Three-Phase Induction Motors - Oriental Motor
Standard AC Motors
C-21
Overview, Product Series Constant Speed Motors
Standard AC Motors Three-Phase Induction Motors
Constant Speed Motors
Three-Phase Induction Motors Single-Phase Induction Motors
Three-Phase Induction Motors
Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
Page
C-22 C-30 K S Series [60 W (1/12 HP, 100 W (1/8 HP)] ·········· C-32 World K Series [6 W∼90 W (1/125 HP∼1/8 HP)] ···· C-58 BH Series [200 W (1/4 HP)] ····································· C-96 2-Pole, High-Speed Type [60 W∼150 W (1/12 HP∼1/5 HP)] ··· C-109 Features and Types of Three-Phase Induction Motors ····
General Specifications ············································
C-21
C-22 Three-Phase Induction Motors
Features and Types of Three-Phase Induction Motors Induction Motors
Electromagnetic Brake Motors
High-Efficiency K S Series 60 W (1/12 HP)
100 W (1/8 HP)
■Features of Three-Phase Induction Motors ●Optimal for Uni-Directional and Continuous Operation Induction motors are optimal for uni-directional and continuous operation such as a conveyor system.
●Speed Control Operation Combined use of an inverter with a three-phase motor enables speed control operation.
●Extensive Product Line The K S Series, World K Series and BH Series are available. We have motors with an output power range of 6 W (1/125 HP) to 200 W (1/4 HP) to meet your specific application.
●Compatible with Various Gearheads Combination with a gearhead allows the motor speed to be reduced to the required speed or generate higher torque.
■Types of Three-Phase Induction Motors Series
Induction Motors
Features, Lineup
●High Efficiency Three-Phase Motors through Optimal Design
K S Series
6W (1/125 HP)
A review of the basic motor design has yielded unprecedented high efficiency and energy savings.
15 W (1/150 HP)
●Best Characteristics with Inverter Combination
World K Series
60 W (1/12 HP)
●Conforms to Safety Standards
Output Power Voltage
Frame Size
● Applicable Standards
Output Power
UL/CSA Standards Certified under the China Compulsory Certification System✽ (CCC System) CE Marking (Low Voltage Directive)
BH Series 200 W (1/4 HP)
Voltage
□60 mm (□2.36 in.)∼□90 mm (□3.54 in.) Lead Wire Type: 6 W∼40 W (1/125 HP∼1/19 HP) Terminal Box Type: 25 W∼40 W (1/30 HP∼1/19 HP) Conduit Box Type: 25 W∼90 W (1/30 HP∼1/8 HP) 2-Pole, High-Speed Type: 60 W∼150 W (1/12 HP∼1/5 HP) Three-Phase 220/230 VAC
✽ Except Conduit Box Type ✽
● Motor Overheat Protection Device Thermal protector, Impedance protected
✽ Except Conduit Box Type
BH Series
●Smallest Frame Size among 200 W (1/4 HP) Motors These motors achieve a high output of 200 W (1/4 HP) with a frame size of 104 mm (4.09 in.).
●Hypoid Gear Right Angle Type is Available ●"Combination Type" for Easy Installation
●Tapped Hole at the Shaft End The gearhead shaft features a tapped hole for convenient connection with loads.
●Product Line Frame Size Output Power
With each combination type, the motor and gearhead come pre-assembled for easy installation.
●Conforms to Safety Standards and Global Voltage Specifications
Type
Voltage
C-22
□90 mm (□3.54 in.) Right-Angle Geared: 100 W (1/8 HP) Parallel Shaft Combination: 60 W (1/12 HP), 100 W (1/8 HP) Round Shaft: 60 W (1/12 HP), 100 W (1/8 HP) Three-Phase 220/230 VAC
●Product Line
All World K Series motors have an overheat protection device built-in and conform to major safety standards.
90 W (1/8 HP)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Frame Size
Speed can be controlled over a wide range, and high torque is exerted even at low speeds. Because it is a highperformance motor with little speed reduction even with a large load, stabilized speed control is possible.
25 W (1/30 HP)
40 W (1/19 HP)
●Product Line
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
□104 mm (□4.09 in.) 200 W (1/4 HP) Terminal Box Type: Right-Angle, Hollow Shaft Type, Right-Angle, Solid Shaft Type, Parallel Shaft Type, Round Shaft Type Cable Type: Right-Angle, Hollow Shaft Type, Right-Angle, Solid Shaft Type, Parallel Shaft Type, Round Shaft Type Three-Phase 220/230 VAC
Standard AC Motors
C-23
■Features of the K S Series High Efficiency Three-Phase Motors through Optimal Design ●High Efficiency at a Maximum of 73%
●High Performance
Specialized components and an optimal magnetic design are used to make high efficiency three-phase motors with a maximum efficiency of 73%. Motors are fanless with increased motor torque.
Characteristics have been improved through pursuit of the specifications required for the three-phase motor and a review of the design to create a high-performance motor with little speed reduction even with a large load. ● Changes in Speed according to Load
Optimized Configuration of Steel Plate
Specialized Three-Phase Motor Design
Low Loss Magnetic Steel Sheet
Constant Speed Motors Three-Phase Induction Motors
K S Series Conventional Product Load Torque[N·m]
Overview, Product Series
Single-Phase Induction Motors
Rated Torque
Reversible Motors Speed
Increased Winding Space Factor
100 W (1/8 HP)✽ (60 Hz)
K S Series
70%
73.9%
Conventional Product
65.7%
66.7%
1500
1800
Electromagnetic Brake Motors
●Increased Motor Output Power Output power of 100 W (1/8 HP) in a 90 mm (3.54 in.) frame size is achieved through increased efficiency. An overall length 15 mm (0.59 in.) shorter than the conventional motor contributes to equipment downsizing.
● Comparison of Maximum Efficiency (Reference values) 60 W (1/12 HP) (60 Hz)
[r/min]
15 mm (0.59 in.) K S Series
Output Power 100 W (1/8 HP)
✽Conventional product values are for 90 W (1/8 HP)
Mass −0.3 kg (−0.66 lb.)
●Power Consumption Reduced by up to 10% Compared to a conventional 90 W (1/8 HP) motor under the same conditions, power consumption is reduced by a maximum of about 10%, contributing to the equipment's energy savings.
Loss Reduced Power Consumption Reduced by about 31% by about 10%
150
Input [W]
100
45
31
Loss
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors
Conventional Product
Output Power 90 W (1/8 HP)
Right-Angle Gearheads
●Fanless With reduced loss, there is less heat generation in the motor, so the cooling fan that was incorporated into the conventional 60 W (1/12 HP) min. products is no longer included. K S Series
Linear Heads
Conventional Product Brake Pack
50
90
90
Output Power Accessories
0
Conventional Product K S Series 100 W (1/8 HP) 90 W (1/8 HP) when outputting 90 W (1/8 HP)
Cooling Fan
●No Dust, etc.
Installation
With no cooling fan, dust is not blown around.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-23
C-24 Three-Phase Induction Motors Best Characteristics Achieved when Combined with an Inverter ●Wide Range of Speeds Speed can be controlled over a wide range using an inverter, from 3∼120 Hz✽. Also, with improved characteristics, high torque can be exerted even at low speeds. Induction Motors
✽80 Hz with a right-angle shaft Conventional Product
Permissible Torque
High-Efficiency K S Series
100
50
0
60 W (1/12 HP)
0
500
1000
1500
2000
2500
3000 3500 4000 Speed [r/min]
Speed Ratio 12:1 200
2400
Even with a Load There is Little Speed Reduction 100 W (1/8 HP) Round Shaft Type
100
50
0 0
500
1000
1500 2000 2500 Speed [r/min] Speed Ratio 40:1
3000
3500
4000
3600 (120 Hz)✽
●Handles High-Speed Rotation (Round shaft type)
Because it is a high-performance motor with little speed reduction Induction even with a large load, stabilized speed control is possible.
6W (1/125 HP)
Continuous Operation Range
90 (3 Hz)
●Improved Speed Stability
Motors
100 W (1/8 HP) Round Shaft Type
Permissible Torque Rated Torque [%]
Rated Torque [%]
Electromagnetic Brake Motors
100 W (1/8 HP)
K S Series
Continuous Operation Range
Creep-free bearings, etc. are used in the round shaft type, and components capable of handling high-speed rotation have been selected and designed for inverter control.
Continuous Operation Range Speed at max. Permissible Torque
25 W (1/30 HP)
Speed with No Load Rated Torque [%]
15 W (1/150 HP)
100 Permissible Torque 50
0 0
500
1000
1500
40 W (1/19 HP)
2000 2500 Speed [r/min]
3000
3500
4000
Uses Creep-Free Bearings (Round shaft type only)
Slim Body Terminal Box (Terminal box type) 60 W (1/12 HP)
90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
●Equipped with an Easy-to-Wire Slim Body Terminal Box
●IP66-Compliant Drip-Proof Specification
This new shape of terminal box is designed to make wiring the terminal block easier. It has a slim body, with a cable outlet that can be rotated in 90˚ increments for 4 possible directions.
The seal structure for the motor, gearhead and terminal box components has been strengthened. The terminal box type✽ is compliant with the IP66 degree of protection.
40 mm✽ (1.57 in.)
✽ The round shaft type is 46 mm (1.81 in.).
C-24
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
✽Excluding installation surface of round shaft type IP66: The IP indication that shows the watertight and dust-resistant performance are specified under IEC 60529 and IEC 60034-5.
Main Specifications ● Material Case and terminal box: Aluminum Output shaft: S45C Screws: Stainless steel (externally facing screws only) ● Surface Treatment Case and terminal box: Painted (excluding installation surface)
Standard AC Motors
C-25
High-Strength Gearhead Uses a gearhead that excels in both torque and strength.
Right-Angle Geared Type ●Internal Gearhead Structure
80
Rated Torque [N·m (lb-in)]
Permissible Radial Load Uses Hypoid Gears
Permissible Axial Load
50
Permissible Radial Load 1700 N (380 lb.)
The seal structure is strengthened. This contributes to increased equipment reliability.
