SME Newsletter 2013-10.pub
Society of Manufacturing Engineers York Chapter #22 York, PA
Chapter Meeting: JOINT TOUR & PRESENTATIONS BETWEEN THE ENGINEERING SOCIETY OF YORK (ESOY) & THE YORK CHAPTER OF SOCIETY OF MANUFACTURING ENGINEERS (SME)
October 15, 2013
Robotic Systems from Weldon Solutions
FAST
FLEXIBLE
EFFICIENT
Contact WELDON SOLUTIONS for Turnkey Robotic Systems to improve your production efficiency and reduce costs. We’ve custom-designed and installed systems for Machine Tending, Material Removal, Palletizing, Packaging, Dispensing and many other applications. We provide on-site programming and technical support. Call us to discuss your automation needs!
weldonsolutions.com
425 East Berlin Road York, PA 17408 717-846-4000
SOCIETY OF MANUFACTURING ENGINEERS SME York Chapter #22 York, PA Phone: (717) 843-0041 Email: [email protected] JERRY GOLDBERG (MANAGER) (Lifetime SME Member) (For any questions regarding SME: Meeting Information, Address Changes, etc., Please Contact Us)
Chapter #22 Team: Officers & Committee Chairmen Office Chairman: Matthew Malkie
Military & Commercial Fasteners Corp.
Fax
717-767-6856
717-764-2864
717-428-0222 Ext. 249
717-428-0333
717-755-1900
717-757-9437
Chairman-Elect: Secretary: Ed Zimmerman Mercury Electronics Treasurer: William Tollinger Flinchbaugh Engineering, Inc. Recruitment & Meetings: Jerry Goldberg Jerry Goldberg & Associates, Inc.
717-843-0041
Long Range Planning / Technical Programs: Thomas Yingling
717-428-1477
Bulletin Editor: Dustine Mercy
717-993-5038
On-Trak Plexus, LLC
Bulletin Advertising: Committee
CHAPTER #22 2013 SPONSORS Prime Sponsor $250 + Flinchbaugh Engineering Inc. Harley-Davidson Inc. E. H. Zimmerman, CMFGE, P.E. Sponsor $100 - $249 Mantec Mercury Electronics Military Commercial Fasteners Contributor $50 - $99 Wilke Enginuity Herr Tool Sales Friend $25 - $49
2
717-428-2865
SME Chapter 22 Executive Committee Meeting Meeting Date: May 13, 2013 Location: Hoss’s, East York Board Members attending were:
Jerry Goldberg, Matt Malkie, Bill Tollinger, Tom Yingling, Ed Zimmerman.
The Chairman opened the meeting at: 5:36 PM. The Secretary distributed copies and read the minutes from the April 08, 2013 meeting. Motion to approve by Jerry, seconded by Tom. The Treasurer distributed copies of his report and reviewed the activity for the month of April. The report shows a month-ending balance of $5295.89. Motion to approve by Jerry, seconded by Ed. Membership Recruitment: Chapter 22 lost ten members (primarily students) for the month and gained three. The National report still contains confusing and conflicting information. Old Business: The York College Engineering Department presentation and tour drew 20 attendees representing 15 companies. There were four no-shows. We discussed the potential for awarding PDHs for some of our meetings. I have been researching this and will have a program ready for review at our August Board meeting. New Business: We discussed some potential locations for meetings to be scheduled after our summer break. Some board members will be pursuing them over the summer. Board Meetings are set for August 19 (amended), September 10 (amended), October 14, and November 12 (Tuesday) at Hoss’s in East York. The meetings start at 5:30PM. Motion to Adjourn: by Jerry, seconded by Bill. Meeting adjourned at 6:35 PM. Respectfully submitted, Ed Zimmerman, Secretary, Chapter 22 3
JOINT TOUR & PRESENTATIONS BETWEEN THE ENGINEERING SOCIETY OF YORK (ESOY) & THE YORK CHAPTER OF SOCIETY OF MANUFACTURING ENGINEERS (SME)
Coupling Corporation of America, Inc. is a leading and innovative manufacturer of shaft couplings, flexible shaft couplings and keyless hubs for large rotating machinery and other shaft coupling applications. Since 1968, CCA has been making shaft couplings by focusing on the driving and driven machines, and then designing couplings to complement them. Power plants, refineries, and large process plants use our flexible couplings for applications which include gas turbines, pumps, auxiliary drive turbines, feed rollers, compressors, marine applications, generators, motor drives, high misalignment areas, and high thermal growth equipment. www.couplingcorp.com
