Rainwater Pumping Station Viernheim

Report 2 Downloads 148 Views
Rainwater Pumping Station Viernheim Viernheim, Germany

The rainwater pumping station is the main pumping station of the City of Viernheim. Water for 32.300 inhabitants and rainwater from an area of 720 ha flows into it. During dry periods, the waste water is pumped at a rate of 8.000 – 10.0000 m3/day to the sewage treatment plant Weinheim via 6 speed regulated pumps. During rainy weather the inflow of water may rise dramatically. This inflow cannot be managed by the small waste water pumps. In this case the water is pumped by 7 rainwater pumps of each 400 kW to rainwater basins. Afterwards, the rainwater is pumped to the sewage plantby the smaller speed controlled pumps. Especially during rainy weather, no interruptions of pump operation are permitted as this may cause flooding of the City of Viernheim. The available power supply from the grid is not sufficient to start and to operate more than one rainwater pump. Due to this reason and due to the necessity of 100% availability of the pumps the power supply of the pumping station is secured by 6 diesel generators of each 700 kW. The pumping station works completely automatically. Staff is present only during the daytime.

IndustrialIT for Water Plant Management

Technical Specification / ABB Scope:

„

Redundant control and automation systems

„

28 Panels LV main distribution board

„

SCADA

„

30 Panels LV MCC’s with UPS and frequency converters

„

Reporting system

„

6 Generator controls with cos ϕ regulation

„

Telemetry system

„

Rehabiltion of starters and diesel fuel injection of diesel motors

„

Erection and cabling

„

Measurement systems

The project was completed in April 2004. The IndustrialIT wordmark and all mentioned product names in the form XXXXXXIT are registered or pending trademarks of ABB.

ABB AG P.O. Box 10 03 51 68128 Mannheim GERMANY Phone: +49 (0) 621 381-3000 Fax: +49 (0) 621 381-2645 E-mail: [email protected] Internet: www.abb.com/water

NOTE: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction – in whole or in parts – is forbidden without ABB's prior written consent. Copyright© 2007 ABB All rights reserved.

DEABB 1305 06 E Printed in Germany

„