CV W/30) ii) A model with a QD connector requires a mating cable; see page 10.
page 4
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Q45BW22 Series
Infrared, 880 nm and Visible Red, 650 nm
These models are an excellent choice for glass fiber optic applications where faster sensor response is not important. Their high excess gain means that opposed individual fibers can operate reliably in many very hostile environments. Also, special miniature bifurcated fiber optic assemblies with bundle sizes as small as .5 mm (.020") dia. may be used successfully for diffuse-mode sensing when using sensor model Q45BW22F(Q). For more information on compatible glass fiber optics, refer to your current Banner Photoelectric Sensors catalog.
Q45BW22 Series Glass Fiber-Optic Models Models
Range
Cable
Supply Voltage
Output Type
Excess Gain
Diffuse mode performance based on 90% reflectance white test card
Infrared, 880 nm
1000
E X C E S S G A I N
Q45BW22F Q45BW22FQ Q45BW22FQ1
Range varies by sensing mode and fiber optics used
Q45F
90 to 250V ac
SPST Solid-state Relay
4-Pin Micro-style QD
Q45F
150 mm
6.0 in
Opposed Mode
Opposed Mode
100 mm
100
4.0 in IT23S Fibers
50 mm 0
IT23S Fibers 10 IT13S Fibers
2.0 in 0
IT13S Fibers
50 mm
2.0 in
100 mm
4.0 in
150 mm
6.0 in 0
1 0.01 m 0.03 ft
3-wire 2 m (6.5') 3-Pin Mini-style QD
Beam Pattern
0.1 m 0.33 ft
1.0 m 3.3 ft
0.4 m 15 in
0.8 m 30 in
10 m 33 ft
1.2 m 45 in
1.6 m 60 in
2.0 m 75 in
DISTANCE
DISTANCE 1000
E X C E S S G A I N
Q45F Diffuse Mode
Q45F BP Q45F opp.eps 0.15 in Diffuse Mode 0.10 in
3.8 mm 2.5 mm
100
BT13S Fiber 1.3 mm
0.05 in BT23S Fiber
0
BT23S Fiber 10
BT13S Fiber 1 1 mm 0.04 in
0.05 in
2.5 mm
0.10 in
3.8 mm
0.15 in 0
10 mm 0.4 in
100 mm 4.0 in
0
1.3 mm
25 mm 1 in
1000 mm 40 in
50 mm 2 in
75 mm 100 mm 125 mm 3 in 4 in 5 in
DISTANCE
DISTANCE
Visible Red, 650 nm
1000
E X C E S S
Q45FV
Q45FV
30 mm Opposed Mode 100
Range varies by sensing Q45BW22FVQ mode and fiber Q45BW22FVQ1 optics used Q45BW22FV
10 mm
0.4 in
0
IT23S Fibers
3-Pin Mini-style QD 4-Pin Micro-style QD
10
0
90 to 250V ac
SPST Solid-state Relay
0.8 in
30 mm
1.2 in 0
10 mm 0.4 in
100 mm 4 in
100 mm 150 mm 200 mm 250 mm 300 mm 4 in 6 in 8 in 10 in 12 in
1000 mm 40 in
DISTANCE
DISTANCE 1000
E X C E S S G A I N
Q45FV Diffuse Mode
Q45FV
3.0 mm
0.08 in
1.0 mm
0.04 in BT13S Fiber
0
0
1.0 mm
10 BT13S Fiber
0.04 in BT23S Fiber
2.0 mm
0.12 in 0
10 mm 0.4 in
100 mm 4.0 in
DISTANCE
0.08 in
3.0 mm
BT23S Fiber
1000 mm 40 in
0.12 in
Diffuse Mode 2.0 mm
100
1 1 mm 0.04 in
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
0.4 in
IT13S Fibers
20 mm IT13S Fibers
1 1.0 mm 0.04 in
3-wire 2 m (6.5')
0.8 in
IT23S Fibers
10 mm
G A I N
1.2 in
Opposed Mode
20 mm
5 mm 0.2 in
10 mm 0.4 in
15 mm 0.6 in
20 mm 0.8 in
25 mm 1.0 in
DISTANCE
page 5
