Technical Data Sheet - Farnell
Technical Data Sheet STRAIGHT PLUG CRIMP TYPE CABLE 2.6/50 S
PAGE 1/3
ISSUE 07-04-16E
SERIES TNC
PART NUMBER R143075000
All dimensions are in mm. . pn
. ao
COMPONENTS Body Center contact Outer contact Insulator Gasket Others parts -
MATERIALS BRASS BRASS PTFE SILICONE RUBBER BRASS -
PLATING (m) NICKEL 2 GOLD 0.5 OVER NICKEL 2 -
NICKEL 2 -
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet STRAIGHT PLUG CRIMP TYPE CABLE 2.6/50 S
PAGE 2/3
ISSUE 07-04-16E
SERIES TNC
PART NUMBER R143075000
PACKAGING Standard 100
Unit Contact us
Other Contact us
ELECTRICAL CHARACTERISTICS Impedance Frequency 1.30* + VSWR Insertion loss RF leakage -( Voltage rating Dielectric withstanding voltage Insulation resistance
50 0-11 0,0000 0.06 57 335 1000 5000
ENVIRONMENTAL
GHz x F(GHz) Maxi F(GHz) dB Maxi - F(GHz)) dB Maxi Veff Maxi Veff mini M mini
27 27 NA
°C Atm.cm3/s
SPECIFICATION QAE 06-02 . .
MECHANICAL CHARACTERISTICS Center contact retention Axial force – Mating End Axial force – Opposite end Torque
-65/+165 NA NA
Operating temperature Hermetic seal Panel leakage
CABLE ASSEMBLY N mini N mini N.cm mini
Stripping mm
a 4
b 10
c 18,5
d 0
e 14,5
f 0
Assembly instruction: Crimp 03 Recommended torque Mating Panel nut Clamp nut A/F clamp nut Mating life Weight
NA NA NA 0,0000 500 11,8370
N.cm N.cm N.cm mm
Cycles mini g
Recommended cable(s) KX 22A RG 188 RG 316 ECO 316 RG 174 KX 3B RG 174 FTX RG 174 RG 316 Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly
Cable retention - pull off - torque
40 NA
N mini N.cm
TOOLING Part Number R282293000 R282223000 R282235011 R282888020
Description CRIMPING TOOL M22520/5-01 CRIMPING TOOL CRIMPING DIES M22520/5-11 FORK TOOL
Hexagon 1.73-5.41 1.73-5.41
OTHER CHARACTERISTICS *1.3 from 0 to 2GHz 2 from 0 to 11GHz
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet STRAIGHT PLUG CRIMP TYPE CABLE 2.6/50 S
PAGE 3/3
ISSUE 07-04-16E
SERIES TNC
PART NUMBER R143075000
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
PAGE 1/3
ISSUE 07-04-16E
SERIES TNC
PART NUMBER R143075000
All dimensions are in mm. . pn
. ao
COMPONENTS Body Center contact Outer contact Insulator Gasket Others parts -
MATERIALS BRASS BRASS PTFE SILICONE RUBBER BRASS -
PLATING (m) NICKEL 2 GOLD 0.5 OVER NICKEL 2 -
NICKEL 2 -
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet STRAIGHT PLUG CRIMP TYPE CABLE 2.6/50 S
PAGE 2/3
ISSUE 07-04-16E
SERIES TNC
PART NUMBER R143075000
PACKAGING Standard 100
Unit Contact us
Other Contact us
ELECTRICAL CHARACTERISTICS Impedance Frequency 1.30* + VSWR Insertion loss RF leakage -( Voltage rating Dielectric withstanding voltage Insulation resistance
50 0-11 0,0000 0.06 57 335 1000 5000
ENVIRONMENTAL
GHz x F(GHz) Maxi F(GHz) dB Maxi - F(GHz)) dB Maxi Veff Maxi Veff mini M mini
27 27 NA
°C Atm.cm3/s
SPECIFICATION QAE 06-02 . .
MECHANICAL CHARACTERISTICS Center contact retention Axial force – Mating End Axial force – Opposite end Torque
-65/+165 NA NA
Operating temperature Hermetic seal Panel leakage
CABLE ASSEMBLY N mini N mini N.cm mini
Stripping mm
a 4
b 10
c 18,5
d 0
e 14,5
f 0
Assembly instruction: Crimp 03 Recommended torque Mating Panel nut Clamp nut A/F clamp nut Mating life Weight
NA NA NA 0,0000 500 11,8370
N.cm N.cm N.cm mm
Cycles mini g
Recommended cable(s) KX 22A RG 188 RG 316 ECO 316 RG 174 KX 3B RG 174 FTX RG 174 RG 316 Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly
Cable retention - pull off - torque
40 NA
N mini N.cm
TOOLING Part Number R282293000 R282223000 R282235011 R282888020
Description CRIMPING TOOL M22520/5-01 CRIMPING TOOL CRIMPING DIES M22520/5-11 FORK TOOL
Hexagon 1.73-5.41 1.73-5.41
OTHER CHARACTERISTICS *1.3 from 0 to 2GHz 2 from 0 to 11GHz
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
Technical Data Sheet STRAIGHT PLUG CRIMP TYPE CABLE 2.6/50 S
PAGE 3/3
ISSUE 07-04-16E
SERIES TNC
PART NUMBER R143075000
This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.
