T&B Surface Raceway Nonmetallic
Nonmetallic
T&B Surface Raceway Two-Piece System – Office White The T&B Two-Piece system is designed to contain everything from THHN conductors to coaxial cable. Made of UL listed 94V-0 PVC, T&B Nonmetallic Surface Raceway is self-extinguishing and engineered to resist heat, impact, moisture, and most organic solvents. The separate base and cover permits repeated openings for easy cable modifications and additions. The T&B Nonmetallic Surface Raceway system installs in minutes with its special adhesive base and accessory fittings. For a custom look, it can be painted with a latex based paint. Note: T&B Nonmetallic Surface Raceway is CSA and UL Listed for power applications up to a full 300 volts when mechanically mounted every 18 inches with a #8 screw.
• Easy to Install • Ideal for Installations Requiring Multiple Circuits • High Performance, Low Profile • Made of Flame Resistant PVC
Cat. No.
SR100-TP SR100-TPCB* SR50-TP SR50-TPCB*
Internal Width (in.)
Internal Height (in.)
Length (ft.)
Std. Ctn.
Std. Pkg.
1.00 1.00 .50 .50
.50 .50 .25 .25
6.00 6.00 6.00 6.00
– – – –
144' 144' 120' 120'
*Special adhesive on base for mounting to cinder block or masonry applications.
One-Piece Latching Raceway – Office White T&B offers a quality, low cost, one-piece latching raceway to speed the installation of low voltage cable runs. High performance adhesive eliminates the costly drilling of holes for mechanical fasteners. The system is also CSA and UL listed for power applications up to 300V when mechanically fastened every 18 inches with a #8 screw. Engineered to form a flexible “living” hinge, the One-Piece Latching System can be opened and closed repeatedly without cracking. This system also features an innovative reinforcing arm, which assures a positive lock and prevents accidental opening on impact. The One-Piece Latching Raceway has the same low profile as the original two-piece system, and uses the same junction boxes and accessory fittings. The office white color will coordinate with any decor. The system may be painted if another color is desired.
• Fast, Easy Installation • Complete Line of Accessory Fittings • Made of High Impact PVC
Cat. No.
SR100-LD SR100-LDCB* SR50-LD SR50-LDCB*
Internal Width (in.)
Internal Height (in.)
Length (ft.)
Std. Ctn.
Std. Pkg.
1.40 1.40 .66 .66
.60 .60 .48 .48
6.00 6.00 6.00 6.00
– – – –
144' 144' 120' 120'
*Raceway with adhesive backing for masonry applications.
® ®
4
Nonmetallic
T&B Surface Raceway Accessory Fittings For One-Piece Latching Raceway and Two-Piece Nonmetallic Surface Raceway Systems T&B Accessory Fittings are designed for the finished look in your raceway installations. Fitting covers overlap raceway edges for a smooth appearance. They slide into the unique center channel of the base to provide the proper alignment around splices, corners, and tees. These connectors are one more indication of the quality engineering reflected in the T&B system.
Fittings for SR50-TP and SR50-LD Systems SR100-BA
Cat. No.
SR100-CF & SR50-CF
SR50-CF SR50-EC SR50-EL SR50-FL SR50-IL SR50-SC SR50-T SR50-WR
SR100-EC & SR50-EC
Description
Drop Ceiling Fitting End Cap: Finishes Raceway section at end of run External Corner and Connector: Dresses outside corners Flat Elbow Cover and Connector: Dresses 90° corners Internal Corner and Connector: Dresses inside corners Splice Cover and Connector: Joins two linear raceway sections for a uniform appearance Tee Cover and Connector: For perpendicular wire runs Wire Retainer: Holds wire in base before the cover is attached. (For Two-Piece System only.)
SR100-FL & SR50-FL
Std. Pkg.
10 10 10 10 10 10
200 250 200 200 200 250
10 10
200 1000
Std. Ctn.
Std. Pkg.
10 10 – 10 10 10 10 10 10
50 250 144 ft. 200 250 300 150 150 200
10
300
10 10
150 120
10
1000
Fittings for SR100-TP and SR100-LD Systems Cat. No.
SR100-EL & SR50-EL
Std. Ctn.
SR100-BA SR100-CF SR100-CT SR100-EC SR100-EL SR100-FL SR100-GC SR100-IL SR100-RC SR100-SC SR100-T SR100-TR SR100-WR
Description
Outlet Box Adapter Drop Ceiling Fitting Center Track (Partition) End Cap: Finishes Raceway section at end of run External Corner and Connector: Dresses outside corners Flat Elbow Cover and Connector: Dresses 90° corners Conduit Connector Internal Corner and Connector: Dresses inside corners Reducer Cap: Joins the 1" and 1/2" systems together for linear wire runs Splice Cover and Connector: Joins two linear raceway sections for a uniform appearance Tee Cover and Connector: For perpendicular wire runs Tee Cover with Reducer and Connector: Joins the 1" and d" Raceway Systems together for perpendicular wire runs Wire Retainer: Holds wire in base before the cover is attached. (For Two-Piece System only.)
SR100-GC & SR50-GC
SR100-IL & SR50-IL
SR100-RC & SR50-RC
SR100-SC & SR50-SC
SR100-TR & SR50-TR
SR100-T & SR50-T
SR100-WR & SR50-WR
® ®
5
Nonmetallic
T&B Surface Raceway Radius Raceway Fittings
SR100-ELF
Engineered to maintain the recommended minimum bend radius for Category 5e and fiber optic cables. These Category 5e compliant fittings exceed the industry requirement of a minimum 1 inch bend radius. The complete line of fittings provide a 1.5 inch bend radius. The radius fittings use an internal connector ensuring continuous cable protection, providing for both fast and easy installation. Designed for use with SR100-TP and SR100-LD systems only. Cat. No.
SR100-ELF
SR100-HLF
SR100-HLF SR100-ILF SR100-TCF
Description
External Elbow Base and Cover-Category 5e Compliant Flat Elbow Cover and Base–Category 5e Compliant Internal Elbow Base and Cover–Category 5e Compliant Tee Cover and Base–Category 5e Compliant
Std. Ctn.
Std. Pkg.
10
100
10 10
100 100
10
100
SR100-ILF
SR100-TCF
® ®
6
Nonmetallic
T&B Surface Raceway Junction Boxes Cat. No.
SRJB-1
SRJB-1-1/2
SRJB-1 SRJB-1 1/2 SRJB-2 SRJB-600V-1* SRJB-1R SRJB-2G-2
Description
Single Gang 3" W x 5" L x 1" D Single Gang 3" W x 5" L x 1.6" D Single Gang 3" W x 5" L x 2" D Single Gang for Power Applications 3" W x 5" L x 1" D Single Gang Round 5.78 Dia. x 1.13" D Two Gang 5"W x 5"L x 2"D
Std. Ctn.
Std. Pkg.
1 1 1 1 1 1
80 75 50 80 50 30
All Accessory Fittings are made of UL Listed 94V-0 Material. * For Power Applications up to 300V.
SRJB-2
SRJB-600V-1
SRJB-1R
SRJB-2G-2
• Concentric twist-outs for attaching to both the SR50 and SR100 raceways • Mount a variety of NEMA devices and matching office white datacom faceplates and data jacks connectors • Ideal for security and fire alarm hardware
® ®
7
Small Metallic
T&B Surface Raceway The One-Piece Surface Raceway System is an attractive, convenient and cost effective way to add outlets wherever they are needed. The ivory Surface Raceway mounts on any interior wall and offers a comprehensive choice of fittings, elbows and boxes to provide you the versatility that you need. Optional 8 foot raceway lengths can run from ceiling to receptacle height eliminating excess material. New device boxes up to 6-gang provide for the mounting of all device options. Alarm and life safety devices can now be surface mounted to matching red two-gang boxes. The B300 and B400 Series Raceways are UL classified for use with Wiremold 500, 700 and 5700 Series Fittings.
B300 Series – Shallow One-Piece Raceway f"
Cat. No.
w"
Description
5' length, individually poly-bagged. Packed 20 per carton. 8' length. Packed 12 per carton. 10' length. Packed 10 per carton.
B300-5 B300-8 B300-10
Std. Ctn.
Std. Pkg.
–
100 ft.
– –
96 ft. 100 ft.
Std. Ctn.
Std. Pkg.
–
100 ft.
– –
96 ft. 100 ft.
Std. Ctn.
Std. Pkg.
– –
50 50
–
50
5
50
5 5
50 50
• Off-white cover finish with galvanized base • .040" steel (nominal) • Furnished with one B3401 coupling per length of channel
B400 Series – Deep One-Piece Raceway Cat. No.
f"
y"
Description
5' length, individually poly-bagged. Packed 20 per carton. 8' length. Packed 12 per carton. 10' length. Packed 10 per carton.
B400-5 B400-8 B400-10
• Off-white cover finish with galvanized base • .040" steel (nominal) • Furnished with one B3401 coupling per length of channel
B300 Series – Fittings Cat. No.
B-302
B302 B304 B306 B311 B317 B318
Description
Insulated Bushing – Protects wire and cable insulation. Raceway Support Clip – Two screw holes for mounting raceway. Raceway Connection Cover – To cover the ends of raceway sections. Hides uneven cuts or rough edges. 90° Flat Elbow – For right angle turns on the same surface. Inside Elbow – For internal corners. Outside Elbow – For turns on external corner surfaces.
B-304
B-306
B-317
B-318
® ®
B-311
8
Small Metallic
T&B Surface Raceway B400 Series – Fittings Cat. No.
B-402
B402 B404 B406 B411 B417 B418
Description
Insulating Bushing–Protects wires from abrasion. Raceway Support Strap–Two screw holes for mounting raceway. Raceway Connection Cover–To cover the ends of raceway sections. Hides uneven cuts or rough edges. 90° Flat Elbow – For right angle turns on the same surface. 90° Inside Elbow – For surfaces at right angle. 90° Outside Elbow – For surfaces at right angle.
Std. Ctn.
Std. Pkg.
– –
50 50
–
50
5 5 5
50 50 50
B-404
B-406
B-411
B-417
B-418
® ®
9
Small Metallic
T&B Surface Raceway Transitional Fittings – For 300 & 400 Series Cat. No.
B3400F B-3400F
B3401 B3403
B3401
B3411-RH B3411-LH B3415 B3419 B3481 B3481A B3482 B3482A B3485
Description
Flexible Section – For getting around curved surfaces or obstructions. Coupling – Joins lengths of raceway sections. One furnished with each length of raceway. Supporting Clip – To support Raceway. Raceway is snapped into fitting, hiding the mounting screw. 90° Right Hand Twist Elbow – For 90° twist with 90° turn. 90° Left Hand Twist Elbow – For 90° twist with 90° turn. Tee Fitting. Corner Box – Splice box with d" knockout in base. Box Connector (Galvanized) – d" male. Box Connector (Galvanized) – f" male. Conduit Connector (Galvanized) – d" female. Conduit Connector (Galvanized) – f" female. Combination Connector – For connecting raceway to outlet boxes with d" knockout.
Std. Ctn.
Std. Pkg.
1
10
–
50
–
50
5 5 1 – 10 10 10 10 1
50 50 10 10 100 100 100 100 10
B3403
B3411-RH
B3419
B3481
B3411-LH
B3481A
B3482
B3415
B3482A
B3485
® ®
10
Small Metallic
T&B Surface Raceway Device Boxes – For 300 and 400 Series Cat. No.
B3436
Description
Round Blank Cover – To convert all round boxes to a blank junction box. Has d" trade size knockout to hang lightweight fixtures.
Std. Ctn.
Std. Pkg.
1
5
B3436
Open base for Mounting Device Boxes Cat. No.
Diameter
Depth
Std. Ctn.
Std. Pkg.
