Series 709DCDA - Watts Water Technologies
ES-709DCDA
For Non-Health Hazard Applications Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
Series 709DCDA
Double Check Detector Assemblies Sizes: 3" – 10" (80 – 250mm) Series 709DCDA Double Check Detector Assemblies are designed exclusively for use in accordance with water authority containment requirements. It is mandatory to prevent the reverse flow of fire protection system substances, i.e. glycerin wetting agents, stagnant water and water of non-potable quality from being pumped or siphoned into the potable water line. Benefits: Detects leaks . . . with emphasis on the cost of unaccountable water; incorporates a meter which allows the water utility to:
709DCDAOSY
• detect leaks underground that historically create great annual cost due to waste. • provide a detection point for unauthorized use. It can help locate illegal taps.
Check Assembly Module
Test Cock Cover
Modular check design concept facilitates maintenance and assembly access. All sizes are standardly equipped with resilient seated OSY shutoff valves, 5⁄8" x 3⁄4" (16 x 19mm) meter and ball type test cocks.
Features • Body construction fused epoxy coated cast iron • Replaceable bronze seats
Seat
Disc
• Maximum flow at low pressure drop • Compact for economy combined with performance • Design simplicity for easy maintenance • Furnished with 5⁄8" x 3⁄4" (16 x 19mm) bronze meter • No special tools required for servicing
Check Assembly Module Features a modular design concept which facilitates complete maintenance and assembly by retaining the spring load. First and second check valve spring modules are not interchangeable.
Specifications A Double Check Detector Assembly shall be installed on fire protection systems when connected to a potable water supply. Degree of hazard present is determined by the local authority having jurisdiction. The unit shall be a complete assembly including UL listed resilient seated OSY shutoff valves and test cocks. The unit shall be UL/FM approved with UL/FM approved OSY shutoff valves. The auxiliary line shall consist of an approved backflow preventer and water meter. The assembly shall meet the basic requirements of ASSE 1048; AWWA Std. C510 for Double Check Valves. Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. Assembly shall be a Watts Regulator Company Series 709DCDA.
Now Available
WattsBox Insulated Enclosures. For more information, send for literature ES-WB. IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES FOR LOCAL INSTALLATION REQUIREMENTS
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Pressure – Temperature
Materials Body:
Epoxy coated cast iron
Seat:
Bronze
Temperature Range: 33˚F – 110˚F ( 0.5˚ – 43˚C) continuous, 140˚F (60˚C) intermittent
Disc Holder:
Bronze
Maximum Working Pressure: 175psi (12.1bar)
Trim:
Stainless steel
Standards
Check Valve Discs: Rubber Test Cocks:
AWWA Standard C510
Bronze
Approvals
Models Suffix: OSY - UL/FM outside stem and yoke resilient seated gate valves
B.64
1048
LF - 4" – 10" (100 – 250mm) without shutoff valves
Approved by the foundation for Cross-Connection Controland Hydraulic Research at the University of Southern California. Sizes 4" – 10" (100 – 250mm) approved for horizontal and vertical “flow up”. Size 3" (76mm) approved for horizontal only.
Dimensions – Weights
Factory Mutual approved 4" – 10" (100-250mm) vertical “flow up”.
CFM - cubic feet per minute meter GPM - gallons per minute meter
U* C (open)
D E L
R
T
A
SIZE (DN)
DIMENSIONS A
D
C
E
WEIGHT
L
R
T
U*
In.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
3 4 6 8 10
80 100 150 200 250
40 52 621⁄2 75 90
1016 1321 1588 1905 2286
187⁄8 223⁄4 301⁄8 373⁄4 453⁄4
479 578 765 959 1162
31⁄2 33⁄4 41⁄2 51⁄2 61⁄2
89 95 114 140 165
12 17 21 26 32
305 432 533 660 813
24 34 411⁄2 52 64
610 864 1054 1321 1626
14 15 16 17 18
356 381 406 432 457
3 6 71⁄2 9 101⁄4
76 152 191 229 260
14 14 16 21 25
356 356 406 533 635
* Service clearance for check assembly from center. †UL/FM approved backflow preventers must include UL/FM approved OSY.