(10 mm (0.39 in.) from the end of the output shaft)
Constant Speed Motors
Rated Torque 3.5 Times Higher
40 30 20 (177) 10 0
Oil Seal
Overview, Product Series
K S Series
70 (610) 60
Oriental Motor Conventional Product 0
50
100
Expanded High Gear Ratio Lineup
150
200
250
Gear Ratio K S Series Rated Torque 70 N∙m (610 lb-in) Conventional Product 5GE-RA Rated Torque 20 N∙m (177 lb-in)
Permissible Axial Load 350 N (78 lb.)
●Internal Gearhead Structure Oil Seal
Permissible Torque [N·m (lb-in)]
Parallel Shaft Combination Type Permissible Radial Load
Carburized Shaft and Gears
Permissible Axial Load
Permissible Radial Load 500 N (112 lb.) Large-diameter Bearing
Side Panel
(10 mm (0.39 in.) from the end of the output shaft)
Permissible Axial Load 150 N (33 lb.)
Rated Torque Doubled
30 20 (177)
Electromagnetic Brake Motors
Oriental Motor Conventional Product
Clutch & Brake Motors
10 0
Single-Phase Induction Motors Reversible Motors
K S Series
40 (350)
Three-Phase Induction Motors
0
50
100
150
200
Gear Ratio K S Series Permissible Torque 40 N∙m (350 lb-in) Conventional Product 5GE-S Permissible Torque 20 N∙m (177 lb-in)
Low-Speed Synchronous Motors
Torque Motors
Benefits of Using the Right-Angle Geared Type ●Connect the Drive Shaft Directly to a Hollow Shaft Geared Type to Reduce Costs
Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Conveyor drive rollers can be installed on both ends of ●Component cost reduction through reduction of fastening parts ●Assembly steps reduced through mechanism simplification ●Reduced maintenance, such as belt tension adjustment ●Space saving
Brake Pack
the load shaft of a hollow shaft type. The equipment can be made even smaller compared to when the motor is installed on the
Accessories
side of the conveyor.
●Motor Mounted Perpendicularly to Load to Save Space
Installation
Reduced by 81 mm (3.19 in.)
200 mm (7.87 in.)
World K Series 90 W (1/8 HP) with Parallel Shaft Gearhead
119 mm (4.69 in.)
K S Series 100 W (1/8 HP) Right-Angle, Hollow Shaft Type
Because the output shaft of the gear is vertically in the middle of the installation surface, it is possible to change the installation direction horizontally. Installation to suit the application can be selected.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-25
C-26 Three-Phase Induction Motors ■System Configuration ●Right-Angle Geared Type
K S Series Induction Motors
Electromagnetic Brake Motors
AC Power Supply (Main power supply)
High-Efficiency K S Series 60 W (1/12 HP)
100 W (1/8 HP)
Accessories (Sold separately)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
25 W (1/30 HP)
40 W (1/19 HP)
60 W (1/12 HP)
90 W (1/8 HP)
Flexible Couplings ➜ Page C-201
Torque Arms ➜ Page C-200
Solid shaft type only
Hollow shaft type only
CR Circuit for Surge Suppression ➜ Page C-208
●Example of System Configuration Sold Separately CR Circuit for Surge Torque Arm Suppression SOT5A EPCR1201-2 $23.00 $5.00
Induction Motor
5IK100VES-GHR25 $317.00
● The system configuration shown above is an example. Other combinations are also available.
●Parallel Shaft Combination Type
K S Series
BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
AC Power Supply (Main power supply)
Accessories (Sold separately)
Flexible Couplings ➜ Page C-201
Mounting Brackets ➜ Page C-196
●Example of System Configuration Sold Separately Induction Motor
Mounting Bracket
Flexible Coupling
SOL5UBF $29.00
MCL5518F12 $97.00
5IK60VEST2-25A $261.00
CR Circuit for Surge Suppression EPCR1201-2 $5.00
● The system configuration shown above is an example. Other combinations are also available.