4f" 5d" 6c"
1" 1" 1"
1 1 1
10 10 10
Diameter
Depth
Std. Ctn.
Std. Pkg.
4f" 5d" 6c"
1" 1" 1"
1 1 1
10 10 10
B3437 B3437A B3439A
B3437
• Open base for mounting on existing in-wall conduit boxes • Covers have mounting screw centers of 2 3⁄4", 3 1⁄2" or 4 1/16"
Round Fixture Boxes Cat. No.
B3438 B3438A B3439
B3438A
• Solid base for hanging fixtures • Cover accepts any device with 2 3/4", 3 1/2" or 4 1/16" screw mounting centers • Five 1/2" trade size knockout’s and raised center section for no-bolt fixture stud
® ®
11
Small Metallic
T&B Surface Raceway Switch Box Cat. No.
B34240
Description
Furnished with 15A, 120V single pole switch. Will accommodate other commercially available single pole and 3-way single gang switches. Base has 1/2" trade size knockout.
Std. Ctn.
Std. Pkg.
1
10
Std. Ctn.
Std. Pkg.
1
10
Std. Ctn.
Std. Pkg.
1
10
B34240
Blank Utility Box Cat. No.
B34242
Description
Junction or pull box with 1/2" trade size knockout in base and cover.
B34242
Duplex Receptacle Box Cat. No.
B34243G
Description
Furnished with 15A, 120V duplex receptacle. Accepts other NEMA 5-15R or NEMA 5-20R duplex devices. Base has 1/2" trade size knockout.
B34243G
Extra Deep Switch and Receptacle Box Cat. No.
B3444 B3444-2 B3444-3
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4e" 4e"
2g" 4f" 6d"
2f" 2f" 2f"
1 1 –
5 5 1
B3444
Shallow Switch and Receptacle Box Cat. No.
B3447-C B3447-2
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4e"
2g" 4f"
1c" 1c"
1 1
10 10
® ®
12
Small Metallic
T&B Surface Raceway Switch and Receptacle Box Cat. No.
B3448
B3448-C B3448-2 B3448-3 B3448-4 B3448-5 B3448-6
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4e" 4e" 4e" 4e" 4e"
2g" 4f" 6d" 8X" 10q" 11O"
1f" 1f" 1f 1f" 1f" 1f"
1 1 1 – – –
5 10 5 1 1 1
Shallow Switch and Receptacle Box Cat. No.
B3448S
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e"
2g"
1"
1
10
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4e" 4e"
2g" 4f" 6d"
1" 1" 1"
1 1 –
10 10 5
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4W" 4W"
2g" 4W" 4W"
1a" 1c" 2f"
1 1 1
10 5 5
B3448S
Extension Adapter Box Cat. No.
B3451 B3451-2 B3451-3 B3451
To extend from existing in-wall box
Fire Alarm Box Cat. No.
B3447R B3452-2R B3453-2R B3452-2R
• For mounting of alarm and life safety devices that fit 4" square boxes • Cover has 3 twistouts on each side • Base has rectangular knockout with 1/2" and 3/4" concentric knockouts • Red finish
® ®
13
Small Metallic
T&B Surface Raceway
Installation Instructions WARNING: SYSTEM MUST BE INSTALLED BY QUALIFIED ELECTRICAL PERSONNEL IN ACCORDANCE WITH LOCAL CODES. READ THE INFORMATION BELOW CAREFULLY BEFORE PROCEEDING WITH INSTALLATION. FAILURE TO READ AND CAREFULLY FOLLOW ALL INSTRUCTIONS MAY CAUSE ELECTRICAL SHOCK OR FIRE, RESULTING IN SERIOUS BODILY INJURY OR DEATH. • Raceway should be installed in dry, indoor locations only. • Always ground entire surface raceway system.
4. INSERT BASE TONGUE UNDER RACEWAY BASE.
1 LOCATE POWER SOURCE. EXISTING OUTLET BOX
EXISTING OUTLET BOX
CO
8. PULL WIRES.
U
RACEWAY BASE TONGUE
5. INSERT BUSHING IN RACEWAY. BUSHING
9. REMOVE PROPER TWISTOUTS IN COVERS.
PROTECTS WIRES AT RACEWAY ENTRANCE
TWIST INWARD
EXISTING RACEWAY
IN-WALL OUTLET BOX
THRU-WALL CONDUIT ABUTTING
WIRES B300
6. ATTACH BASE TO SURFACE USING TWO #8 OR LARGER SCREWS.
2. LOCATE NEXT COMPONENT AND CUT RACEWAY TO LENGTH. 3/8"
DIST. BETWEEN FITTING BASES
3/8"
B400
10. MOUNT COVERS TO BASES. FOR BOXES USE SCREWS PROVIDED. FOR FITTINGS SNAP COVER IN PLACE.
RACEWAY LENGTH (INCLUDE FITTING TONGUES IN RACEWAY LENGTH) MAY HAVE TO GUIDE SCREWS INTO TAPPED HOLES.
3. MOUNT RACEWAY USING CLIPS, COUPLING, OR STRAPS AS REQUIRED.
7. USE CONNECTION COVERS TO HIDE JOINTS. ABUTTING RACEWAYS
SNAP OVER COVER
® ®
14
Large Metallic
T&B Surface Raceway T&B Metallic Surface Raceway Exceptional Quality & Finish T&B Metallic Surface Raceway is a fully CSA and UL approved two piece surface raceway system. Available in four standard sizes, T&B Metallic raceways are all manufactured from “Satincoat” pre-painted galvanized steel for maximum corrosion resistance. Four Standard Sizes The four standard sizes are available in 1, 2 or 3 compartments, ranging from 2f" wide up to 7b" wide in the case of the SR800 series raceway, the industry’s only triple compartment metal raceway. All series are provided with the same positive snap-in cover for a consistent appearance in facility installations.
• Available in 1, 2 or 3 compartments • Manufactured from “Satincoat” prepainted galvanized steel • Standard colors are Ivory and Gray • Available in Aluminum • Pre-Cut covers for less field cutting • Barriers come pre-welded • Raceway channel has positive snap in cover
Welded in Barriers T&B raceway is supplied with optional barriers pre-welded in place, eliminating the need for clips or other fastening means, and thereby greatly reducing installation time and accordingly the cost of installation. Choice of Colors Standard Colors are Ivory or Gray.
® ®
15
Large Metallic
T&B Surface Raceway SR250 Series – Two-Piece Raceway – Gray
1-1/2"
1-3/32"
Gray Cat. No.
SR250-BSE
SR250
SR250V-BSE
SR250-C5FT
Std. Pkg.
Description
Base – 10' lengths, .040" nominal thickness, prepainted galvanized steel. Cover – 5' lengths, .040" nominal thickness, galvanized steel, baked enamel finish.
100 ft. 100 ft.
SR250 Series – Two-Piece Raceway – Ivory Ivory Cat. No.
SR250V-C5FT
Base – 10' lengths, .040" nominal thickness, prepainted galvanized steel. SR250V-C5FT Cover – 5' lengths, .040" nominal thickness, galvanized steel, baked enamel finish.
4-1
100 ft.
SR250V-BSE
1-13/16"
6"
11/1
Std. Pkg.
Description
100 ft.
/2"
/2"
4-1
SR250V-AP
SR250 Series – Fittings – Gray Gray Cat. No.
Std. Pkg.
2"
Description
16"
3/4"
15/
SR250-AP
1-7/16"
SR250-C
SR250-C SR250-CV 1-3
1"
"
/16
SR250-EC SR250-EF SR250-EL
1-5/8"
SR250V-CV
5 40 40 5 5 5 5
/8"
1-1
1-1/8"
SR250-ELR
Adapter Plate – For feeding SR250 raceway from existing in wall box. Removable section of cover for feeding conductors in middle of raceway run. Plastic cover. Coupler – For connecting sections of raceway base. Cover Clip – Hides uneven seams or rough cut edges. Plastic cover. End Cap – Plastic cover finishes end of raceway run. Entrance End Feed – Feed raceway with conduit, d" trade size knockout in base. Plastic cover. External Elbow – To run raceway around outside wall. Plastic cover. Radiused External Elbow – Maintains 1d" bend radius for Category 5e and fiber optic cable around outside corner. Plastic cover.
SR250 Series – Fittings – Ivory
1-9/16"
SR250V-EC /8"
1-5
Ivory Cat. No.
2"
SR250V-AP 1-3 "
/16
SR250-C SR250V-CV
1-11/16"
SR250V-EF
1-3/16"
SR250V-EC SR250V-EF
2-3/8"
SR250V-EL 6"
1/1
1-1
SR250V-ELR
SR250V-EL
Std. Pkg.
Description
5 40 40 5 5 5 5
1-11/1
6"
"
/16
1-3
Adapter Plate – For feeding SR250 raceway from existing in wall box. Removable section of cover for feeding conductors in middle of raceway run. Plastic cover. Coupler – For connecting sections of raceway base. Cover Clip – Hides uneven seams or rough cut edges. Plastic cover. End Cap – Plastic cover finishes end of raceway run. Entrance End Feed – Feed raceway with conduit, d" trade size knockout in base. Plastic cover. External Elbow – To run raceway around outside wall. Plastic cover. Radiused External Elbow – Maintains 1d" bend radius for Category 5e and fiber optic cable around outside corner. Plastic cover.
/8"
5-3 ® ®
16
Large Metallic
T&B Surface Raceway SR250 Series – Fittings – Gray GRAY Cat. No.
Flat Elbow – For 90° turns on same surface. Plastic Cover Ground Clamp – To connect grounding conductor for supplemental raceway ground. Internal Elbow – Raceway runs on inside corner. Plastic cover. Support Clip – Mounts raceway, wired sections or cord-ended units to wall. Side Transition Fittings – To top off run of SR250 raceway to feed B300 or B400 raceway. Tee. Wire Retainer – Holds cables/wires in place in raceway base. Device Box – Twistouts on all sides of cover. Base has d" and f" trade size knockouts and rectangular knockout for mounting to existing in-wall box. (4e" L. x 2g" W. x 1f" D.) Two-Gang Device Box – Twistouts on all sides of cover. Base has d" and f" trade size knockouts and rectangular knockout for mounting to existing in-wall box. (4e" L. x 4f" W. x 1f" D.)
SR250-FL SR250-GC SR250V-FL
SR250-IL SR250-SC SR250-STF SR250-T SR250-WR SR2548
SR250V-GC
Std. Pkg.
Description
SR2548-2
5 5 5 40 5 5 40 5 5
SR250 Series – Fittings – Ivory SR250V-IL
IVORY Cat. No.
SR250V-FL SR250V-GC SR250V-IL SR250V-SC SR250V-STF SR250V-SC
Std. Pkg.
Description
SR250V-T SR250V-WR SR2548V SR2548-2V
Flat Elbow – For 90° turns on same surface. Plastic Cover. Ground Clamp – To connect grounding conductor for supplemental raceway ground. Internal Elbow – Raceway runs on inside corner. Plastic cover. Support Clip – Mounts raceway, wired sections or cord-ended units to wall. Side Transition Fittings – To top off run of SR250 raceway to feed B300 or B400 raceway. Tee. Wire Retainer – Holds cables/wires in place in raceway base. Device Box – Twistouts on all sides of cover. Base has d" and f" trade size knockouts and rectangular knockout for mounting to existing in-wall box. (4e" L. x 2g" W. x 1f" D.) Two-Gang Device Box – Twistouts on all sides of cover. Base has d" and f" trade size knockouts and rectangular knockout for mounting to existing in-wall box. (4e" L. x 4f" W. x 1f" D.)
