SL Spec Sheet - Platt Electric Supply
SL
SPECIFICATION SHEET
Side
Grill Front
Wall Can Side
127/8” 32.7
Side
Grill Front
10” 25.4
Wall Can Side
13/ 16” 2.06
127/8” 32.7
111/8” 28.26
16¾” 42.54
10” 25.4
Wall Can Bottom 14½” 36.83 4” 10.16
13/ 16” 2.06
111/8” 28.26
3” 7.62
7 /8” 2.22
16¾” 42.54
Wall Can Bottom 14½” 36.83
General Information: 3” 4” Design and performance 7.62 come together in our SL heater. A great option for larger areas with limited wall 10.16 space, the SL heater includes a unique fan that quietly delivers uniform and efficient heat. 7 /8” 2.22
Architectural – Engineering Information: Fan forced electric air heaters shall be UL listed, factory rated at 120V, and dual field rated 208V/240V. The elements and blower shall be of unitized construction and attach to wall can with four screws. Elements shall be of nichrome type with an oversized 25 amp rated, at 240V, high temperature manual reset limit switch. A blower delivering approximately 65 CFM shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating chamber. Metal grill shall be of one piece, 22 gauge construction and finished with a powder coat paint system. A painted 22 gauge wall mounting can with 2 knockouts and 70 cubic inch wiring compartment is also available.
www.cadetheat.com
PO Box 1675 Vancouver, WA 98668-1675
360-693-2505
SPECIFICATION SHEET
Side
Grill Front
Wall Can Side
127/8” 32.7
Side
Grill Front
10” 25.4
Wall Can Side
13/ 16” 2.06
127/8” 32.7
111/8” 28.26
16¾” 42.54
10” 25.4
Wall Can Bottom 14½” 36.83 4” 10.16
13/ 16” 2.06
111/8” 28.26
3” 7.62
7 /8” 2.22
16¾” 42.54
Wall Can Bottom 14½” 36.83
General Information: 3” 4” Design and performance 7.62 come together in our SL heater. A great option for larger areas with limited wall 10.16 space, the SL heater includes a unique fan that quietly delivers uniform and efficient heat. 7 /8” 2.22
Architectural – Engineering Information: Fan forced electric air heaters shall be UL listed, factory rated at 120V, and dual field rated 208V/240V. The elements and blower shall be of unitized construction and attach to wall can with four screws. Elements shall be of nichrome type with an oversized 25 amp rated, at 240V, high temperature manual reset limit switch. A blower delivering approximately 65 CFM shall be driven by an impedance protected motor. The motor shall be totally isolated from the heating chamber. Metal grill shall be of one piece, 22 gauge construction and finished with a powder coat paint system. A painted 22 gauge wall mounting can with 2 knockouts and 70 cubic inch wiring compartment is also available.
www.cadetheat.com
PO Box 1675 Vancouver, WA 98668-1675
360-693-2505
