Quarter-Turn Reverse Parts Manual
1.8” (45mm), 2” (55mm), 2 1/2” (65mm), 3” (76mm), 3 1/3” (85mm)
Quarter-Turn Reverse Parts Manual
P1.00 VHH180/VHH180RT Serial No. 180001VHH200/VHH200RT Serial No. 110001VHH250/VHH250RT Serial No. 210001VHH300/VHH300RT Serial No. 310001VHH330/VHH330RT Serial No. 310001Order No. 105400YAK
HOW TO USE THE MANUAL This manual contains illustrations and parts lists of components and assemblies which make up the machine. Each page consists of the name of the assembly or component, a figure number, reference numbers, part numbers, part names, and the quantities of the parts used. Assembly or component name helps identify the illustration and parts list for each figure. This name also helps locate the general area of the machine where the assembly or component can be located. Figure numbers are used to identify each assembly or component and to group these assemblies or components into major categories. Reference numbers shown in a column refer to the numbered parts in the illustration. This ties the part in the illustration to the part number and description in the parts list.
An asterisk indicates information about the item has changed since the previous release of the parts manual. A note in the Remarks column often explains the change. Part numbers are used to identify individual parts or part assemblies. Part descriptions provide the name of the part, plus additional information such as dimensional specifications and what parts are grouped together to form part assemblies, which helps you identify the part(s). Quantities listed for each figure are only for that assembly or component and not the total used per machine. This parts manual is not intended to be a complete guide for machine service or repairs. Contact your Vermeer dealer for any of your service or technical requirements.
ORDERING PARTS Parts for repair or replacement are available through our network of authorized dealers located throughout the world. Use only authorized Vermeer parts for repair or replacement. Always give the serial number and
model number of the machine for which parts are being ordered. When ordering parts for component(s), which are not manufactured by Vermeer Corporation, also give the serial number of that component(s). Order all parts by part number, part name, and quantity needed.
UPDATING AND REORDERING MANUALS The parts lists, illustrations, and specifications in this manual are based on the latest information available at time of publication. Your machine may have product improvements and options not yet contained in this manual. Vermeer Corporation reserves the right to make changes at any time without notice or obligation to you.
Your dealer will receive notice of these changes and can assist you with accurate parts identification when ordering. A copy of this manual is supplied with each machine. Additional copies are available through your dealer. When ordering additional manuals, use the reorder number listed on the front cover and the quantity needed.
NOTICE TO OWNER – You are requested to notify Vermeer Corporation when you have purchased a used Vermeer machine. Notify the Customer Data Department by telephone: 800-829-0051 or 641-6283141; email: [email protected]; internet: www.vermeer.com or www.vermeerag.com; or, letter: Customer Data Dept., Vermeer Corporation, PO Box 200, Pella IA 50219 USA. Upon request, an owner of a used Vermeer machine will receive one free set of Operator’s, Maintenance and Parts manuals.
Quarter-Turn Reverse Piercing Tool
Table of Contents
Decals - Section 1 Safety/Cosmetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 1-1
VHH180 1.8" Components - Section 2 1.8" Quarter-Turn Reverse Pneumatic Piercing Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 2-1 1.8" VHH180 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 2-2
VHH200 2" Components - Section 3 2" Quarter-Turn Reverse Pneumatic Piercing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 3-1 2" VHH200 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 3-2
VHH250 2 1/2” Components - Section 4 2 1/2” Quarter-Turn Reverse Pneumatic Piercing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 4-1 2 1/2” VHH250 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 4-2
VHH300 3" Components - Section 5 3" Quarter-Turn Reverse Pneumatic Piercing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 5-1 3" VHH300 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 5-2
VHH330 3 1/3” Components - Section 6 3 1/3” Quarter-Turn Reverse Pneumatic Piercing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 6-1 3 1/3” VHH330 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 6-2
Oiler Components - Section 7 Oiler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 7-1
P1.00
Decals - Section 1
Quarter-Turn Reverse Piercing Tool Safety/Cosmetic Fig 1-1
P1.00
Quarter-Turn Reverse Piercing Tool
Decals - Section 1 Safety/Cosmetic Fig 1-1
REF. NO. *
PART NO.
DESCRIPTION
QTY.
