sealer
LITTLE DAVID
SEALER
LD-Xss RTE WASH DOWN CASE SEALER
The LD-Xss RTE is a redesign of our revolutionary wash down stainless steel case sealer. It is the ideal case sealing solutions for ready-to-eat or cooked food processing operations that take extra precautions to eliminate bacteria and other foodborne pathogens.
PERFORMANCE & DESIGN FEATURES: Quick change from 2” to 3” tape in the field Easy access motor for quick change time Quick disconnect electrical cabling Adjustable height levelers Quick release drive belts can be removed and replaced in a matter of seconds, not minutes.
Angled surfaces maximize water shedding
Open design ensures all contact surfaces can be sanitized
LITTLE DAVID® DELIVERS HIGH-PERFORMANCE PACKAGING EQUIPMENT.
Standoffs used to minimize overlapping joints for full access while cleaning
www.loveshaw.com
LITTLE DAVID
LD-Xss RTE SPECIFICATIONS OF THE LD-XSS RTE: Power Requirements: 110 Volts, 60 cycle, single phase 4
Operating Speed: Continuous belt drive, 80’ per minute (24.4m/min) (production rate depends on box size and operator dexterity)
4
3
Closure Material: Pressure sensitive tape Weight: 269 lbs., uncrated
2
B
33.49 / 850.65 Approx. Width
19.49 / 495.03 B
Shown with optional Front Pack Table & Top Squeezers Shown with optional Front Pack Table & Top Squeezers
61.44 / 1560.57 22.25 / 565.15 @ to 22.25 Conv. Height 25.75 / 654.05 Conv. Height
A
Box Range: MAT'L NOTED
51.20 / 1300.59 Length with optional Front Pack Table
A 34.22 / 869.29 Machine Length 51.20 / 1300.59 Length with optional Front Pack Table
NOTE : Belt Speed: 80 ft/min (S Air Reqired: n/a Power Required: 10 amps
22.25 / 565.15 to 25.75 / 654.05 34.22 / 869.29 Conv. Height Machine Length
4
DISTRIBUTED BY:
PART # STD
N/A
STAINLESS : NO FINISH
CAD FILE
LDXSS 2.0 MAIN ASSY.idw
PLOT DATE
12/10/2013
DRAWN DATE
3
+FRACTIONS 1/64
2206 Easton Turnpike P.O. Box 83, South Canaan, PA 18459 Tel: (570) 937-4921 Fax: (570) 937-3229 Toll Free: (800) 572-3434 Unit 1 Newton Park West Portway Industrial Estate Andover, Hampshire, SP10 3SH [email protected] Tel: +44 (0)1264 357 511 Fax: +44 (0) 1264 355 964 © 2014 LOVESHAW
http://twitter.com/loveshaw
=+-.050 THE EXPRESSED WRITTEN CONS .X WITHOUT TIT +UPON REQ = +--.015 TO LOVESHAW-ITW INCH .XX RETURNED ANGLES 1/2 .XXX =+-.005 .X =+-1.0mm MACH. METRIC .XX =+- .3mm FINISH .XXX =+-.1mm
2
LOVESHAW Europe
THIS DRAWING AND SUBJECT MATTER TH TOLERANCES UNLESS LOVESHAW-ITW AND IS TO BE TREATED BY OTHERWISE NOTED: INFORMATION. THIS DRAWING OR SUBJEC
REPRODUCED OTHER THAN FOR YOUR OW
11/18/2009
DO NOT SCALE PRINT 3
LOVESHAW
www.youtube.com/loveshaw
L =PART 4.0 #/ 101.6 W = 4.5 / 114.3 STD/ 139.7 5.5 H = 4.5 / 114.3 N/A ( 3.5 / 88.9
STAINLESS : NO FINISH
MAT'L NOTED ST. ST.
4
ST. ST.
THIS DRAWING AND SUBJECT MATTER THEREON IS THE EXCLUSIVE PROPERTY OF LOVESHAW-ITW AND IS TO BE TREATED BY YOU AS CONFIDENTIAL PRPRIETARY INFORMATION. THIS DRAWING OR SUBJECT MATTER THEROF SHALL NOT BE REPRODUCED OTHER THAN FOR YOUR OWN USE OR TO BE DISCLOSED TO OTHER WITHOUT THE EXPRESSED WRITTEN CONSENT OF LOVESHAW-ITW AND WILL BE RETURNED TO LOVESHAW-ITW UPON REQUEST.
Printed in America
REV A
33.49 / 850.65 Approx. Width
19.49 / 495.03
Case Capacity: Length 4” to infinite, Width 4.5” to 27”, Height 4.5” to 24” (certain length x width x height combinations may not process due to unstable conveying conditions) OPTIONS OF THE LD-XSS RTE • Recommended spare parts kit • Spare CAC60 tape cartridge • 3 Phase motor (any voltage) • Stainless steel top squeezers • Stainless steel front pack table • Stainless steel casters • NEMA 4 Wiring-enclosure-switch & motor with epoxy gear reducer
3
125
D
M
SEALER
LD-Xss RTE WASH DOWN CASE SEALER
The LD-Xss RTE is a redesign of our revolutionary wash down stainless steel case sealer. It is the ideal case sealing solutions for ready-to-eat or cooked food processing operations that take extra precautions to eliminate bacteria and other foodborne pathogens.