5 5 5 40 5 5 40 5 5
SR250V-STF
SR250V-T
SR2548V
SR248-2V
SR250V-WR ® ®
17
Large Metallic
T&B Surface Raceway SR500 Series – Two-Piece Raceway – Gray
2-3/4''
GRAY Cat. No. 1-3/4''
SR500
SR500-BSE
SR500-BSE SR500-C5FT SR500-C12 SR500-C18 SR500-C24 SR500-C36
Std. Pkg.
Description
Base – 10' long, packed 5 per carton. Cover – 5' long, packed 10 per carton. Cover – 7.5" long, pre-cut to place devices 12" on-center. Cover – 13.5" long, pre-cut to place devices 18" on-center. Cover – 19.5" long, pre-cut to place devices 24" on-center. Cover – 31.5" long, pre-cut to place devices 36" on-center.
50 ft. 50 ft. 10 10 10 5
SR500 Series – Two-Piece Raceway – Ivory IVORY Cat. No.
SR500-C5FT
SR500V-BSE SR500V-C5FT SR500V-C12 SR500V-C18 SR500V-C24 SR500V-C36
Std. Pkg.
Description
Base – 10' long, packed 5 per carton. Cover – 5' long, packed 10 per carton. Cover – 7.5" long, pre-cut to place devices 12" on-center. Cover – 13.5" long, pre-cut to place devices 18" on-center. Cover – 19.5" long, pre-cut to place devices 24" on-center. Cover – 31.5" long, pre-cut to place devices 36" on-center.
50 ft. 50 ft. 10 10 10 5
® ®
18
Large Metallic
T&B Surface Raceway SR500 Series – Elbows and Fittings – Gray GRAY Cat. No.
SR500-BF
SR500-EC
Description
SR500-BF SR500-C SR500-EC SR500-EF SR500-EL SR500-EL45 SR500-FL SR500-FL45 SR500-IL SR500-IL45 SR500-PF SR500-T SR500-WR
Back Feed (1c" hole cut for wire feed). Coupling (Galvanized). End Blank. * End Feed. * 90° External Elbow – for surfaces at right angles. 45° External Elbow – for surfaces at 45° angles. 90° Flat Elbow – for right angle turns on the same surface. 45° Flat Elbow – for angled turns on the same surface. 90° Internal Elbow – for surfaces at right angles. 45° Internal Elbow – for surfaces at 45° angles. Panel Flange. Tee Fitting. Wire Retainer. (Galvanized)
Std. Ctn.
Std. Pkg.
1 10 5 1 1 1 1 1 1 1 1 1 10
20 200 100 20 20 20 20 20 20 20 20 20 200
Std. Ctn.
Std. Pkg.
1 10 1 1 1 1 1 1 1 1 1 1 10
12 200 20 20 20 20 20 20 20 20 20 20 200
SR500 Series – Elbows and Fittings – Ivory IVORY Cat. No.
SR500-EF
SR500-C
Description
SR500V-BF SR500VC SR500V-EC SR500V-EF SR500V-EL SR500V-EL45 SR500V-FL SR500V-FL45 SR500V-IL SR500V-IL45 SR500V-PF SR500V-T SR500VWR
Back Feed (1c" hole cut for wire feed). Coupling (Galvanized). End Blank. * End Feed. * 90° External Elbow – for surfaces at right angles. 45° External Elbow – for surfaces at 45° angles. 90° Flat Elbow – for right angle turns on the same surface. 45° Flat Elbow – for angled turns on the same surface. 90° Internal Elbow – for surfaces at right angles. 45° Internal Elbow – for surfaces at 45° angles. Panel Flange. Tee Fitting. Wire Retrainer (Galvanized).
*: c/w 1/2” and 3/4” concentric knockouts
SR500-EL
SR500-EL45
SR500-IL
SR500-FL
SR500-IL45
SR500-T
SR500-WR
SR500-FL45 SR500-PF ® ®
19
Large Metallic
T&B Surface Raceway SR500 Series – Face Plates – Gray GRAY Cat. No.
SR500P-D
SR500P-G
SR500P-D SR500P-G SR500P-L SR500P-S SR500P-H SR500P-T SR500P-C SR500P-B SR500P-W
Std. Pkg.
Single Duplex. Single Decora Opening (GFCI). Single Opening for commercially available face plates. Single Receptacle (1.40" dia.). Single Receptacle (1.59" dia.). Single Telephone. g" Grommeted Opening. Blank Plate. Single Switch Opening.
20 20 20 20 20 20 20 20 20
SR500 Series – Face Plates – Ivory IVORY Cat. No.
SR500P-L
Description
SR500VP-D SR500VP-G SR500VP-L SR500VP-S SR500VP-H SR500VP-T SR500VP-C SR500VP-B SR500VP-W
Description
Std. Pkg.
Single Duplex. Single Decora Opening (GFCI). Single Opening for commercially available face plates. Single Receptacle (1.40" dia.). Single Receptacle (1.59" dia.). Single Telephone. g" Grommeted Opening. Blank Plate. Single Switch Opening.
20 20 20 20 20 20 20 20 20
SR500P-S
SR500P-H
SR500P-T
SR500P-B
SR500P-C ® ®
20
Large Metallic
T&B Surface Raceway SR600 Series – Two-Piece Raceway – Gray GRAY Cat. No.
SR600B-BSE SR600-BSE SR600-C5FT SR600-C12 SR600-C18 SR600-C24 SR600-C36
Std. Pkg.
Description
Base with barrier – 10' long, packed 4 per carton Base – 10' long, packed 4 per carton Cover – 5' long, packed 8 per carton Cover – 7.5" long, pre-cut to place devices 12" on-center Cover – 13.5" long, pre-cut to place devices 18" on-center Cover – 19.5" long, precut to place devices 24" on-center Cover – 31.5" long, pre-cut to place devices 36" on-center
40 ft. 40 ft. 40 10 10 10 05
SR600VB-BSE
SR600 Series – Two-Piece Raceway – Ivory IVORY Cat. No.
SR600V-BSE
SR600VB-BSE SR600V-BSE SR600V-C5FT SR600V-C12 SR600V-C18 SR600V-C24 SR600V-C36
Std. Pkg.
Description
Base with barrier – 10' long, packed 4 per carton Base – 10' long, packed 4 per carton Cover – 5' long, packed 8 per carton Cover – 7.5" long, pre-cut to place devices 12" on-center Cover – 13.5" long, pre-cut to place devices 18" on-center Cover – 19.5" long, precut to place devices 24" on-center Cover – 31.5" long, pre-cut to place devices 36" on-center
40 ft. 40 ft. 40 ft. 10 10 10 05
SR600V-C5FT
® ®
21
Large Metallic
T&B Surface Raceway SR600B Series – Elbows with Barriers – Gray
4-1/4
GRAY Cat. No.
SR600B-EL SR600B-EL45 SR600VB-EL
SR600B-FL SR600B-FL45
3-1/4
SR600B-IL SR600B-IL45 2-1/2
SR600B-T
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Divided Tee Fitting with internal crossovers and barriers to separate services
Std. Pkg.
20 20 20 20 20 20 20
SR600VB-EL45
SR600B Series – Elbows with Barriers – Ivory 7-1/4
IVORY Cat. No.
SR600VB-EL SR600VB-EL45 SR600VB-FL
SR600VB-FL
SR600VB-FL45 SR600VB-IL
2-1/2
SR600VB-IL45 4-1/2
SR600VB-T SR600VB-FL45
GRAY Cat. No.
SR600-EL SR600-EL45 SR600-FL SR600VB-IL
SR600-FL45 SR600-IL 3-1/4
SR600-IL45 SR600-T
20 20 20 20 20 20 20
IVORY Cat. No.
SR600VB-IL45
SR600V-EL 7-1/4
SR600V-EL45 SR600V-FL SR600V-FL45
9-3/4
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee Fitting
Std. Pkg.
20 20 20 20 20 20 20
SR600 Series – Elbows – Ivory
2-1/2
SR600V-IL SR600V-IL45
® ®
SR600V-T
22
90° External Elbow For surfaces at right angle 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Divided Tee with internal crossovers and barriers to separate services
Std. Pkg.
SR600 Series – Elbows – Gray 4-1/4
SR600VB-T
Description
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angle 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee Fitting
Std. Pkg.
20. 20 20 20 20 20 20
Large Metallic
T&B Surface Raceway SR600 Series – Fittings – Gray GRAY Cat. No.
SR600V-BF
SR600-BF SR600-C SR600-EC SR600-EF SR600-PF SR600-WR
Description
Std. Ctn.
Std. Pkg.
Back Feed (13⁄8'' hole cut to feed wire) Coupling (Galvanized) End Blank * End Feed * Panel Flange Wire Retainer
1 10 5 1 1 5
20 200 100 20 20 100
Description
Std. Ctn.
Std. Pkg.
Back Feed (13⁄8'' hole cut to feed wire) Coupling (Galvanized) End Blank * End Feed * Panel Flange Wire Retainer
1 10 5 1 1 5
20 200 100 20 20 100
SR600 Series - Fittings - Ivory SR600-C
IVORY Cat. No.
SR600V-BF SR600-C SR600V-EC SR600V-EF SR600V-PF SR600-WR
*: c/w 1/2” and 3/4” concentric knockouts SR600V-EC
SR600V-EF
SR600V-PF
SR600-WR
® ®
23
Large Metallic
T&B Surface Raceway Standard Device Plates for Metallic Surface Raceway – Gray GRAY Cat. No.
SR600VP-D
SR600P-D SR600P-DC SR600P-DD SR600P-DT SR600P-DTT SR600P-G SR600P-GG SR600P-SC SR600P-HC SR600P-L
SR600VP-DC
SR600P-LL SR600P-C SR600P-B
Std. Pkg.
Description
Single Duplex Combination Duplex and g" Grommeted Opening Double Duplex Single Duplex with Single Telephone Opening Single Duplex with Two Modular Jack Openings Single Decora Opening (GFCI) Double Decora Opening (GFCI) Combination Single Receptacle (1.40 dia.) and g" Grommeted Opening Combination Single Receptacle (1.59 dia.) and g" Grommeted Opening Single Opening for Commercially Available Face Plates Double Opening for Commercially Available Face Plates Single g" Grommeted Opening Blank Plate for 600P Series
20 20 20 20 20 20 20 20 20 20 20 20 20
NOTE: 600P Series device plates used for SR600B, SR600, SR700B and SR700 series raceways.
Standard Device Plates for Metallic Surface Raceway – Ivory SR600VP-DD
SR600VP-DT
IVORY Cat. No.
SR600VP-D SR600VP-DC SR600VP-DD SR600VP-DT SR600VP-DTT SR600VP-G SR600VP-GG SR600VP-SC SR600VP-HC SR600VP-L SR600VP-LL SR600VP-GD SR600VP-C SR600VP-B
SR600VP-DTT
SR600VP-G
SR600VP-GG
Std. Pkg.
Description
Single Duplex Combination Duplex and g" Grommeted Opening Double Duplex Single Duplex with Single Telephone Opening Single Duplex with Two Modular Jack Openings Single Decora Opening (GFCI) Double Decora Opening (GFCI) Combination Single Receptacle (1.40 dia.) and g" Grommeted Opening Combination Single Receptacle (1.59 dia.) and g" Grommeted Opening Single Opening for Commercially Available Face Plates Double Opening for Commercially Available Face Plates Single Duplex with Single Decora opening (GFCI) Single g" Grommeted Opening Blank Plate for 600P Series
20 20 20 20 20 20 20 20 20 20 20 ? 20 20
NOTE: 600P Series device plates used for SR600B, SR600, SR700B and SR700 series raceways.
