Filter Turn on Transient process time Start up time Absolute Maximum Rating
Maximum
Units VDC
Capacitor 25
ms ms
200 0-7 0-15 0-28 100
5 Vin 12 Vin 24 Vin
Peak Input Voltage time
VDC ms
Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance
Conditions
Typical
3 sec
Rated
Units
1000 all models, 3000 (single output)
VDC MOhm pF
> 1000 60
Output Specifications Parameters
Conditions
Voltage accuracy Short Circuit protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output model Load voltage regulation (Dual) Load voltage regulation (Dual) 3.3V output model Temperature coefficient Ripple & Noise Rising time
For 1% change of Vin For 1% change of Vin Load 20 – 100% Load 20 – 100% Load 20 – 100% Load 20 – 100% At 20MHz Bandwidth
Units % % % % % % % %/oC mV p-p ms
General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity
www.aimtec.com F 051e R11.F
Conditions
Typical
100% load Full Load without Derating
80
Maximum
Units
90
KHz o C o C o C
90
%
-40 to+85 -55 to +125 Free air convection
Tel: +1 514 620 2722 3 of 4
Toll free: + 1 888 9 AIMTEC (924 6832) North America only
Series AM1P-Z 1 Watt | DC-DC Converter General Specifications (continued) Parameters
Conditions
Typical
Case material Weight
Non-conductive black plastic 1.8
Maximum
Units g
Dimensions (L x W x H) 0.50 x 0.40 x 0.27 inches 12.70 x 10.16 x 6.85 mm MTBF >1 191 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity