Screwdrivers, Nut Drivers & Accessories

Screwdrivers, Nut Drivers & Accessories Screwdrivers, Nut Drivers & Accessories

Offering a variety of tip types, hex sizes, shaft lengths, and handle designs, Klein has the screwdrivers and nut drivers professionals demand to get the job done with comfort and ease of use.

Introduction – Screwdrivers, Nut Drivers & Accessories Klein screwdrivers give professionals extra-quality features that have made the Klein name famous for hand tools – features that assure greater convenience, comfort and efficiency in use, plus exceptional strength and durability.

Screwdrivers, Nut Drivers & Accessories

All Klein drivers are made of the highest quality tempered steel, carefully heat-treated for maximum strength. Shafts have integral flanges that provide an extra-strong, torque-proof anchor in the handle. Strong, durable black tips are forged and precision ground with square edges to fit screw openings securely. They resist slippage and provide positive turning action. Cushion-Grip screwdrivers feature super-comfortable, suregrip handles on top-quality blades for the professional. All Klein screwdrivers meet or exceed applicable ANSI and MIL specifications.

Keystone

Cabinet

Phillips

Square Recess

TORX®

Using screwdrivers The size of the screw and the type of opening it has determines which driver to use. But there are a few tips on how to use a driver that can be of benefit, because screwdrivers are the most often misused and abused hand tools of all.

4. Never use a driver at an angle to the screw. Always keep the shank perpendicular to the screw head. Driving at an angle or using a point that is too small can spoil the screw or slip and damage the work.

1. Never use a driver to do another tool’s job. Using a driver as a pry bar, scraper, or a chisel can ruin the tool, spoil the work and cause injury.

5. Never depend on a driver’s handle or covered blade to insulate you from electricity. Plastic and Cushion-Grip handles are intended only to provide a firm, comfortable grip. Insulated blades are intended only as a protective measure against shorting out components. Only use insulated tools that are marked with the official international 1000-volt rating symbol if there is any chance that the tool will make contact with an energized source.

2. Never push a driver beyond its capacity. Make a pilot hole for the screw for easier driving. Use square-shank drivers for heavy work. 3. Never expose a driver to excessive heat. Direct flame can draw the temper from the metal, weakening and possibly warping it, making it unsafe and inefficient to use.

6. Discard damaged or worn drivers. TORX® is a registered trademark of Acument Intellectual Properties, LLC.

Journeyman™ Screwdriver Sets Features: Sleek new tri-lobe handle features an ultra comfortable soft-grip material molded over a solid inner core to create exceptional control, grip, and balance. Hex-shaped welded bolster offers additional strength between the blade and handle.

Precision-machined tip for exact fit into the fastener.

Exceptionally hard steel shaft efficiently transfers every bit of torque generated into the tip.

MADE IN USA

72

Patented Tip-Ident® quickly identifies the type of screwdriver and screwdriver tip orientation.

Meets or exceeds applicable ASME / ANSI specifications.

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Journeyman™ Screwdriver Sets 5-Piece Journeyman™ Screwdriver Set Additional Features: General purpose selection of the most frequently used screwdrivers.

• 

Cat. No. JSDS01

Set Contains

Weight (lbs.) 1.15 Shaft Length

Overall Length

JSD6C06 3/16" cabinet-tip screwdriver JSD4K08 1/4" keystone-tip screwdriver

6" (152 mm)

10-1/4" (260 mm)

4" (102 mm)

9" (228 mm)

JSD6K09 5/16" keystone-tip screwdriver

6" (152 mm)

11" (279 mm)

JSD4PH1 #1 Phillips-tip screwdriver JSD4PH2 #2 Phillips-tip screwdriver

4" (102 mm)

8-1/4" (210 mm)

4" (102 mm)

9" (228 mm)

JSDS01

7-Piece Journeyman™ Screwdriver Set Additional Features: Accommodates a broad range of standard fastener sizes.

• 

Cat. No. Set Contains

Weight (lbs.) 1.65

JSDS02 Cat. No. Description

Shaft Length

Overall Length

JSD4C06 3/16" cabinet-tip screwdriver

4" (102 mm)

8-1/4" (210 mm)

JSD6C06 3/16" cabinet-tip screwdriver

6" (152 mm)

10-1/4" (260 mm)

JSD4K08 1/4" keystone-tip screwdriver

4" (102 mm)

9" (228 mm)

JSD6K09 5/16" keystone-tip screwdriver 6" (152 mm)

11" (279 mm)

JSD4PH1 #1 Phillips-tip screwdriver

4" (102 mm)

8-1/4" (210 mm)

JSD4PH2 #1 Phillips-tip screwdriver JSD6PH3 #2 Phillips-tip screwdriver

4" (102 mm)

9" (228 mm)

6" (152 mm)

11" (279 mm)

Screwdrivers, Nut Drivers & Accessories

Cat. No. Description

JSDS02

Journeyman™ Screwdrivers Journeyman™ Cabinet-Tip Screwdrivers – Round Shaft Additional Features: Narrow cabinet-tip permits blade access where space is limited. Exceptionally hard steel shaft efficiently transfers torque into the tip.

•  • 

Cat. No. JSD4C06 JSD6C06

Shaft Tip Width 3/16" (5 mm) 3/16" (5 mm)

Shaft Length 4" (102 mm) 6" (152 mm)

JSD6C06

Overall Length 8-1/4" (210 mm) 10-1/4" (260 mm)

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

Weight (lbs.) 0.15 0.15

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

73

Journeyman™ Screwdrivers Journeyman™ Phillips-Tip Screwdrivers – Round Shaft Additional Features: Tips are precision machined to provide a consistent symmetry. Provides accurate fit and torque without slippage.

Screwdrivers, Nut Drivers & Accessories

•  • 

Cat. No. JSD4PH1 JSD4PH2 JSD6PH3

Tip Size No. 1 No. 2 No. 3

Shaft Length 4" (102 mm) 4" (102 mm) 6" (152 mm)

Overall Length 8-1/4" (210 mm) 9" (228 mm) 11" (279 mm)

JSD4PH2

Weight (lbs.) 0.15 0.25 0.35

Journeyman™ Keystone-Tip Screwdrivers – Round Shaft Additional Features:

• The most popular flat tip style used in high torque applications. • Hex bolster reinforces blade for hard use and shows for wrench assisted turning.

Cat. No. JSD4K08 JSD6K09

Shaft Tip Width 1/4" (6 mm) 5/16" (8 mm)

Shaft Length 4" (102 mm) 6" (152 mm)

Overall Length 9" (228 mm) 11" (279 mm)

JSD6K09

Weight (lbs.) 0.25 0.35

Cushion-Grip Screwdriver Sets Features: Cushion-Grip handle allows for greater torque and comfort. Integral flanges inside handle provide solid, twist-resistant blade anchor. Special heat-treated shank.

Precision-machined tip for exact fit.

Premium chrome-plated shank for smooth feel and corrosion resistance.

MADE IN USA

74

Patented Tip-Ident® quickly identifies the type of screwdriver and screwdriver tip orientation.

Meets or exceeds applicable ASME / ANSI specifications.

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Cushion-Grip Screwdriver Sets 5-Piece Cushion-Grip Screwdriver Set Additional Features: General-purpose selection of the most frequently used screwdrivers. Includes two cabinet-tip, one Phillips-tip and two keystone-tip screwdrivers.

• • 

Cat. No. Set Contains

Weight (lbs.)

85075

1.30 Cat. No. Description

Blade Length

Overall Length

square-shank, keystone-tip*

4" (102 mm)

8-11/32" (212 mm)

601-6

round-shank, cabinet-tip

6" (152 mm)

9-3/4" (248 mm)

602-6

round-shank, keystone-tip*

6" (152 mm)

10-15/16" (278 mm)

603-4

round-shank, No. 2 Phillips-tip 4" (102 mm) 6" (152 mm) round-shank, cabinet-tip*

605-6

85075

8-5/16" (211 mm) 10-11/32" (263 mm)

* Heavy-duty models

7-Piece Cushion-Grip Screwdriver Set Additional Features: General-purpose selection of the most frequently used screwdrivers. Includes three cabinet-tip, two Phillips-tip and two keystone-tip styles.

•  • 

Cat. No. Set Contains

Weight (lbs.)

85076

1.50 Cat. No. Description

Blade Length

Overall Length

600-4

square-shank, keystone-tip*

4" (102 mm)

8-11/32" (212 mm)

602-6

round-shank, keystone-tip*

6" (152 mm)

10-15/16" (278 mm)

601-3

round-shank, cabinet-tip

3" (76 mm)

6-3/4" (171 mm)

601-6

round-shank, cabinet-tip

6" (152 mm)

9-3/4" (248 mm)

605-4

round-shank, cabinet-tip*

4" (102 mm)

8-11/32" (212 mm)

603-3

round-shank, No. 1 Phillips-tip 3" (76 mm)

6-3/4" (171 mm)

603-4

round-shank, No. 2 Phillips-tip 4" (102 mm)

8-5/16" (211 mm)

Screwdrivers, Nut Drivers & Accessories

600-4

85076

* Heavy-duty models

7-Piece Multiple-Application Screwdriver Set Additional Features: Specialty set for a wide variety of applications. Includes two cabinet-tip, one Phillips-tip, two keystone-tip, one rotary and one screw-holding screwdriver.

•  •

Cat.No.

Set Contains

Weight (lbs.)

85077

1.65 Cat. No. Description

Blade Length

Overall Length

600-4

4" (102 mm)

8-11/32" (212 mm)

square-shank, keystone-tip*

601-6

round-shank, cabinet-tip

6" (152 mm)

9-3/4" (248 mm)

602-6

round-shank, keystone-tip*

6" (152 mm)

10-15/16" (278 mm)

603-4

round-shank, No. 2 Phillips-tip 4" (102 mm)

8-5/16" (211 mm) 10-11/32" (263 mm)

605-6

round-shank, cabinet-tip*

6" (152 mm)

670-6

cabinet-tip rotary screwdriver

6" (152 mm)

9-3/4" (248 mm)

K36

slotted screw-holding screwdriver

6" (152 mm)

9-3/4" (248 mm)

85077

* Heavy-duty model

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

75

Cushion-Grip Screwdriver Sets 7-Piece Multiple-Application Screwdriver & Nut Driver Set Additional Features: Specialty set for a wide variety of applications. Includes one keystone-tip, two cabinet-tip, one Phillips-tip and three nut drivers.

•  •

Cat. No.

Set Contains

Weight (lbs.)

Screwdrivers, Nut Drivers & Accessories

55152

2.00 Cat. No.

Description

Shank Length

Overall Length

600-4

square-shank, keystone-tip*

4" (102 mm)

8-11/32" (212 mm)

601-6

round-shank, cabinet-tip

6" (152 mm)

9-3/4" (248 mm)

603-4

round-shank, No. 2 Phillips-tip

4" (102 mm)

8-5/16" (211 mm)

605-6

round-shank, cabinet-tip*

6" (152 mm)

10-11/32" (263 mm)

630-1/4

1/4" hex nut driver

3" (76 mm)

6-3/4" (171 mm)

630-5/16

5/16" hex nut driver

3" (76 mm)

6-3/4" (171 mm)

630-3/8

3/8" hex nut driver

3" (76 mm)

6-3/4" (171 mm)

55152

* Heavy-duty models

8-Piece Cushion-Grip Screwdriver Set Additional Features: General purpose selection of the most frequently used screwdrivers. Includes one cabinet-tip, three keystone-tip, four Phillips-tip styles.

•  • 

Cat. No.

Set Contains

Weight (lbs.)