REMARKS
1 2 3 4 5 6
7000D665 70000944 7000I944 70000684 7000I684 296379350
DECAL-1.75” YELLOW VERMEER LABEL DECAL-WARNING UND MOLES DECAL-WARNING (UG) DECAL-WARNING DECAL-WARNING DECAL - HOLE HAMMER
1 1 1 1 1 1
Domestic International Domestic International
P1.00
VHH180 1.8" Components - Section 2
Quarter-Turn Reverse Piercing Tool
1.8" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 2-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH180 1.8" Components - Section 2
1.8" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 2-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 34 35 35
P1.00
PART NO.
DESCRIPTION
QTY.
296379272 296379271 296379278 296379277 296379276 296379275 296379274 296379273 296379279 296379281 296379430 296379395 296379294 296379431 296379292 296379291 296379290 296379289 296379288 296379287 296379301 296379300 296379298 296379299 296379296 296379297 296379295 296379286 296379285 296379284 296264831 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379407
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 Thru 8
3 Required Includes Items 13 Thru 31
Includes Items 21 Thru 27
2 Required
2 Required
Domestic International Domestic International Includes Items 22 Thru 26
VHH180 1.8" Components - Section 2
Quarter-Turn Reverse Piercing Tool
1.8" VHH180 Service Tools Fig 2-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH180 1.8" Components - Section 2
1.8" VHH180 Service Tools Fig 2-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379413
1
2
296379358
3 4
296379361 296379359 296379415
ROCK HEAD FACTORY PRESS FIXTURE 1.8” & 2” SERVICE WRENCH SMALL 1.8” & 2” TOOLS SM WRENCH BOLTS 5/8-11X2” GR8 VALVE REMOVAL TOOL 1.8” & 2” 1.8” & 2” VHH SERVICE KIT
P1.00
REMARKS
1 6 1 1
Includes All Items Listed Above
VHH200 2" Components - Section 3
Quarter-Turn Reverse Piercing Tool
2" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 3-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH200 2" Components - Section 3
2" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 3-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 34 35 35
P1.00
PART NO.
DESCRIPTION
QTY.
296379303 296379302 296379309 296379308 296379307 296379306 296379305 296379304 296379310 296379312 296379311 296379396 296379325 296379324 296379292 296379322 296379290 296379289 296379288 296379318 296379332 296379300 296379298 296379299 296379296 296379297 296379295 296379286 296379316 296379315 296264831 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379408
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 Thru 8
3 Required Includes Items 13 Thru 31
Includes Items 21 Thru 27
2 Required
2 Required
Domestic International Domestic International Includes Items 22 Thru 26
VHH200 2" Components - Section 3
Quarter-Turn Reverse Piercing Tool
2" VHH200 Service Tools Fig 3-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH200 2" Components - Section 3
2" VHH200 Service Tools Fig 3-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379413
1
2
296379358
3 4
296379361 296379359 296379415
ROCK HEAD FACTORY PRESS FIXTURE 1.8” & 2” SERVICE WRENCH SMALL 1.8” & 2” TOOLS SM WRENCH BOLTS 5/8-11X2” GR8 VALVE REMOVAL TOOL 1.8” & 2” 1.8” & 2” VHH SERVICE KIT
P1.00
REMARKS
1 6 1 1
Includes All Items Listed Above
VHH250 2 1/2" Components - Section 4
Quarter-Turn Reverse Piercing Tool
2 1/2” Quarter-Turn Reverse Pneumatic Piercing Tool Fig 4-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH250 2 1/2" Components - Section 4
2 1/2” Quarter-Turn Reverse Pneumatic Piercing Tool Fig 4-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 36 36
P1.00
PART NO.
DESCRIPTION
QTY.