W/OSY† gates lbs. kgs.
190 403 727 1327 2093
86 183 330 602 949
Capacity *Typical maximum system flow rate (7.5 ft./Sec.) **UL rated flow 3" (80mm)
8" (200mm)
**
96 14
kPa psi
**
Pressure Drop
Pressure Drop
kPa psi
69 10 41
6
14
2
0
0 0 0
100 380
200 760 5 1.5
300 1140
400 1520
7.5 2.3
15 4.6
96 14
41
6
14
2
0
0
gpm lpm fps mps
0 0
400 1520
800 3040 5 1.5
Pressure Drop
96 14
6
14
2
0
0 0 0
100 380
200 760 5 1.5
kPa psi
**
300 1140 7.5 2.3
400 1520
500 1900 15 4.6
600 2280
gpm lpm fps mps
6" (150mm)
**
Pressure Drop
96 14
**
69 10 41
6
14
2
0
0 0 0
200 760
400 1520 5 1.5
600 2280
800 3040 7.5 2.3
Flow
**
96 14
2000 7600 15 4.6
4000 gpm 15200 lpm fps mps
1000 3800
1200 4500
1400 5320 15 4.6
gpm lpm fps mps
**
69 10 41
6
14
2
0
0 0 0
400 1520
800 3040
1200 4560 5 1.5
1600 6080
2000 7600 7.5 2.3
Flow
Flow
kPa psi
1600 6080
10" (250mm)
4" (100mm)
69 10 41
1200 456 7.5 2.3
Flow
Pressure Drop
**
**
69 10
Flow
kPa psi
**
2400 9120
2800 10,640
3200 3600 4000 12,160 13,680 15200 15 4.6
gpm lpm fps mps
For additional information, visit our web site at: www.watts.com
A Watts Water Technologies Company
ES-709DCDA
0638
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
© 2009 Watts
For Non-Health Hazard Applications Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––
Approval
Engineer –––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval –––––––––––––––––––––––––––––––––––––––––––––
Representative
–––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
Series 709DCDA
Double Check Detector Assemblies Sizes: 3" – 10" (80 – 250mm) Series 709DCDA Double Check Detector Assemblies are designed exclusively for use in accordance with water authority containment requirements. It is mandatory to prevent the reverse flow of fire protection system substances, i.e. glycerin wetting agents, stagnant water and water of non-potable quality from being pumped or siphoned into the potable water line. Benefits: Detects leaks . . . with emphasis on the cost of unaccountable water; incorporates a meter which allows the water utility to:
709DCDAOSY
• detect leaks underground that historically create great annual cost due to waste. • provide a detection point for unauthorized use. It can help locate illegal taps.
Check Assembly Module
Test Cock Cover
Modular check design concept facilitates maintenance and assembly access. All sizes are standardly equipped with resilient seated OSY shutoff valves, 5⁄8" x 3⁄4" (16 x 19mm) meter and ball type test cocks.
Features • Body construction fused epoxy coated cast iron • Replaceable bronze seats
Seat
Disc
• Maximum flow at low pressure drop • Compact for economy combined with performance • Design simplicity for easy maintenance • Furnished with 5⁄8" x 3⁄4" (16 x 19mm) bronze meter • No special tools required for servicing
Check Assembly Module Features a modular design concept which facilitates complete maintenance and assembly by retaining the spring load. First and second check valve spring modules are not interchangeable.
Specifications A Double Check Detector Assembly shall be installed on fire protection systems when connected to a potable water supply. Degree of hazard present is determined by the local authority having jurisdiction. The unit shall be a complete assembly including UL listed resilient seated OSY shutoff valves and test cocks. The unit shall be UL/FM approved with UL/FM approved OSY shutoff valves. The auxiliary line shall consist of an approved backflow preventer and water meter. The assembly shall meet the basic requirements of ASSE 1048; AWWA Std. C510 for Double Check Valves. Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California. Assembly shall be a Watts Regulator Company Series 709DCDA.
