smith system plato tablet chair assembly

Flavors/Plato P-Tablet/Rhombus Chair Assembly Instructions

For assistance in assembling product, missing or damaged parts, or to place an order please contact customer service at 1-800-328-1061. You may also place your order online at www.smithsystem.com

Tools Needed:

Phillips Head #2

Hardware Components:

Flavors or Plato

(70080) (QTY 12) 3/16” x5/8” wood screws

(69742) Clamps

Flavors/Plato ‘P -Tablet Arm Frame

P-Tablet

Rhombus Tablet

1714 East 14th Street Plano, Texas 75074 (800) 328-1061 Fax (972) 398-4051 www.smithsystem.com

Flavors/Plato P-Tablet/Rhombus Chair Directions 1. Place your 3/4” P-Tablet or Rhombus top laminate side down on a clean, dry surface. Place the Tablet Arm Frame on the Tablet Top. Locate the (5) Clamps and line them up with the holes in the frame.

2. Attach the clamps to the top with the (12) 3/16” x 5/8” wood screws.

1714 East 14th Street Plano, Texas 75074 (800) 328-1061 Fax (972) 398-4051 www.smithsystem.com

Flavors/Plato P-Tablet/Rhombus Chair Directions 3. Remove the stacking bumpers from the bottom of the chair by unfastening the screws, and

KEEP THE SCREWS

Remove screw

Stacking bumper

4. Use the same screws to attach the Tablet Arm Assembly to the chair.

Use the same screws to attach the tablet arm in the same location where the stacking bumpers were.

1714 East 14th Street Plano, Texas 75074 (800) 328-1061 Fax (972) 398-4051 www.smithsystem.com