Q45BW22 Series Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where environmental conditions allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the field, and are available in a variety of sensing end styles. For more information on compatible plastic fiber optics, refer to your current Banner Photoelectric Sensors catalog. Visible red, 660 nm
Q45BW22 Series Plastic Fiber-Optic Models Models
Range
Cable
Supply Voltage
Output Type
Excess Gain
Beam Pattern
Diffuse mode performance based on 90% reflectance white test card 1000
E X C E S S
Q45FP
100
Q45BW22FP Q45BW22FPQ Q45BW22FPQ1
Range varies by sensing mode and fiber optics used
3-wire 2 m (6.5') 3-Pin Mini-style QD
90 to 250V ac
4-Pin Micro-style QD
1.2 in
PIT46U Fibers
0.6 in 0
0 PIT26U Fibers
10
15 mm
0.6 in
30 mm
1.2 in 1.8 in
45 mm
PIT26U Fibers 0
1 1 mm 0.04 in
SPST Solid-state Relay
1.8 in
Opposed Mode
30 mm 15 mm
PIT46U Fibers
G A I N
Q45FP
45 mm
Opposed Mode
10 mm 0.4 in
100 mm 4.0 in
25 mm 1.0 in
50 mm 2.0 in
1000 mm 40 in
75 mm 100 mm 125 mm 3.0 in 4.0 in 5.0 in
DISTANCE
DISTANCE 1000
E X C E S S G A I N
Q45FP Q45FP
18 mm
Diffuse Mode PBT46U Fiber
0.75 in
Diffuse Mode
12 mm
100
0.50 in PBT46U Fiber
6 mm
0.25 in
0
10
0
6 mm
0.25 in
12 mm
0.50 in
18 mm
PBT26U Fiber 1 0.1 mm 0.004 in
1 mm 0.04 in
0.75 in 0
10 mm 0.4 in
100 mm 4 in
10 mm 0.4 in
20 mm 0.8 in
30 mm 1.2 in
40 mm 1.6 in
50 mm 2.0 in
DISTANCE
NOTES: i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW22FP W/30) ii) A model with a QD connector requires a mating cable; see page 10.
page 6
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Q45BW22 Series Q45BW22 Series Specifications Supply Voltage and Current
90 to 250V ac (50 - 60 Hz). Average current 20 mA. Peak current 500 mA at 120C ac, 750 mA at 250V ac
Supply Protection Circuitry
Protected against transient voltages.
Output Configuration
Short circuit/overload protected FET solid-state relay
Output Rating
Continuous current: 300 mA max. to 50° C (derate to 200 mA at 70°C, 5 mA/°C) Inrush current: 3A max. for 100 milliseconds, 5A max. for 1 millisecond Off-state leakage current:
Q45BW22 Series Features •
Advanced one-piece photoelectric sensors with outstanding optical performance and extremely rugged design
•
90 to 250V ac
•
Protected solid-state relay output; 300 mA max. load at up to 250V ac
•
Multiple sensing modes include: opposed, diffuse, retroreflective and convergent, plus glass and plastic fiber optic models
•
Switchable light/dark operate
•
Versatile plug-in modules available for output timing logic and/or signal strength display
•
Highly visible Power, Signal (AID™ System*), and Output indicator LEDs
•
Choice of prewired 2 m (6.5') or 9 m (30') unterminated cable, plus Mini-style or Micro-style quick-disconnect fittings
•
Versatile mounting options
•
Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 rating
R
*U.S. Patent no. 4356393 Because of their extremely high excess gain, these opposed-mode sensors are an excellent option for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing.
