Repairing PlayStation 3 Slim Ripped of Fan Connector

Repairing PlayStation 3 Slim Ripped of Fan Connector

Repairing PlayStation 3 Slim Ripped of Fan Connector If you ripped off your Fan Connector, here is a Guide which will show you how bypass/fix it.

Written By: Robert Baskiewicz

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Repairing PlayStation 3 Slim Ripped of Fan Connector

Step 1 — Repairing PlayStation 3 Slim Ripped of Fan Connector 

Solder 3 wires to the 3 Points on the Backside of the Mainboard. The 3 Points are right under the Fan Connector on the other side.



Use some Tape to fix the wires on the Board. As you can see, i used the gap on the right to get the wires to the other side.

Step 2

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Repairing PlayStation 3 Slim Ripped of Fan Connector

Step 3 

This is the upper side of the Mainboard, you can/should also use some Tape to fix the position of the wires. Also you can see, i glued the connector back on the board (no electrical connection).



Solder the wires to the Connector you glued on the Mainboard, or directly to the fan or any other idea you can come up with.

Step 4

This document was last generated on 2017-06-17 09:38:25 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3