PERFORMANCE & DESIGN FEATURES: Quick change from 2” to 3” tape in the field Easy access motor for quick change time Quick disconnect electrical cabling Adjustable height levelers Quick release drive belts can be removed and replaced in a matter of seconds, not minutes.
Angled surfaces maximize water shedding
Open design ensures all contact surfaces can be sanitized
LITTLE DAVID® DELIVERS HIGH-PERFORMANCE PACKAGING EQUIPMENT.
Standoffs used to minimize overlapping joints for full access while cleaning
www.loveshaw.com
LITTLE DAVID
LD-Xss RTE SPECIFICATIONS OF THE LD-XSS RTE: Power Requirements: 110 Volts, 60 cycle, single phase 4
Operating Speed: Continuous belt drive, 80’ per minute (24.4m/min) (production rate depends on box size and operator dexterity)
4
3
Closure Material: Pressure sensitive tape Weight: 269 lbs., uncrated
2
B
33.49 / 850.65 Approx. Width
19.49 / 495.03 B
Shown with optional Front Pack Table & Top Squeezers Shown with optional Front Pack Table & Top Squeezers
61.44 / 1560.57 22.25 / 565.15 @ to 22.25 Conv. Height 25.75 / 654.05 Conv. Height
A
Box Range: MAT'L NOTED
51.20 / 1300.59 Length with optional Front Pack Table
A 34.22 / 869.29 Machine Length 51.20 / 1300.59 Length with optional Front Pack Table
NOTE : Belt Speed: 80 ft/min (S Air Reqired: n/a Power Required: 10 amps
22.25 / 565.15 to 25.75 / 654.05 34.22 / 869.29 Conv. Height Machine Length
4
DISTRIBUTED BY:
PART # STD
N/A
STAINLESS : NO FINISH
CAD FILE
LDXSS 2.0 MAIN ASSY.idw
PLOT DATE
12/10/2013
DRAWN DATE
3
+FRACTIONS 1/64
2206 Easton Turnpike P.O. Box 83, South Canaan, PA 18459 Tel: (570) 937-4921 Fax: (570) 937-3229 Toll Free: (800) 572-3434 Unit 1 Newton Park West Portway Industrial Estate Andover, Hampshire, SP10 3SH [email protected] Tel: +44 (0)1264 357 511 Fax: +44 (0) 1264 355 964 © 2014 LOVESHAW
http://twitter.com/loveshaw
=+-.050 THE EXPRESSED WRITTEN CONS .X WITHOUT TIT +UPON REQ = +--.015 TO LOVESHAW-ITW INCH .XX RETURNED ANGLES 1/2 .XXX =+-.005 .X =+-1.0mm MACH. METRIC .XX =+- .3mm FINISH .XXX =+-.1mm
2
LOVESHAW Europe
THIS DRAWING AND SUBJECT MATTER TH TOLERANCES UNLESS LOVESHAW-ITW AND IS TO BE TREATED BY OTHERWISE NOTED: INFORMATION. THIS DRAWING OR SUBJEC
REPRODUCED OTHER THAN FOR YOUR OW
11/18/2009
DO NOT SCALE PRINT 3
LOVESHAW
www.youtube.com/loveshaw
L =PART 4.0 #/ 101.6 W = 4.5 / 114.3 STD/ 139.7 5.5 H = 4.5 / 114.3 N/A ( 3.5 / 88.9
STAINLESS : NO FINISH
MAT'L NOTED ST. ST.
4
ST. ST.
THIS DRAWING AND SUBJECT MATTER THEREON IS THE EXCLUSIVE PROPERTY OF LOVESHAW-ITW AND IS TO BE TREATED BY YOU AS CONFIDENTIAL PRPRIETARY INFORMATION. THIS DRAWING OR SUBJECT MATTER THEROF SHALL NOT BE REPRODUCED OTHER THAN FOR YOUR OWN USE OR TO BE DISCLOSED TO OTHER WITHOUT THE EXPRESSED WRITTEN CONSENT OF LOVESHAW-ITW AND WILL BE RETURNED TO LOVESHAW-ITW UPON REQUEST.
Printed in America
REV A
33.49 / 850.65 Approx. Width
19.49 / 495.03
Case Capacity: Length 4” to infinite, Width 4.5” to 27”, Height 4.5” to 24” (certain length x width x height combinations may not process due to unstable conveying conditions) OPTIONS OF THE LD-XSS RTE • Recommended spare parts kit • Spare CAC60 tape cartridge • 3 Phase motor (any voltage) • Stainless steel top squeezers • Stainless steel front pack table • Stainless steel casters • NEMA 4 Wiring-enclosure-switch & motor with epoxy gear reducer
3
125
D
M