SR600VP-SC
SR600VP-HC
SR600VP-L
SR600VP-C
SR600VP-LL
SR600VP-B
® ®
24
Large Metallic
T&B Surface Raceway SR700 Series Raceway The extra large capacity of the SR700 series is the popular choice for locations with heavy concentration of power and communication wiring. Underfloor distribution for computer rooms, overhead cable conveyance for factory lighting or for electrical distribution to manufacturing equipment – the right choice is the SR700 raceway. In subtly attractive gray or ivory finish, the SR700 utilizes the same raceway cover and device mounting plates as the SR600 lower profile raceway.
SR700 Series – Two-Piece Raceway – Gray GRAY Cat. No.
SR700B-BSE SR700-BSE SR700B-BSE
SR600-C5FT SR600-C12 SR600-C18 SR600-C24 SR600-C36
SR700-BSE
Std. Pkg.
Description
Base with barrier – 10' Long Packed 2 per Carton Base – 10' Long Packed 2 per Carton Cover - 5' Long Packed 8 per Carton Cover - 7.5'' Long Pre-Cut to place Devices 12'' on center Cover - 13.5'' Long Pre-Cut to place Devices 18'' on-center Cover - 19.5'' Long Pre-Cut to place Devices 24'' on-center Cover - 31.5'' Long Pre-Cut to place Devices 36'' on-center
20 ft. 20 ft. 40 ft. 10 10 10 05
SR700 Series – Two-Piece Raceway – Ivory IVORY Cat. No.
SR700VB-BSE SR600V-C5FT
SR700V-BSE SR600V-C5FT SR600V-C12 SR600V-C18 SR600V-C24 SR600V-C36
Std. Pkg.
Description
Base with barrier – 10' Long Packed 2 per Carton Base – 10' Long Packed 2 per Carton Cover - 5' Long Packed 8 per Carton Cover - 7.5'' Long Pre-Cut to place Devices 12'' on center Cover - 13.5'' Long Pre-Cut to place Devices 18'' on-center Cover - 19.5'' Long Pre-Cut to place Devices 24'' on-center Cover - 31.5'' Long Pre-Cut to place Devices 36'' on-center
20 ft. 20 ft. 40 ft. 10. 10 10 05
® ®
25
Large Metallic
T&B Surface Raceway SR700 Series – Directional Fittings – Gray
6-1/8
GRAY Cat. No.
SR700-EL SR700B-EL SR700-EL45
SR700-EL
SR700-FL
4
SR700B-FL SR700-FL45 2-1/2
SR700-IL
SR700-EL45
SR700B-IL SR700-IL45 7-1/4
SR700-FL
SR700-T SR700B-T
Std. Pkg.
Description
90° External Elbow For outside corners 90° External Elbow with barrier For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 90° Flat Elbow with barrier For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow To make inside corners turn 90° Internal Elbow with barrier For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee Divided Tee
20 20 20 20 20 20 20 20 20 20 20
SR700 Series – Directional Fittings – Ivory IVORY Cat. No.
2-1/2
4-1/2
SR700V-EL SR700VB-EL SR700V-EL45
SR700-FL45
SR700V-FL 6-1/8
SR700VB-FL SR700V-FL45 SR700V-IL SR700-IL
SR700VB-IL SR700V-IL45
4
SR700V-T SR700VB-T
Std. Pkg.
Description
External Elbow To continue raceway run around external corner 90° External Elbow with barrier Turns on outside corner 45° External Elbow For surfaces at 45° angles Flat Elbow 90° turn on flat surface 90° Flat Elbow with barrier For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface Internal Elbow For inside corner turns 90° Internal Elbow with barrier For raceway turns on inside corner 45° Internal Elbow For surfaces at 45° angle Tee Divided Tee
20 20 20 20 20 20 20 20 20 20 20
NOTE: SR700B-T and SR700VB-T are supplied with internal crossovers and barriers to maintain separation of services.
2-1/2
SR700-IL45
7-1/4
9-3/4
SR700-T
® ®
26
Large Metallic
T&B Surface Raceway SR700 Series – Fittings – Gray GRAY Cat. No.
SR700-C
SR700-C SR700-BF SR700-EC SR700-EF SR700-PF SR700-WR
Description
Coupling (Galvanized) Back Feed (1c'' grommeted hole cuts to feed wire) End Blank * End Feed * Panel Flange Wire Retainer
Std. Ctn.
Std. Pkg.
5 1 5 1 1 10
50 10 100 20 10 100
Std. Ctn.
Std. Pkg.
5 1 5 1 1
50 12 100 20 20
SR700 Series – Fittings – Ivory IVORY Cat. No.
Description
SR700-BF
SR700VC SR700V-BF SR700V-EC SR700V-EF SR700V-PF
Coupling (Galvanized) Back Feed (1c'' grommeted hole cuts to feed wire) End Blank * End Feed * Panel Flange
*: c/w 1/2” and 3/4” concentric knockouts SR700-EC
SR700-EF
SR700-PF
SR700-WR
® ®
27
Large Metallic
T&B Surface Raceway Standard Device Plates for Metallic Surface Raceway – Gray GRAY Cat. No.
SR600VP-D
SR600P-D SR600P-DC SR600P-DD SR600P-DT SR600P-DTT SR600P-G SR600P-GG SR600P-SC SR600P-HC SR600P-L
SR600VP-DC
SR600P-LL SR600P-C SR600P-B
Std. Pkg.
Description
Single Duplex Combination Duplex and g" Grommeted Opening Double Duplex Single Duplex with Single Telephone Opening Single Duplex with Two Modular Jack Openings Single Decora Opening (GFCI) Double Decora Opening (GFCI) Combination Single Recep (1.40 dia.) and g" Grommeted Opening Combination Single Recep (1.59 dia.) and g" Grommeted Opening Single Opening for Commercially Available Face Plates Double Opening for Commercially Available Face Plates Single g" Grommeted Opening Blank Plate for 600P Series
20 20 20 20 20 20 20 20 20 20 20 20 20
NOTE: 600P Series device plates used for SR600B, SR600, SR700B and SR700 series raceways.
Standard Device Plates for Metallic Surface Raceway – Ivory SR600VP-DD
SR600VP-DT
IVORY Cat. No.
SR600VP-D SR600VP-DC SR600VP-DD SR600VP-DT SR600VP-DTT SR600VP-G SR600VP-GG SR600VP-SC SR600VP-HC SR600VP-L SR600VP-LL SR600VP-C SR600VP-B
SR600VP-DTT
Std. Pkg.
Description
Single Duplex Combination Duplex and g" Grommeted Opening Double Duplex Single Duplex with Single Telephone Opening Single Duplex with Two Modular Jack Openings Single Decora Opening (GFCI) Double Decora Opening (GFCI) Combination Single Recep (1.40 dia.) and g" Grommeted Opening Combination Single Recep (1.59 dia.) and g" Grommeted Opening Single Opening for Commercially Available Face Plates Double Opening for Commercially Available Face Plates Single g" Grommeted Opening Blank Plate for 600P Series
20 20 20 20 20 20 20 20 20 20 20 20 20
NOTE: 600P Series device plates used for SR600B, SR600, SR700B and SR700 series raceways.
SR600VP-G
SR600VP-SC
SR600VP-L
SR600VP-C
SR600VP-GG
SR600VP-HC
SR600VP-LL
SR600VP-B
® ®
28
Large Metallic
T&B Surface Raceway SR800 Series Raceway The SR800 series is the industry’s only triple compartment steel surface raceway. Used to separate power, voice and data cabling or to segregate “clean” from “dirty” power circuits for those specialized applications.
SR800 Series – Two-Piece Raceway – Gray GRAY Cat. No.
SR800-BSE SR800-C5FT SR800-C12 SR800-C18 SR800-C24 SR800-C36
Std. Pkg.
Description
Base - 10' Long Packed 2 per Carton Cover - 5' Long Packed 4 per Carton Cover - 7.5'' Long Pre-Cut to place Devices 12'' on center Cover - 13.5'' Long Pre-Cut to Place Devices 18'' on-center Cover - 19.5'' Long Pre-Cut to place Devices 24'' on-center Cover - 31.5'' Long Pre-Cut to place Devices 36'' on-center
20 ft. 20 ft. 10 10 10 05
SR800 Series – Two-Piece Raceway – Ivory IVORY Cat. No.
SR800V-BSE SR800V-C5FT SR800V-C12 SR800V-C18 SR800V-C24 SR800V-C36
Std. Pkg.
Description
Base - 10' Long Packed 2 per Carton Cover - 5' Long Packed 4 per Carton Cover - 7.5'' Long Pre-Cut to place Devices 12'' on center Cover - 13.5'' Long Pre-Cut to Place Devices 18'' on-center Cover - 19.5'' Long Pre-Cut to place Devices 24'' on-center Cover - 31.5'' Long Pre-Cut to place Devices 36'' on-center
20 ft. 20 ft. 10 10 10 05
® ®
29
Large Metallic
T&B Surface Raceway SR800 Series – Elbows and Tees – Gray
9-3/4
GRAY Cat. No.
SR800-EL SR800-EL45 SR800-FL
SR800-FL SR800-FL45
3-1/4
SR800-IL SR800-IL45 2-1/2
SR800-T
Std. Pkg.
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee
20 20 20 20 20 20 12
SR800-IL
SR800 Series – Elbows and Tees – Ivory
4-1/4
IVORY Cat. No.
SR800V-EL SR800V-EL45
2-1/2
SR800-EL
SR800V-FL SR800V-FL45 2-1/2
SR800V-IL 5-1/2
SR800V-IL45 SR800V-T SR800-FL45
Std. Pkg.
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee
20 20 20 20 20 20 20
NOTE: SR800-T and SR800V-T are supplied with internal crossovers and barriers to maintain separation of services.
3-1/4
2-1/2
SR800-IL45
3-1/4
2-1/2
SR800-EL45
4-1/2
12-1/4 ® ®
SR800-T
30
Large Metallic
T&B Surface Raceway SR800 Series – Fittings – Gray
SR800-C
GRAY Cat. No.
Description
Std. Ctn.
Std. Pkg.
SR800-BF SR800-C SR800-EC SR800-EF SR800-PF SR800-WR
Back Feed (13⁄8'' hole cut for feed wire) Coupling (Galvanized) End Blank * End Feed * Panel Flange Wire Retainer
1 5 5 1 1 10
12 100 100 20 12 200
Description
Std. Ctn.
Std. Pkg.
Back Feed (13⁄8'' hole cut for feed wire) Coupling (Galvanized) End Blank * End Feed * Panel Flange Wire Retainer
1 5 5 1 10 10
12 100 100 20 200 200
SR800 Series – Fittings – Ivory SR800-BF
IVORY Cat. No.
SR800V-BF SR800VC SR800V-EC SR800V-EF SR800V-PF SR800-WR
*: c/w 1/2” and 3/4” concentric knockouts SR800-EC
SR800-PF
SR800-EF
SR800-WR
® ®
31
Large Metallic
T&B Surface Raceway Standard Device Plates for Metallic Surface Raceway – Gray GRAY Cat. No.
SR800P-DDD
SR800P-DTD
SR800P-DDD SR800P-DTD SR800P-GGG SR800P-GTG
Description
Std. Pkg.
Triple Duplex Double Duplex with Single Telephone Opening Triple Decora (GFCI) Double Decora with Single Telephone Opening
20 20 20 20
Standard Device Plates for Metallic Surface Raceway – Ivory IVORY Cat. No. SR800P-GGG
SR800P-GTG
SR800VP-DDD SR800VP-DTD SR800VP-GGG SR800VP-GTG
Description
Std. Pkg.