85078

1.65 Cat. No.

Description

Shank Length

Overall Length

600-1

round-shank, keystone-tip

1-1/2" (38 mm)

3-7/16" (87 mm)

601-3

round-shank, cabinet-tip

3" (76 mm)

6-3/4" (171 mm)

600-4

square-shank, keystone-tip*

4" (102 mm)

8-11/32" (212 mm)

602-6

round-shank, keystone-tip*

6" (152 mm)

10-15/16" (278 mm)

603-1

round-shank, No. 2 Philips-tip

1-1/2" (38 mm)

3-7/16" (87 mm)

603-3

round-shank, No. 1 Phillips-tip

3" (76 mm)

6-3/4" (171 mm)

603-4

round-shank, No. 2 Phillips-tip

4" (102 mm)

8-5/16" (211 mm)

603-6

round-shank, No. 3 Phillips-tip

6" (152 mm)

11" (279 mm)

85078

* Heavy-duty models

6-Piece Cushion-Grip Screwdriver Set Additional Features: General-purpose selection of the most frequently used screwdrivers. Includes one cabinet-tip, two keystone-tip and three Phillips-tip styles.

• • 

Cat. No.

Set Contains

Weight (lbs.)

85074

1.50 Cat. No.

Description

Blade Length

Overall Length

601-3

round-shank, cabinet-tip

3" (76 mm)

6-3/4" (171 mm)

600-4

square-shank, keystone-tip*

4" (102 mm)

8-11/32" (212 mm)

600-6

square-shank, keystone-tip*

6" (152 mm)

10-15/16" (278 mm)

603-3

round-shank, No. 1 Philips-tip

3" (76 mm)

6-3/4" (171 mm)

603-4

round-shank, No. 2 Philips-tip

4" (102 mm)

8-5/16" (211 mm)

603-6

round-shank, No. 3 Phillips-tip

6" (152 mm)

11" (279 mm)

85074

* Heavy-duty models

76

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Cushion-Grip Screwdriver Sets 4-Piece Cushion-Grip Screwdriver Set Additional Features: The screwdrivers Professionals carry most often. Includes one Phillips-tip, two keystone-tip, one cabinet-tip screwdrivers.

• • 

NEW!

Weight (lbs.)

85105

1.50 Cat. No.

Description

Blade Length

Overall Length

603-4

round-shank, No. 2 Phillips-tip square-shank, keystone-tip*

4" (102 mm)

8-5/16" (211 mm)

4" (102 mm)

8-11/32" (212 mm)

round-shank, cabinet-tip

6" (152 mm)

9-3/4" (248 mm)

square-shank, keystone-tip*

6" (152 mm)

10-15/16" (278 mm)

600-4 601-6 600-6

85105

* Heavy-duty models

2-Piece 10" Long Blade Screwdriver Set Additional Features: Phillips-tip is precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. Precision-ground narrow cabinet-tip permits blade access where space is limited. Ideal for hard-to-reach places where added length is necessary. Includes one Phillips-tip and one cabinet-tip.

•  •  •  •

Cat. No. 85072

85072

Set Contains

Weight (lbs.) .7O

Cat. No.

Description

603-10

round-shank, No. 2 profilated Phillips-tip round-shank, 1/4" (6 mm) cabinet-tip

605-10

Screwdrivers, Nut Drivers & Accessories

Cat. No. Set Contains

Shank Tip Size

Shank Length Overall Length

10" (254 mm)

14-5/16" (363 mm)

10" (254 mm)

14-5/16" (363 mm)

4-Piece Miniature Cushion-Grip Screwdriver Set Additional Feature: Precision tips for exact fit and rigorous applications.

•

Cat. No. Set Contains 85484

Weight (lbs.) .14

Cat. No. Tip Type Size

Shank Tip Size

Shank Length

Overall Length

604-3 606-2 607-3 608-3

No. 0 1/16" (1.6 mm) 3/32" (2.4 mm) 1/8" (3.2 mm)

3" (76 mm) 2" (51 mm) 3" (76 mm) 3" (76 mm)

5-3/4" (146 mm) 4-3/4" (121 mm) 5-3/4" (146 mm) 5-3/4" (146 mm)

Phillips-tip keystone-tip cabinet-tip cabinet-tip

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

85484

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

77

Cushion-Grip Screwdriver Sets 4-Piece Square Recess Cushion-Grip Screwdriver Set Additional Features: Color-coded handle ends with Tip-Ident® for quick and easy identification. Round shank with square-recess tip. Chrome-plated shank for corrosion resistance. Cushion-grip handle for greater torque and comfort. Works on most combination head receptacle, switch and panel screws.

•  • • • •

Screwdrivers, Nut Drivers & Accessories

Cat No.

Set Contains

Weight (lbs.)

85664

1.50 Cat. No.

Point Size

Color Code

Shank Length

Overall Length

660

No. 0

yellow

4" (102 mm)

7-3/4" (197 mm)

661

No. 1

green

4" (102 mm)

7-3/4" (197 mm)

662

No. 2

red

4" (102 mm)

8-5/16" (211 mm)

663

No. 3

black

4" (102 mm)

8-5/16" (211 mm)

5-Piece TORX® Cushion-Grip Screwdriver Set Additional Features: Color-coded handle ends with Tip-Ident® for quick and easy identification. TORX® drive systems transmit more torque to the work and reduce slippage, saving fasteners. Chrome plated shank for corrosion resistance. Cushion-Grip handle for greater torque and comfort.

•  • • •

Cat. No.

Set Contains

Weight (lbs.)

19555

1.20 Cat. No.

TORX® Size

Color Code

Shank Length

Overall Length

19542

T15

yellow

4" (102 mm)

7-3/4" (197 mm)

19543

T20

green

4" (102 mm)

7-3/4" (197 mm)

19544

T25

blue

4" (102 mm)

7-3/4" (197 mm)

19545

T27

brown

4" (102 mm)

8-5/16" (211 mm)

19546

T30

red

4" (102 mm)

8-5/16" (211 mm)

2-Piece Stubby Screwdriver Set

•

85071

Cat. No.

Set Contains

Weight (lbs.) .30

85071 Cat. No.

Description Shank Length

Overall Length

600-1

round-shank, keystone-tip round-shank, Phillips-tip

3-7/16" (87 mm) 3-7/16" (87 mm)

603-1

1-1/2" (38 mm) 1-1/2" (38 mm)

19555

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

Stubby Square-Recess Tip Cushion-Grip Screwdrivers

Additional Feature: Double wings inside handle provide solid, twist-resistant blade anchor.

78

85664

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

Additional Features: Double wings inside handle provide 85155 solid, twist-resistant blade anchor. Works on most combination head receptacle and switch screws. Color-coded handle ends for quick and easy identification.

•  •  • 

Cat. No. Description 668 669

round-shank, No. 1 square-recess tip round-shank, No. 2 square-recess tip

Color Shank Code Length

Overall Length

green 1-1/2" (38 mm)

3-7/16" (87 mm) .15

red

3-7/16" (87 mm) .15

1-1/2" (38 mm)

Stubby Square-Recess Cushion-Grip Screwdriver Set Cat. No. Description Color Shank Code Length 85155 2-piece stubby square- green (Cat. No. 668), 1-1/2" (38 mm) recess cushion-grip red (Cat. No. 669) screwdriver set

Weight (lbs.)

Overall Weight Length (lbs.) 3-7/16" .30 (87 mm)

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Cushion-Grip Screwdrivers Keystone-Tip Screwdrivers – Heavy-Duty Square-Shanks Additional Features: Heavy-duty square shank for wrench-assisted turning. Bolster reinforces shank for hard use. Designed for the most demanding uses.

•  •  • 

600-4

Tip Size

Shank Length

Overall Length

Weight (lbs.)

600-4 600-6 600-8 600-12

1/4" (6 mm) 5/16" (8 mm) 3/8" (10 mm) 1/2" (13 mm)

4" (102 mm) 6" (152 mm) 8" (203 mm) 12" (305 mm)

8-11/32" (212 mm) 10-15/16" (278 mm) 13-7/16" (341 mm) 17-7/16" (443 mm)

.25 .40 .65 .80

Keystone-Tip Screwdrivers – Heavy-Duty Round-Shanks Additional Features: Built to handle the tough jobs with ease. Hex bolster reinforces shank for hard use and allows wrench assisted turning.

•  • 

602-6

Cat. No.

Tip Size

Shank Length

Overall Length

Weight (lbs.)

600-1* 602-3 602-4 602-6 602-8 602-10 602-12

1/4" (6 mm) 7/32" (6 mm) 1/4" (6 mm) 5/16" (8 mm) 3/8" (10 mm) 3/8" (10 mm) 3/8" (10 mm)

1-1/2" (38 mm) 3" (76 mm) 4" (102 mm) 6" (152 mm) 8" (203 mm) 10" (254 mm) 12" (305 mm)

3-7/16" (87 mm) 6-3/4" (171 mm) 8-11/32" (212 mm) 10-15/16" (278 mm) 13-7/16" (341 mm) 15-7/16" (392 mm) 17-7/16" (443 mm)

.10 .15 .25 .35 .55 .60 .65

* Bolster not available on 600-1. Refer to the insulated section for insulated screwdrivers.

Screwdrivers, Nut Drivers & Accessories

Cat. No.

Cabinet-Tip Screwdrivers – Round-Shanks Additional Feature: Narrow cabinet-tip permits blade access where space is limited.

• 

601-6

Cat. No.

Tip Size

601-3 601-4 601-6 601-8 601-10

3/16" (5 mm) 3/16" (5 mm) 3/16" (5 mm) 3/16" (5 mm) 3/16" (5 mm)

Shank Length 3" (76 mm) 4" (102 mm) 6" (152 mm) 8" (203 mm) 10" (254 mm)

Overall Length 6-3/4" (171 mm) 7-3/4" (197 mm) 9-3/4" (248 mm) 11-3/4" (298 mm) 13-3/4" (349 mm)

Weight (lbs.) .10 .15 .15 .20 .20

Cat. No.

Tip Size

Shank Length

Overall Length

Weight (lbs.)

4" (102 mm) 6" (152 mm) 8" (203 mm) 10" (254 mm)

8-11/32" (212 mm) 10-11/32" (263 mm) 12-11/32" (314 mm) 14-11/32" (365 mm)

.25 .30 .30 .35

Heavy-Duty Shanks

605-4 605-6 605-8 605-10

1/4" (6 mm) 1/4" (6 mm) 1/4" (6 mm) 1/4" (6 mm)

Refer to the insulated section for insulated screwdrivers.

Profilated Phillips-Tip Screwdrivers – Round-Shanks Additional Features: Tips are precision-machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. Provides accurate fit and torque without slippage.

•  •

603-7

Cat. No. Tip Size

Shank Length

Overall Length

Weight (lbs.)

603-1 603-3 603-4 603-6 603-7 603-10

1-1/2" (38 mm) 3" (76 mm) 4" (102 mm) 6" (152 mm) 7" (178 mm) 10" (254 mm)

3-7/16" (87 mm) 6-3/4" (171 mm) 8-5/16" (211 mm) 11" (279 mm) 11-5/16" (287 mm) 14-5/16" (364 mm)

.10 .15 .25 .35 .30 .35

No. 2 No. 1 No. 2 No. 3 No. 2 No. 2

Refer to the insulated section for insulated screwdrivers. All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

79

Cushion-Grip Screwdrivers Miniature Cushion-Grip Screwdrivers

Coated Cabinet-Tip Screwdrivers – Round-Shanks

608-6

Additional Feature: Precision tip for exact fit and rigorous applications.

