Skateboard Trucks Replacement

Skateboard Trucks Replacement

Skateboard Trucks Replacement How to replace trucks on a skateboard.

Written By: Martin Nelson

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

Skateboard Trucks Replacement

INTRODUCTION Broke your skateboard deck and don't want to buy a complete? Bought new truck? In this guide I will teach you how to replace trucks.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

Skateboard Trucks Replacement

Step 1 — Trucks



First you are going grab your T tool. If you don't have one, buy one , or grab a 3/8" socket and allen or phillips head (depending on the screws on your skateboard).

Step 2



Then you get your deck and your trucks.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

Skateboard Trucks Replacement

Step 3 

Put the 8 screws in the 8 mounting holes on the deck.



Put the trucks on the bottom of the skateboard on the screws. Then loosely tighten the nuts on the screws.

Step 4

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

Skateboard Trucks Replacement

Step 5 

Put the allen or phillips head on the screw to hold it in place then put the 3/8" socket on the bolt. Tighten the bolts and start riding because you just set up your skateboard

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 10:52:45 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5