Triple Duplex Double Duplex with Single Telephone Opening Triple Decora (GFCI) Double Decora with Single Telephone Opening
20 20 20 20
® ®
32
T&B Surface Raceway Two-Piece System – Office White The T&B Two-Piece system is designed to contain everything from THHN conductors to coaxial cable. Made of UL listed 94V-0 PVC, T&B Nonmetallic Surface Raceway is self-extinguishing and engineered to resist heat, impact, moisture, and most organic solvents. The separate base and cover permits repeated openings for easy cable modifications and additions. The T&B Nonmetallic Surface Raceway system installs in minutes with its special adhesive base and accessory fittings. For a custom look, it can be painted with a latex based paint. Note: T&B Nonmetallic Surface Raceway is CSA and UL Listed for power applications up to a full 300 volts when mechanically mounted every 18 inches with a #8 screw.
• Easy to Install • Ideal for Installations Requiring Multiple Circuits • High Performance, Low Profile • Made of Flame Resistant PVC
Cat. No.
SR100-TP SR100-TPCB* SR50-TP SR50-TPCB*
Internal Width (in.)
Internal Height (in.)
Length (ft.)
Std. Ctn.
Std. Pkg.
1.00 1.00 .50 .50
.50 .50 .25 .25
6.00 6.00 6.00 6.00
– – – –
144' 144' 120' 120'
*Special adhesive on base for mounting to cinder block or masonry applications.
One-Piece Latching Raceway – Office White T&B offers a quality, low cost, one-piece latching raceway to speed the installation of low voltage cable runs. High performance adhesive eliminates the costly drilling of holes for mechanical fasteners. The system is also CSA and UL listed for power applications up to 300V when mechanically fastened every 18 inches with a #8 screw. Engineered to form a flexible “living” hinge, the One-Piece Latching System can be opened and closed repeatedly without cracking. This system also features an innovative reinforcing arm, which assures a positive lock and prevents accidental opening on impact. The One-Piece Latching Raceway has the same low profile as the original two-piece system, and uses the same junction boxes and accessory fittings. The office white color will coordinate with any decor. The system may be painted if another color is desired.
• Fast, Easy Installation • Complete Line of Accessory Fittings • Made of High Impact PVC
Cat. No.
SR100-LD SR100-LDCB* SR50-LD SR50-LDCB*
Internal Width (in.)
Internal Height (in.)
Length (ft.)
Std. Ctn.
Std. Pkg.
1.40 1.40 .66 .66
.60 .60 .48 .48
6.00 6.00 6.00 6.00
– – – –
144' 144' 120' 120'
*Raceway with adhesive backing for masonry applications.
® ®
4
Nonmetallic
T&B Surface Raceway Accessory Fittings For One-Piece Latching Raceway and Two-Piece Nonmetallic Surface Raceway Systems T&B Accessory Fittings are designed for the finished look in your raceway installations. Fitting covers overlap raceway edges for a smooth appearance. They slide into the unique center channel of the base to provide the proper alignment around splices, corners, and tees. These connectors are one more indication of the quality engineering reflected in the T&B system.
Fittings for SR50-TP and SR50-LD Systems SR100-BA
Cat. No.
SR100-CF & SR50-CF
SR50-CF SR50-EC SR50-EL SR50-FL SR50-IL SR50-SC SR50-T SR50-WR
SR100-EC & SR50-EC
Description
Drop Ceiling Fitting End Cap: Finishes Raceway section at end of run External Corner and Connector: Dresses outside corners Flat Elbow Cover and Connector: Dresses 90° corners Internal Corner and Connector: Dresses inside corners Splice Cover and Connector: Joins two linear raceway sections for a uniform appearance Tee Cover and Connector: For perpendicular wire runs Wire Retainer: Holds wire in base before the cover is attached. (For Two-Piece System only.)
SR100-FL & SR50-FL
Std. Pkg.
10 10 10 10 10 10
200 250 200 200 200 250
10 10
200 1000
Std. Ctn.
Std. Pkg.
10 10 – 10 10 10 10 10 10
50 250 144 ft. 200 250 300 150 150 200
10
300
10 10
150 120
10
1000
Fittings for SR100-TP and SR100-LD Systems Cat. No.
SR100-EL & SR50-EL
Std. Ctn.
SR100-BA SR100-CF SR100-CT SR100-EC SR100-EL SR100-FL SR100-GC SR100-IL SR100-RC SR100-SC SR100-T SR100-TR SR100-WR
Description
Outlet Box Adapter Drop Ceiling Fitting Center Track (Partition) End Cap: Finishes Raceway section at end of run External Corner and Connector: Dresses outside corners Flat Elbow Cover and Connector: Dresses 90° corners Conduit Connector Internal Corner and Connector: Dresses inside corners Reducer Cap: Joins the 1" and 1/2" systems together for linear wire runs Splice Cover and Connector: Joins two linear raceway sections for a uniform appearance Tee Cover and Connector: For perpendicular wire runs Tee Cover with Reducer and Connector: Joins the 1" and d" Raceway Systems together for perpendicular wire runs Wire Retainer: Holds wire in base before the cover is attached. (For Two-Piece System only.)
SR100-GC & SR50-GC
SR100-IL & SR50-IL
SR100-RC & SR50-RC
SR100-SC & SR50-SC
SR100-TR & SR50-TR
SR100-T & SR50-T
SR100-WR & SR50-WR
® ®
5
Nonmetallic
T&B Surface Raceway Radius Raceway Fittings
SR100-ELF
Engineered to maintain the recommended minimum bend radius for Category 5e and fiber optic cables. These Category 5e compliant fittings exceed the industry requirement of a minimum 1 inch bend radius. The complete line of fittings provide a 1.5 inch bend radius. The radius fittings use an internal connector ensuring continuous cable protection, providing for both fast and easy installation. Designed for use with SR100-TP and SR100-LD systems only. Cat. No.
SR100-ELF
SR100-HLF
SR100-HLF SR100-ILF SR100-TCF
Description
External Elbow Base and Cover-Category 5e Compliant Flat Elbow Cover and Base–Category 5e Compliant Internal Elbow Base and Cover–Category 5e Compliant Tee Cover and Base–Category 5e Compliant
Std. Ctn.
Std. Pkg.
10
100
10 10
100 100
10
100
SR100-ILF
SR100-TCF
® ®
6
Nonmetallic
T&B Surface Raceway Junction Boxes Cat. No.
SRJB-1
SRJB-1-1/2
SRJB-1 SRJB-1 1/2 SRJB-2 SRJB-600V-1* SRJB-1R SRJB-2G-2
Description
Single Gang 3" W x 5" L x 1" D Single Gang 3" W x 5" L x 1.6" D Single Gang 3" W x 5" L x 2" D Single Gang for Power Applications 3" W x 5" L x 1" D Single Gang Round 5.78 Dia. x 1.13" D Two Gang 5"W x 5"L x 2"D
Std. Ctn.
Std. Pkg.
1 1 1 1 1 1
80 75 50 80 50 30
All Accessory Fittings are made of UL Listed 94V-0 Material. * For Power Applications up to 300V.
SRJB-2
SRJB-600V-1
SRJB-1R
SRJB-2G-2
• Concentric twist-outs for attaching to both the SR50 and SR100 raceways • Mount a variety of NEMA devices and matching office white datacom faceplates and data jacks connectors • Ideal for security and fire alarm hardware
® ®
7
Small Metallic
T&B Surface Raceway The One-Piece Surface Raceway System is an attractive, convenient and cost effective way to add outlets wherever they are needed. The ivory Surface Raceway mounts on any interior wall and offers a comprehensive choice of fittings, elbows and boxes to provide you the versatility that you need. Optional 8 foot raceway lengths can run from ceiling to receptacle height eliminating excess material. New device boxes up to 6-gang provide for the mounting of all device options. Alarm and life safety devices can now be surface mounted to matching red two-gang boxes. The B300 and B400 Series Raceways are UL classified for use with Wiremold 500, 700 and 5700 Series Fittings.
B300 Series – Shallow One-Piece Raceway f"
Cat. No.
w"
Description
5' length, individually poly-bagged. Packed 20 per carton. 8' length. Packed 12 per carton. 10' length. Packed 10 per carton.
B300-5 B300-8 B300-10
Std. Ctn.
Std. Pkg.
–
100 ft.
– –
96 ft. 100 ft.
Std. Ctn.
Std. Pkg.
–
100 ft.
– –
96 ft. 100 ft.
Std. Ctn.
Std. Pkg.
– –
50 50
–
50
5
50
5 5
50 50
• Off-white cover finish with galvanized base • .040" steel (nominal) • Furnished with one B3401 coupling per length of channel
B400 Series – Deep One-Piece Raceway Cat. No.
f"
y"
Description
5' length, individually poly-bagged. Packed 20 per carton. 8' length. Packed 12 per carton. 10' length. Packed 10 per carton.
B400-5 B400-8 B400-10
• Off-white cover finish with galvanized base • .040" steel (nominal) • Furnished with one B3401 coupling per length of channel
B300 Series – Fittings Cat. No.
B-302
B302 B304 B306 B311 B317 B318
Description
Insulated Bushing – Protects wire and cable insulation. Raceway Support Clip – Two screw holes for mounting raceway. Raceway Connection Cover – To cover the ends of raceway sections. Hides uneven cuts or rough edges. 90° Flat Elbow – For right angle turns on the same surface. Inside Elbow – For internal corners. Outside Elbow – For turns on external corner surfaces.
B-304
B-306
B-317
B-318
® ®
B-311
8
Small Metallic
T&B Surface Raceway B400 Series – Fittings Cat. No.
B-402
B402 B404 B406 B411 B417 B418
Description
Insulating Bushing–Protects wires from abrasion. Raceway Support Strap–Two screw holes for mounting raceway. Raceway Connection Cover–To cover the ends of raceway sections. Hides uneven cuts or rough edges. 90° Flat Elbow – For right angle turns on the same surface. 90° Inside Elbow – For surfaces at right angle. 90° Outside Elbow – For surfaces at right angle.
Std. Ctn.
Std. Pkg.
– –
50 50
–
50
5 5 5
50 50 50
B-404
B-406
B-411
B-417
B-418
® ®
9
Small Metallic
T&B Surface Raceway Transitional Fittings – For 300 & 400 Series Cat. No.
B3400F B-3400F
B3401 B3403
B3401
B3411-RH B3411-LH B3415 B3419 B3481 B3481A B3482 B3482A B3485
Description
Flexible Section – For getting around curved surfaces or obstructions. Coupling – Joins lengths of raceway sections. One furnished with each length of raceway. Supporting Clip – To support Raceway. Raceway is snapped into fitting, hiding the mounting screw. 90° Right Hand Twist Elbow – For 90° twist with 90° turn. 90° Left Hand Twist Elbow – For 90° twist with 90° turn. Tee Fitting. Corner Box – Splice box with d" knockout in base. Box Connector (Galvanized) – d" male. Box Connector (Galvanized) – f" male. Conduit Connector (Galvanized) – d" female. Conduit Connector (Galvanized) – f" female. Combination Connector – For connecting raceway to outlet boxes with d" knockout.
Std. Ctn.
Std. Pkg.
1
10
–
50
–
50
5 5 1 – 10 10 10 10 1
50 50 10 10 100 100 100 100 10
B3403
B3411-RH
B3419
B3481
B3411-LH
B3481A
B3482
B3415
B3482A
B3485
® ®
10
Small Metallic
T&B Surface Raceway Device Boxes – For 300 and 400 Series Cat. No.
B3436
Description
Round Blank Cover – To convert all round boxes to a blank junction box. Has d" trade size knockout to hang lightweight fixtures.
Std. Ctn.
Std. Pkg.
1
5
B3436
Open base for Mounting Device Boxes Cat. No.
Diameter
Depth
Std. Ctn.
Std. Pkg.
4f" 5d" 6c"
1" 1" 1"
1 1 1
10 10 10
Diameter
Depth
Std. Ctn.
Std. Pkg.
