Removing the Behringer Eurolive B212D Electronics Box
Removing the Behringer Eurolive B212D Electronics Box
Removing the Behringer Eurolive B212D Electronics Box Access the speaker case's internals by removing the electronics box attached to the back panel.
Written By: gameslammer7
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Removing the Behringer Eurolive B212D Electronics Box
INTRODUCTION Your B212D contains a case filled with a metal box that contains all the electronics, except for the speakers. You will be removing this electronics box to access the case's internal space - you know, in case you need to stash $1,000,000 dollars in there to hide it from the CIA! :)
TOOLS: Phillips #2 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Removing the Behringer Eurolive B212D Electronics Box
Step 1 — Removing the Behringer Eurolive B212D Electronics Box
Unplug your speaker from the power outlet.
Remove the 8 Phillips screws from the back of the speaker.
Carefully remove the back panel, lifting out the metal electronics-box with it.
Step 2
To avoid damaging your speaker, remove slowly, as there is still a wire attached from the electronics box to the speaker.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-25 04:25:48 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
Removing the Behringer Eurolive B212D Electronics Box Access the speaker case's internals by removing the electronics box attached to the back panel.
Written By: gameslammer7
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 3
Removing the Behringer Eurolive B212D Electronics Box
INTRODUCTION Your B212D contains a case filled with a metal box that contains all the electronics, except for the speakers. You will be removing this electronics box to access the case's internal space - you know, in case you need to stash $1,000,000 dollars in there to hide it from the CIA! :)
TOOLS: Phillips #2 Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 3
Removing the Behringer Eurolive B212D Electronics Box
Step 1 — Removing the Behringer Eurolive B212D Electronics Box
Unplug your speaker from the power outlet.
Remove the 8 Phillips screws from the back of the speaker.
Carefully remove the back panel, lifting out the metal electronics-box with it.
Step 2
To avoid damaging your speaker, remove slowly, as there is still a wire attached from the electronics box to the speaker.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-25 04:25:48 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 3