Screwdrivers, Nut Drivers & Accessories

• 

Cat. No.

Tip Type

Tip Size

Shank Length

Overall Length

Weight (lbs.)

No. 0

604-3

Phillips-tip

3" (76 mm)

5-3/4" (146 mm)

.04

606-2

keystone-tip 1/16" (1.6 mm) 2" (51 mm)

4-3/4" (121 mm)

.03

607-2

cabinet-tip

3/32" (2.4 mm) 2" (51 mm)

4-3/4" (121 mm)

.03

607-3

cabinet-tip

3/32" (2.4 mm) 3" (76 mm)

5-3/4" (146 mm)

.04

607-4

cabinet-tip

3/32" (2.4 mm) 4" (102 mm) 6-3/4" (171 mm)

.04

608-2

cabinet-tip

1/8" (3.2 mm)

2" (51 mm)

4-3/4" (121 mm)

.03

608-3

cabinet-tip

1/8" (3.2 mm)

3" (76 mm)

5-3/4" (146 mm)

.04

608-4

cabinet-tip

1/8" (3.2 mm)

4" (102 mm) 6-3/4" (171 mm)

.05

608-6

cabinet-tip

1/8" (3.2 mm)

6" (152 mm) 8-3/4" (222 mm)

.05

608-8

cabinet-tip

1/8" (3.2 mm)

8" (203 mm) 10-3/4" (273 mm) .05

608-10

cabinet-tip

1/8" (3.2 mm)

10" (254 mm) 12-3/4" (324 mm) .05

620-4

Additional Features: Plastic coated for circuit protection only. NOT INSULATED. Special plastic coating resists cutting, cracking and chipping. Thin coating permits use in confined areas.

•  •  • 

Cat. No.

Tip Size

620-3 621-6 621-8 621-10

3/16" (5 mm) 3/16" (5 mm) 3/16" (5 mm) 3/16" (5 mm)

Shank Length 3" (76 mm) 6" (152 mm) 8" (203 mm) 10" (254 mm)

Overall Length 6-3/4" (171 mm) 9-3/4" (248 mm) 11-3/4" (298 mm) 13-3/4" (349 mm)

Weight (lbs.) .15 .20 .20 .25

4" (102 mm) 6" (152 mm) 8" (203 mm)

8-11/32" (212 mm) 10-15/16" (278 mm) 13-7/16" (341 mm)

.20 .40 .60

Heavy-Duty Shanks

620-4 620-6 620-8

1/4" (6 mm) 5/16" (8 mm) 3/8" (10 mm)

TORX® Screwdrivers – Round-Shanks

Square-Recess Tip Screwdrivers – Round-Shanks

19544

660

Additional Features: Color-coded handle ends for quick and easy identification. Round shank with Square-Recess tip. Chrome plated shank for corrosion resistance.

•  •  •

Additional Features: Color-coded handle ends for quick and easy identification. TORX® tip drive cuts slippage, saves fasteners and transmits more torque to the work. Chrome-plated shank for corrosion resistance.

•  •  • 

Cat. No.

Tip Size

Color Code

Shank Length

Overall Length

Weight (lbs.)

Cat. No.

TORX® Size

Color Code

Shank Length

Overall Length

Weight (lbs.)

660 661 662 663 665 666 667

No. 0 No. 1 No. 2 No. 3 No. 1 No. 2 No. 3

yellow green red black green red black

4" (102 mm) 4" (102 mm) 4" (102 mm) 4" (102 mm) 8" (203 mm) 8" (203 mm) 8" (203 mm)

7-3/4" (197 mm) 7-3/4" (197 mm) 8-1/4" (210 mm) 8-1/4" (210 mm) 11-3/4" (298 mm) 12-1/4" (311 mm) 12-1/4" (311 mm)

.20 .20 .30 .30 .30 .40 .40

19542 19543 19544 19545 19546

T15 T20 T25 T27 T30

yellow green blue brown red

4" (102 mm) 4" (102 mm) 4" (102 mm) 4" (102 mm) 4" (102 mm)

8-5/16" (211 mm) 8-5/16" (211 mm) 8-5/16" (211 mm) 8-5/16" (211 mm) 8-5/16" (211 mm)

.20 .25 .25 .25 .25

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

Refer to the insulated section for insulated screwdrivers.

Terminal Block Screwdriver

NEW!

Additional Features: Precision-machined tip provides exact fit for terminal block screws. Tip is up to 19% stronger than competitors. Tip provides 76% higher torque value than the required ASME B107 Standard. Cushion-Grip handle offers greater torque comfort.

• • • •

80

Cat. No.

Shank Top Width

Shank Length

Overall Length

Weight (lbs.)

612-4

1/8" (3.2 mm)

4" (100 mm)

7-3/4" (200 mm)

0.15

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.



M#

612-4

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Cushion-Grip Screwdrivers Conduit-Fitting and Reaming Screwdriver Additional Features: Hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings. Thicker hood is designed for rugged use. Reams and smooths 1/2" (13 mm), 3/4" (19 mm), and 1" (25 mm) thin-wall conduit ends to protect wire and permit correct installation of fittings. Reams both the inside and outside of the conduit at the same time. Longer Cushion-Grip handle provides comfort and more torque for reaming. Replaceable reaming blade is now held in place with a 1/16" set screw.

• 

85191

• 

Cat. No.

Tip Size

Shank Length

85191

5/16" (8 mm)

2-1/2" (64 mm) 7-1/2" (191 mm)

19353

conduit reamer replacement blade kit

Conduit Reamer • Locks onto screwdrivers; reams and smooths thin-wall conduit. • Reams ID and OD at the same time. • Two set-screws for round- and square-shank screwdrivers. Cat. No.

Conduit Capacity

Weight (lbs.)

19352 19353 19351

1/2", 3/4", 1" conduit reamer replacement blade kit for 19352 conduit reamer replacement blade for 19350

.20 .01 .01

Overall Length

Weight (lbs.) .50 .01

19352

• Fits up to 3/8" (10 mm) keystone-tip screwdrivers. • NOT for use on power tools.

Rapi-Driv® Screwdrivers Cabinet-Tip Screwdrivers – Rapi-Driv® Additional Features: Crank-action handle spins screws fast with one hand. Saves time and effort, especially on long-threaded screws in switch plates, light fixtures, etc.

Screwdrivers, Nut Drivers & Accessories

•  •  • 

•  • 

Cat. No. Tip Size

Shank Length Overall Length

Weight (lbs.)

670-3

4" (102 mm)

.15

3/16" (5 mm)

7-3/4" (197 mm)

670-6

3/16" (5 mm)

6" (152 mm)

9-3/4" (248 mm)

.20

671-6

1/4" (6 mm)

6" (152 mm)

9-3/4" (248 mm)

.20

670-6

Phillips Screwdrivers – Rapi-Driv® Additional Features: Crank-action handle spins screws fast with one hand. Saves time and effort, especially on long-threaded screws in switch plates, light fixtures, etc.

•  • 

Cat. No. Tip Size

Shank Length

Overall Length

Weight (lbs.)

681-6

No. 1

6" (152 mm)

9-3/4" (248 mm)

.20

682-6

No. 2

6" (152 mm)

9-3/4" (248 mm)

.25

682-6

Square-Recess Screwdrivers – Rapi-Driv® Additional Features: Crank-action handle spins screws fast with one hand. Color-coded handle ends for quick and easy identification.

•  • 

Cat. No.

Tip Size

Shank Length

Overall Length

Weight (lbs.)

691-6

No. 1

6" (152 mm)

9-3/4" (248 mm)

.35

692-6

No. 2

6" (152 mm)

9-3/4" (248 mm)

.35

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

692-6

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

81

Rapi-Driv® Screwdrivers

Screwdrivers, Nut Drivers & Accessories

Interchangeable Rapi-Driv® The original Klein Cushion-Grip handle • for superior comfort and torque! Interchangeable holder allows quick switching • between tip stylesbitand works with other standard size bits. • Crank-action handle allows you to spin screws fast with one hand. • Blast finish bit provides firm grip on fasteners to reduce cam out. Cat. No.

Contains

Shaft Length

Overall Length

Weight (lbs.)

67100

3/16" slotted, #2 Phillips

6" (152 mm)

9-3/4" (248 mm)

.26

67100

2-in-1 Replacement Bit

Cat. No.

Fits

DescrIption

Quantity

Weight (lbs.)

67101

2-in-1 Rapi-Driv®, 10-in-1, 11-in-1 and 10-Fold™

3/16" slotted, #2 Phillips replacement bit

contains 2 bits

.012

Specialty Screwdrivers Slotted Screw-Holding Screwdrivers Additional Features: Starts and drives screws with one hand when working in hard-to-reach spaces. Cushion-Grip handle provides superior torque and comfort with non-slip grip.

• •

32215

Cat. No.

Screwdriver Type

Shank Length

Overall Length

Weight (lbs.)

32215 32216

1/4" cabinet #2 Phillips

7" (178 mm) 7" (178 mm)

11-1/4" (276 mm) 11-1/4" (276 mm)

0.32 0.32

NEW!

Wire Bending Cabinet-Tip Screwdrivers – Round-Shank Additional Feature: Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches.

• 

Cat. No. Tip Size

Shank Length

Overall Length

605-4B 605-6B

4" (102 mm) 6" (152 mm)

8-11/32" (212 mm) Nos. 10, 12, 14 10-11/32" (263 mm) Nos. 10, 12, 14

1/4" (6 mm) 1/4" (6 mm)

Bends AWG Gauges Finish

605-6B

Weight (lbs.)

chrome-plated 0.25 chrome-plated 0.30

Wire Bending Phillips-Tip Screwdrivers – Round-Shanks Additional Feature: Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches.

• 

Cat. No. Tip Size

Shank Length

Overall Length

603-3B 603-4B

3" (76 mm) 4" (102 mm)

6-3/4" (171 mm) Nos. 12 and 14 8-5/16" (211 mm) Nos. 10, 12, 14

No. 1 No. 2

Bends AWG Gauges

Finish

Weight (lbs.)

603-4B

chrome-plated 0.15 chrome-plated 0.25

Wire Bending Square-Recess Tip Screwdrivers – Round Shanks Additional Feature: Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches.

• 

82

Cat. No.

Tip Size

Shank Length

Overall Length

Bends AWG Gauges

Finish

661B 662B

No. 1 No. 2

4" (102 mm) 4" (102 mm)

8-1/4" (210 mm) 8-1/4" (210 mm)

Nos. 10, 12, 14 Nos. 10, 12, 14

chrome-plated 0.20 chrome-plated 0.30

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

Weight (lbs.)

661B

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Multi-Bit Screwdrivers/Nut Drivers Heavy-Duty Multi-Bit Screwdriver/Nut Driver Heavy-Duty Multi-Bit driver has • Klein’s improved design and construction for greater strength and Cushion-Grip handles for superior torque and comfort. Shaft holds 6 universal tips; converts to 3 nut driver sizes and 1 hex driver Strong, heat-treated nut drivers for improved torque

• •

Shaft Length 2.95" (75 mm)

Overall Length 7.9" (201 mm)

3/16"

1/4"

Weight 0.48

#1

#2

1/4"

5/16"

#1

3/8"

3/8"

#2

NEW!

Ratcheting Multi-Bit Screwdriver/Nut Driver Heavy-Duty Ratcheting Multi-Bit • Klein’s driver provides high-torque capability and comfortable Cushion-Grip handles.

holds 6 universal tips; converts to • Shaft 3 nut driver sizes and 1 hex driver heat-treated nut drivers for • Strong, improved torque ratcheting mechanism for forward, • 3-way reverse and locked positions Cat. No. 32558

Shaft Length 2.95" (75 mm)

Overall Length 8.0" (203 mm)

32558 3/16"

1/4"

Weight 0.71

#1

#2

1/4"

5/16"

#1

3/8"

3/8"

#2

NEW!