4f" 5d" 6c"
1" 1" 1"
1 1 1
10 10 10
B3437 B3437A B3439A
B3437
• Open base for mounting on existing in-wall conduit boxes • Covers have mounting screw centers of 2 3⁄4", 3 1⁄2" or 4 1/16"
Round Fixture Boxes Cat. No.
B3438 B3438A B3439
B3438A
• Solid base for hanging fixtures • Cover accepts any device with 2 3/4", 3 1/2" or 4 1/16" screw mounting centers • Five 1/2" trade size knockout’s and raised center section for no-bolt fixture stud
® ®
11
Small Metallic
T&B Surface Raceway Switch Box Cat. No.
B34240
Description
Furnished with 15A, 120V single pole switch. Will accommodate other commercially available single pole and 3-way single gang switches. Base has 1/2" trade size knockout.
Std. Ctn.
Std. Pkg.
1
10
Std. Ctn.
Std. Pkg.
1
10
Std. Ctn.
Std. Pkg.
1
10
B34240
Blank Utility Box Cat. No.
B34242
Description
Junction or pull box with 1/2" trade size knockout in base and cover.
B34242
Duplex Receptacle Box Cat. No.
B34243G
Description
Furnished with 15A, 120V duplex receptacle. Accepts other NEMA 5-15R or NEMA 5-20R duplex devices. Base has 1/2" trade size knockout.
B34243G
Extra Deep Switch and Receptacle Box Cat. No.
B3444 B3444-2 B3444-3
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4e" 4e"
2g" 4f" 6d"
2f" 2f" 2f"
1 1 –
5 5 1
B3444
Shallow Switch and Receptacle Box Cat. No.
B3447-C B3447-2
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4e"
2g" 4f"
1c" 1c"
1 1
10 10
® ®
12
Small Metallic
T&B Surface Raceway Switch and Receptacle Box Cat. No.
B3448
B3448-C B3448-2 B3448-3 B3448-4 B3448-5 B3448-6
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4e" 4e" 4e" 4e" 4e"
2g" 4f" 6d" 8X" 10q" 11O"
1f" 1f" 1f 1f" 1f" 1f"
1 1 1 – – –
5 10 5 1 1 1
Shallow Switch and Receptacle Box Cat. No.
B3448S
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e"
2g"
1"
1
10
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4e" 4e"
2g" 4f" 6d"
1" 1" 1"
1 1 –
10 10 5
Length
Width
Depth
Std. Ctn.
Std. Pkg.
4e" 4W" 4W"
2g" 4W" 4W"
1a" 1c" 2f"
1 1 1
10 5 5
B3448S
Extension Adapter Box Cat. No.
B3451 B3451-2 B3451-3 B3451
To extend from existing in-wall box
Fire Alarm Box Cat. No.
B3447R B3452-2R B3453-2R B3452-2R
• For mounting of alarm and life safety devices that fit 4" square boxes • Cover has 3 twistouts on each side • Base has rectangular knockout with 1/2" and 3/4" concentric knockouts • Red finish
® ®
13
Small Metallic
T&B Surface Raceway
Installation Instructions WARNING: SYSTEM MUST BE INSTALLED BY QUALIFIED ELECTRICAL PERSONNEL IN ACCORDANCE WITH LOCAL CODES. READ THE INFORMATION BELOW CAREFULLY BEFORE PROCEEDING WITH INSTALLATION. FAILURE TO READ AND CAREFULLY FOLLOW ALL INSTRUCTIONS MAY CAUSE ELECTRICAL SHOCK OR FIRE, RESULTING IN SERIOUS BODILY INJURY OR DEATH. • Raceway should be installed in dry, indoor locations only. • Always ground entire surface raceway system.
4. INSERT BASE TONGUE UNDER RACEWAY BASE.
1 LOCATE POWER SOURCE. EXISTING OUTLET BOX
EXISTING OUTLET BOX
CO
8. PULL WIRES.
U
RACEWAY BASE TONGUE
5. INSERT BUSHING IN RACEWAY. BUSHING
9. REMOVE PROPER TWISTOUTS IN COVERS.
PROTECTS WIRES AT RACEWAY ENTRANCE
TWIST INWARD
EXISTING RACEWAY
IN-WALL OUTLET BOX
THRU-WALL CONDUIT ABUTTING
WIRES B300
6. ATTACH BASE TO SURFACE USING TWO #8 OR LARGER SCREWS.
2. LOCATE NEXT COMPONENT AND CUT RACEWAY TO LENGTH. 3/8"
DIST. BETWEEN FITTING BASES
3/8"
B400
10. MOUNT COVERS TO BASES. FOR BOXES USE SCREWS PROVIDED. FOR FITTINGS SNAP COVER IN PLACE.
RACEWAY LENGTH (INCLUDE FITTING TONGUES IN RACEWAY LENGTH) MAY HAVE TO GUIDE SCREWS INTO TAPPED HOLES.
3. MOUNT RACEWAY USING CLIPS, COUPLING, OR STRAPS AS REQUIRED.
7. USE CONNECTION COVERS TO HIDE JOINTS. ABUTTING RACEWAYS
SNAP OVER COVER
® ®
14
Large Metallic
T&B Surface Raceway T&B Metallic Surface Raceway Exceptional Quality & Finish T&B Metallic Surface Raceway is a fully CSA and UL approved two piece surface raceway system. Available in four standard sizes, T&B Metallic raceways are all manufactured from “Satincoat” pre-painted galvanized steel for maximum corrosion resistance. Four Standard Sizes The four standard sizes are available in 1, 2 or 3 compartments, ranging from 2f" wide up to 7b" wide in the case of the SR800 series raceway, the industry’s only triple compartment metal raceway. All series are provided with the same positive snap-in cover for a consistent appearance in facility installations.
• Available in 1, 2 or 3 compartments • Manufactured from “Satincoat” prepainted galvanized steel • Standard colors are Ivory and Gray • Available in Aluminum • Pre-Cut covers for less field cutting • Barriers come pre-welded • Raceway channel has positive snap in cover
Welded in Barriers T&B raceway is supplied with optional barriers pre-welded in place, eliminating the need for clips or other fastening means, and thereby greatly reducing installation time and accordingly the cost of installation. Choice of Colors Standard Colors are Ivory or Gray.
® ®
15
Large Metallic
T&B Surface Raceway SR250 Series – Two-Piece Raceway – Gray
1-1/2"
1-3/32"
Gray Cat. No.
SR250-BSE
SR250
SR250V-BSE
SR250-C5FT
Std. Pkg.
Description
Base – 10' lengths, .040" nominal thickness, prepainted galvanized steel. Cover – 5' lengths, .040" nominal thickness, galvanized steel, baked enamel finish.
100 ft. 100 ft.
SR250 Series – Two-Piece Raceway – Ivory Ivory Cat. No.
SR250V-C5FT
Base – 10' lengths, .040" nominal thickness, prepainted galvanized steel. SR250V-C5FT Cover – 5' lengths, .040" nominal thickness, galvanized steel, baked enamel finish.
4-1
100 ft.
SR250V-BSE
1-13/16"
6"
11/1
Std. Pkg.
Description
100 ft.
/2"
/2"
4-1
SR250V-AP
SR250 Series – Fittings – Gray Gray Cat. No.
Std. Pkg.
2"
Description
16"
3/4"
15/
SR250-AP
1-7/16"
SR250-C
SR250-C SR250-CV 1-3
1"
"
/16
SR250-EC SR250-EF SR250-EL
1-5/8"
SR250V-CV
5 40 40 5 5 5 5
/8"
1-1
1-1/8"
SR250-ELR
Adapter Plate – For feeding SR250 raceway from existing in wall box. Removable section of cover for feeding conductors in middle of raceway run. Plastic cover. Coupler – For connecting sections of raceway base. Cover Clip – Hides uneven seams or rough cut edges. Plastic cover. End Cap – Plastic cover finishes end of raceway run. Entrance End Feed – Feed raceway with conduit, d" trade size knockout in base. Plastic cover. External Elbow – To run raceway around outside wall. Plastic cover. Radiused External Elbow – Maintains 1d" bend radius for Category 5e and fiber optic cable around outside corner. Plastic cover.
SR250 Series – Fittings – Ivory
1-9/16"
SR250V-EC /8"
1-5
Ivory Cat. No.
2"
SR250V-AP 1-3 "
/16
SR250-C SR250V-CV
1-11/16"
SR250V-EF
1-3/16"
SR250V-EC SR250V-EF
2-3/8"
SR250V-EL 6"
1/1
1-1
SR250V-ELR
SR250V-EL
Std. Pkg.
Description
5 40 40 5 5 5 5
1-11/1
6"
"
/16
1-3
Adapter Plate – For feeding SR250 raceway from existing in wall box. Removable section of cover for feeding conductors in middle of raceway run. Plastic cover. Coupler – For connecting sections of raceway base. Cover Clip – Hides uneven seams or rough cut edges. Plastic cover. End Cap – Plastic cover finishes end of raceway run. Entrance End Feed – Feed raceway with conduit, d" trade size knockout in base. Plastic cover. External Elbow – To run raceway around outside wall. Plastic cover. Radiused External Elbow – Maintains 1d" bend radius for Category 5e and fiber optic cable around outside corner. Plastic cover.
/8"
5-3 ® ®
16
Large Metallic
T&B Surface Raceway SR250 Series – Fittings – Gray GRAY Cat. No.
Flat Elbow – For 90° turns on same surface. Plastic Cover Ground Clamp – To connect grounding conductor for supplemental raceway ground. Internal Elbow – Raceway runs on inside corner. Plastic cover. Support Clip – Mounts raceway, wired sections or cord-ended units to wall. Side Transition Fittings – To top off run of SR250 raceway to feed B300 or B400 raceway. Tee. Wire Retainer – Holds cables/wires in place in raceway base. Device Box – Twistouts on all sides of cover. Base has d" and f" trade size knockouts and rectangular knockout for mounting to existing in-wall box. (4e" L. x 2g" W. x 1f" D.) Two-Gang Device Box – Twistouts on all sides of cover. Base has d" and f" trade size knockouts and rectangular knockout for mounting to existing in-wall box. (4e" L. x 4f" W. x 1f" D.)
SR250-FL SR250-GC SR250V-FL
SR250-IL SR250-SC SR250-STF SR250-T SR250-WR SR2548
SR250V-GC
Std. Pkg.
Description
SR2548-2
5 5 5 40 5 5 40 5 5
SR250 Series – Fittings – Ivory SR250V-IL
IVORY Cat. No.
SR250V-FL SR250V-GC SR250V-IL SR250V-SC SR250V-STF SR250V-SC
Std. Pkg.
Description
SR250V-T SR250V-WR SR2548V SR2548-2V
Flat Elbow – For 90° turns on same surface. Plastic Cover. Ground Clamp – To connect grounding conductor for supplemental raceway ground. Internal Elbow – Raceway runs on inside corner. Plastic cover. Support Clip – Mounts raceway, wired sections or cord-ended units to wall. Side Transition Fittings – To top off run of SR250 raceway to feed B300 or B400 raceway. Tee. Wire Retainer – Holds cables/wires in place in raceway base. Device Box – Twistouts on all sides of cover. Base has d" and f" trade size knockouts and rectangular knockout for mounting to existing in-wall box. (4e" L. x 2g" W. x 1f" D.) Two-Gang Device Box – Twistouts on all sides of cover. Base has d" and f" trade size knockouts and rectangular knockout for mounting to existing in-wall box. (4e" L. x 4f" W. x 1f" D.)
5 5 5 40 5 5 40 5 5
SR250V-STF
SR250V-T
SR2548V
SR248-2V
SR250V-WR ® ®
17
Large Metallic
T&B Surface Raceway SR500 Series – Two-Piece Raceway – Gray
2-3/4''
GRAY Cat. No. 1-3/4''
SR500
SR500-BSE
SR500-BSE SR500-C5FT SR500-C12 SR500-C18 SR500-C24 SR500-C36
Std. Pkg.