C-26
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
CR Circuit for Surge Suppression ➜ Page C-208
Standard AC Motors
C-27
■Product Line of Three-Phase Induction Motors ●Induction Motors Motor Frame Size, Output Power Series
Voltage (VAC)
Type
□60 mm □70 mm □80 mm (□2.36 in.) (□2.76 in.) (□3.15 in.) 6W (1/125 HP)
15 W (1/50 HP)
25 W (1/30 HP)
□90 mm (□3.54 in.) 40 W (1/19 HP)
60 W (1/12 HP)
90 W (1/8 HP)
□104 mm (□4.09 in.) 100 W (1/8 HP)
Three-Phase 220/230
Terminal Box Type Lead Wire
K S Series Parallel Shaft Combination Type Round Shaft Type
Three-Phase 220/230
Terminal Box Type
●
●
Lead Wire
●
●
World K Series
Three-Phase 220/230
2-Pole, High-Speed Type
Three-Phase 220/230 Three-Phase 220/230
BH Series
200 W (1/4 HP)
● ●
K S Series Right-Angle Geared Type
Terminal Box Conduit Box Lead Wire Terminal Box Lead Wire Terminal Box Cable
150 W (1/5 HP)
●
●
● ● ●
● ● ●
●
●
●
●
Overview, Product Series Constant Speed Motors Three-Phase Induction Motors Single-Phase Induction Motors
● ● ● ●
●Electromagnetic Brake Type Motor
Reversible Motors
Electromagnetic Brake Motors
Motor Frame Size, Output Power Series
Voltage (VAC)
Type
□60 mm □70 mm □80 mm (□2.36 in.) (□2.76 in.) (□3.15 in.) 6W (1/125 HP)
15 W (1/50 HP)
25 W (1/30 HP)
□90 mm (□3.54 in.) 40 W (1/19 HP)
60 W (1/12 HP)
90 W (1/8 HP)
□104 mm (□4.09 in.) 100 W (1/8 HP)
200 W (1/4 HP)
● ●
K S Series Right-Angle Geared Type
Three-Phase 220/230
Terminal Box Type Cables
K S Series Parallel Shaft Combination Type Round Shaft Type
Three-Phase 220/230
Terminal Box Type
●
●
Cables
●
●
World K Series
Three-Phase 220/230
Lead Wire
BH Series
Three-Phase 220/230
Terminal Box Type
●
●
●
●
●
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors
● ●
Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-27
C-28 Three-Phase Induction Motors ■Shaft Placement of Solid Shaft Type
■Product Number ●K S Series ◇Right-Angle Geared Type Induction Motors
Electromagnetic Brake Motors
High-Efficiency K S Series 60 W (1/12 HP)
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
25 W (1/30 HP)
5 I K 100 V ES M T2 - GHR 15 ①② ③
④
⑤
⑥
⑦
⑧
⑨
⑩
◇Parallel Shaft Combination Type
5 I K 100 V ES M T2 - 15A ①② ③
④
⑤
⑥
⑦
⑧
⑩
Protective Earth Terminal
5 I K 100 V A - ES T2 ①② ③
④
⑤ ⑩
⑥
60 W (1/12 HP)
⑧
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
Motor Frame Size 5: 90 mm (3.54 in.) Product Name I: Induction Motor Series K: K Series Output Power (W) (Example) 100: 100 W (1/8 HP) V: Three-Phase High Efficiency Motor Power Supply Voltage/Number of Poles ES: Three-Phase 220/230 VAC 4-Pole M: Power Off Activated Electromagnetic Brake Type T2: Terminal Box Type Blank: Lead Wire Type or Cable Type
⑨
Output Shaft Type and Direction
GHR: Hollow Shaft Type GAR: Solid Shaft Type (R shaft)
⑩
Gear Ratio and Shaft Configuration
Number: Gear Ratio for Gearhead A: Round Shaft Type
GAL: Solid Shaft Type (L shaft)
90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
5 I K 40 GN - SW 2 T ① ② ③
④
⑤
⑥
⑦ ⑧
① ② ③ ④
Motor Frame Size Motor Type Series Output Power (W)
2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.) I: Induction Motor K: K Series (Example) 40: 40 W (1/19 HP)
⑤
Motor Shaft Type, Type of Pinion
A: Round Shaft GN: GN Type Pinion Shaft GE: GE Type Pinion Shaft
⑥
Power Supply Voltage/ Number of Poles 2: RoHS-Compliant T: Terminal Box Type
SW: Three-Phase 220/230 VAC 4-Pole TW: Three-Phase 220/230 VAC 2-Pole
⑦ ⑧
M: Power Off Activated Type Electromagnetic Brake
◇Conduit Box Type
5 I K 40 GN - S H ① ② ③
C-28
④
⑤
⑥ ⑦
① ② ③ ④
Motor Frame Size Motor Type Series Output Power (W)
4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.) I: Induction Motor K: K Series (Example) 40: 40 W (1/19 HP)
⑤
Motor Shaft Type, Type of Pinion
A, AA: Round Shaft GN: GN Type Pinion Shaft GE: GE Type Pinion Shaft
⑥ ⑦
Power Supply Voltage H: Conduit Box Type
S: Three-Phase 220/230 VAC
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Protective Earth Terminal
Output Shaft Direction Output Shaft Direction L Shaft (Left) R Shaft (Right) ●Output gear shaft direction when seen from the protective earth terminal side. ●For motors equipped with a terminal box, the terminal box is on the opposite side.
◇Round Shaft Type
●World K Series 40 W (1/19 HP)
For the solid shaft type, either a right or left facing output shaft can be selected. Select the type that best suits the application.
