RIM BlackBerry 7510 Disassembly
RIM BlackBerry 7510 Disassembly
RIM BlackBerry 7510 Disassembly Written By: Laura Yanez
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 10
RIM BlackBerry 7510 Disassembly
INTRODUCTION This guide will show how to disassemble the Blackberry.
TOOLS: T5 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 10
RIM BlackBerry 7510 Disassembly
Step 1 — RIM BlackBerry 7510
Remove the back cover exposing the battery, and remove the battery.
Remove the six screws with the screwdriver using the T-5 tip.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 10
RIM BlackBerry 7510 Disassembly
Step 3
Pry open back cover
Lift off the back cover.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 10
RIM BlackBerry 7510 Disassembly
Step 5
Unscrew the two screws with a T-6 screwdriver head
Remove chip
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 10
RIM BlackBerry 7510 Disassembly
Step 7
Unscrew to remove the back plate
Carefully pry off back plate
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 10
RIM BlackBerry 7510 Disassembly
Step 9
Take off front cover and keypad
Remove one screw in the front.
Step 10
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 10
RIM BlackBerry 7510 Disassembly
Step 11
Pry the two parts apart.
The screen is now apart from the phone.
Step 12
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 10
RIM BlackBerry 7510 Disassembly
Step 13
Using the Philips screwdriver unscrew center screw.
The final two parts now come apart.
Step 14
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 10
RIM BlackBerry 7510 Disassembly
Step 15
The phone is now completely disassembled. Handle back with care shown piece comes right off.
Your blackberry has been fully disassembled.
Step 16
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-08 02:27:30 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 10 of 10
RIM BlackBerry 7510 Disassembly Written By: Laura Yanez
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 10
RIM BlackBerry 7510 Disassembly
INTRODUCTION This guide will show how to disassemble the Blackberry.
TOOLS: T5 Torx Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 10
RIM BlackBerry 7510 Disassembly
Step 1 — RIM BlackBerry 7510
Remove the back cover exposing the battery, and remove the battery.
Remove the six screws with the screwdriver using the T-5 tip.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 10
RIM BlackBerry 7510 Disassembly
Step 3
Pry open back cover
Lift off the back cover.
Step 4
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 10
RIM BlackBerry 7510 Disassembly
Step 5
Unscrew the two screws with a T-6 screwdriver head
Remove chip
Step 6
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 10
RIM BlackBerry 7510 Disassembly
Step 7
Unscrew to remove the back plate
Carefully pry off back plate
Step 8
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 10
RIM BlackBerry 7510 Disassembly
Step 9
Take off front cover and keypad
Remove one screw in the front.
Step 10
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 7 of 10
RIM BlackBerry 7510 Disassembly
Step 11
Pry the two parts apart.
The screen is now apart from the phone.
Step 12
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 8 of 10
RIM BlackBerry 7510 Disassembly
Step 13
Using the Philips screwdriver unscrew center screw.
The final two parts now come apart.
Step 14
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 9 of 10
RIM BlackBerry 7510 Disassembly
Step 15
The phone is now completely disassembled. Handle back with care shown piece comes right off.
Your blackberry has been fully disassembled.
Step 16
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-08 02:27:30 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 10 of 10