Screwdrivers, Nut Drivers & Accessories

Cat. No. 32557

32557

Extended-Reach Multi-Bit Screwdrivers/Nut Drivers Extended-Reach Multi-Bit • Klein’s drivers have extended shafts and blades that provide 39% longer reach, and Cushion-Grip handles for superior torque and comfort. Shaft holds 4 universal tips and converts to 2 nut driver sizes Extra-long shaft provides full reach of 4" standard-blade screwdriver Small diameter shaft for comfortable grip and quick, easy turning

• • •

Cat. No. 32559 32560

Shaft Length 4.11" (104 mm) 4.11" (104 mm)

Overall Length 9.1" (231 mm) 9.1" (231 mm)

32559 Cat No. 32560

1/4"

#2

Weight 0.41 0.41

1/4"

Cat. No. 32559

5/16"

#1

3/16"

#2

1/4"

#1

#2

1/4"

5/16"

NEW!

Stubby Multi-Bit Screwdriver/Nut Driver • Klein’s Stubby Multi-Bit driver allows you to work in tight spaces. • Shaft holds 4 universal tips and converts to 2 nut driver sizes • Compact design features standard 1-1/4" shaft Cat. No. 32561

Shaft Length 1.27" (32 mm)

Overall Length 3.2" (81 mm)

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

Weight 0.16

NEW!

32561 3/16"

1/4"

#1

#2

1/4"

5/16"

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

83

Multi-Bit Screwdrivers/Nut Drivers 5-in-1 Screwdriver/Nut Driver Additional Feature: End of handle is marked to quickly identify tool.

• 

Cat. No. 32476

Contains 5/16" nut driver, #1 and #2 Phillips, 9/32" slotted and 3/16" slotted

32476

Weight (lbs.) .35

Screwdrivers, Nut Drivers & Accessories

10-in-1 Screwdriver/Nut Driver Additional Feature: End of handle is marked to quickly identify tool.

• 

Cat. No. 32477

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

Contains 5/16" and 1/4" nut drivers, #1 and #2 Phillips, 1/4" and 3/16" slotted, T10 and T15 TORX®, #1 and #2 square-recess

32477

Weight (lbs.) .35

11-in-1 Screwdriver/Nut Driver Additional Feature: Integrated screwdriver/nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes. End of handle is marked to quickly identify tool.

•  • 

Cat. No. 32500

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

Contains 3/8", 5/16" and 1/4" nut drivers, #1 and #2 Phillips, 1/4" and 3/16" slotted, T10 and T15 TORX®, #1 and #2 square-recess

32500

Weight (lbs.) .44

11-in-1 Screwdriver/Nut Driver with Schrader® Valve Removal/ Installation Bit Additional Features: Versatile 11-in-1 tool for the professional. Includes unique style bit for installation/removal of common TR-4 Schrader® valves and aggressive thread extractor tip for backing out broken cores. Great for HVAC and other industrial applications. Schrader® is a registered trademark Cushion-Grip handle for superior torque and comfort. of Schrader International, Inc.

32527

• • • •

Cat. No. Contains 32527

Weight (lbs.)

3/8", 5/16" and 1/4" nut drivers, #1 and #2 Phillips, #1 square and #2 square, 1/4" and 3/16" slotted, Schrader® valve core removal/installation – extractor

.44

10-in-1 Folding Screwdriver/Nut Driver • Conveniently folds up for easy storage or to fit into your pocket. driver arm contains four interchangeable • Ebitachstyles and two nut drivers. nfold each driver arm up to a full 180° for straight on • Udriving power, or at 90° for extra leverage on stubborn fasteners. • The quick release button easily unlocks a fully extended driver arm. TORX®

TAMPERPROOF TORX®

32536

84

32537

FRACTIONAL HEX

32538

32535

METRIC HEX

32539

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

Cat. No.

Handle Color

Description

Weight (lbs.)

32535 32536 32537 32538 32539

black green green red blue

5/16" & 1/4" nut drivers, #1 and #2 Phillips, 1/4" & 3/16" slotted, T10 & T15 TORX®, and #1 and #2 square-recess 5/16" & 1/4" nut drivers, T6, T7, T8, T10, T15, T20, T25, T27 TORX® 5/16" & 1/4" nut drivers, T7, T8, T9, T10, T15, T20, T25, T27 TORX® 5/16" & 1/4" nut drivers, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" standard hex 5/16" & 1/4" nut drivers, .9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm metric hex

0.37 0.37 0.37 0.37 0.37

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Replacement Parts Multi-Bit Screwdriver/Nut Drivers Replacement Bits for Screwdriver/Nut Drivers

• Precision-machined tips for exact fit into fastener.

32484

32482

32483

Replacement Bits for Multi-Bit Interchangeable Screwdriver/Nut Drivers (32557, 32558, 32559, 32560, 32561) Fits

Description

Quantity

32392 32394 32395 32396 32397 32398 32399 32400 32401 32410 32411 32412

32557 and 32558 32557 and 32558 32559 and 32560 32561 32557 and 32558 32557, 32558 and 32561 32557 and 32558 32559 32559 32560 32560 32561

Heavy Duty Main Blade Barrel Heavy Duty Secondary Blade Barrel Extended Blade Barrel Stubby Blade Barrel Screwdriver Bit & #2 PH x #1 Square Screwdriver Bit & #1 PH x 1/4 Slotted Screwdriver Bit & #2 Square x 3/16 Slotted Extended Screwdriver Bit & #2 PH x #1 PH Extended Screwdriver Bit & 3/16 Slotted x1/4 Slotted Extended Screwdriver Bit & #2 Square x #2 PH Extended Screwdriver Bit & #1 Square x 1/4 Slotted Screwdriver Bit & #2 PH x 3/16 Slotted

contains 1 unit contains 2 units contains 1 unit contains 1 unit contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits

Replacement Bits for 5-in-1 Interchangeable Screwdriver/Nut Drivers Cat. No.

Fits

Description

Quantity

32478 32479

5-in-1 (Cat. No. 32476) 5-in-1 (Cat. No. 32476)

#1 Phillips – 3/16" slotted #2 Phillips – 9/32" slotted

contains 1 bit contains 1 bit

Screwdrivers, Nut Drivers & Accessories

Cat. No.

Replacement Bits for 10-in-1, 11-in-1 and 10-Fold® Interchangeable Screwdriver/Nut Drivers Cat. No.

Fits

Description

Quantity

32482 32483 32484 67101 32540 32541 32542 32543 32544 32485 32545 32546 32547 32548 32549 32550 32551 32552 32553 32554

10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™ 10-in-1, 11-in-1 and 10-Fold™

#1 Phillips & 3/16" Slotted #2 Phillips & 1/4" Slotted #1 Square & #2 Square #2 Phillips & 3/16" Slotted TT7 & TT8 Tamperproof TORX® TT9 & TT10 Tamperproof TORX® TT15 & TT20 Tamperproof TORX® TT25 & TT27 Tamperproof TORX® #6 TORX® & #7 TORX® #10 TORX® & #15 TORX® #T8 TORX® & #10 TORX® #T25 TORX® & #T27 TORX® 3/32" Hex & 7/64" Hex 5/32" Hex & 3/16" Hex 1/16" Hex & 5/64" Hex 1/8" Hex & 9/64" Hex .9 mm Hex & 1.3 mm Hex 1.5 mm Hex & 2 mm Hex 2.5 mm Hex & 3 mm Hex 4 mm Hex & 5 mm Hex

contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits contains 2 bits

TORX® is a registered trademark of Acument Intellectual Properties, LLC. All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

85

Multi-Bit Screwdrivers/Nut Drivers Non-Ratcheting Magnetic Screwdriver with 32-Piece Tamperproof Bit Set • Cushion-Grip handle for superior torque and comfort. • Sturdy bit and screw holding magnet allows for screws to fit securely in place for easy use. • Includes complete tamperproof bit set in block. Cat. No.

Set Contains

Screwdrivers, Nut Drivers & Accessories

32510

32510

Weight (lbs.) .71

Bits Included

TORX® – T7, T8, T10, T15, T20, T25, T27, T30 and T40 Fraction Hex – 3/32", 7/64", 1/8", 9/64", 5/32", and 3/16" Metric Hex – 2 mm, 2.5 mm, 3 mm, 4 mm, and 5 mm Spanner – 4, 6, 8, and 10 Tri-Wing® – 1, 2, 3 and 4 TORQ-SET® – 6, 8 and 10 1/4" square to 1/4" hex adapter to drive sockets

TORX® is a registered trademark of Acument Intellectual Properties, LLC. TORQ-SET® and Tri-Wing® are registered trademarks of Phillips Screw Co.

Magnetic Screwdriver Bit Sets 32-Piece Standard Tip Bit Set

32-Piece Tamperproof Tip Bit Set • Durable PVC gray

• Durable PVC black

block allows for easy storage of standard bits. Block slides over most screwdriver shafts for easy bit access and storage. Industrial strength, heat-treated steel bits for long lasting use.

• 

32526

• 

block allows for easy storage of tamperproof bits. Block slides over most screwdriver shafts for easy bit access and storage. Industrial strength, heat-treated steel bits for long lasting use.

• 

32525

• 

Cat. No. Set Contains

Weight (lbs.)

Cat. No. Set Contains

Weight (lbs.)

32526

.425

32525

.425

Bits Included

Bits Included

Hex – 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" and 3/16" Phillips – #0, #1, #2 (Qty. 3), and #3 Square Recess – #1, #2, and #3 TORX® – T6, T7, T8, T10, T15, T20 and T25 Slotted – 3-4, 5-6, 6-8, 8-10, 10-12, 12-14 screw sizes Clutch – 5/32" and 3/16" 1/4" square to 1/4" hex adapter to drive sockets

TORX® – T7, T8, T10, T15, T20, T25, T27, T30 and T40 Fraction Hex – 3/32", 7/64", 1/8", 9/64", 5/32", and 3/16" Metric Hex – 2 mm, 2.5 mm, 3 mm, 4 mm, and 5 mm Spanner – 4, 6, 8, and 10 Tri-Wing® – 1, 2, 3 and 4 TORQ-SET ® – 6, 8 and 10 1/4" square to 1/4" hex adapter to drive sockets

TORX® is a registered trademark of Acument Intellectual Properties, LLC. TORQ-SET® and Tri-Wing® are registered trademarks of Phillips Screw Co.

86

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Grip-It® Screwdrivers Features: Handle size and shape provide greater contact area with hand for maximum turning power and a more comfortable grip. Patented, oil-resistant, anti-slip, plastic flock on handle helps prevent slippage.

Special high-alloy steel for exceptionally strong blade and long life.

Grip-It® Keystone-Tip Screwdrivers – Hex-Shanks Additional Feature: Hex-shaped bolster and shaft for wrench-assisted turning

• 

19435

Cat. No.

Tip Size

Shank Length

Overall Length

Weight (lbs.)

19435

7/32" (5.5 mm)

3-15/16" (100 mm)

8-1/16" (205 mm)

.20

19436

5/16" (8 mm)

5-7/8" (150 mm)

10-13/16" (275 mm)

.35

Screwdrivers, Nut Drivers & Accessories

Triangular-shaped handle for more turning power.

Rounded end virtually eliminates pressure points in the palm of the hand.