Infrared, 880 nm
Q45BW22 Series Opposed-Mode Emitter (E) and Receiver (R) Models Models
Range
Cable
Supply Output Voltage Type
Excess Gain
Beam Pattern Effective Beam: 13 mm
Q452E Emitter
2-wire 2m (6.5')
Q45BW22R Receiver
3-wire 2m (6.5') 60 m (200')
90 to 250V ac
Q452EQ Emitter
3-Pin Mini-style QD
Q452EQ1 Emitter
4-Pin Micro-style QD
Q45BW22RQ Receiver
3-Pin Mini-style QD
Q45BW22RQ1 Receiver
4-Pin Micro-style QD
NOTES:
1000
SPST Solidstate Relay
E X C E S S G A I N
Q45E/R
Q45E/R
Opposed Mode 100
1.5 m
60 in
Opposed Mode
1.0 m
40 in
0.5 m
20 in 0
0
10
0.5 m
20 in
1.0 m
40 in 60 in
1.5 m 0
1 0.1 m 0.33 ft
1.0 m 3.3 ft
10 m 33 ft
100 m 330 ft
12 m 40 ft
24 m 80 ft
36 m 120 ft
48 m 160 ft
60 m 200 ft
DISTANCE
DISTANCE
i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q452E W/30) ii) A model with a QD connector requires a mating cable; see page 10.
IMPORTANT: SEE SAFETY USE WARNING ON BACK PAGE Printed in USA
Aug 2013 04/01
P/N 37209 rev. D E
Q45BW22 Series The visible red sensing beam of these sensors makes them very easy to align. Model Q45BW22LP polarizes the emitted light and filters out unwanted reflections, making sensing possible in applications otherwise considered unsuited to retroreflective sensing. Performance is specified using the model BRT-3 3" reflector (see the Accessories section of your current Banner Photoelectric Sensors catalog for further information).
P Visible red, 680 nm Non-Polarized Polarized
Q45BW22 Series Retroreflective-Mode Models Models
Range
Cable
Supply Voltage
Output Type
Excess Gain
Beam Pattern
Non-Polarized 1000
Q45LV
Q45BW22LV Q45BW22LVQ
3-wire 2 m (6.5') 0.08 to 9 m (3" to 30')
Q45BW22LVQ1
3-Pin Mini-style QD
90 to 250V ac
SPST Solid-state Relay
4-Pin Micro-style QD
E X C E S S
Retroreflective Mode
100
Q45LV
75 mm
2.0 in
25 mm
1.0 in
0
G A I N
3.0 in
Retroreflective Mode
50 mm
With BRT-3 Reflector 1 .01 m .033 ft
.10 m .33 ft
1.0 m 3.3 ft
0
With BRT-3 Reflector
10 25 mm
1.0 in
50 mm
2.0 in
75 mm
10 m 33 ft
3.0 in 0
3m 10 ft
DISTANCE
6m 20 ft
9m 30 ft
12 m 40 ft
15 m 50 ft
DISTANCE
Polarized 1000
Q45LP
3-wire 2 m (6.5')
Q45BW22LP Q45BW22LPQ Q45BW22LPQ1
0.15 to 6 m (6" to 20')
3-Pin Mini-style QD 4-Pin Micro-style QD
90 to 250V ac
SPST Solid-state Relay
E X C E S S
Retroreflective Mode
100
Q45LP
75 mm
Retroreflective Mode
50 mm 25 mm
G A I N
With BRT-3 Reflector
1 .01 m .033 ft
.10 m .33 ft
1.0 m 3.3 ft
DISTANCE
10 m 33 ft
0
With BRT-3 Reflector
25 mm
1.0 in
50 mm
2.0 in
75 mm
3.0 in 0
1.5 m 5 ft
3m 10 ft
4.5 m 15 ft
6m 20 ft
7.5 m 25 ft
DISTANCE
NOTES: i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW22LV W/30) ii) A model with a QD connector requires a mating cable; see page 10.
page 2
2.0 in 1.0 in
0
10
3.0 in
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Q45BW22 Series
Infrared, 880 nm
These diffuse-mode models detect objects by sensing the reflection of their own emitted light. Ideal for use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage of emitted light back to the sensor. Model Q45BW22DX is the first choice for diffuse-mode applications when there are no background objects to falsely return light.