TRY TEK Machine Works, Inc. has been a leading manufacturer and worldwide supplier of quality equipment for the Trenchless Pipe Rehabilitation Industry, since 1985. TRY TEK was the first to develop and sell an electro-pneumatic LATERAL TAP CUTTER for reinstating laterals in relined pipe as small as 6 inches. This cutter is used for reinstating laterals in relined 6 inch and larger pipe. Hundreds are in use around the world in the sanitary sewer, storm, water and natural gas pipe rehabilitation industry. Recently we have expanded our product offering to include water inversion units for installing CIPP liner 6” to 18” pipe. Also, we have developed a small cutting system using a patented water hydraulics technology to cut in 3” to 6” relined pipe and even negotiate 90 degree bends. TRY TEK is helping the world maintain its underground infrastructure without digging. www.trytek.com
TECHFIRE 225 is a FIRST Robotics competition team based in the York, PA area that encourages students to pursue STEAM (Science, Technology, Engineering, Arts, and Math) career paths. FIRST Robotics is a global program with over 2,500 teams worldwide. FIRST was founded to change our culture’s perception of engineering education. TechFire includes students from both York and Lancaster counties, from multiple high schools, both public and private. The team is a year-round extracurricular activity that focuses on inspiring students to embrace working with science and technology concepts. The team is built like a small business, with different students focusing on different aspects of the program. Students have opportunities to do computer-aided design, fabrication, software, and publication work, while being mentored by parents, engineers, and educators. www.techfire225.com
CHAPTER #22
JOINT TOUR & PRESENTATIONS BETWEEN:
YORK, PA
THE ENGINEERING SOCIETY OF YORK (ESOY) & THE SOCIETY OF MANUFACTURING ENGINEERS (SME) YORK CHAPTER TUESDAY, OCTOBER 15, 2013 DINNER & PROGRAM LOCATION -
MENU -
TRY TEK MACHINE WORKS, INC. 250 N. MAIN ST. JACOBUS, PA 17311 (717) 428-1477
Catered by Lucien St. Onge of Creative Catering Tuscany Chicken, Roasted Veggies, Roasted Red Potatoes, Salad, Dessert, Drinks
COST TIME SCHEDULE -
$18.00 (Payable at Meeting Check In) Check In: Dinner: Presentations:
5:15 P.M. – 5:45 P.M. 5:45 P.M. – 6:30 P.M. 6:30 P.M. – 8:00 P.M.
Five minute introduction and instruction (safety glasses or hearing protection will not be required) Group will be split into 3 groups and run concurrently. One group will start with Tech Fire Robotics – 30 minutes One group will start with Coupling Corp – 30 minutes One group will start with TRY TEK – 30 minutes Each group will advance to the next presentation. Recognition & Q & A: 8:00 PM – 8:30 PM Kinsley and SME to make presentation of support for Tech Fire Robotics for 2014. Open floor to questions. FOR RESERVATIONS CALL: JERRY GOLDBERG (717) 843-0041 DEADLINE – FRIDAY, OCTOBER 11, 2013 (Please Note: If you do not cancel confirmed reservations within 48 hours prior to meeting, SME is charged forthat meal. You in turn will be charged.)
Directions: Coupling Corporation, TRY TEK Machine Works and TechFire225 Robotics are located in the same building at 250 N. Main St., Jacobus, PA just 9.5 miles south of Rt. 30 and Rt. 83 in York, PA. From York: Take Rt. 83 south to the Leaders Heights exit (Exit 14). Turn right onto Leaders Heights Rd. (Rt. 182) head west to the second traffic light (.5 mi). At the light turn left onto George St. (Susquehanna Trail) travel 1.7 miles south. Company is on right across from Holiday Gas. From the Maryland line: Take Rt. 83 north the Loganville exit (Exit 10) turn right and head west on North St. to the traffic light. At the light turn right onto George St. (Susquehanna Trail) travel 1.8 miles north. Company is on left across from Holiday Gas.