Grip-It® Keystone-Tip Screwdrivers – Round-Shanks Additional Feature: Hex-shaped bolster for wrench-assisted turning.

• 

Cat. No.

Tip Size

Shank Length

Overall Length

Weight (lbs.)

19427

7/32" (5.5 mm)

3-15/16" (100 mm)

8-1/16" (205 mm)

.15

19428

5/16" (8 mm)

5-7/8" (150 mm)

10-13/16" (275 mm)

.30

19427

Grip-It® Cabinet-Tip Screwdrivers – Round-Shanks Additional Feature: Narrow cabinet-tip permits blade access where space is limited.

• 

Cat. No. 19405

Tip Size 7/32" (5.5 mm)

Shank Length 3-15/16" (100 mm)

Overall Length 7-11/16" (195 mm)

Weight (lbs.) .15

19405

Grip-It® Profilated Phillips-Tip Screwdrivers – Round-Shanks Additional Features: Tips are precision machined to provide a more consistent geometric symmetry than conventional Phillips-tip screwdrivers. Provides accurate fit and torque without slippage.

•  • 

Cat. No. 19445 19446

Tip Size No. 1 No. 2

Shank Length 3-1/8" (80 mm) 3-15/16" (100 mm)

Overall Length 6-7/8" (175 mm) 8-1/16" (205 mm)

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

19446

Weight (lbs.) .10 .15

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

87

Plastic-Handle Screwdriver Set Features: Smooth Comfordome® handles fit the palm of the hand comfortably.

Meets or exceeds applicable ASME / ANSI specifications.

Screwdrivers, Nut Drivers & Accessories

Nickel-chrome, precisionforged and polished blades with black tips.

Tough amber plastic handle.

Chrome-plated shank helps prevent corrosion.

Internal flanges provide solid, twist-resistant shaft anchor.

MADE IN USA

7-Piece Combination Screwdriver Set Additional Features: Set contains two Phillips-tip screwdrivers, two slotted keystone-tip screwdrivers and three popular cabinet-tip screwdrivers.

• 

Cat. No. 85276

Set Contains

Weight (lbs.) 1.10

Cat. No.

Description

Shank Length

BD111

No. 1 Phillips-tip

3" (76 mm)

BD122

No. 2 Phillips-tip

4" (102 mm)

BD284

1/4" square-shank, keystone-tip

4" (102 mm)

BD306

5/16" square-shank, keystone-tip

6" (152 mm)

A216-3

1/8" round-shank, cabinet-tip

3" (76 mm)

A216-4

1/8" round-shank, cabinet-tip

4" (102 mm)

A216-6

1/8" round-shank, cabinet-tip

6" (152 mm)

85276

Pocket-Clip Screwdrivers Additional Features: Round-shank screwdrivers ranging from 3-1/4" (82 mm) to 6-7/16" (164 mm) long. Convenient pocket clip. Cat. No. A010 has keystone-tip, Cat. No. P12 has Phillips-tip, and all others have cabinet-tip.

•  •  • 

Cat. No. Tip Size

Shank Length

Overall Length

Weight(lbs.)

Keystone-Tip and Cabinet-Tip, Pocket-Clip Screwdrivers

A010 A130-2 A130-3 A116-2 A116-3 A116-4 A131-2

88

3/32" (2.4 mm) 1/8" (3.2 mm) 1/8" (3.2 mm) 3/32" ( 2.4 mm) 3/32" ( 2.4 mm) 3/32" ( 2.4 mm) 1/8" ( 3.2 mm)

1-3/8" (35 mm) 2" (51 mm) 3" (76 mm) 2" (51 mm) 3" (76 mm) 4" (102 mm) 2" (51 mm)

3-1/4" (82 mm) 3-7/8" (98 mm) 4-7/8" (124 mm) 4-7/16" (113 mm) 5-7/16" (138 mm) 6-7/16" (164 mm) 4-7/16" (113 mm)

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

A116-4

P12

Cat. No.

Tip Size

Shank Length

Overall Length

Weight(lbs.)

Phillips-Tip, Pocket-Clip Round-Shank Screwdriver

.03 .05 .04 .05 .03 .03 .05

P12

No. 0

2 1/2" (63 mm)

5" (124 mm)

.05

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Plastic-Handle Screwdrivers Midget Screwdriver Additional Features: Specially designed for delicate instrument work. Keystone-tip screwdriver.

•  • 

A000

Cat. No.

Tip Size

Shank Length

Overall Length

Weight (lbs.)

A000

3/32" (2 mm)

1-1/2" (38 mm)

2-7/8" (73 mm)

.02

Additional Features: Oversized handle is 35% larger than comparable screwdriver handles. Delivers up to 50% extra power to perform tough jobs with minimum effort.

•  • 

Cat. No. BD284 BD286 BD306 BD308

Tip Size 1/4" (6.3 mm) 1/4" (6.3 mm) 5/16" (7.9 mm) 5/16" (7.9 mm)

Shank Length 4" (102 mm) 6" (152 mm) 6" (152 mm) 8" (203 mm)

Overall Length 8-1/2" (216 mm) 10-1/2" (267 mm) 11-3/16" (284 mm) 13-3/16" (335 mm)

Weight(lbs.) .25 .30 .35 .40

Cat. No. BD310 BD410 BD412 C718

BD306

Tip Size 5/16" (7.9 mm) 3/8" (9.5 mm) 3/8" (9.5 mm) 3/8" (9.5 mm)

Shank Length 10" (254 mm) 10" (254 mm) 12" (305 mm) 18" (457 mm)

Overall Length 15-3/16" (385 mm) 15-3/16" (385 mm) 17-3/16" (437 mm) 23-5/16" (592 mm)

Weight(lbs.) .50 .60 .75 .95

Keystone-Tip Screwdrivers – Round-Shanks Additional Features: Oversized handle is 35% larger than comparable screwdriver handles. Delivers up to 50% extra power to perform tough jobs with minimum effort.

•  • 

BD156

Cat. No.

Tip Size

Shank Length Overall Length

Weight(lbs.)

Cat. No. Tip Size

Shank Length Overall Length

Weight(lbs.)

BD143 BD144 BD146 BD156

7/32" (5.6 mm) 1/4" (6.3 mm) 1/4" (6.3 mm) 5/16" (7.9 mm)

3" (76 mm) 4" (102 mm) 6" (152 mm) 6" (152 mm)

.20 .25 .25 .35

BD158 BD408 BD510 70155

8" (203 mm) 8" (203 mm) 10" (254 mm) 20" (508 mm)

.40 .50 .55 .45

7-1/2" (190 mm) 8-1/2" (216 mm) 10-1/2" (267 mm) 11-3/16" (284 mm)

5/16" (7.9 mm) 3/8" (9.5 mm) 3/8" (9.5 mm) 1/4" (6.3 mm)

13-3/16" (335 mm) 13-3/16" (335 mm) 15-3/16" (386 mm) 24-1/2" (622 mm)

Screwdrivers, Nut Drivers & Accessories

Keystone-Tip Screwdrivers – Square-Shanks

Cabinet-Tip Screwdrivers – Round-Shanks Additional Features: Small-diameter shank for use in recessed holes or tight places. Well-suited for electrical and telecommunications work.

•  • 

A216-6

Cat. No. Tip Size

Shank Length

Overall Length

Weight(lbs.)

Cat. No.

Tip Size

Shank Length

Overall Length

Weight(lbs.)

A230-2 A216-2 A216-3 A216-4 A216-6 A216-8

2" (51 mm) 2" (51 mm) 3" (76 mm) 4" (102 mm) 6" (152 mm) 8" (203 mm)

5" (127 mm) 5" (127 mm) 6" (152 mm) 7" (178 mm) 9" (228 mm) 11" (279 mm)

.05 .05 .05 .05 .05 .05

A216-10 A316-3 A316-4 A316-6 A316-8 A316-10

1/8" (3.2 mm) 3/16" (4.8 mm) 3/16" (4.8 mm) 3/16" (4.8 mm) 3/16" (4.8 mm) 3/16" (4.8 mm)

10" (254 mm) 3" (76 mm) 4" (102 mm) 6" (152 mm) 8" (203 mm) 10" (254 mm)

13" (330 mm) 6-5/8" (168 mm) 7-5/8" (194 mm) 9-5/8" (244 mm) 11-5/8" (295 mm) 13-5/8" (346 mm)

.05 .10 .10 .10 .15 .20

1/8" (3.2 mm) 1/8" (3.2 mm) 1/8" (3.2 mm) 1/8" (3.2 mm) 1/8" (3.2 mm) 1/8" (3.2 mm)

Profilated Phillips-Tip Screwdrivers – Round-Shanks Additional Features: Oversized handle is 35% larger than comparable screwdriver handles. Delivers up to 50% extra power to perform tough jobs with minimum effort.

•  • 

Cat. No. BD111 BD122 BD133 P18

Tip Size No. 1 No. 2 No. 3 No. 1

Shank Length 3" (76 mm) 4" (102 mm) 6" (152 mm) 8" (203 mm)

Overall Length 6-5/8" (168 mm) 8-1/2" (216 mm) 11-3/16" (284 mm) 11-1/2" (292 mm)

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

Weight(lbs.) .10 .20 .35 .15

BD122

Cat. No.

Tip Size

Shank Length

Overall Length

Weight(lbs.)

P28 P212 P202

No. 2 No. 2 No. 2

8" (203 mm) 12" (305 mm) 20" (508 mm)

11-5/8" (295 mm) 15-5/8" (397 mm) 24-1/2" (622 mm)

.20 .25 .55

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

89

Specialty Plastic-Handle Screwdrivers

Screwdrivers, Nut Drivers & Accessories

Magnetic Screwdriver Set • Each screwdriver has a powerful magnet built into its shank to hold interchangeable bits and also screws. • Comfortable handle for easier driving. • Interchangeable bits store inside handle for quick access. • Wide selection of bits for different screw types.

70035

Cat. No.

Bits Included

Shank Length with Bits

Overall Length

Weight (lbs.)

70035

3/16" and 9/32" slotted and No. 1 and No. 2 Phillips

3-3/4" (95 mm)

7-1/4" (184 mm)

.25

Ratcheting Screwdriver Set • Slotted and Phillips-tip set. • Contains a unique 3-position ratcheting screwdriver plus an assortment of blade types and/or sizes. • Comfortable handle with an easy-to-open snap top. • Interchangeable bits store inside the handle for quick access.

32473

Cat. No.

Bits Included

Shank Length with Bits

Overall Length

Weight (lbs.)

32473

3/16" and 9/32" slotted plus No. 1 and No. 2 Phillips

4-1/4" (108 mm)

8-3/4" (222 mm)

.40

Screwdriver Replacement Bits • These precision-milled bits are 1" in length and are 1/4" hex. • Fits replaceable-bit screwdrivers and other sockets that

4HT15

4H1R2

4HS932

4H1P2

accept 1/4" hex bits.

Cat. No.

Bit Type

Tip Size

Weight (lbs.)

Cat. No.

Bit Type

Tip Size

Weight (lbs.)

4HS316 4HS932 4H1P2 4H1R1 4H1R2 4H1R3 4HT15 4HT20 4HT25

slotted slotted Phillips square-recess square-recess square-recess TORX® TORX® TORX®

3/16" 9/32" No. 2 No. 1 No. 2 No. 3 T15 T20 T25

.02 .02 .02 .01 .01 .01 .02 .01 .02

4HT27 4HT30

TORX® TORX®

T27 T30

.02 .02

Cat. No.

Weight (lbs.)