Q45BW22 Series Diffuse-Mode Models Models
Range
Cable
Supply Voltage
Output Type
Excess Gain
Beam Pattern
Performance based on 90% reflectance white test card
Short Range 1000
3-wire 2 m (6.5')
Q45BW22D Q45BW22DQ
45 cm (18")
3-Pin Mini-style QD
Q45D
E X C E S S
90 to 250V ac
SPST Solid-state Relay
0.6 in
Q45D
10 mm
100
0.4 in
Diffuse Mode
5 mm
0.2 in
0
10
G A I N
0
5 mm
0.2 in
10 mm
0.4 in
15 mm
4-Pin Micro-style QD
Q45BW22DQ1
15 mm
Diffuse Mode
1 1.0 mm 0.04 in
0.6 in 0
10 mm 0.4 in
100 mm 4.0 in
100 mm 200mm 300 mm 400 mm 500 mm 4.0 in 8.0 in 12.0 in 16.0 in 20.0 in
1000 mm 40 in
DISTANCE
DISTANCE
Long Range 1000
Q45DL
3-wire 2 m (6.5')
Q45BW22DL Q45BW22DLQ
E X C E S S
1. 8 m (6')
3-Pin Mini-style QD
90 to 250V ac
SPST Solid-state Relay
G A I N
Diffuse Mode
100
3.0 in
50 mm
2.0 in
25 mm
1.0 in 0
0
10
1 .01 m .033 ft
4-Pin Micro-style QD
Q45BW22DLQ1
Q45DL Diffuse Mode
75 mm
25 mm
1.0 in
50 mm
2.0 in
75 mm
3.0 in 0
.10 m .33 ft
1.0 m 3.3 ft
10 m 33 ft
0.6 m 2 ft
1.2 m 4 ft
1.8 m 6 ft
2.4 m 8 ft
3.0 m 10 ft
DISTANCE
DISTANCE
High Power 1000
3-wire 2 m (6.5')
Q45BW22DX Q45BW22DXQ Q45BW22DXQ1
3m (10')
3-Pin Mini-style QD 4-Pin Micro-style QD
90 to 250V ac
SPST Solid-state Relay
E X C E S S G A I N
Q45DX Diffuse Mode
3.0 in
Diffuse Mode
50 mm
2.0 in
25 mm
1.0 in
0
10
0
25 mm
1.0 in
50 mm
2.0 in
75 mm
1 0.01 m 0.033 ft
3.0 in 0
0.1 m 0.33 ft
1.0 m 3.3 ft
DISTANCE
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Q45DX
75 mm
100
10 m 33 ft
0.6 m 2 ft
1.2 m 4 ft
1.8 m 6 ft
2.4 m 8 ft
3.0 m 10 ft
DISTANCE
page 3
Q45BW22 Series These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately sense the position of parts approaching from the side. Will ignore all but highly reflective objects that are outside the sensing range.