Standard AC Motors
C-29
●Gearhead
5 GN 50 SA ① ① ② ③ ④
②
③
④
Gearhead Frame Size Type of Pinion Gear Ratio
2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.) GN: GN Type Pinion GE: GE Type Pinion (Example) 50: Gear Ratio of 50:1 10X denotes the decimal gearhead of gear ratio 10:1
Overview, Product Series
GN Type Pinion
SA: Long Life, Low Noise GN-S Gearhead RH: Right-Angle, Hollow Shaft Gearhead RAA: Right-Angle, Solid Shaft Gearhead
GE Type Pinion
SA: Long Life GE-S Gearhead RH: Right-Angle, Hollow Shaft Gearhead RAA: Right-Angle, Solid Shaft Gearhead
Constant Speed Motors
●BH Series
BH I 6 2 S M T - 100 RH ①
②③ ④ ⑤ ⑥ ⑦
⑧
Three-Phase Induction Motors Single-Phase Induction Motors
⑨
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
Series BH: BH Series Motor Type I: Induction Motor Motor Frame Size 6: 104 mm (4.09 in.) Output Power (W) (Example) 2: 200 W (1/4 HP) Power Supply Voltage S: Three-Phase 220/230 VAC M: Power Off Activated Type Electromagnetic Brake T: Terminal Box Type Blank: Cable Type Gear Ratio, Motor Shaft Type A: Round Shaft Type Number: Gear Ratio of Combination Type
⑨
Type of Gearhead (Combination type only)
RH: Right-Angle, Hollow Shaft Type RA: Right-Angle, Solid Shaft Type Blank: Parallel Shaft Type
Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-29
C-30 Three-Phase Induction Motors ■General Specifications ●K S Series ◇Right-Angle Geared Type Induction Motors
Electromagnetic Brake Motors
High-Efficiency K S Series
Item Insulation Resistance
Specifications 100 MΩ or more when a 500 VDC megger is applied between the motor windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Voltage
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the motor windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise
Temperature rise of windings is 80˚C (144˚F) or less measured by the resistance change method after rated load continuous operation under normal ambient temperature and humidity.
Thermal Class
130 (B)
Operating Ambient Temperature
0∼+40˚C (+32∼+104˚F) (non-freezing)
Operating Ambient Humidity 85% or less (non-condensing) 60 W (1/12 HP)
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
25 W (1/30 HP)
Degree of Protection
Note ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
◇Parallel Shaft Combination Type/Round Shaft Type Item Insulation Resistance
Specifications 100 MΩ or more when a 500 VDC megger is applied between the motor windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Voltage
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the motor windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise
A gearhead or equivalent heat sink (200 × 200 mm (7.87 × 7.87 in.), 5 mm (0.20 in.) thick, material: aluminum) is connected to the motor and the winding temperature rise is measured at 80˚C (144˚F) or less using the resistance change method after rated load continuous operation under normal ambient temperature and humidity.
Thermal Class
130 (B)
Operating Ambient Temperature
−10∼+40˚C (+14∼+104˚F) (non-freezing)
Operating Ambient Humidity 85% or less (non-condensing) Degree of Protection
40 W (1/19 HP)
60 W (1/12 HP)
Terminal Box Type: IP66 Refer to page C-24 for the materials and surface treatments. Lead Wire Type: IP20 Cable Type: IP40
Terminal Box Type: IP66 (Except for installation surface of round shaft type) Refer to page C-24 for the materials and surface treatments. Lead Wire Type: IP20 Cable Type: IP40
Note ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
●World K Series 90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
◇6 W (1/125 HP)∼90 W (1/8 HP) Type, 2-Pole/High-Speed Type Item Insulation Resistance
Specifications 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.
Dielectric Strength
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity.
Temperature Rise
Temperature rise of windings are 70˚C (126˚F) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity with connecting a gearhead or equivalent heat radiation plate✽.
Thermal Class
130 (B)
Overheat Protection
6 W (1/125 HP) type has impedance protection. Other Types Built-In thermal protector (automatic return type) Open: 130±5˚C (266±9˚F), Close: 82±15˚C (179.6±27˚F) Three-Phase 15 W (1/50 HP) Type Open: 130±5˚C (266±9˚F), Close: 90±15˚C (194±27˚F)
Ambient Temperature Ambient Humidity
−10∼+40˚C (+14∼+104˚F) (non-freezing) 85% or less (non-condensing)
Degree of Protection
Lead Wire Type: IP20 Lead wire type with electromagnetic brake 60 W (1/12 HP), 90 W (1/8 HP): IP40 Terminal Box Type, Conduit Box Type: IP54 (excluding the installation surface of the round shaft type)
✽ Heat radiation plate (Material: Aluminum)
Motor Type 6 W (1/125 HP) Type 15 W (1/50 HP) Type 25 W (1/30 HP) Type 40 W (1/19 HP) Type (2-Pole, High-Speed 5IK60 Type) 60 W (1/12 HP), 90 W (1/8 HP), 150 W (1/5 HP) Type
C-30
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Size: mm (in.) Thickness: mm (in.) 115×115 (4.53×4.53) 125×125 (4.92×4.92) 135×135 (5.31×5.31) 5 (0.20) 165×165 (6.50×6.50) 200×200 (7.87×7.87)
Standard AC Motors
C-31
●BH Series Item Insulation Resistance
Specifications 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.
Dielectric Strength
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity.
Temperature Rise
Temperature rise of windings are 70˚C (126˚F) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity with connecting a gearhead or equivalent heat radiation plate✽.
