smt micro header - Octopart
F-218
FTSH–110–01–L–DV
10 YEAR MFG WITH 30 µ" GOLD
FTSH–120–01–F–DV
EXTENDED LIFE PRODUCT HIGH MATING CYCLES
FTSH–125–01–L–DV–EJ
(1.27 mm) .050"
SMT MICRO HEADER SPECIFICATIONS
Board Mates: CLP, FLE
For complete specifications and recommended PCB layouts see www.samtec.com?FTSH
Cable Mates: FFSD, FFTP
OTHER SOLUTIONS
APPLICATIONS CLP FTSH
OPTIONS
Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 µ" (1.27 µm) Ni Current Rating (FTSH/CLP): 3.4 A per pin (2 pins powered) Operating Temp Range: -55 °C to +125 °C RoHS Compliant: Yes
–ES OPTION
(1.27 mm) .050"
–P OPTION
HORIZONTAL –EC OPTION
–EP OPTION
PROCESSING
Ultra-low profile option available. End Shrouds available. Call for FTS Series specifications.
Lead-Free Solderable: Yes SMT Lead Coplanarity: –MT & –DV Tail Option: (0.10 mm) .004" max (02-25) –MT & –DH Tail Option: (0.15 mm) .006" max (26-50)
–EJ OPTION
RECOGNITIONS
FTSH
–EL OPTION
–TR OPTION
LEAD STYLE
NO. PINS PER ROW
1
For complete scope of recognitions see www.samtec.com/quality
–01
FILE NO. E111594
ALSO AVAILABLE
–02
100
02
(4.78) .188 (1.27) .050
01
–EX OPTION SHOWN
(5.64) .222
Z
– ES
(2.57) .101 (15.77) .621 (3.33) .131 (5.87) .231 (6.53) .257
–EC 100
–EP –EL
(3.43) .135 (1.27) .050 01
OPTION
–EJ
–EJ OPTION SHOWN No. of positions x (1.27) .050
(0.40) .016 SQ
99
A
A
–04
= (3.81 mm) .150" Post
–05
= (4.32 mm) .170" Post (Mates with CLP–BE)
LEAD STYLE – 01 (5.08) .200
(1.27) .050
(5.84) .230 – DV
– 03
– 05 (1.27) (0.81) (2.29) .050 .032 .090 –MT (Styles –01, –02 & –04 only)
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
– 02
– 04
(2.51) .099
(2.92) .115
Note: Some sizes, styles and options are non-standard, non-returnable. Note: See SFM/TFM for positive alignment feature.
= (1.65 mm) .065" Post (Mates with CLP–D)
–DH (Styles –01, –02, –04 only)
No. of positions x (1.27) .050 + Z
02
–03
(0.81) .032
(0.51) .020 (2.29) .090
99
= (1.91 mm) .075" Post (Mates with FLE)
(5.33) .210
A
No. of positions x (1.27) .050 + Z
(MOQ Required)
• Molded Pick & Place pads • Latches • Other platings Contact Samtec.
= (3.05 mm) .120" Post (Mates with FFSD, CLP–DH)
02 thru 50
FILE NO: 090871_0_000
All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
A (3.05) .120 (1.91) .075 (1.65) .065 (3.81) .150 (4.32) .170
FTSH–112–02–L–DH FTSH–130–02–L–DV–EP
FTSH–116–02–L–DV
FTSH–110–01–F–DV
FTSH–116–03–L–DV–EP–P
FTSH SERIES
Optional guide post
(2.92 mm) .115"
Surface mount
Optional end shrouds and ejector shrouds
(1.27 mm) .050" micro pitch
PLATING OPTION
–F
TAIL OPTION
OPTION
–DV
Leave Blank for -DH & -MT
= Gold flash on post, Matte Tin on tail
= Double Vertical
–L
= Double Horizontal (Styles –01, –02 & –04 only)
= 10 µ" (0.25 µm) Gold on post, Matte Tin on tail
= Polarized Position (Specify position of omitted pin) (Not available with -EX options)
–MT
= Mixed Technology (Styles –01, –02 & –04 only)
–ES
–EL
= End Shroud
= End Shroud with Board Lock (Boards are positively locked and cannot be unmated)
–EC
= End Shroud with Locking Clip (Manual placement required)
–EP
= End Shroud with Guide Post
(1.91) .075 DIA
(3.05) .120
(3.05) .120 (1.22) .048
(4.83) .190
– EC
(0.89) .035 DIA
(2.16) .085
(5.08) .200 (11.18) .440
(3.20) .126
–EJ
–C
= (5.00 mm) .197" DIA Polyimide film Pick & Place Pad (–DH only)
–P
–A
(3.30) .130 x (5.08) .200
–K
= Pick & Place Pad (–DV 4 positions min.) (–DH & –MT not available)
(0.86) .034
–TR
(4.10) .160
(2.29) .090
–EL
–A
= Alignment Pin (–DV 3 positions min.) (–DH 5 positions min.) (Metal or plastic at Samtec discretion)
= Ejector Shroud (Style –01 only) –DH & –MT not available 10 pins/row minimum 25 pins/row maximum
–EP (1.17) .046
= Keying Shroud (For mating with FFSD Style –01 only and 05, 08, 10, 13, 17, 20 & 25 pins/row only. 13, 17, 20 & 25 pins/row only with –EJ option) (–DV only)
–EJ
(4.83) .190
–ES
–K
(Style –02 & –03 only, –DH & –MT not available) 9 pins/row minimum (Other positions available. Call Samtec.)