296379334 296379333 296379340 296379339 296379338 296379337 296379336 296379335 296379341 296379343 296379342 296379397 296379356 296379355 296379385 296379353 296379383 296379382 296379432 296379349 296379363 296379393 296379391 296379392 296379389 296379390 296379388 296379286 296379347 296379346 296379376 204933023 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379410
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP FITTING-PNEUMATIC DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS, & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 Thru 8
3 Required Includes Items 13 Thru 32
Includes Items 21 Thru 27
2 Required
2 Required
Domestic International Domestic International Includes Items 22 Thru 26
VHH250 2 1/2" Components - Section 4
Quarter-Turn Reverse Piercing Tool
2 1/2” VHH250 Service Tools Fig 4-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH250 2 1/2" Components - Section 4
2 1/2” VHH250 Service Tools Fig 4-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379414
1
2 3 4
296379345 296379351 296379362 296379416
2.5”, 3” & 3.3” QT ROCK HEAD FACTORY PRESS FIXTURE WRENCH 2.5”, 3” & 3.3” QT TOOLS LG WRENCH BOLT 5/8-11X2” GR8 2.5” QT VALVE REMOVAL TOOL 2.5”, 3” & 3.3” VHH SERVICE KIT
P1.00
1 6 1 1
REMARKS
Includes All Items Listed Above
VHH300 3" Components - Section 5
Quarter-Turn Reverse Piercing Tool
3" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 5-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH300 3" Components - Section 5
3" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 5-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 36 36
P1.00
PART NO.
DESCRIPTION
QTY.
296379365 296379364 296379371 296379370 296379369 296379368 296379367 296379366 296379372 296379374 296379373 296379398 296379387 296379386 296379385 296379384 296379383 296379382 296379381 296379380 296379394 296379393 296379391 296379392 296379389 296379390 296379388 296379379 296379378 296379377 296379376 204933023 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379410
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE 3” STD STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP FITTING - PNEUMATIC DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 thru 8
Requires 3 Includes Items 13 thru 32
Includes Items 21 Thru 27
Requires 2
Domestic International Domestic International Includes Items 22 Thru 26
VHH300 3" Components - Section 5
Quarter-Turn Reverse Piercing Tool
3" VHH300 Service Tools Fig 5-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH300 3" Components - Section 5
3" VHH300 Service Tools Fig 5-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379414
1
2 3 4
296379345 296379351 296379360 296379416
2.5”, 3” & 3.3” QT ROCK HEAD FACTORY PRESS FIXTURE WRENCH 2.5”, 3” & 3.3” QT TOOLS LG WRENCH BOLT 5/8-11X2” GR8 3” & 3.3” QT VALVE REMOVAL TOOL 2.5”, 3” & 3.3” VHH SERVICE KIT
P1.00
1 6 1 1
REMARKS
Includes All Items Listed Above
VHH330 3 1/3" Components - Section 6
Quarter-Turn Reverse Piercing Tool
3 1/3” Quarter-Turn Reverse Pneumatic Piercing Tool Fig 6-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH330 3 1/3" Components - Section 6
3 1/3” Quarter-Turn Reverse Pneumatic Piercing Tool Fig 6-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 36 36
P1.00
PART NO.
DESCRIPTION
QTY.
296379365 296379364 296379371 296379370 296379369 296379368 296379367 296379366 296379435 296379374 296379373 296379398 296379387 296379386 296379385 296379384 296379383 296379382 296379381 296379380 296379394 296379393 296379391 296379392 296379389 296379390 296379388 296379379 296379378 296379377 296379376 204933023 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379410
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE 3.3” STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP FITTING - PNEUMATIC DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 thru 8
Requires 3 Includes Items 13 thru 32
Includes Items 21 Thru 27
Requires 2
Domestic International Domestic International Includes Items 22 Thru 26
VHH330 3 1/3" Components - Section 6
Quarter-Turn Reverse Piercing Tool
3 1/3” VHH330 Service Tools Fig 6-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH330 3 1/3" Components - Section 6
3 1/3” VHH330 Service Tools Fig 6-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379414
1
2 3 4
296379345 296379351 296379360 296379416
2.5”, 3” & 3.3” QT ROCK HEAD FACTORY PRESS FIXTURE WRENCH 2.5”, 3” & 3.3” QT TOOLS LG WRENCH BOLT 5/8-11X2” GR8 3” & 3.3” QT VALVE REMOVAL TOOL 2.5”, 3” & 3.3” VHH SERVICE KIT
P1.00
1 6 1 1
REMARKS
Includes All Items Listed Above
Quarter-Turn Reverse Piercing Tool
Oiler Components - Section 7 Oiler Fig 7-1
P1.00
Quarter-Turn Reverse Piercing Tool
Oiler Components - Section 7 Oiler Fig 7-1
REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 16 16
P1.00
PART NO.