Thermal Class Overheat Protection Ambient Temperature Ambient Humidity
130 (B) Built-in thermal protector (automatic return type) Open: 150±5˚C, (302±9˚F), Close: 96±15˚C (204.8±27˚F) −10∼+40˚C (+14∼+104˚F) (non-freezing) 85% or less (non-condensing)
Degree of Protection
Cable Type: IP40 Terminal Box Type: IP54 (excluding the installation surface of the round shaft type)
✽ Heat radiation plate: 230×230 mm (9.06×9.06 in.), Thickness: 5 mm (0.20 in.) (Material: Aluminum)
Overview, Product Series Constant Speed Motors Three-Phase Induction Motors Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-31
C-32 Three-Phase Induction Motors Induction Motors
60 W (1/12 HP) Induction Motors
Electromagnetic Brake Motors
□90 mm (□3.54 in.) Parallel Shaft Combination Type/Round Shaft Type
Product Name Upper Level: Combination Type Lower Level: Round Shaft Type Terminal Box Type
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
60 W (1/12 HP)
90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Output
Lead Wire Type
5IK60VEST2-□A 5IK60VA-EST2
5IK60VES-□A 5IK60VA-ES
Voltage
Frequency
Current
Hz 50 60 50 60
A 0.37 0.33 0.38 0.33
W
HP
VAC
60
1/12
Three-Phase 220
60
1/12
Three-Phase 230
Starting Torque mN•m 600 500 600 500
Rated Torque
oz-in 85 71 85 71
mN•m 410 350 410 350
oz-in 58 49 58 49
r/min 1400 1670 1400 1670
■Product Line Combination Type
Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed and they are also available separately. In addition, the gearhead can be removed and the assembly position can be changed in 90˚ increments.
●Combination Type with Parallel Shaft Type
Product Name
Terminal Box Type
5IK60VEST2-□A
Lead Wire 5IK60VES-□A Type
Gearhead
Motor
Combination Type
=
+
●Round Shaft Type
Gear Ratio 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60, 75, 90, 100 120, 150, 180 250, 300 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60, 75, 90, 100 120, 150, 180 250, 300
List Price $250.00 $261.00 $271.00 $305.00 $228.00 $239.00 $249.00 $283.00
Type Terminal Box Type Lead Wire Type
Product Name 5IK60VA-EST2 5IK60VA-ES
List Price $138.00 $116.00
The following items are included with each product. Motor, Operating Manual
The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
■Permissible Torque on Combination Types ●50 Hz Product Name
Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min Gear Ratio
5IK60VEST2-□A, 5IK60VES-□A
300
250
200
166
100
83
60
50
41
30
25
20
16.6
5 1.8 15.9
6 2.2 19.4
7.5 2.8 24
9 12.5 15 3.3 4.6 5.5 29 40 48
120
18 6.6 58
25 8.8 77
30 10.6 93
36 12.7 112
50 17.6 155
60 21.2 187
75 26.4 230
90 30 260
●60 Hz Product Name
15
12.5
10
8.3
6
5
100 120 150 180 250 300 30 30 30 30 30 30 260 260 260 260 260 260 Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min Gear Ratio
5IK60VEST2-□A, 5IK60VES-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
5 1.6 14.1
6 1.9 16.8
7.5 2.4 21
9 12.5 15 2.8 3.9 4.7 24 34 41
18 5.7 50
25 7.5 66
30 9.0 79
36 10.8 95
50 15.1 133
60 18.1 160
75 22.6 200
20
18
●A number indicating the gear ratio is entered where the box □ is located within the product name. ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
15
12
10
7.2
6
90 100 120 150 180 250 300 27.1 30 30 30 30 30 30 230 260 260 260 260 260 260
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load.
C-32
Rated Speed
●The values in the table are characteristics for the motor only. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
25 W (1/30 HP)
40 W (1/19 HP)
Lead Wire Type
■Specifications – Continuous Rating
High-Efficiency K S Series 60 W (1/12 HP)
Terminal Box Type
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors ■Permissible Radial Load and Permissible Axial Load
■Permissible Inertia J of Combination Types
➜
➜
Page C-17
■Dimensions
C-33
Page C-19 Overview, Product Series
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name.
Constant Speed Motors Three-Phase Induction Motors
●Combination Type ◇Terminal Box Type Gear Ratio
5IK60VEST2-□A
5IK60VGVH-EST2
5GVH□A
5∼18 25∼100 120∼300
A
Mass kg lb.
2D CAD
4.1 9.0
A1395A A1395B A1395C
Single-Phase Induction Motors Reversible Motors
76.5 (3.01)
]
No. 12-24 UNC 12 (0.47) Deep
Electromagnetic Brake Motors +0.381 0 +0.015 0.106 0.000
2.692
(
)
Clutch & Brake Motors
0.5
± ϕ104 ±0.02) 9 (ϕ4.0
A-A
Low-Speed Synchronous Motors
0
A
in. 1.77 2.28 2.52
4.763−0.025 0.0000 (0.1875−0.0010 )
25 (0.98)
[
mm 45 58 64
90 (3.54)
23 (0.91)
34 (1.34)
L2 in. 1.44 1.95 2.19
0.0000 (ϕ1.5354−0.0010 )
L1
ϕ89 (ϕ3.50)
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
0 ϕ19.050−0.013 0.0000 ϕ0.7500−0.0005 (3/4”)
18±0.5 0 ϕ39−0.025 (0.71±0.02)
30 max. (1.18 max.)