Now Available
WattsBox Insulated Enclosures. For more information, send for literature ES-WB. IMPORTANT: INQUIRE WITH GOVERNING AUTHORITIES FOR LOCAL INSTALLATION REQUIREMENTS
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Pressure – Temperature
Materials Body:
Epoxy coated cast iron
Seat:
Bronze
Temperature Range: 33˚F – 110˚F ( 0.5˚ – 43˚C) continuous, 140˚F (60˚C) intermittent
Disc Holder:
Bronze
Maximum Working Pressure: 175psi (12.1bar)
Trim:
Stainless steel
Standards
Check Valve Discs: Rubber Test Cocks:
AWWA Standard C510
Bronze
Approvals
Models Suffix: OSY - UL/FM outside stem and yoke resilient seated gate valves
B.64
1048
LF - 4" – 10" (100 – 250mm) without shutoff valves
Approved by the foundation for Cross-Connection Controland Hydraulic Research at the University of Southern California. Sizes 4" – 10" (100 – 250mm) approved for horizontal and vertical “flow up”. Size 3" (76mm) approved for horizontal only.
Dimensions – Weights
Factory Mutual approved 4" – 10" (100-250mm) vertical “flow up”.
CFM - cubic feet per minute meter GPM - gallons per minute meter
U* C (open)
D E L
R
T
A
SIZE (DN)
DIMENSIONS A
D
C
E
WEIGHT
L
R
T
U*
In.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
3 4 6 8 10
80 100 150 200 250
40 52 621⁄2 75 90
1016 1321 1588 1905 2286
187⁄8 223⁄4 301⁄8 373⁄4 453⁄4
479 578 765 959 1162
31⁄2 33⁄4 41⁄2 51⁄2 61⁄2
89 95 114 140 165
12 17 21 26 32
305 432 533 660 813
24 34 411⁄2 52 64
610 864 1054 1321 1626
14 15 16 17 18
356 381 406 432 457
3 6 71⁄2 9 101⁄4
76 152 191 229 260
14 14 16 21 25
356 356 406 533 635
* Service clearance for check assembly from center. †UL/FM approved backflow preventers must include UL/FM approved OSY.
W/OSY† gates lbs. kgs.
190 403 727 1327 2093
86 183 330 602 949
Capacity *Typical maximum system flow rate (7.5 ft./Sec.) **UL rated flow 3" (80mm)
8" (200mm)
**
96 14
kPa psi
**
Pressure Drop
Pressure Drop
kPa psi
69 10 41
6
14
2
0
0 0 0
100 380
200 760 5 1.5
300 1140
400 1520
7.5 2.3
15 4.6
96 14
41
6
14
2
0
0
gpm lpm fps mps
0 0
400 1520
800 3040 5 1.5
Pressure Drop
96 14
6
14
2
0
0 0 0
100 380
200 760 5 1.5
kPa psi
**
300 1140 7.5 2.3
400 1520
500 1900 15 4.6
600 2280
gpm lpm fps mps
6" (150mm)
**
Pressure Drop
96 14
**
69 10 41
6
14
2
0
0 0 0
200 760
400 1520 5 1.5
600 2280
800 3040 7.5 2.3
Flow
**
96 14
2000 7600 15 4.6
4000 gpm 15200 lpm fps mps
1000 3800
1200 4500
1400 5320 15 4.6
gpm lpm fps mps
**
69 10 41
6
14
2
0
0 0 0
400 1520
800 3040
1200 4560 5 1.5
1600 6080
2000 7600 7.5 2.3
Flow
Flow
kPa psi
1600 6080
10" (250mm)
4" (100mm)
69 10 41
1200 456 7.5 2.3
Flow
Pressure Drop
**
**
69 10
Flow
kPa psi
**
2400 9120
2800 10,640
3200 3600 4000 12,160 13,680 15200 15 4.6
gpm lpm fps mps
For additional information, visit our web site at: www.watts.com
A Watts Water Technologies Company
ES-709DCDA
0638
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
© 2009 Watts