Description
Base – 10' long, packed 5 per carton. Cover – 5' long, packed 10 per carton. Cover – 7.5" long, pre-cut to place devices 12" on-center. Cover – 13.5" long, pre-cut to place devices 18" on-center. Cover – 19.5" long, pre-cut to place devices 24" on-center. Cover – 31.5" long, pre-cut to place devices 36" on-center.
50 ft. 50 ft. 10 10 10 5
SR500 Series – Two-Piece Raceway – Ivory IVORY Cat. No.
SR500-C5FT
SR500V-BSE SR500V-C5FT SR500V-C12 SR500V-C18 SR500V-C24 SR500V-C36
Std. Pkg.
Description
Base – 10' long, packed 5 per carton. Cover – 5' long, packed 10 per carton. Cover – 7.5" long, pre-cut to place devices 12" on-center. Cover – 13.5" long, pre-cut to place devices 18" on-center. Cover – 19.5" long, pre-cut to place devices 24" on-center. Cover – 31.5" long, pre-cut to place devices 36" on-center.
50 ft. 50 ft. 10 10 10 5
® ®
18
Large Metallic
T&B Surface Raceway SR500 Series – Elbows and Fittings – Gray GRAY Cat. No.
SR500-BF
SR500-EC
Description
SR500-BF SR500-C SR500-EC SR500-EF SR500-EL SR500-EL45 SR500-FL SR500-FL45 SR500-IL SR500-IL45 SR500-PF SR500-T SR500-WR
Back Feed (1c" hole cut for wire feed). Coupling (Galvanized). End Blank. * End Feed. * 90° External Elbow – for surfaces at right angles. 45° External Elbow – for surfaces at 45° angles. 90° Flat Elbow – for right angle turns on the same surface. 45° Flat Elbow – for angled turns on the same surface. 90° Internal Elbow – for surfaces at right angles. 45° Internal Elbow – for surfaces at 45° angles. Panel Flange. Tee Fitting. Wire Retainer. (Galvanized)
Std. Ctn.
Std. Pkg.
1 10 5 1 1 1 1 1 1 1 1 1 10
20 200 100 20 20 20 20 20 20 20 20 20 200
Std. Ctn.
Std. Pkg.
1 10 1 1 1 1 1 1 1 1 1 1 10
12 200 20 20 20 20 20 20 20 20 20 20 200
SR500 Series – Elbows and Fittings – Ivory IVORY Cat. No.
SR500-EF
SR500-C
Description
SR500V-BF SR500VC SR500V-EC SR500V-EF SR500V-EL SR500V-EL45 SR500V-FL SR500V-FL45 SR500V-IL SR500V-IL45 SR500V-PF SR500V-T SR500VWR
Back Feed (1c" hole cut for wire feed). Coupling (Galvanized). End Blank. * End Feed. * 90° External Elbow – for surfaces at right angles. 45° External Elbow – for surfaces at 45° angles. 90° Flat Elbow – for right angle turns on the same surface. 45° Flat Elbow – for angled turns on the same surface. 90° Internal Elbow – for surfaces at right angles. 45° Internal Elbow – for surfaces at 45° angles. Panel Flange. Tee Fitting. Wire Retrainer (Galvanized).
*: c/w 1/2” and 3/4” concentric knockouts
SR500-EL
SR500-EL45
SR500-IL
SR500-FL
SR500-IL45
SR500-T
SR500-WR
SR500-FL45 SR500-PF ® ®
19
Large Metallic
T&B Surface Raceway SR500 Series – Face Plates – Gray GRAY Cat. No.
SR500P-D
SR500P-G
SR500P-D SR500P-G SR500P-L SR500P-S SR500P-H SR500P-T SR500P-C SR500P-B SR500P-W
Std. Pkg.
Single Duplex. Single Decora Opening (GFCI). Single Opening for commercially available face plates. Single Receptacle (1.40" dia.). Single Receptacle (1.59" dia.). Single Telephone. g" Grommeted Opening. Blank Plate. Single Switch Opening.
20 20 20 20 20 20 20 20 20
SR500 Series – Face Plates – Ivory IVORY Cat. No.
SR500P-L
Description
SR500VP-D SR500VP-G SR500VP-L SR500VP-S SR500VP-H SR500VP-T SR500VP-C SR500VP-B SR500VP-W
Description
Std. Pkg.
Single Duplex. Single Decora Opening (GFCI). Single Opening for commercially available face plates. Single Receptacle (1.40" dia.). Single Receptacle (1.59" dia.). Single Telephone. g" Grommeted Opening. Blank Plate. Single Switch Opening.
20 20 20 20 20 20 20 20 20
SR500P-S
SR500P-H
SR500P-T
SR500P-B
SR500P-C ® ®
20
Large Metallic
T&B Surface Raceway SR600 Series – Two-Piece Raceway – Gray GRAY Cat. No.
SR600B-BSE SR600-BSE SR600-C5FT SR600-C12 SR600-C18 SR600-C24 SR600-C36
Std. Pkg.
Description
Base with barrier – 10' long, packed 4 per carton Base – 10' long, packed 4 per carton Cover – 5' long, packed 8 per carton Cover – 7.5" long, pre-cut to place devices 12" on-center Cover – 13.5" long, pre-cut to place devices 18" on-center Cover – 19.5" long, precut to place devices 24" on-center Cover – 31.5" long, pre-cut to place devices 36" on-center
40 ft. 40 ft. 40 10 10 10 05
SR600VB-BSE
SR600 Series – Two-Piece Raceway – Ivory IVORY Cat. No.
SR600V-BSE
SR600VB-BSE SR600V-BSE SR600V-C5FT SR600V-C12 SR600V-C18 SR600V-C24 SR600V-C36
Std. Pkg.
Description
Base with barrier – 10' long, packed 4 per carton Base – 10' long, packed 4 per carton Cover – 5' long, packed 8 per carton Cover – 7.5" long, pre-cut to place devices 12" on-center Cover – 13.5" long, pre-cut to place devices 18" on-center Cover – 19.5" long, precut to place devices 24" on-center Cover – 31.5" long, pre-cut to place devices 36" on-center
40 ft. 40 ft. 40 ft. 10 10 10 05
SR600V-C5FT
® ®
21
Large Metallic
T&B Surface Raceway SR600B Series – Elbows with Barriers – Gray
4-1/4
GRAY Cat. No.
SR600B-EL SR600B-EL45 SR600VB-EL
SR600B-FL SR600B-FL45
3-1/4
SR600B-IL SR600B-IL45 2-1/2
SR600B-T
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Divided Tee Fitting with internal crossovers and barriers to separate services
Std. Pkg.
20 20 20 20 20 20 20
SR600VB-EL45
SR600B Series – Elbows with Barriers – Ivory 7-1/4
IVORY Cat. No.
SR600VB-EL SR600VB-EL45 SR600VB-FL
SR600VB-FL
SR600VB-FL45 SR600VB-IL
2-1/2
SR600VB-IL45 4-1/2
SR600VB-T SR600VB-FL45
GRAY Cat. No.
SR600-EL SR600-EL45 SR600-FL SR600VB-IL
SR600-FL45 SR600-IL 3-1/4
SR600-IL45 SR600-T
20 20 20 20 20 20 20
IVORY Cat. No.
SR600VB-IL45
SR600V-EL 7-1/4
SR600V-EL45 SR600V-FL SR600V-FL45
9-3/4
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee Fitting
Std. Pkg.
20 20 20 20 20 20 20
SR600 Series – Elbows – Ivory
2-1/2
SR600V-IL SR600V-IL45
® ®
SR600V-T
22
90° External Elbow For surfaces at right angle 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Divided Tee with internal crossovers and barriers to separate services
Std. Pkg.
SR600 Series – Elbows – Gray 4-1/4
SR600VB-T
Description
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angle 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee Fitting
Std. Pkg.
20. 20 20 20 20 20 20
Large Metallic
T&B Surface Raceway SR600 Series – Fittings – Gray GRAY Cat. No.
SR600V-BF
SR600-BF SR600-C SR600-EC SR600-EF SR600-PF SR600-WR
Description
Std. Ctn.
Std. Pkg.
Back Feed (13⁄8'' hole cut to feed wire) Coupling (Galvanized) End Blank * End Feed * Panel Flange Wire Retainer
1 10 5 1 1 5
20 200 100 20 20 100
Description
Std. Ctn.
Std. Pkg.
Back Feed (13⁄8'' hole cut to feed wire) Coupling (Galvanized) End Blank * End Feed * Panel Flange Wire Retainer
1 10 5 1 1 5
20 200 100 20 20 100
SR600 Series - Fittings - Ivory SR600-C
IVORY Cat. No.
SR600V-BF SR600-C SR600V-EC SR600V-EF SR600V-PF SR600-WR
*: c/w 1/2” and 3/4” concentric knockouts SR600V-EC
SR600V-EF
SR600V-PF
SR600-WR
® ®
23
Large Metallic
T&B Surface Raceway Standard Device Plates for Metallic Surface Raceway – Gray GRAY Cat. No.
SR600VP-D
SR600P-D SR600P-DC SR600P-DD SR600P-DT SR600P-DTT SR600P-G SR600P-GG SR600P-SC SR600P-HC SR600P-L
SR600VP-DC
SR600P-LL SR600P-C SR600P-B
Std. Pkg.
Description
Single Duplex Combination Duplex and g" Grommeted Opening Double Duplex Single Duplex with Single Telephone Opening Single Duplex with Two Modular Jack Openings Single Decora Opening (GFCI) Double Decora Opening (GFCI) Combination Single Receptacle (1.40 dia.) and g" Grommeted Opening Combination Single Receptacle (1.59 dia.) and g" Grommeted Opening Single Opening for Commercially Available Face Plates Double Opening for Commercially Available Face Plates Single g" Grommeted Opening Blank Plate for 600P Series
20 20 20 20 20 20 20 20 20 20 20 20 20
NOTE: 600P Series device plates used for SR600B, SR600, SR700B and SR700 series raceways.
Standard Device Plates for Metallic Surface Raceway – Ivory SR600VP-DD
SR600VP-DT
IVORY Cat. No.
SR600VP-D SR600VP-DC SR600VP-DD SR600VP-DT SR600VP-DTT SR600VP-G SR600VP-GG SR600VP-SC SR600VP-HC SR600VP-L SR600VP-LL SR600VP-GD SR600VP-C SR600VP-B
SR600VP-DTT
SR600VP-G
SR600VP-GG
Std. Pkg.
Description
Single Duplex Combination Duplex and g" Grommeted Opening Double Duplex Single Duplex with Single Telephone Opening Single Duplex with Two Modular Jack Openings Single Decora Opening (GFCI) Double Decora Opening (GFCI) Combination Single Receptacle (1.40 dia.) and g" Grommeted Opening Combination Single Receptacle (1.59 dia.) and g" Grommeted Opening Single Opening for Commercially Available Face Plates Double Opening for Commercially Available Face Plates Single Duplex with Single Decora opening (GFCI) Single g" Grommeted Opening Blank Plate for 600P Series
20 20 20 20 20 20 20 20 20 20 20 ? 20 20
NOTE: 600P Series device plates used for SR600B, SR600, SR700B and SR700 series raceways.
SR600VP-SC
SR600VP-HC
SR600VP-L
SR600VP-C
SR600VP-LL
SR600VP-B
® ®
24
Large Metallic
T&B Surface Raceway SR700 Series Raceway The extra large capacity of the SR700 series is the popular choice for locations with heavy concentration of power and communication wiring. Underfloor distribution for computer rooms, overhead cable conveyance for factory lighting or for electrical distribution to manufacturing equipment – the right choice is the SR700 raceway. In subtly attractive gray or ivory finish, the SR700 utilizes the same raceway cover and device mounting plates as the SR600 lower profile raceway.
