snowboard & ski traction amazonaws com

Report 5 Downloads 102 Views
I’M NOT A STICKER, DON’T TREAT ME LIKE ONE!

SNOWBOARD & SKI TRACTION Installation Instructions Board or Ski surface preparation / cleaning is crucial. APPLY TO A CLEAN, DRY, WARM (ROOM TEMP.) SNOW TOOL AT LEAST 30 MINUTES BEFORE USE. 1. Clean surface with alcohol and/or dishwashing detergent to remove grease, grime, & oils. 2. Cut Plastic wrap along edge of pad and remove pad from packaging. 3. Peel adhesive liner off of one corner. 4. Line up pad where you want it to go and stick down the corner. 5. Apply onto surface from one edge to the other while carefully pushing air out. 6. Stomp on it. The more pressure the better. Go ride!

Inc.

Web: www.stompgrip.com E-mail: [email protected] 15431 Chemical Ln. Huntington Beach California 92649 Toll Free: 888-612-5240 Phone: 714-894-9388 Fax: 714-894-4648