Bit Sets

Bit Selection

70036 70283 70432

3/16", 9/32" slotted plus No. 1 and No. 2 Phillips tips .05 No. 1, No. 2, No. 3 square-recess tips .05 .05 T15, T20, T25, T27, T30 TORX® tips

TORX® is a registered trademark of Acument Intellectual Properties, LLC.

4-in-1 Screwdriver • Versatile screwdriver with interchangeable, snap-in blades. • Tool supplied with four different tips on two reversible blades. Cat. No.

Description

Overall Length

Weight (lbs.)

32460 32478

screwdriver with two dual-tipped blades #1 Phillips & 3/16" slotted

7-5/8" (194 mm) –

.370 .036

32479

#2 Phillips & 9/32" slotted

–

.044

32460

3-Piece Slotted Screw-Holding Screwdriver Set • Not designed for torquing or tightening. Cat. No. SK234

90

Set Contains

Weight (lbs.) .40

Cat. No.

Shank Size

K23

3/16" x 3" (5 mm x 76 mm)

K34

1/4" x 4" (6.3 mm x 102 mm)

K46

5/16" x 6" (8 mm x 152 mm)

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

SK234

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Specialty Plastic-Handle Screwdrivers Slotted Screw-Holding Screwdrivers • Split-blade screw-holding driver wedges into screw slot. • Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places. • Not designed for torquing or tightening.

K36

Tip Size

Shank Length

Overall Length

Weight (lbs.)

Cat. No.

Tip Size

Shank Length

Overall Length

Weight (lbs.)

K21† K23 K28 K34‡ K36‡

1/16" (1.6 mm) 3/16" (5 mm) 3/16" (5 mm) 1/4" (6.3 mm) 1/4" (6.3 mm)

3" (76 mm) 3" (76 mm) 8" (203 mm) 4" (102 mm) 6" (152 mm)

5-1/4" (133 mm) 5-1/4" (133 mm) 10-1/4" (260 mm) 7-3/4" (197 mm) 9-3/4" (247 mm)

.05 .05 .10 .10 .15

K38‡ K44 K46 K48

1/4" (6.3 mm) 5/16" (8 mm) 5/16" (8 mm) 5/16" (8 mm)

8" (203 mm) 4" (102 mm) 6" (152 mm) 8" (203 mm)

11-3/4" (298 mm) 8-1/4" (209 mm) 10-1/4" (260 mm) 12-1/4" ( 311 mm)

.20 .25 .25 .30

† Precision blade for use with small precision screws. Blade thickness of .028" expanding to .045". ‡ Blade thickness of .043" expanding to .085". Note: K21 and K23 have pocket clips.

Screw-Holding Screwdrivers

Phillips-Tip Screw-Holding Screwdrivers • Blade separates to hold the fastener. • Not designed for torquing or tightening. • Positive gripping action holds and starts Phillips

K16

screws in awkward, hard-to-reach places.

Cat. No. K14 K16 K19

Overall Length 5" (127 mm) with pocket clip 7" (178 mm) 9" (229 mm)

Weight (lbs.) .05 .05 .05

Screwdrivers, Nut Drivers & Accessories

Cat. No.

Offset Screwdrivers

Slotted-Tip Offset Screwdrivers • Designed for confined hard-to-reach applications. • Two tip sizes for added convenience. Cat. No. V01 V02 V03 V04

For Screw Nos. 2 to 6 6 to 10 8 to 12 12 to 16

Overall Length 3" (76 mm) 4-1/4" (108 mm) 5" (127 mm) 6" (152 mm)

Tip Width 3/16" (5 mm) 1/4" (6.3 mm) 5/16" (8 mm) 3/8" (9.5 mm)

Weight (lbs.) .01 .05 .11 .25

V01

Phillips-Tip Offset Screwdrivers • Designed for confined hard-to-reach applications. • Two tip sizes for added convenience. Cat. No. P120 P340

Point Nos. No. 1 and No. 2 No. 3 and No. 4

Overall Length 4-3/4" (121 mm) 6" (152 mm)

Weight (lbs.) .05 .20

P120

Combination-Tip Offset Screwdriver • Designed for confined hard-to-reach applications. • Two tip sizes for added convenience. Cat. No.

For Screw Nos. Overall Length

Tip Width

V05

1/4" slotted No. 2 Phillips

1/4" (6.3 mm) .05

5" (127 mm)

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

V05

Weight (lbs.)

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

91

Offset Screwdrivers 2-Piece Offset Screwdriver Set • Designed for confined hard-to-reach applications. • Two tip sizes for added convenience. Cat. No.

Set Contains

Weight (lbs.)

210122

P120 (No. 1 and No. 2 Phillips-tip) and V02 (1/4" to 5/16" slotted tip)

.10

210122

Screwdrivers, Nut Drivers & Accessories

Specialty Driver Set Reversible Impact-Driver Set • Rugged, hand-impact driver turns rusted, frozen, or other stubborn screws. • Can also be used with 3/8" square-drive impact sockets. • Internal, spring-loaded, helical design transforms the impact of a hammer blow to up to 200 ft.-lbs. of shock torque. • Easily reverses for tightening or loosening screws. • Constructed of high-grade alloy steel that has been heat-treated for added strength. • Reclosable, seal-tight vinyl pouch with hang-up grommet.

70220

Cat. No. Description

Weight (lbs.)

70220

2.15

pouched impact-driver set with 3/8"-square-drive fitting adapter for 5/16" hex bits,4 assorted hex screwdriver bits (5/16" and 1/2" regular slotted tip, No. 2 and No. 4 Phillips-tip)

Replacement Screwdriver Bits

70229

replacement set of 5/16"-drive screwdriver bits (5/16" and 1/2" regular slotted tip, No. 2 and No. 4 Phillips-tip) packed in reclosable, seal-tight vinyl pouch  .25

Torque Screwdrivers Torque-Screwdriver Set • Compact, easy to use set. • Form-fitted storage box to keep set organized. Cat. No.

Contains

Weight (lbs.)

57034

torque screwdriver Cat. No. 57035, 8-piece bit set Cat. No. 57036, rugged form-fitted storage box

1.0

57034

Torque Screwdriver • Adjustable, torque-limiting screwdriver with calibrated micrometer scale. • Torqued to micrometer accuracy. Accurate to ±6° plus 1/2 graduation. • Graduated in 2 in.-lbs. (.2 NM) increments. • Torques either clockwise or counter-clockwise. • Can be preset and sealed for production use. • Meets MIL-H26497 specifications. • Easy-release bit holder. Bits are held securely during operation, yet are easily removed when released. luminum outside construction for light weight • Aand non-magnetic characteristics. Cat. No. Range Drive Size Overall Length • Non-slip grip. 57035 2-36 in.-lb. 1/4" female 8" (203 mm) • Bits not included.

57035

Weight (lbs.) .50

8-Piece Torque-Screwdriver Bits Set • Set of eight bits for Cat. No. 57035 torque screwdriver.

92

Cat. No.

Contains

Weight (lbs.)

57036

Phillips No. 1 and No. 2; slotted No. 4 (3/16" x .034"), No. 5 (7/32" x .036"), No. 6 (1/4" x .038"), No. 10 (5/16" x .046"), No. 12 (3/8" x .050"); 1/4" hex-to-square male adapter

.50

57036

All dimensions are in inches and (millimeters). All dimensions are in inches and (millimeters). WARNING: Always wear approved eye protection.

WARNING: Never Alwaysuse wear eyeelectrical protection. onapproved or near live circuits.

WARNING: NOT insulated. Will NOT protect against electrical shock. WARNING: Do NOT use to pry or chisel.

Cushion-Grip Nut Driver Sets Features: Internal flanges provide solid, twist-resistant shaft anchor.

Cushion-Grip handle allows for greater torque and comfort. Premium chrome-plated shaft for smooth feel and corrosion resistance. Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications.

Meets or exceeds applicable ASME / ANSI specifications.

Handle end is also color coded for easy identification.

MADE IN USA

7-Piece Cushion-Grip Nut Driver Set — 3" Shafts • Set contains 630-3/16, 630-1/4, 630-5/16, 630-11/32, 630-3/8, 630-7/16, and 630-1/2. (See individual tool listings for more details.)

Cat. No.

Weight (lbs.)

631

1.50

Screwdrivers, Nut Drivers & Accessories

Patented Tip-Ident® quickly identifies nut driver and size.

7-Piece Hollow-Shaft* Magnetic Tip Cushion-Grip Nut Driver Set — 3" Shafts • Full hollow shaft for long bolts or studs, with magnetic tip. • Set contains 630-3/16M, 630-1/4M, 630-5/16M, 630-11/32M, 630-3/8M, 630-7/16M, and 630-1/2M. (See individual tool listings for more details.)

Cat. No.

Weight (lbs.)

631M

1.50 631M

*3/16" magnetic nut driver does not have hollow shaft

7-Piece Cushion-Grip Nut Driver Set — 6" Shafts • Set contains 646-3/16, 646-1/4, 646-5/16, 646-11/32, 646-3/8, 646-7/16, and 646-1/2. (See individual tool listings for more details.)

Cat. No.

Weight (lbs.)

647

1.55

7-Piece Hollow-Shaft* Magnetic Tip Cushion-Grip Nut Driver Set — 6" Shafts • Full hollow shaft for long bolts or studs, with magnetic tip. • Set contains 646-3/16M, 646-1/4M, 646-5/16M, 646-11/32M, 646-3/8M, 646-7/16M, 646-1/2M. (See individual tool listings for more details.)

Cat. No.

Weight (lbs.)

647M

1.55

*3/16" magnetic nut driver does not have hollow shaft

647M

93

All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.

Cushion-Grip Nut Driver Sets 4-Piece Cushion-Grip Nut Driver Set Additional Features: Set contains: 630-1/4, 630-5/16, 630-3/8, 630-9/16. (See individual tool listings for more details.)

NEW!

• 

Cat. No.

Set Contains

Weight (lbs.)

633

1.30

Screwdrivers, Nut Drivers & Accessories

Cat. No.

Color Code

Hex Size Shaft Metric Length

Overall Length

630-1/4

red

1/4"

3" (76 mm)

6-3/4" (171 mm)

630-5/16

yellow

5/16"

3" (76 mm)

6-3/4" (171 mm)

630-3/8

blue

3/8"

630-9/16

orange 9/16"

3" (76 mm)

6-3/4" (171 mm)

4" (102 mm)

9-3/8" (238 mm)

633

2-Piece Hollow-Shaft Magnetic Tip Cushion-Grip Stubby Nut Driver Set — 1-1/2" Shafts

2-Piece Cushion-Grip Stubby Nut Driver Set — 1-1/2" Shafts

•  • 

Additional Features: Full hollow shaft for long bolts or studs, with magnetic tip. Stubby nut drivers allow for work in close quarters. Set contains: 610-1/4M, 610-5/16M. (See individual tool listings for more details).

•  •  • 

610

Stubby nut drivers allow for work in close quarters. Set contains: 610-1/4, 610-5/16. (See individual tool listings for more details.)

Cat. No.

Weight (lbs.)

Cat. No.

Weight (lbs.)

610

.20

610M

.20

2-Piece Magnetic Tip Cushion-Grip Nut Driver Sets Additional Features: General purpose selection of the most frequently used nut drivers. (See individual tool listings for more details).

• 

Cat. No.

Set Contains

Weight (lbs.)

630M 646M

630-1/4M, 630-5/16M 646-1/4M, 646-5/16M

.40 .50

630M

7-Piece Metric Cushion-Grip Nut Driver Set — 3" Shafts Additional Features: Standard length for most applications. Fits over long bolts and studs.

•  • 

Cat. No.

Set Contains

Weight (lbs.)