Visible red, 680 nm
Q45BW22 Series Convergent-Mode Models Models
Focus
Cable
Supply Voltage
Output Type
Excess Gain
Beam Pattern
Performance based on 90% reflectance white test card 1000
Q45BW22CV Q45BW22CVQ Q45BW22CVQ1
38 mm (1.5") Spot Size at Focus: 1.3 mm (0.05")
3-wire 2 m (6.5') 3-Pin Mini-style QD
90 to 250V ac
SPST Solid-state Relay
4-Pin Micro-style QD
E X C E S S G A I N
Q45CV Convergent Mode
Q45CV
3.8 mm 2.5 mm
0.10 in
1.2 mm
0.05 in
0
10
1 1 mm .04 in
0.15 in
Convergent Mode
100
0
1.2 mm
0.05 in
2.5 mm
0.10 in
3.8 mm
0.15 in 0
10 mm .4 in
100 mm 4 in
1000 mm 40 in
38 mm 1.5 in
75 mm 113 mm 150 mm 190 mm 3.0 in 4.5 in 6.0 in 7.5 in
DISTANCE
DISTANCE 1000
Q45BW22CV4
100 mm (4")
Spot Size at Focus: Q45BW22CV4Q1 1.5 mm (0.06") Q45BW22CV4Q
3-wire 2 m (6.5') 3-Pin Mini-style QD 4-Pin Micro-style QD
90 to 250V ac
SPST Solid-state Relay
E X C E S S
Q45CV4 Convergent Mode
Q45CV4
3.8 mm
100
0.10 in
1.2 mm
0.05 in
0
G A I N
10
0
1.2 mm
0.05 in
2.5 mm
0.10 in
3.8 mm
1 1 mm .04 in
0.15 in
Convergent Mode 2.5 mm
10 mm .4 in
100 mm 4 in
DISTANCE
1000 mm 40 in
0.15 in 0
38 mm 1.5 in
75 mm 113 mm 150 mm 190 mm 3.0 in 4.5 in 6.0 in 7.5 in
DISTANCE
NOTES: i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW22CV W/30) ii) A model with a QD connector requires a mating cable; see page 10.
page 4
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Q45BW22 Series
Infrared, 880 nm and Visible Red, 650 nm
These models are an excellent choice for glass fiber optic applications where faster sensor response is not important. Their high excess gain means that opposed individual fibers can operate reliably in many very hostile environments. Also, special miniature bifurcated fiber optic assemblies with bundle sizes as small as .5 mm (.020") dia. may be used successfully for diffuse-mode sensing when using sensor model Q45BW22F(Q). For more information on compatible glass fiber optics, refer to your current Banner Photoelectric Sensors catalog.
Q45BW22 Series Glass Fiber-Optic Models Models
Range
Cable
Supply Voltage
Output Type
Excess Gain
Diffuse mode performance based on 90% reflectance white test card
Infrared, 880 nm
1000
E X C E S S G A I N
Q45BW22F Q45BW22FQ Q45BW22FQ1
Range varies by sensing mode and fiber optics used
Q45F
90 to 250V ac
SPST Solid-state Relay
4-Pin Micro-style QD
Q45F
150 mm
6.0 in
Opposed Mode
Opposed Mode
100 mm
100
4.0 in IT23S Fibers
50 mm 0
IT23S Fibers 10 IT13S Fibers
2.0 in 0
IT13S Fibers
50 mm
2.0 in
100 mm
4.0 in
150 mm
6.0 in 0
1 0.01 m 0.03 ft
3-wire 2 m (6.5') 3-Pin Mini-style QD
Beam Pattern
0.1 m 0.33 ft
1.0 m 3.3 ft
0.4 m 15 in
0.8 m 30 in
10 m 33 ft
1.2 m 45 in
1.6 m 60 in
2.0 m 75 in
DISTANCE
DISTANCE 1000
E X C E S S G A I N
Q45F Diffuse Mode
Q45F BP Q45F opp.eps 0.15 in Diffuse Mode 0.10 in
3.8 mm 2.5 mm
100
BT13S Fiber 1.3 mm
0.05 in BT23S Fiber
0
BT23S Fiber 10
BT13S Fiber 1 1 mm 0.04 in
0.05 in
2.5 mm
0.10 in
3.8 mm
0.15 in 0
10 mm 0.4 in
100 mm 4.0 in
0
1.3 mm
25 mm 1 in
1000 mm 40 in
50 mm 2 in
75 mm 100 mm 125 mm 3 in 4 in 5 in
DISTANCE
DISTANCE
Visible Red, 650 nm
1000
E X C E S S
Q45FV