DESCRIPTION
QTY.
REMARKS
205154005 205154007 296379260 205154003 3379001 736007 296386421 296379258 208567001 213827001 213826001 205154011 241107001 103201001 296379259 70000944 7000I944 70000684 7000I684
FITTING GASKET SAFETY CLIP STRING-POLY 1 16X27 FITTING-CLAW FITTING-MALE VALVE - 3/4in BALL - 101R NPT NIPPLE-3/4” CLOSE BLACK STEEL U - BOLT-1/4-20 2.25 TALL OILER (3/4” FNPT PORTS) OILER VALVE W/O-RING FEMALE SOCKET/QUICK REV.KIT MALE PLUG/QUICK REV.KIT PNEUMATIC FITTING O-RING NUT-1/4-20NC NYLON INSERT LOCK OILER BRACKET DECAL-WARNING UND MOLES DECAL-WARNING DECAL-WARNING DECAL-WARNING
1 2 1 1 1 1 2 1 1 1 1 1 1 4 1 1 1 1 1
Domestic International Domestic International
NOTES:________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________
No part of this manual may be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval systems, without the express written consent of Vermeer Corporation. Copyright 2014 McLaughlin Group, Inc. All rights reserved. McLaughlin Group, Inc. 2006 Perimeter Rd. Greenville, SC 29605, USA
Quarter-Turn Reverse Parts Manual
P1.00 VHH180/VHH180RT Serial No. 180001VHH200/VHH200RT Serial No. 110001VHH250/VHH250RT Serial No. 210001VHH300/VHH300RT Serial No. 310001VHH330/VHH330RT Serial No. 310001Order No. 105400YAK
HOW TO USE THE MANUAL This manual contains illustrations and parts lists of components and assemblies which make up the machine. Each page consists of the name of the assembly or component, a figure number, reference numbers, part numbers, part names, and the quantities of the parts used. Assembly or component name helps identify the illustration and parts list for each figure. This name also helps locate the general area of the machine where the assembly or component can be located. Figure numbers are used to identify each assembly or component and to group these assemblies or components into major categories. Reference numbers shown in a column refer to the numbered parts in the illustration. This ties the part in the illustration to the part number and description in the parts list.
An asterisk indicates information about the item has changed since the previous release of the parts manual. A note in the Remarks column often explains the change. Part numbers are used to identify individual parts or part assemblies. Part descriptions provide the name of the part, plus additional information such as dimensional specifications and what parts are grouped together to form part assemblies, which helps you identify the part(s). Quantities listed for each figure are only for that assembly or component and not the total used per machine. This parts manual is not intended to be a complete guide for machine service or repairs. Contact your Vermeer dealer for any of your service or technical requirements.
ORDERING PARTS Parts for repair or replacement are available through our network of authorized dealers located throughout the world. Use only authorized Vermeer parts for repair or replacement. Always give the serial number and
model number of the machine for which parts are being ordered. When ordering parts for component(s), which are not manufactured by Vermeer Corporation, also give the serial number of that component(s). Order all parts by part number, part name, and quantity needed.
UPDATING AND REORDERING MANUALS The parts lists, illustrations, and specifications in this manual are based on the latest information available at time of publication. Your machine may have product improvements and options not yet contained in this manual. Vermeer Corporation reserves the right to make changes at any time without notice or obligation to you.
Your dealer will receive notice of these changes and can assist you with accurate parts identification when ordering. A copy of this manual is supplied with each machine. Additional copies are available through your dealer. When ordering additional manuals, use the reorder number listed on the front cover and the quantity needed.
NOTICE TO OWNER – You are requested to notify Vermeer Corporation when you have purchased a used Vermeer machine. Notify the Customer Data Department by telephone: 800-829-0051 or 641-6283141; email: [email protected]; internet: www.vermeer.com or www.vermeerag.com; or, letter: Customer Data Dept., Vermeer Corporation, PO Box 200, Pella IA 50219 USA. Upon request, an owner of a used Vermeer machine will receive one free set of Operator’s, Maintenance and Parts manuals.