65160

1.50 Cat. No.

Color Code

Hex Size Shaft Metric Length

Overall Length

630-5mm

black

5 mm

6-3/4" (171 mm)

3" (76 mm)

630-5.5mm brown

5.5 mm

3" (76 mm)

6-3/4" (171 mm)

630-6mm

6 mm

3" (76 mm)

6-3/4" (171 mm)

630-7mm

orange 7 mm

3" (76 mm)

6-3/4" (171 mm)

630-8mm

yellow

8 mm

3" (76 mm)

6-3/4" (171 mm)

red

630-9mm

green

9 mm

3" (76 mm)

6-3/4" (171 mm)

630-10mm

blue

10 mm

3" (76 mm)

6-3/4" (171 mm) 65160

94 All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.

Cushion-Grip Nut Drivers Cushion-Grip Stubby Nut Drivers — 1-1/2" Shafts Additional Features: Full hollow shaft for long bolts or studs. Stubby nut drivers allow for work in close quarters. Meets or exceeds applicable ASME / ANSI specifications.

•  •  • 

610-5/16

Cat. No.

Color Code

Hex Size

Shaft Length

Overall Length

Weight (lbs.)

610-1/4 610-5/16

red yellow

1/4" 5/16"

1-1/2" (38 mm) 1-1/2" (38 mm)

3-1/2" (89 mm) 3-1/2" (89 mm)

.10 .10

Additional Features: Standard length for most applications. Fits over long bolts and studs.

Metric Cushion-Grip Hollow-Shaft Nut Drivers — 3" Shafts

630-1/2

•  • 

Cat. No. 630-3/16 630-1/4 630-5/16 630-11/32 630-3/8 630-7/16 630-1/2 630-9/16 630-5/8

Color Code black red yellow green blue brown red orange yellow

Hex Size 3/16" 1/4" 5/16" 11/32" 3/8" 7/16" 1/2" 9/16" 5/8"

Shaft Length 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 4" (102 mm) 4" (102 mm)

Additional Features: Standard length for most applications. Fits over long bolts and studs.

630-11mm

•  • 

Overall Length

Weight (lbs.) 6-3/4" (171 mm) .20 6-3/4" (171 mm) .20 6-3/4" (171 mm) .20 6-3/4" (171 mm) .20 6-3/4" (171 mm) .20 7-5/16" (186 mm) .25 7-5/16" (186 mm) .25 9-3/8" (238 mm) .35 9-3/8" (238 mm) .35

Cat. No.

Color Code

Hex Size Metric

Shaft Length

Overall Length

Weight (lbs.)

630-4mm

red

4 mm

3" (76 mm)

6-3/4" (171 mm)

.20

630-4.5mm

yellow

4.5 mm

3" (76 mm)

6-3/4" (171 mm)

.20

630-5mm

black

5 mm

3" (76 mm)

6-3/4" (171 mm)

.20

630-6mm

red

6 mm

3" (76 mm)

6-3/4" (171 mm)

.20

630-7mm

orange

7 mm

3" (76 mm)

6-3/4" (171 mm)

.20

630-8mm

yellow

8 mm

3" (76 mm)

6-3/4" (171 mm)

.20

630-10mm

blue

10 mm

3" (76 mm)

6-3/4" (171 mm)

.20

630-11mm

brown

11 mm

3" (76 mm)

7-5/16" (186 mm)  .20

Screwdrivers, Nut Drivers & Accessories

Cushion-Grip Hollow-Shaft Nut Drivers — 3" Shafts

Refer to the insulated section for insulated nut drivers.

Cushion-Grip Hollow-Shaft Nut Drivers — 6" Shafts Additional Features: Reaches into deep recesses. Fits over extra-long bolts and studs.

•  • 

646-1/2

Cat. No.

Color Code

Hex Size

Shaft Length

Overall Length

Weight (lbs.)

Cat. No.

Color Code

Hex Size

Shaft Length

Overall Length

Weight (lbs.)

646-3/16 646-1/4 646-5/16 646-11/32 646-3/8

black red yellow green blue

3/16" 1/4" 5/16" 11/32" 3/8"

6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm)

9-3/4" (248 mm) 9-3/4" (248 mm) 9-3/4" (248 mm) 9-3/4" (248 mm) 9-3/4" (248 mm)

.25 .25 .25 .25 .30

646-7/16 646-1/2 646-9/16 646-5/8

brown red orange yellow

7/16" 1/2" 9/16" 5/8"

6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm)

10-5/16" (262 mm) 10-5/16" (262 mm) 11-3/8" (289 mm) 11-3/8" (289 mm)

.35 .35 .40 .40

95 All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.

Cushion-Grip Nut Drivers Magnetic Tip Nut Drivers – Hollow Shafts* Additional Feature: Exclusive hollow shaft* design with Rare Earth magnetic tip features unobstructed pass-through, even on long bolts.

• 

Screwdrivers, Nut Drivers & Accessories

Cat. No.

Color Code 610-1/4M 1/4" 610-5/16M 5/16" 610-3/8M 3/8" 630-3/16M* 3/16" 630-1/4M 1/4" 630-5/16M 5/16" 630-11/32M 11/32" 630-3/8M 3/8" 630-7/16M 7/16" 630-1/2M 1/2"

Hex Size red yellow blue black red yellow green blue brown red

Shaft Length 1-1/2" (38 mm) 1-1/2" (38 mm) 1-1/2" (38 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm)

Overall Length 1-1/2" (89 mm) 1-1/2" (89 mm) 1-1/2" (89 mm) 6-3/4" (171 mm) 6-3/4" (171 mm) 6-3/4" (171 mm) 6-3/4" (171 mm) 6-3/4" (171 mm) 7-5/16" (186 mm) 7-5/16" (186 mm)

Weight (lbs.) .10 .10 .10 .20 .20 .20 .20 .20 .25 .25

Drive-A-Matic Cushion-Grip Nut Driver

630-3/8M

Cat. No.

Color Code 646-3/16M* 3/16" 646-1/4M 1/4" 646-5/16M 5/16" 646-11/32M 11/32" 646-3/8M 3/8" 646-7/16M 7/16" 646-1/2M 1/2" 618-1/4M 1/4" 618-5/16M 5/16"

Hex Size black red yellow green blue brown red red yellow

Shaft Length 6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm) 18" (457 mm) 18" (457 mm)

Overall Length 9-3/4" (248 mm) 9-3/4" (248 mm) 9-3/4" (248 mm) 9-3/4" (248 mm) 9-3/4" (248mm) 10-5/16" (262 mm) 10-5/16" (262 mm) 21-3/4" (552 mm) 21-3/4" (552 mm)

*3/16" magnetic nut driver does not have a hollow shaft.

Coated Hollow-Shaft Nut Drivers

632

Additional Features: Automatically fits 15 different nut and screw sizes. Hex head adjusts to the proper size as you turn it. Will drive or loosen hex nuts from 1/4" (6.4 mm) to 7/16" (11.1 mm), hex-head screws from No. 6 to 1/4" (6.4 mm), and socket-head cap screws from No. 8 to 5/16" (7.9 mm).

•  •  • 

Cat. No.

Overall Length

Weight (lbs.)

632

7" (178 mm) when open, 6-3/4" (171 mm) when closed .35

Weight (lbs.) .25 .25 .25 .25 .30 .35 .35 .50 .50

640-1/2

Additional Features: Entire shaft plastic coated for circuit protection only. NOT INSULATED. Special plastic coating resists cutting, cracking and chipping. Thin coating permits use in confined areas.

•  •  • 

Cat. No. 640-3/16 640-1/4 640-5/16 640-3/8 640-7/16 640-1/2 640-9/16 640-5/8

Color Code black red yellow blue brown red orange yellow

Hex Size 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8"

Shaft Length Overall Length 3" (76 mm) 6-3/4" (171 mm) 3" (76 mm) 6-3/4" (171 mm) 3" (76 mm) 6-3/4" (171 mm) 3" (76 mm) 6-3/4" (171 mm) 3" (76 mm) 7-5/16" (186 mm) 3" (76 mm) 7-5/16" (186 mm) 4" (102 mm) 9-3/8" (238 mm) 4" (102 mm) 9-3/8" (238 mm)

Weight (lbs.) .25 .25 .25 .25 .30 .25 .40 .40

WARNING: NOT insulated. Coating is intended for protection of circuits only.

96 All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.

Plastic-Handle, Hollow-Shaft Nut Driver Sets Features: Smooth Comfordome® handles fit the palm of the hand comfortably.

Meets or exceeds applicable ASME / ANSI specifications.

Chrome-plated shaft helps prevent corrosion.

Internal flanges provide solid, twist-resistant shaft anchor. Hollow shafts facilitate work on stacked circuit boards or other long bolt applications.

MADE IN USA

4-Piece Nut Driver Set — 3" Shafts Additional Feature: Standard length works for most applications.

• 

Cat. No. Set Contains 70084

Screwdrivers, Nut Drivers & Accessories

Handles are color-coded for easy identification.

Weight (lbs.) .60

Cat. No.

Handle Hex Color Size

Shaft Length

Overall Length

S8 S10 S11 S12

red amber green blue

3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm)

6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm)

1/4" 5/16" 11/32" 3/8"

70084

5-Piece Nut Driver Set — 3" Shafts Additional Features: Standard length works for most applications. Comes in a hang-up box.

•  • 

Cat. No. 89969

Set Contains

Weight (lbs.) .70

Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

S6 S8 S10 S11 S12

black red amber green blue

3/16" 1/4" 5/16" 11/32" 3/8"

3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm)

6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm)

89969

97 All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.

Plastic-Handle, Hollow Shaft Nut Driver Sets 7-Piece Nut Driver Set — 3" Shafts Additional Feature: Set contains seven hollow-shaft nut drivers in the most popular hex sizes.

• 

Cat. No.

Set Contains

Weight (lbs.)

Screwdrivers, Nut Drivers & Accessories

89004

1.10 Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

S6

black

3/16"

3" (76 mm)

6-5/8" (168 mm)

S8

red

1/4"

3" (76 mm)

6-5/8" (168 mm)

S10

amber

5/16"

3" (76 mm)

6-5/8" (168 mm)

S11

green

11/32"

3" (76 mm)

6-5/8" (168 mm)

S12

blue

3/8"

3" (76 mm)

6-5/8" (168 mm)

S14

brown

7/16"

3" (76 mm)

7" (178 mm)

S16

red

1/2"

3" (76 mm)

7" (178 mm)

89004

7-Piece Nut Driver Set — 3" Shafts Additional Features: Set contains seven hollow-shaft nut drivers in the most popular hex sizes. Convenient vinyl pouch hangs up or rolls up.

•  • 

Cat. No.

Set Contains

Weight (lbs.)

K7

1.15 Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

S6

black

3/16"

3" (76 mm) 6-5/8" (168 mm)

S8

red

1/4"

3" (76 mm) 6-5/8" (168 mm)

S10

amber

5/16"

3" (76 mm) 6-5/8" (168 mm)

S11

green

11/32"

3" (76 mm) 6-5/8" (168 mm)

S12

blue

3/8"

3" (76 mm) 6-5/8" (168 mm)

S14

brown

7/16"

3" (76 mm) 7" (178 mm)

S16

red

1/2"

3" (76 mm) 7" (178 mm)

K7

7-Piece Nut Driver Set With Metal Stand — 3" Shafts Additional Features: Set contains seven hollow-shaft nut drivers in the most popular hex sizes. Metal holder stands freely or hangs on wall.

•  • 

Cat. No.

Set Contains

Weight (lbs.)