SR700 Series – Two-Piece Raceway – Gray GRAY Cat. No.
SR700B-BSE SR700-BSE SR700B-BSE
SR600-C5FT SR600-C12 SR600-C18 SR600-C24 SR600-C36
SR700-BSE
Std. Pkg.
Description
Base with barrier – 10' Long Packed 2 per Carton Base – 10' Long Packed 2 per Carton Cover - 5' Long Packed 8 per Carton Cover - 7.5'' Long Pre-Cut to place Devices 12'' on center Cover - 13.5'' Long Pre-Cut to place Devices 18'' on-center Cover - 19.5'' Long Pre-Cut to place Devices 24'' on-center Cover - 31.5'' Long Pre-Cut to place Devices 36'' on-center
20 ft. 20 ft. 40 ft. 10 10 10 05
SR700 Series – Two-Piece Raceway – Ivory IVORY Cat. No.
SR700VB-BSE SR600V-C5FT
SR700V-BSE SR600V-C5FT SR600V-C12 SR600V-C18 SR600V-C24 SR600V-C36
Std. Pkg.
Description
Base with barrier – 10' Long Packed 2 per Carton Base – 10' Long Packed 2 per Carton Cover - 5' Long Packed 8 per Carton Cover - 7.5'' Long Pre-Cut to place Devices 12'' on center Cover - 13.5'' Long Pre-Cut to place Devices 18'' on-center Cover - 19.5'' Long Pre-Cut to place Devices 24'' on-center Cover - 31.5'' Long Pre-Cut to place Devices 36'' on-center
20 ft. 20 ft. 40 ft. 10. 10 10 05
® ®
25
Large Metallic
T&B Surface Raceway SR700 Series – Directional Fittings – Gray
6-1/8
GRAY Cat. No.
SR700-EL SR700B-EL SR700-EL45
SR700-EL
SR700-FL
4
SR700B-FL SR700-FL45 2-1/2
SR700-IL
SR700-EL45
SR700B-IL SR700-IL45 7-1/4
SR700-FL
SR700-T SR700B-T
Std. Pkg.
Description
90° External Elbow For outside corners 90° External Elbow with barrier For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 90° Flat Elbow with barrier For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow To make inside corners turn 90° Internal Elbow with barrier For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee Divided Tee
20 20 20 20 20 20 20 20 20 20 20
SR700 Series – Directional Fittings – Ivory IVORY Cat. No.
2-1/2
4-1/2
SR700V-EL SR700VB-EL SR700V-EL45
SR700-FL45
SR700V-FL 6-1/8
SR700VB-FL SR700V-FL45 SR700V-IL SR700-IL
SR700VB-IL SR700V-IL45
4
SR700V-T SR700VB-T
Std. Pkg.
Description
External Elbow To continue raceway run around external corner 90° External Elbow with barrier Turns on outside corner 45° External Elbow For surfaces at 45° angles Flat Elbow 90° turn on flat surface 90° Flat Elbow with barrier For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface Internal Elbow For inside corner turns 90° Internal Elbow with barrier For raceway turns on inside corner 45° Internal Elbow For surfaces at 45° angle Tee Divided Tee
20 20 20 20 20 20 20 20 20 20 20
NOTE: SR700B-T and SR700VB-T are supplied with internal crossovers and barriers to maintain separation of services.
2-1/2
SR700-IL45
7-1/4
9-3/4
SR700-T
® ®
26
Large Metallic
T&B Surface Raceway SR700 Series – Fittings – Gray GRAY Cat. No.
SR700-C
SR700-C SR700-BF SR700-EC SR700-EF SR700-PF SR700-WR
Description
Coupling (Galvanized) Back Feed (1c'' grommeted hole cuts to feed wire) End Blank * End Feed * Panel Flange Wire Retainer
Std. Ctn.
Std. Pkg.
5 1 5 1 1 10
50 10 100 20 10 100
Std. Ctn.
Std. Pkg.
5 1 5 1 1
50 12 100 20 20
SR700 Series – Fittings – Ivory IVORY Cat. No.
Description
SR700-BF
SR700VC SR700V-BF SR700V-EC SR700V-EF SR700V-PF
Coupling (Galvanized) Back Feed (1c'' grommeted hole cuts to feed wire) End Blank * End Feed * Panel Flange
*: c/w 1/2” and 3/4” concentric knockouts SR700-EC
SR700-EF
SR700-PF
SR700-WR
® ®
27
Large Metallic
T&B Surface Raceway Standard Device Plates for Metallic Surface Raceway – Gray GRAY Cat. No.
SR600VP-D
SR600P-D SR600P-DC SR600P-DD SR600P-DT SR600P-DTT SR600P-G SR600P-GG SR600P-SC SR600P-HC SR600P-L
SR600VP-DC
SR600P-LL SR600P-C SR600P-B
Std. Pkg.
Description
Single Duplex Combination Duplex and g" Grommeted Opening Double Duplex Single Duplex with Single Telephone Opening Single Duplex with Two Modular Jack Openings Single Decora Opening (GFCI) Double Decora Opening (GFCI) Combination Single Recep (1.40 dia.) and g" Grommeted Opening Combination Single Recep (1.59 dia.) and g" Grommeted Opening Single Opening for Commercially Available Face Plates Double Opening for Commercially Available Face Plates Single g" Grommeted Opening Blank Plate for 600P Series
20 20 20 20 20 20 20 20 20 20 20 20 20
NOTE: 600P Series device plates used for SR600B, SR600, SR700B and SR700 series raceways.
Standard Device Plates for Metallic Surface Raceway – Ivory SR600VP-DD
SR600VP-DT
IVORY Cat. No.
SR600VP-D SR600VP-DC SR600VP-DD SR600VP-DT SR600VP-DTT SR600VP-G SR600VP-GG SR600VP-SC SR600VP-HC SR600VP-L SR600VP-LL SR600VP-C SR600VP-B
SR600VP-DTT
Std. Pkg.
Description
Single Duplex Combination Duplex and g" Grommeted Opening Double Duplex Single Duplex with Single Telephone Opening Single Duplex with Two Modular Jack Openings Single Decora Opening (GFCI) Double Decora Opening (GFCI) Combination Single Recep (1.40 dia.) and g" Grommeted Opening Combination Single Recep (1.59 dia.) and g" Grommeted Opening Single Opening for Commercially Available Face Plates Double Opening for Commercially Available Face Plates Single g" Grommeted Opening Blank Plate for 600P Series
20 20 20 20 20 20 20 20 20 20 20 20 20
NOTE: 600P Series device plates used for SR600B, SR600, SR700B and SR700 series raceways.
SR600VP-G
SR600VP-SC
SR600VP-L
SR600VP-C
SR600VP-GG
SR600VP-HC
SR600VP-LL
SR600VP-B
® ®
28
Large Metallic
T&B Surface Raceway SR800 Series Raceway The SR800 series is the industry’s only triple compartment steel surface raceway. Used to separate power, voice and data cabling or to segregate “clean” from “dirty” power circuits for those specialized applications.
SR800 Series – Two-Piece Raceway – Gray GRAY Cat. No.
SR800-BSE SR800-C5FT SR800-C12 SR800-C18 SR800-C24 SR800-C36
Std. Pkg.
Description
Base - 10' Long Packed 2 per Carton Cover - 5' Long Packed 4 per Carton Cover - 7.5'' Long Pre-Cut to place Devices 12'' on center Cover - 13.5'' Long Pre-Cut to Place Devices 18'' on-center Cover - 19.5'' Long Pre-Cut to place Devices 24'' on-center Cover - 31.5'' Long Pre-Cut to place Devices 36'' on-center
20 ft. 20 ft. 10 10 10 05
SR800 Series – Two-Piece Raceway – Ivory IVORY Cat. No.
SR800V-BSE SR800V-C5FT SR800V-C12 SR800V-C18 SR800V-C24 SR800V-C36
Std. Pkg.
Description
Base - 10' Long Packed 2 per Carton Cover - 5' Long Packed 4 per Carton Cover - 7.5'' Long Pre-Cut to place Devices 12'' on center Cover - 13.5'' Long Pre-Cut to Place Devices 18'' on-center Cover - 19.5'' Long Pre-Cut to place Devices 24'' on-center Cover - 31.5'' Long Pre-Cut to place Devices 36'' on-center
20 ft. 20 ft. 10 10 10 05
® ®
29
Large Metallic
T&B Surface Raceway SR800 Series – Elbows and Tees – Gray
9-3/4
GRAY Cat. No.
SR800-EL SR800-EL45 SR800-FL
SR800-FL SR800-FL45
3-1/4
SR800-IL SR800-IL45 2-1/2
SR800-T
Std. Pkg.
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee
20 20 20 20 20 20 12
SR800-IL
SR800 Series – Elbows and Tees – Ivory
4-1/4
IVORY Cat. No.
SR800V-EL SR800V-EL45
2-1/2
SR800-EL
SR800V-FL SR800V-FL45 2-1/2
SR800V-IL 5-1/2
SR800V-IL45 SR800V-T SR800-FL45
Std. Pkg.
Description
90° External Elbow For surfaces at right angles 45° External Elbow For surfaces at 45° angles 90° Flat Elbow For right angle turns on the same surface 45° Flat Elbow For angled turns on the same surface 90° Internal Elbow For surfaces at right angles 45° Internal Elbow For surfaces at 45° angles Tee
20 20 20 20 20 20 20
NOTE: SR800-T and SR800V-T are supplied with internal crossovers and barriers to maintain separation of services.
3-1/4
2-1/2
SR800-IL45
3-1/4
2-1/2
SR800-EL45
4-1/2
12-1/4 ® ®
SR800-T
30
Large Metallic
T&B Surface Raceway SR800 Series – Fittings – Gray
SR800-C
GRAY Cat. No.
Description
Std. Ctn.
Std. Pkg.
SR800-BF SR800-C SR800-EC SR800-EF SR800-PF SR800-WR
Back Feed (13⁄8'' hole cut for feed wire) Coupling (Galvanized) End Blank * End Feed * Panel Flange Wire Retainer
1 5 5 1 1 10
12 100 100 20 12 200
Description
Std. Ctn.
Std. Pkg.
Back Feed (13⁄8'' hole cut for feed wire) Coupling (Galvanized) End Blank * End Feed * Panel Flange Wire Retainer
1 5 5 1 10 10
12 100 100 20 200 200
SR800 Series – Fittings – Ivory SR800-BF
IVORY Cat. No.
SR800V-BF SR800VC SR800V-EC SR800V-EF SR800V-PF SR800-WR
*: c/w 1/2” and 3/4” concentric knockouts SR800-EC
SR800-PF
SR800-EF
SR800-WR
® ®
31
Large Metallic
T&B Surface Raceway Standard Device Plates for Metallic Surface Raceway – Gray GRAY Cat. No.
SR800P-DDD
SR800P-DTD
SR800P-DDD SR800P-DTD SR800P-GGG SR800P-GTG
Description
Std. Pkg.
Triple Duplex Double Duplex with Single Telephone Opening Triple Decora (GFCI) Double Decora with Single Telephone Opening
20 20 20 20
Standard Device Plates for Metallic Surface Raceway – Ivory IVORY Cat. No. SR800P-GGG
SR800P-GTG
SR800VP-DDD SR800VP-DTD SR800VP-GGG SR800VP-GTG
Description
Std. Pkg.
Triple Duplex Double Duplex with Single Telephone Opening Triple Decora (GFCI) Double Decora with Single Telephone Opening
20 20 20 20
® ®
32