Quarter-Turn Reverse Piercing Tool
Table of Contents
Decals - Section 1 Safety/Cosmetic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 1-1
VHH180 1.8" Components - Section 2 1.8" Quarter-Turn Reverse Pneumatic Piercing Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 2-1 1.8" VHH180 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 2-2
VHH200 2" Components - Section 3 2" Quarter-Turn Reverse Pneumatic Piercing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 3-1 2" VHH200 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 3-2
VHH250 2 1/2” Components - Section 4 2 1/2” Quarter-Turn Reverse Pneumatic Piercing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 4-1 2 1/2” VHH250 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 4-2
VHH300 3" Components - Section 5 3" Quarter-Turn Reverse Pneumatic Piercing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 5-1 3" VHH300 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 5-2
VHH330 3 1/3” Components - Section 6 3 1/3” Quarter-Turn Reverse Pneumatic Piercing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 6-1 3 1/3” VHH330 Service Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 6-2
Oiler Components - Section 7 Oiler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fig 7-1
P1.00
Decals - Section 1
Quarter-Turn Reverse Piercing Tool Safety/Cosmetic Fig 1-1
P1.00
Quarter-Turn Reverse Piercing Tool
Decals - Section 1 Safety/Cosmetic Fig 1-1
REF. NO. *
PART NO.
DESCRIPTION
QTY.
REMARKS
1 2 3 4 5 6
7000D665 70000944 7000I944 70000684 7000I684 296379350
DECAL-1.75” YELLOW VERMEER LABEL DECAL-WARNING UND MOLES DECAL-WARNING (UG) DECAL-WARNING DECAL-WARNING DECAL - HOLE HAMMER
1 1 1 1 1 1
Domestic International Domestic International
P1.00
VHH180 1.8" Components - Section 2
Quarter-Turn Reverse Piercing Tool
1.8" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 2-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH180 1.8" Components - Section 2
1.8" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 2-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 34 35 35
P1.00
PART NO.
DESCRIPTION
QTY.
296379272 296379271 296379278 296379277 296379276 296379275 296379274 296379273 296379279 296379281 296379430 296379395 296379294 296379431 296379292 296379291 296379290 296379289 296379288 296379287 296379301 296379300 296379298 296379299 296379296 296379297 296379295 296379286 296379285 296379284 296264831 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379407
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 Thru 8
3 Required Includes Items 13 Thru 31
Includes Items 21 Thru 27
2 Required
2 Required
Domestic International Domestic International Includes Items 22 Thru 26
VHH180 1.8" Components - Section 2
Quarter-Turn Reverse Piercing Tool
1.8" VHH180 Service Tools Fig 2-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH180 1.8" Components - Section 2
1.8" VHH180 Service Tools Fig 2-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379413
1
2
296379358
3 4
296379361 296379359 296379415
ROCK HEAD FACTORY PRESS FIXTURE 1.8” & 2” SERVICE WRENCH SMALL 1.8” & 2” TOOLS SM WRENCH BOLTS 5/8-11X2” GR8 VALVE REMOVAL TOOL 1.8” & 2” 1.8” & 2” VHH SERVICE KIT
P1.00
REMARKS
1 6 1 1
Includes All Items Listed Above
VHH200 2" Components - Section 3
Quarter-Turn Reverse Piercing Tool
2" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 3-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH200 2" Components - Section 3
2" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 3-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 34 35 35
P1.00
PART NO.
DESCRIPTION
QTY.
296379303 296379302 296379309 296379308 296379307 296379306 296379305 296379304 296379310 296379312 296379311 296379396 296379325 296379324 296379292 296379322 296379290 296379289 296379288 296379318 296379332 296379300 296379298 296379299 296379296 296379297 296379295 296379286 296379316 296379315 296264831 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379408
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 Thru 8
3 Required Includes Items 13 Thru 31
Includes Items 21 Thru 27
2 Required
2 Required
Domestic International Domestic International Includes Items 22 Thru 26
VHH200 2" Components - Section 3
Quarter-Turn Reverse Piercing Tool
2" VHH200 Service Tools Fig 3-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH200 2" Components - Section 3
2" VHH200 Service Tools Fig 3-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379413
1
2
296379358
3 4
296379361 296379359 296379415
ROCK HEAD FACTORY PRESS FIXTURE 1.8” & 2” SERVICE WRENCH SMALL 1.8” & 2” TOOLS SM WRENCH BOLTS 5/8-11X2” GR8 VALVE REMOVAL TOOL 1.8” & 2” 1.8” & 2” VHH SERVICE KIT
P1.00
REMARKS
1 6 1 1
Includes All Items Listed Above
VHH250 2 1/2" Components - Section 4
Quarter-Turn Reverse Piercing Tool
2 1/2” Quarter-Turn Reverse Pneumatic Piercing Tool Fig 4-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH250 2 1/2" Components - Section 4
2 1/2” Quarter-Turn Reverse Pneumatic Piercing Tool Fig 4-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 36 36
P1.00
PART NO.