S700

1.60 Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

S6

black

3/16"

3" (76 mm) 6-5/8" (168 mm)

S8

red

1/4"

3" (76 mm) 6-5/8" (168 mm)

S10

amber

5/16"

3" (76 mm) 6-5/8" (168 mm)

S11

green

11/32"

3" (76 mm) 6-5/8" (168 mm)

S12

blue

3/8"

3" (76 mm) 6-5/8" (168 mm)

S14

brown

7/16"

3" (76 mm) 7" (178 mm)

S16

red

1/2"

3" (76 mm) 7" (178 mm)

S700

98 All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.

Plastic-Handle, Hollow Shaft Nut Driver Sets 10-Piece Metric Nut Driver Set With Stand — 3" Shafts Additional Features: White enameled metal stand holds all ten 3"-shaft metric nut drivers. Identification label makes individual size selection easy.

•  • 

Cat.No.

Set Contains

Weight (lbs.)

70200

1.85 Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

black

4 mm

3" (76 mm)

6-5/8" (168 mm)

black

4.5 mm

3" (76 mm)

6-5/8" (168 mm)

70205

black

5 mm

3" (76 mm)

6-5/8" (168 mm)

70255

black

5.5 mm

3" (76 mm)

6-5/8" (168 mm)

70206

black

6 mm

3" (76 mm)

6-5/8" (168 mm)

70207

black

7 mm

3" (76 mm)

6-5/8" (168 mm) 6-5/8" (168 mm)

70208

black

8 mm

3" (76 mm)

70209

black

9 mm

3" (76 mm)

6-5/8" (168 mm)

70210

black

10 mm

3" (76 mm)

7" (178 mm)

70211

black

11 mm

3" (76 mm)

7" (178 mm)

70200

7-Piece Nut-Driver Set — 6" Shafts Additional Feature: Contains seven 6"-shaft nut drivers that reach into deep recesses.

• 

Cat. No.

Set Contains

Screwdrivers, Nut Drivers & Accessories

70204 70245

Weight (lbs.)

89904

1.15 Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

S66

black

3/16"

6" (152 mm)

9-5/8" (244 mm)

S86

red

1/4"

6" (152 mm)

9-5/8" (244 mm)

S106

amber

5/16"

6" (152 mm)

9-5/8" (244 mm)

S116

green

11/32"

6" (152 mm)

9-5/8" (244 mm)

S126

blue

3/8"

6" (152 mm)

9-5/8" (244 mm)

S146

brown

7/16"

6" (152 mm)

10" (254 mm)

S166

red

1/2"

6" (152 mm)

10" (254 mm) 89904

Plastic-Handle, Hollow Shaft Nut Drivers Stubby Nut Drivers — 1-1/2" Shafts Additional Feature: Stubby nut drivers allow for work in close quarters.

• 

SS10

Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

Weight (lbs.)

SS8 SS10 SS12

red amber blue

1/4" 5/16" 3/8"

1-1/2" (38 mm) 3-3/4" (95 mm) .15 1-1/2" (38 mm) 3-3/4" (95 mm) .15 1-1/2" (38 mm) 3-3/4" (95 mm) .15

99 All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.

Plastic-Handle Nut Drivers Hollow-Shaft Nut Drivers — 3" & 4" Shafts Additional Features: Standard length works for most applications. Fits over long bolts and studs.

Screwdrivers, Nut Drivers & Accessories

•  • 

Metric Nut Drivers — 3" Shafts

S10

Additional Features: Standard length works for most applications. Fits over long bolts and studs.

70209

•  • 

Cat. No.

Handle Color

Hex Size

Shaft Length Overall Length

Weight (lbs.)

Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

Weight (lbs.)

S5 S6 S7 S8 S9 S10 S11 S12 S14 S16 S18 S20

amber black brown red orange amber green blue brown red red red

5/32" 3/16" 7/32" 1/4" 9/32" 5/16" 11/32" 3/8" 7/16" 1/2" 9/16" 5/8"

3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 4" (102 mm) 4" (102 mm)

.10 .10 .10 .15 .15 .15 .15 .15 .20 .20 .30 .30

70204 70245 70205 70255 70206 70207 70208 70209 70210 70211

black black black black black black black black black black

4 mm 4.5 mm 5 mm 5.5 mm 6 mm 7 mm 8 mm 9 mm 10 mm 11 mm

3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm) 3" (76 mm)

6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 7" (178 mm) 7" (178 mm)

.10 .10 .15 .15 .15 .15 .15 .15 .15 .20

6-1/2" (165 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 6-5/8" (168 mm) 7" (178 mm) 7" (178 mm) 8-1/2" (216 mm) 8-1/2" (216 mm)

Nut Drivers — 6" Shafts

Magnetic Nut Drivers — Solid Shafts

S86

S106M

Additional Features: Reaches into deep recesses. Fits over extra-long bolts and studs.

•  • 

Additional Feature: Powerful nut-holding magnet built into solid shaft.

• 

Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length Weight (lbs.)

Cat. No.

Handle Color

Hex Size

Shaft Length

Overall Length

Weight (lbs.)

S66 S86 S106 S116 S126 S146

black red amber green blue brown

3/16" 1/4" 5/16" 11/32" 3/8" 7/16"

6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm)

9-5/8" (244 mm) 9-5/8" (244 mm) 9-5/8" (244 mm) 9-5/8" (244 mm) 9-5/8" (244 mm) 10" (254 mm)

S8M S10M S86M S106M S126M S818M S1018M

red amber red amber blue red amber

1/4" 5/16" 1/4" 5/16" 3/8" 1/4" 5/16"

3" (76 mm) 3" (76 mm) 6" (152 mm) 6" (152 mm) 6" (152 mm) 18" (457 mm) 18" (457 mm)

6-5/8" (168 mm) 6-5/8" (168 mm) 9-5/8" (244 mm) 9-5/8" (244 mm) 9-5/8" (244 mm) 21-5/8" (549 mm) 21-5/8" (549 mm)

.15 .15 .15 .15 .15 .25 .25

.15 .15 .15 .15 .15 .20

Super-Long Nut Drivers — 18" Shafts Additional Features: Heavy-duty, long-reach nut drivers. Ideal for reaching into walls and other hard-to-reach places where added length is necessary. Available in magnetic and non-magnetic tip.

•  •  • 

S1018

Cat. No. S818 S818M S1018 S1018M

Handle Color red red amber amber

Hex Size 1/4" (6.3 mm) 1/4" (6.3 mm) 5/16" (7.9 mm) 5/16" (7.9 mm)

Shaft Length 18" (457 mm) 18" (457 mm) 18" (457 mm) 18" (457 mm)

Type standard magnetic standard magnetic

Overall Length 21-5/8" (549 mm) 21-5/8" (549 mm) 21-5/8" (549 mm) 21-5/8" (549 mm)

Weight (lbs.) .25 .25 .25 .25

100 All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.

Tapping Tools and Awls Cushion-Grip Triple Taps and Six-in-One Tap Tool • Quickly forms new threads, re-forms burred threads, and cleans out plaster obstructions. • Each tap size rethreads to next larger size if threads are stripped.

Tap Sizes Triple Tap 10-24, 12-24, 1/4-20 Triple Tap 6-32, 8-32, 10-24 Triple Tap 6-32, 8-32, 10-32 6-in-1 Tap 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20

Overall Length 7-3/4" 7-3/4" 7-3/4" 7-3/4"

Weight (lbs.) .25 .25 .25 .25

Six-in-One Tapping Tool

Replacement Taps

628-20 626-24 626-32

10-24, 12-24, 1/4-20 6-32, 8-32, 10-24 6-32, 8-32, 10-32

replacement for 623-20, 626 replacement for 623-24 replacement for 623-32, 626

Triple Taps

627-20

• Quickly forms new threads, re-forms burred threads, and cleans out plaster obstructions. • Each tap size rethreads to next larger size if threads are stripped. • Two high-carbon steel taps are secured in reversible holder.

Cat. No.

Tap Sizes

Overall Length

Weight (lbs.)

627-20

6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20

7-5/8" (194 mm)

0.35

625-24

• Quickly forms new threads, re-forms burred threads, and cleans out plaster obstructions. • Each tap size rethreads to next larger size if threads are stripped.

Cat. No. Tap Sizes 625-24 6-32, 8-32, 10-24 625-32 6-32, 8-32, 10-32

Replacement Taps

Replacement Taps

626-32 628-20

626-24 626-32

10-32, 8-32, 6-32 10-24, 12-24, 1/4-20

Cushion-Grip Scratch Awl

Color Code blue orange

Overall Length 7-1/8" (181 mm) 7-1/8" (181 mm)

Screwdrivers, Nut Drivers & Accessories

Cat. No. 623-20 623-24 623-32 626

626

Weight (lbs.) 0.20 0.20

for Cat. No. 625-24 for Cat. No. 625-32

Steel Scratch Awl

650 • Professional, heavy-duty, hard-pointed awl. • Scribes metal, starts screw holes, performs a variety of piercing and punching jobs. • Rigid, chrome-plated, heat-treated, tempered-steel shank

has full reinforcing bolster at handle for extra strength and for handle impact reinforcement. Internal flanges provide solid shank anchor. Cushion-Grip handle allows for greater comfort.

•  • 

Cat. No.

Blade Length

Overall Length

Weight (lbs.)

650

3-1/2" (89 mm)

7-7/8" (200 mm)

.25

66385

• One-piece forged-steel blade and bolstered shank. • Heat treated for long life. • Well-balanced for top efficiency during use. • Black finish for rust resistance. Cat. No. 66385

Blade Length 3-1/2" (89 mm)

Overall Length 7" (178 mm)

Weight (lbs.) .30

WARNING: Do NOT hammer on tool.

All dimensions are in inches and (millimeters). All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock. NOT insulated. NOT against electrical shock. WARNING: Never use on orWill near liveprotect electrical circuits.

101

Spring Tools Spring Tool

Cushion-Grip Spring Tool

• 

Screwdrivers, Nut Drivers & Accessories

ST49

ST4

Installs or removes small-diameter coil springs on motors, brake shoes, headlights, relays, installing recessed can lighting, solenoids, and hundreds of other applications. Great for rod and leaf springs. Unique C-tip prevents spring slippage. Cushion-Grip handle for greater comfort.

•  •  • 

Cat. No. ST4 ST6

Shank Length 4" (102 mm) 6" (152 mm)

Overall Length 7-3/4” (197mm) 9-3/4" (248 mm)

Weight (lbs.) .17 .19

• Installs or removes small-diameter coil springs on motors, brake shoes, headlights, relays, can lighting, solenoids, and hundreds of other applications. Great for rod and leaf springs. Unique C-tip prevents spring slippage.

•  • 

Cat. No. ST49

Overall Length 7-1/2" (191 mm)

Weight (lbs.) .10

Spring Tool Set 2-Piece Recessed Can Light Tool Set • Contains the two tools needed for finishing can light installations in record time. • Long reach, spring tool (Cat. No. ST6) makes attaching difficult springs easy. • Compact, stubby nut driver (Cat. No. 610-1/4) even

fits in smaller cans to tighten hard to reach ceiling height adjustment screws. Cushion-Grip handles for greater torque and comfort.

• 

65020

Cat. No. Set Contains

Weight (lbs.)

65020

.36 Cat. No. Description Shank Length

Overall Length

ST6

6" spring tool

6" (152 mm)

9-3/4" (248 mm)

610-1/4

1/4" stubby nut driver

1-1/2" (38 mm)

3-1/2" (89 mm)

102 All dimensions are in inches and (millimeters).

WARNING: Always wear approved eye protection.

WARNING: NOT insulated. Will NOT protect against electrical shock.