–“XXX”
–DH
OTHER OPTIONS
FLEX SHROUD OPTIONS
= Tape & Reel Packaging (Flex Shroud options not available except –ES & –EJ)
–P
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
FTSH–110–01–L–DV
10 YEAR MFG WITH 30 µ" GOLD
FTSH–120–01–F–DV
EXTENDED LIFE PRODUCT HIGH MATING CYCLES
FTSH–125–01–L–DV–EJ
(1.27 mm) .050"
SMT MICRO HEADER SPECIFICATIONS
Board Mates: CLP, FLE
For complete specifications and recommended PCB layouts see www.samtec.com?FTSH
Cable Mates: FFSD, FFTP
OTHER SOLUTIONS
APPLICATIONS CLP FTSH
OPTIONS
Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50 µ" (1.27 µm) Ni Current Rating (FTSH/CLP): 3.4 A per pin (2 pins powered) Operating Temp Range: -55 °C to +125 °C RoHS Compliant: Yes
–ES OPTION
(1.27 mm) .050"
–P OPTION
HORIZONTAL –EC OPTION
–EP OPTION
PROCESSING
Ultra-low profile option available. End Shrouds available. Call for FTS Series specifications.
Lead-Free Solderable: Yes SMT Lead Coplanarity: –MT & –DV Tail Option: (0.10 mm) .004" max (02-25) –MT & –DH Tail Option: (0.15 mm) .006" max (26-50)
–EJ OPTION
RECOGNITIONS
FTSH
–EL OPTION
–TR OPTION
LEAD STYLE
NO. PINS PER ROW
1
For complete scope of recognitions see www.samtec.com/quality
–01
FILE NO. E111594
ALSO AVAILABLE
–02
100
02
(4.78) .188 (1.27) .050
01
–EX OPTION SHOWN
(5.64) .222
Z
– ES
(2.57) .101 (15.77) .621 (3.33) .131 (5.87) .231 (6.53) .257
–EC 100
–EP –EL
(3.43) .135 (1.27) .050 01
OPTION
–EJ
–EJ OPTION SHOWN No. of positions x (1.27) .050
(0.40) .016 SQ
99
A
A
–04
= (3.81 mm) .150" Post
–05
= (4.32 mm) .170" Post (Mates with CLP–BE)
LEAD STYLE – 01 (5.08) .200
(1.27) .050
(5.84) .230 – DV
– 03
– 05 (1.27) (0.81) (2.29) .050 .032 .090 –MT (Styles –01, –02 & –04 only)
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
– 02
– 04
(2.51) .099
(2.92) .115
Note: Some sizes, styles and options are non-standard, non-returnable. Note: See SFM/TFM for positive alignment feature.
= (1.65 mm) .065" Post (Mates with CLP–D)
–DH (Styles –01, –02, –04 only)
No. of positions x (1.27) .050 + Z
02
–03
(0.81) .032
(0.51) .020 (2.29) .090
99
= (1.91 mm) .075" Post (Mates with FLE)
(5.33) .210
A
No. of positions x (1.27) .050 + Z
(MOQ Required)
• Molded Pick & Place pads • Latches • Other platings Contact Samtec.
= (3.05 mm) .120" Post (Mates with FFSD, CLP–DH)
02 thru 50
FILE NO: 090871_0_000
All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
A (3.05) .120 (1.91) .075 (1.65) .065 (3.81) .150 (4.32) .170
FTSH–112–02–L–DH FTSH–130–02–L–DV–EP
FTSH–116–02–L–DV
FTSH–110–01–F–DV
FTSH–116–03–L–DV–EP–P
FTSH SERIES
Optional guide post
(2.92 mm) .115"
Surface mount
Optional end shrouds and ejector shrouds
(1.27 mm) .050" micro pitch
PLATING OPTION
–F
TAIL OPTION
OPTION
–DV
Leave Blank for -DH & -MT
= Gold flash on post, Matte Tin on tail
= Double Vertical
–L
= Double Horizontal (Styles –01, –02 & –04 only)
= 10 µ" (0.25 µm) Gold on post, Matte Tin on tail
= Polarized Position (Specify position of omitted pin) (Not available with -EX options)
–MT
= Mixed Technology (Styles –01, –02 & –04 only)
–ES
–EL
= End Shroud
= End Shroud with Board Lock (Boards are positively locked and cannot be unmated)
–EC
= End Shroud with Locking Clip (Manual placement required)
–EP
= End Shroud with Guide Post
(1.91) .075 DIA
(3.05) .120
(3.05) .120 (1.22) .048
(4.83) .190
– EC
(0.89) .035 DIA
(2.16) .085
(5.08) .200 (11.18) .440
(3.20) .126
–EJ
–C
= (5.00 mm) .197" DIA Polyimide film Pick & Place Pad (–DH only)
–P
–A
(3.30) .130 x (5.08) .200
–K
= Pick & Place Pad (–DV 4 positions min.) (–DH & –MT not available)
(0.86) .034
–TR
(4.10) .160
(2.29) .090
–EL
–A
= Alignment Pin (–DV 3 positions min.) (–DH 5 positions min.) (Metal or plastic at Samtec discretion)
= Ejector Shroud (Style –01 only) –DH & –MT not available 10 pins/row minimum 25 pins/row maximum
–EP (1.17) .046
= Keying Shroud (For mating with FFSD Style –01 only and 05, 08, 10, 13, 17, 20 & 25 pins/row only. 13, 17, 20 & 25 pins/row only with –EJ option) (–DV only)
–EJ
(4.83) .190
–ES
–K
(Style –02 & –03 only, –DH & –MT not available) 9 pins/row minimum (Other positions available. Call Samtec.)
–“XXX”
–DH
OTHER OPTIONS
FLEX SHROUD OPTIONS
= Tape & Reel Packaging (Flex Shroud options not available except –ES & –EJ)
–P
Due to technical progress, all designs, specifications and components are subject to change without notice.
WWW.SAMTEC.COM
All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