4
Chapter Meeting: JOINT TOUR & PRESENTATIONS BETWEEN THE ENGINEERING SOCIETY OF YORK (ESOY) & THE YORK CHAPTER OF SOCIETY OF MANUFACTURING ENGINEERS (SME)
October 15, 2013
Robotic Systems from Weldon Solutions
FAST
FLEXIBLE
EFFICIENT
Contact WELDON SOLUTIONS for Turnkey Robotic Systems to improve your production efficiency and reduce costs. We’ve custom-designed and installed systems for Machine Tending, Material Removal, Palletizing, Packaging, Dispensing and many other applications. We provide on-site programming and technical support. Call us to discuss your automation needs!
weldonsolutions.com
425 East Berlin Road York, PA 17408 717-846-4000
SOCIETY OF MANUFACTURING ENGINEERS SME York Chapter #22 York, PA Phone: (717) 843-0041 Email: [email protected] JERRY GOLDBERG (MANAGER) (Lifetime SME Member) (For any questions regarding SME: Meeting Information, Address Changes, etc., Please Contact Us)
Chapter #22 Team: Officers & Committee Chairmen Office Chairman: Matthew Malkie
Military & Commercial Fasteners Corp.
Fax
717-767-6856
717-764-2864
717-428-0222 Ext. 249
717-428-0333
717-755-1900
717-757-9437
Chairman-Elect: Secretary: Ed Zimmerman Mercury Electronics Treasurer: William Tollinger Flinchbaugh Engineering, Inc. Recruitment & Meetings: Jerry Goldberg Jerry Goldberg & Associates, Inc.
717-843-0041
Long Range Planning / Technical Programs: Thomas Yingling
717-428-1477
Bulletin Editor: Dustine Mercy
717-993-5038
On-Trak Plexus, LLC
Bulletin Advertising: Committee
CHAPTER #22 2013 SPONSORS Prime Sponsor $250 + Flinchbaugh Engineering Inc. Harley-Davidson Inc. E. H. Zimmerman, CMFGE, P.E. Sponsor $100 - $249 Mantec Mercury Electronics Military Commercial Fasteners Contributor $50 - $99 Wilke Enginuity Herr Tool Sales Friend $25 - $49
2
717-428-2865
SME Chapter 22 Executive Committee Meeting Meeting Date: May 13, 2013 Location: Hoss’s, East York Board Members attending were:
Jerry Goldberg, Matt Malkie, Bill Tollinger, Tom Yingling, Ed Zimmerman.
The Chairman opened the meeting at: 5:36 PM. The Secretary distributed copies and read the minutes from the April 08, 2013 meeting. Motion to approve by Jerry, seconded by Tom. The Treasurer distributed copies of his report and reviewed the activity for the month of April. The report shows a month-ending balance of $5295.89. Motion to approve by Jerry, seconded by Ed. Membership Recruitment: Chapter 22 lost ten members (primarily students) for the month and gained three. The National report still contains confusing and conflicting information. Old Business: The York College Engineering Department presentation and tour drew 20 attendees representing 15 companies. There were four no-shows. We discussed the potential for awarding PDHs for some of our meetings. I have been researching this and will have a program ready for review at our August Board meeting. New Business: We discussed some potential locations for meetings to be scheduled after our summer break. Some board members will be pursuing them over the summer. Board Meetings are set for August 19 (amended), September 10 (amended), October 14, and November 12 (Tuesday) at Hoss’s in East York. The meetings start at 5:30PM. Motion to Adjourn: by Jerry, seconded by Bill. Meeting adjourned at 6:35 PM. Respectfully submitted, Ed Zimmerman, Secretary, Chapter 22 3
JOINT TOUR & PRESENTATIONS BETWEEN THE ENGINEERING SOCIETY OF YORK (ESOY) & THE YORK CHAPTER OF SOCIETY OF MANUFACTURING ENGINEERS (SME)
Coupling Corporation of America, Inc. is a leading and innovative manufacturer of shaft couplings, flexible shaft couplings and keyless hubs for large rotating machinery and other shaft coupling applications. Since 1968, CCA has been making shaft couplings by focusing on the driving and driven machines, and then designing couplings to complement them. Power plants, refineries, and large process plants use our flexible couplings for applications which include gas turbines, pumps, auxiliary drive turbines, feed rollers, compressors, marine applications, generators, motor drives, high misalignment areas, and high thermal growth equipment. www.couplingcorp.com