Q45FV
30 mm Opposed Mode 100
Range varies by sensing Q45BW22FVQ mode and fiber Q45BW22FVQ1 optics used Q45BW22FV
10 mm
0.4 in
0
IT23S Fibers
3-Pin Mini-style QD 4-Pin Micro-style QD
10
0
90 to 250V ac
SPST Solid-state Relay
0.8 in
30 mm
1.2 in 0
10 mm 0.4 in
100 mm 4 in
100 mm 150 mm 200 mm 250 mm 300 mm 4 in 6 in 8 in 10 in 12 in
1000 mm 40 in
DISTANCE
DISTANCE 1000
E X C E S S G A I N
Q45FV Diffuse Mode
Q45FV
3.0 mm
0.08 in
1.0 mm
0.04 in BT13S Fiber
0
0
1.0 mm
10 BT13S Fiber
0.04 in BT23S Fiber
2.0 mm
0.12 in 0
10 mm 0.4 in
100 mm 4.0 in
DISTANCE
0.08 in
3.0 mm
BT23S Fiber
1000 mm 40 in
0.12 in
Diffuse Mode 2.0 mm
100
1 1 mm 0.04 in
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
0.4 in
IT13S Fibers
20 mm IT13S Fibers
1 1.0 mm 0.04 in
3-wire 2 m (6.5')
0.8 in
IT23S Fibers
10 mm
G A I N
1.2 in
Opposed Mode
20 mm
5 mm 0.2 in
10 mm 0.4 in
15 mm 0.6 in
20 mm 0.8 in
25 mm 1.0 in
DISTANCE
page 5
Q45BW22 Series Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where environmental conditions allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the field, and are available in a variety of sensing end styles. For more information on compatible plastic fiber optics, refer to your current Banner Photoelectric Sensors catalog. Visible red, 660 nm
Q45BW22 Series Plastic Fiber-Optic Models Models
Range
Cable
Supply Voltage
Output Type
Excess Gain
Beam Pattern
Diffuse mode performance based on 90% reflectance white test card 1000
E X C E S S
Q45FP
100
Q45BW22FP Q45BW22FPQ Q45BW22FPQ1
Range varies by sensing mode and fiber optics used
3-wire 2 m (6.5') 3-Pin Mini-style QD
90 to 250V ac
4-Pin Micro-style QD
1.2 in
PIT46U Fibers
0.6 in 0
0 PIT26U Fibers
10
15 mm
0.6 in
30 mm
1.2 in 1.8 in
45 mm
PIT26U Fibers 0
1 1 mm 0.04 in
SPST Solid-state Relay
1.8 in
Opposed Mode
30 mm 15 mm
PIT46U Fibers
G A I N
Q45FP
45 mm
Opposed Mode
10 mm 0.4 in
100 mm 4.0 in
25 mm 1.0 in
50 mm 2.0 in
1000 mm 40 in
75 mm 100 mm 125 mm 3.0 in 4.0 in 5.0 in
DISTANCE
DISTANCE 1000
E X C E S S G A I N
Q45FP Q45FP
18 mm
Diffuse Mode PBT46U Fiber
0.75 in
Diffuse Mode
12 mm
100
0.50 in PBT46U Fiber
6 mm
0.25 in
0
10
0
6 mm
0.25 in
12 mm
0.50 in
18 mm
PBT26U Fiber 1 0.1 mm 0.004 in
1 mm 0.04 in
0.75 in 0
10 mm 0.4 in
100 mm 4 in
10 mm 0.4 in
20 mm 0.8 in
30 mm 1.2 in
40 mm 1.6 in
50 mm 2.0 in
DISTANCE
NOTES: i) 9 m (30') cables are available by adding suffix “W/30” to the model number of any cabled sensor (e.g., Q45BW22FP W/30) ii) A model with a QD connector requires a mating cable; see page 10.
page 6
Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164
Q45BW22 Series Q45BW22 Series Specifications Supply Voltage and Current
90 to 250V ac (50 - 60 Hz). Average current 20 mA. Peak current 500 mA at 120C ac, 750 mA at 250V ac
Supply Protection Circuitry
Protected against transient voltages.
Output Configuration
Short circuit/overload protected FET solid-state relay
Output Rating
Continuous current: 300 mA max. to 50° C (derate to 200 mA at 70°C, 5 mA/°C) Inrush current: 3A max. for 100 milliseconds, 5A max. for 1 millisecond Off-state leakage current:
