RENAISSANCE B Y The name alone means “rebirth” and this elegant and classic portfolio will invigorate the visage of any room with the luxurious look of marble. Offered in a high gloss ceramic wall tile and a satin finished porcelain floor tile, this line is available in four classic colors that look as though they were mined from marble quarries around the world. A 10x13 wall tile, along with two sizes of porcelain floor tile with coordinating listellos and inserts complete the finishing details and add total versatility. ceramic wall (Wall tile and wall trims have a gloss finish) 10 x 13
24811 Grigio
24830 Crema
24895 Brun
24824 Nocé
24830 Crema
24895 Brun
24824 Nocé
24830 Crema
24895 Brun
24824/M12 Nocé Mosaic
24830/M12 Crema Mosaic
24895/M12 Brun Mosaic
24824 Nocé
glazed porcelain floor (Floor tile and mosaics have a natural finish) 12 x 12
RENAISSANCE B Y Typical Uses Renaissance glazed porcelain floor and ceramic wall tile is appropriate for all residential and commercial wall, countertop and backsplash applications as well as all residential floor applications. Ceramic wall tile is appropriate for all interior wall, countertop and backsplash applications.
Nominal Size1 Thickness3 10” x 13” 8.5 mm 12” x 12” 8.5 mm 18” x 18” 9.5 mm
Metric (cm) 25 x 33 30 x 30 45 x 45
Pcs./Sq Ft2 1.11 1 .44
These values may vary from lot to lot. These values are based on actual sizes including the grout joint. 3 May not apply to textured surfaces or tiles with uneven back patterns. 1 2
Made in the USA: With the exception of select trim, decorative and ceramic pieces, this product line is Made in the USA of 40% pre-consumer recycled content, is GREENGUARD® and Porcelain Tile Certified. Notice: Not all flooring products are suitable for wet areas, specialized applications or commercial use. Please refer to the American National Standard Specifications for Ceramic tile (ANSI A137.1) for ceramic, stone and glass installation for specific usage and installation information. This Florida Tile Product will contribute to USGBC LEED points and the ANSI approved NAHB Green Building Points.
Properties (Floor)
ASTM
ANSI
DCOF AcuTest
A137.1
>0.42 Fail
Visible Abrasion Resistance
C1027
As Reported
Class IV
Surface Hardness
Mohs Scale
N/A
7 Mohs
Break Strength
C-648
250 lbs.
400 lbf. avg.
Water Absorption
C-373
≤0.5%
≤0.5%
2
Results1 3
Trim
Shape
SKU
Nominal Size Metric
Bullnose
P43C9
3” x 12”
7.5 x 30
Bullnose
S43A9
3” x 10”
7.5 x 25
Bullnose
SN4339
3” x 3”
7.5 x 7.5
Quarter Round
A113
13.25” x 1”
33.6 x 2.5
Quarter Round Corner
AZ108
1” x 1”
2.5 x 2.5
Color Variations Color reproductions in this printed piece may vary from actual tile colors. Final selection should be made from actual tile samples.
These tests are performed by a 3rd party testing lab using industry standard equipment and techniques. Values are offered in good faith as being accurate and typical of normal production. Due to the natural variation of raw materials and manufacturing processes, the values of the purchased product for any particular installation may vary. 2 ANSI A137.1 standard, ceramic tiles selected for level interior spaces expected to be walked upon when wet must have a minimum wet DCOF AcuTest value of 0.42. 3 Class 0 Not recommended for floors, Class I Light Residential, Class II Residential, Class III Heavy Residential or Light Commercial, Class IV Commercial, Class V Heavy Commercial. 1
# 48817RA 8/15
www.floridatile.com
V2 = Slight Variation
Clearly distinguishable differences in texture and/or pattern with similar colors. Recycled Content