Rittal. Power and Vision! - BgB Supply

Catalog 33 North American Edition 2012

Rittal. Power and Vision!

Roof/wall mounting Wall mounting Wall bracket

For wall mounting of TS and ES enclosures at the roof, e.g. with heavy components on the door or built-in swing frame.

Packs of

Part No.

4

4595.000

Material: Carbon steel Surface finish: Zinc-plated Possible alternative: With TS 8 inside the enclosure (without mounting panel), baying bracket 8800.470, see page 577

Wall mounting

for CS wall-mounted enclosures For mounting on a wall or panel.

Packs of

Part No.

4

9765.120

Material: Type 304 stainless steel

Pole clamp

for KL, EB, BG, AE, KS and CS wall-mounted enclosures For reliable, convenient fastening to round or square poles. For pole diameter/size: − Ø from 1.6" to 7.5" (40 to 190 mm) −  from 2.0" to 5.9" (50 to 150 mm) Material: − Mounting angles, clamping section: Carbon steel − Clamping strap: Type 304 stainless steel

Packs of

Part No.

1 set

2584.000

Configuration: − 2 mounting angles, 24" (600 mm) long − 4 clamping sections − 2 clamping straps − 4 clamping brackets − 4 screws and captive nuts M8 for mounting on the enclosure

Surface finish: Mounting angle, clamping section: Zinc-plated

Frame connector, adjustable for Comfort Panel Between the command panel and keyboard housing and horizontal or vertical surfaces. Rotation range: Adjustable in 8° stepped increments, see drawing.

Packs of

Part No.

1 set

6005.500

Configuration: Assembly parts and clamping levers for both sides –14°/+178°

Material: Die-cast zinc

12

0°

Color: RAL 7024

Rittal Catalog 33/System accessories

64

32°

47.5

Surface finish: Powder-coated

104°

Metric measurements for are exact, imperial measurements are rounded

631