DESCRIPTION
QTY.
296379334 296379333 296379340 296379339 296379338 296379337 296379336 296379335 296379341 296379343 296379342 296379397 296379356 296379355 296379385 296379353 296379383 296379382 296379432 296379349 296379363 296379393 296379391 296379392 296379389 296379390 296379388 296379286 296379347 296379346 296379376 204933023 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379410
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP FITTING-PNEUMATIC DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS, & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 Thru 8
3 Required Includes Items 13 Thru 32
Includes Items 21 Thru 27
2 Required
2 Required
Domestic International Domestic International Includes Items 22 Thru 26
VHH250 2 1/2" Components - Section 4
Quarter-Turn Reverse Piercing Tool
2 1/2” VHH250 Service Tools Fig 4-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH250 2 1/2" Components - Section 4
2 1/2” VHH250 Service Tools Fig 4-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379414
1
2 3 4
296379345 296379351 296379362 296379416
2.5”, 3” & 3.3” QT ROCK HEAD FACTORY PRESS FIXTURE WRENCH 2.5”, 3” & 3.3” QT TOOLS LG WRENCH BOLT 5/8-11X2” GR8 2.5” QT VALVE REMOVAL TOOL 2.5”, 3” & 3.3” VHH SERVICE KIT
P1.00
1 6 1 1
REMARKS
Includes All Items Listed Above
VHH300 3" Components - Section 5
Quarter-Turn Reverse Piercing Tool
3" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 5-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH300 3" Components - Section 5
3" Quarter-Turn Reverse Pneumatic Piercing Tool Fig 5-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 36 36
P1.00
PART NO.
DESCRIPTION
QTY.
296379365 296379364 296379371 296379370 296379369 296379368 296379367 296379366 296379372 296379374 296379373 296379398 296379387 296379386 296379385 296379384 296379383 296379382 296379381 296379380 296379394 296379393 296379391 296379392 296379389 296379390 296379388 296379379 296379378 296379377 296379376 204933023 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379410
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE 3” STD STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP FITTING - PNEUMATIC DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 thru 8
Requires 3 Includes Items 13 thru 32
Includes Items 21 Thru 27
Requires 2
Domestic International Domestic International Includes Items 22 Thru 26
VHH300 3" Components - Section 5
Quarter-Turn Reverse Piercing Tool
3" VHH300 Service Tools Fig 5-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH300 3" Components - Section 5
3" VHH300 Service Tools Fig 5-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379414
1
2 3 4
296379345 296379351 296379360 296379416
2.5”, 3” & 3.3” QT ROCK HEAD FACTORY PRESS FIXTURE WRENCH 2.5”, 3” & 3.3” QT TOOLS LG WRENCH BOLT 5/8-11X2” GR8 3” & 3.3” QT VALVE REMOVAL TOOL 2.5”, 3” & 3.3” VHH SERVICE KIT
P1.00
1 6 1 1
REMARKS
Includes All Items Listed Above
VHH330 3 1/3" Components - Section 6
Quarter-Turn Reverse Piercing Tool
3 1/3” Quarter-Turn Reverse Pneumatic Piercing Tool Fig 6-1
P1.00
Quarter-Turn Reverse Piercing Tool
VHH330 3 1/3" Components - Section 6
3 1/3” Quarter-Turn Reverse Pneumatic Piercing Tool Fig 6-1 REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 36 36
P1.00
PART NO.
DESCRIPTION
QTY.