L1 mm 36.6 49.6 55.6
(0.1875+0.0016 0.0000)
Gearhead Product Name
4.763+0.040 0
Motor Product Name
39 (1.54)
Product Name
7.5 (0.30) 105 (4.13)
L2
4×ϕ8.5 (ϕ0.335) Thru 90 (3.54)
5 (0.20) 42±1 (1.65±0.04)
25±0.2 (0.984±0.008)
0
4.763−0.025 0.0000 (0.1875−0.0010 )
Torque Motors Watertight, Dust-Resistant Motors
Parallel Key (Included)
◇Lead Wire Type
A
90 (3.54) No.12-24 UNC 12 (0.47) Deep
(
0.0000 0.1875−0.0010
Technical Support
)
+0.381 0 +0.015 0.106 0.000
Brake Pack
2.692
(
) Accessories
4×ϕ8.5 (ϕ0.335) Thru A-A
Installation
.5 4±0 ) ϕ10 ±0.02
.09 (ϕ4
22.5°
www.orientalmotor.com
0
4.763−0.025
Parallel Key (Included)
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
CAD Data Manuals
(0.984±0.008)
Linear Heads
+0.040
25±0.2
0.0000 [ϕ0.7500−0.0005 (3/4”)]
A1393A A1393B A1393C
0
0
ϕ19.050−0.013
3.8 8.4
Right-Angle Gearheads
4.763 0 (0.1875+0.0016 0.0000)
34 (1.34) 25 (0.98) A
in. 1.77 2.28 2.52
2D CAD
5 max. (0.20 max.)
16.5 (0.65)
5 (0.20)
42±1 (1.65±0.04)
mm 45 58 64
Mass kg lb.
0.0000 (0.1875−0.0010 )
7.5 (0.30)
L
L
4.763−0.025
5GVH□A
5∼18 25∼100 120∼300
5IK60VGVH-ES
105 (4.13)
ϕ89 (ϕ3.50)
Gear Ratio
90 (3.54)
5IK60VES-□A
Gearhead Product Name
0.0000 (ϕ1.5354−0.0010 )
Motor Product Name
18±0.5 0 ϕ39−0.025 (0.71±0.02)
Product Name
Protective Earth Terminal M4 21.5 (0.85) Detail Drawing of Protective Earth Terminal
TEL: (800) 468-3982 E-mail: [email protected]
C-33
C-34 Three-Phase Induction Motors ●Round Shaft Type ◇Terminal Box Type
15 W (1/150 HP)
60 W (1/12 HP)
46 (1.81) 0.0000 (ϕ3.2677−0.0014 )
0
90 (3.54)
0
90 (3.54) 4×ϕ6.5 (ϕ0.256) Thru .5
)
4±0 ϕ10 9±0.02) 0 . 4 ϕ ( 90 (3.54)
(
40 W (1/19 HP)
ϕ89 (ϕ3.50)
25 W (1/30 HP)
7.5 (0.30)
37±1 (1.46±0.04) 2 (0.08)
0
105 (4.13)
0.0000 (ϕ0.4724−0.0007 )
5IK60VA-ES Mass: 2.3 kg (5.1 lb.) A1226
ϕ12−0.018
6W (1/125 HP)
◇Lead Wire Type
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
Induction Motors
4×ϕ6.5 (ϕ0.256) Thru 90 (3.54)
2 (0.08) 37±1 (1.46±0.04)
7.5 (0.30) 105 (4.13)
100 W (1/8 HP)
±0.5
ϕ104 2) ±0.0 (ϕ4.09
ϕ83−0.035
60 W (1/12 HP)
0.0000 (ϕ0.4724−0.0007 )
Applicable Cable Size Outer Diameter ϕ8∼ϕ13 mm (ϕ0.31∼ϕ0.51 in.)
High-Efficiency K S Series
76.5 (3.01)
ϕ12−0.018
23 (0.91)
Electromagnetic Brake Motors
1 (0.04)
76.5 (3.01)
ϕ89 (ϕ3.50)
Induction Motors
5IK60VA-EST2 Mass: 2.6 kg (5.7 lb.) A1315 30 max. (1.18 max.)
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
22.5°
5 max. (0.20 max.)
90 W (1/8 HP)
16.5 (0.65)
BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Protective Earth Terminal M4 21.5 (0.85) Detail Drawing of Protective Earth Terminal
C-34
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-35
Induction Motors
100 W (1/8 HP) □90 mm (□3.54 in.) Right-Angle Geared Type
Terminal Box Type
Lead Wire Type
Constant Speed Motors
■Specifications – Continuous Rating Product Name Upper Level: Terminal Box Type Lower Level: Lead Wire Type Hollow Shaft Type 5IK100VEST2-GHR□ 5IK100VES-GHR□
Speed r/min
50 Hz 60 Hz
Rated Torque Upper Level: N·m Lower Level: lb-in
50 Hz
Starting Torque Upper Level: N·m Lower Level: lb-in
50 Hz
60 Hz
60 Hz
Permissible Load Inertia Upper Level: J×10-4 kg·m2 Lower Level: oz-in2
Hollow Shaft✽
Solid Shaft
Solid Shaft Type (L shaft)
5IK100VEST2-GAR□ 5IK100VES-GAR□
Gear Ratio
Permissible Radial Load Upper Level: N Lower Level: lb.