TRY TEK Machine Works, Inc. has been a leading manufacturer and worldwide supplier of quality equipment for the Trenchless Pipe Rehabilitation Industry, since 1985. TRY TEK was the first to develop and sell an electro-pneumatic LATERAL TAP CUTTER for reinstating laterals in relined pipe as small as 6 inches. This cutter is used for reinstating laterals in relined 6 inch and larger pipe. Hundreds are in use around the world in the sanitary sewer, storm, water and natural gas pipe rehabilitation industry. Recently we have expanded our product offering to include water inversion units for installing CIPP liner 6” to 18” pipe. Also, we have developed a small cutting system using a patented water hydraulics technology to cut in 3” to 6” relined pipe and even negotiate 90 degree bends. TRY TEK is helping the world maintain its underground infrastructure without digging. www.trytek.com
TECHFIRE 225 is a FIRST Robotics competition team based in the York, PA area that encourages students to pursue STEAM (Science, Technology, Engineering, Arts, and Math) career paths. FIRST Robotics is a global program with over 2,500 teams worldwide. FIRST was founded to change our culture’s perception of engineering education. TechFire includes students from both York and Lancaster counties, from multiple high schools, both public and private. The team is a year-round extracurricular activity that focuses on inspiring students to embrace working with science and technology concepts. The team is built like a small business, with different students focusing on different aspects of the program. Students have opportunities to do computer-aided design, fabrication, software, and publication work, while being mentored by parents, engineers, and educators. www.techfire225.com
CHAPTER #22
JOINT TOUR & PRESENTATIONS BETWEEN:
YORK, PA
THE ENGINEERING SOCIETY OF YORK (ESOY) & THE SOCIETY OF MANUFACTURING ENGINEERS (SME) YORK CHAPTER TUESDAY, OCTOBER 15, 2013 DINNER & PROGRAM LOCATION -
MENU -
TRY TEK MACHINE WORKS, INC. 250 N. MAIN ST. JACOBUS, PA 17311 (717) 428-1477
Catered by Lucien St. Onge of Creative Catering Tuscany Chicken, Roasted Veggies, Roasted Red Potatoes, Salad, Dessert, Drinks
COST TIME SCHEDULE -
$18.00 (Payable at Meeting Check In) Check In: Dinner: Presentations:
5:15 P.M. – 5:45 P.M. 5:45 P.M. – 6:30 P.M. 6:30 P.M. – 8:00 P.M.
Five minute introduction and instruction (safety glasses or hearing protection will not be required) Group will be split into 3 groups and run concurrently. One group will start with Tech Fire Robotics – 30 minutes One group will start with Coupling Corp – 30 minutes One group will start with TRY TEK – 30 minutes Each group will advance to the next presentation. Recognition & Q & A: 8:00 PM – 8:30 PM Kinsley and SME to make presentation of support for Tech Fire Robotics for 2014. Open floor to questions. FOR RESERVATIONS CALL: JERRY GOLDBERG (717) 843-0041 DEADLINE – FRIDAY, OCTOBER 11, 2013 (Please Note: If you do not cancel confirmed reservations within 48 hours prior to meeting, SME is charged forthat meal. You in turn will be charged.)
Directions: Coupling Corporation, TRY TEK Machine Works and TechFire225 Robotics are located in the same building at 250 N. Main St., Jacobus, PA just 9.5 miles south of Rt. 30 and Rt. 83 in York, PA. From York: Take Rt. 83 south to the Leaders Heights exit (Exit 14). Turn right onto Leaders Heights Rd. (Rt. 182) head west to the second traffic light (.5 mi). At the light turn left onto George St. (Susquehanna Trail) travel 1.7 miles south. Company is on right across from Holiday Gas. From the Maryland line: Take Rt. 83 north the Loganville exit (Exit 10) turn right and head west on North St. to the traffic light. At the light turn right onto George St. (Susquehanna Trail) travel 1.8 miles north. Company is on left across from Holiday Gas.
4