296379365 296379364 296379371 296379370 296379369 296379368 296379367 296379366 296379435 296379374 296379373 296379398 296379387 296379386 296379385 296379384 296379383 296379382 296379381 296379380 296379394 296379393 296379391 296379392 296379389 296379390 296379388 296379379 296379378 296379377 296379376 204933023 7000D665 296379350 70000684 7000I684 70000944 7000I944 296379410
REPLACEABLE HEAD ROCK HEAD ASSEMBLY BIT SHAFT LOCK NUT STEPPED HEAD HEAD SEAL FRONT ANVIL HEAD SPRING BIT SHAFT BODY TUBE 3.3” STRIKER RING STRIKER REVERSE MECHANISM ASSEMBLY VALVE RING VALVE VALVE BUSHING REAR ANVIL E-CLIP SPRING RETAINER VALVE CONTROL SPRING CONTROL STEM ASSEMBLY FRONT CONTROL STEM FRONT BUSHING CUP BUSHING (2 REQUIRED) CONTROL CAM DOWEL PIN CONTROL STEM REAR BUSHING CUP REAR CONTROL STEM DOWEL PIN REAR ANVIL INTERMEDIATE SPACER TAIL CONE SERVICEABLE REAR HOSE WHIP FITTING - PNEUMATIC DECAL - 1.75” YELLOW VERMEER DECAL - HOLE HAMMER DECAL-WARNING DECAL-WARNING DECAL-WARNING UND MOLES DECAL-WARNING CAM, CUPS & BUSHING KIT
1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1
REMARKS Includes Items 3 thru 8
Requires 3 Includes Items 13 thru 32
Includes Items 21 Thru 27
Requires 2
Domestic International Domestic International Includes Items 22 Thru 26
VHH330 3 1/3" Components - Section 6
Quarter-Turn Reverse Piercing Tool
3 1/3” VHH330 Service Tools Fig 6-2
P1.00
Quarter-Turn Reverse Piercing Tool
VHH330 3 1/3" Components - Section 6
3 1/3” VHH330 Service Tools Fig 6-2 REF. NO. *
PART NO.
DESCRIPTION
QTY.
1
296379414
1
2 3 4
296379345 296379351 296379360 296379416
2.5”, 3” & 3.3” QT ROCK HEAD FACTORY PRESS FIXTURE WRENCH 2.5”, 3” & 3.3” QT TOOLS LG WRENCH BOLT 5/8-11X2” GR8 3” & 3.3” QT VALVE REMOVAL TOOL 2.5”, 3” & 3.3” VHH SERVICE KIT
P1.00
1 6 1 1
REMARKS
Includes All Items Listed Above
Quarter-Turn Reverse Piercing Tool
Oiler Components - Section 7 Oiler Fig 7-1
P1.00
Quarter-Turn Reverse Piercing Tool
Oiler Components - Section 7 Oiler Fig 7-1
REF. NO. * 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 15 16 16
P1.00
PART NO.
DESCRIPTION
QTY.
REMARKS
205154005 205154007 296379260 205154003 3379001 736007 296386421 296379258 208567001 213827001 213826001 205154011 241107001 103201001 296379259 70000944 7000I944 70000684 7000I684
FITTING GASKET SAFETY CLIP STRING-POLY 1 16X27 FITTING-CLAW FITTING-MALE VALVE - 3/4in BALL - 101R NPT NIPPLE-3/4” CLOSE BLACK STEEL U - BOLT-1/4-20 2.25 TALL OILER (3/4” FNPT PORTS) OILER VALVE W/O-RING FEMALE SOCKET/QUICK REV.KIT MALE PLUG/QUICK REV.KIT PNEUMATIC FITTING O-RING NUT-1/4-20NC NYLON INSERT LOCK OILER BRACKET DECAL-WARNING UND MOLES DECAL-WARNING DECAL-WARNING DECAL-WARNING
1 2 1 1 1 1 2 1 1 1 1 1 1 4 1 1 1 1 1
Domestic International Domestic International
NOTES:________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________ _______________________________________
No part of this manual may be reproduced in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval systems, without the express written consent of Vermeer Corporation. Copyright 2014 McLaughlin Group, Inc. All rights reserved. McLaughlin Group, Inc. 2006 Perimeter Rd. Greenville, SC 29605, USA