Output
Solid Shaft Type (R shaft)
Instantaneous Stop
5IK100VEST2-GAL□ 5IK100VES-GAL□ 7.5 200 240 3.3 29 3.0 26 4.2 37 3.4 30 100 550 61.9 340
10 150 180 4.5 39 4.2 37 5.7 50 4.6 40 190 1040 110 600
15 100 120 7.0 61 6.4 56 8.8 77 7.1 62 420 2300 248 1360
20 75 90 9.4 83 8.7 76 11.8 104 9.6 84 700 3800 440 2400 1200 270 1100 240 900 200 1000 220
10 mm (0.39 in.) from Installation Surface 20 mm (0.79 in.) from Installation Surface 10 mm (0.39 in.) from End of Output Shaft 20 mm (0.79 in.) from End of Output Shaft
25 60 72 11.8 104 10.9 96 14.8 130 12.0 106 1100 6000 688 3800
✽The radial load at each distance can be calculated with a formula. ➜ Page C-16 ●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 80 Hz or less when driving in combination with the inverter. Note ●Do not perform instantaneous bi-directional operations.
●Hollow Shaft Type
Terminal Box 5IK100VEST2-GHR□ Type
Lead Wire Type
5IK100VES-GHR□
Frequency
Current
Hz 50 60 50 60
A 0.55 0.52 0.57 0.52
W
HP
VAC
1/8
Three-Phase 220
100
1/8
Three-Phase 230
30 50 60 14.3 126 13.2 116 17.9 158 14.5 128 1600 8800 990 5400
40 50 60 75 100 120 150 200 240 37 30 25 20 15 12.5 10 7.5 6.2 45 36 30 24 18 15 12 9 7.5 19.2 24.0 28.9 36.2 48.4 58.2 67.9 70 70 169 210 250 320 420 510 600 610 610 17.7 22.2 26.7 33.4 44.7 53.7 62.7 70 70 156 196 230 290 390 470 550 610 610 24.0 30.0 36.1 45.2 60.4 70 70 70 70 210 260 310 400 530 610 610 610 610 19.5 24.4 29.4 36.8 49.2 59.1 69.0 70 70 172 210 260 320 430 520 610 610 610 2800 4500 6000 8000 12000 17000 25000 25000 25000 15300 25000 33000 44000 66000 93000 137000 137000 137000 1760 2750 2750 2750 2750 2750 2750 2750 2750 9600 15000 15000 15000 15000 15000 15000 15000 15000 2200 490 2000 450 1700 380 1850 410 350 78
Three-Phase Induction Motors Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
◇Load Position ●Hollow Shaft Type
●Solid Shaft Type
Radial Load
Brake Pack
Radial Load Axial Load
Axial Load 10 mm (0.39 in.) 20 mm (0.79 in.)
10 mm (0.39 in.) 20 mm (0.79 in.) Distance from Installation Surface
■Product Line Product Name
Voltage
100
Permissible Axial Load Upper Level: N Lower Level: lb.
Type
Overview, Product Series
Accessories
Installation
Distance from Output Shaft End
●Solid Shaft Type Gear Ratio 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240
List Price $352.00 $336.00 $340.00 $347.00 $380.00 $407.00 $475.00 $329.00 $314.00 $317.00 $325.00 $358.00 $385.00 $453.00
Type
Product Name
Terminal Box 5IK100VEST2-GAR□ Type 5IK100VEST2-GAL□
Lead Wire Type
5IK100VES-GAR□ 5IK100VES-GAL□
Gear Ratio 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240
The following items are included with each product.
The following items are included with each product.
Geared Motor, Installation Screws, Parallel Key, Safety Cover, Operating Manual
Geared Motor, Installation Screws, Parallel Key, Operating Manual
List Price $317.00 $302.00 $306.00 $312.00 $347.00 $374.00 $440.00 $295.00 $280.00 $284.00 $290.00 $325.00 $352.00 $418.00
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-35
C-36 Three-Phase Induction Motors ■Dimensions
Unit = mm (in.)
● Installation screws are included. Dimensions for installation screws➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name. Induction Motors
●Terminal Box Type ◇Hollow Shaft Type 5 (0.20) 4 (0.16) +0.21 0
(ϕ1.0315+0.0083 0.0000)
76.5 (3.01) 0 ϕ58−0.046
30 max. (1.18 max.)
0.0000 (ϕ2.2835−0.0018 )
A
A
21 (0.83)
4×ϕ8.5 (ϕ0.335) Thru
ϕ62 (ϕ2.44)
0 8−0.036
15 (0.59)
60 W (1/12 HP)
98 (3.86)
0.0000 (0.3150−0.0014 )
21 (0.83)
40 W (1/19 HP)
(0.3150+0.0016 0.0000)
37 (1.46)
25 W (1/30 HP)
131.6 (5.18) 124 (4.88) 45.5 (1.79) 70 (2.76) 37 +0.040 (1.46) 8 0
ϕ89 (ϕ3.50)
37 (1.46) 28.3 (1.11)
39 (1.54) 90 (3.54)
Safety Cover (Included)
0
40−0.3
0
7−0.090 0.0000 (0.2756−0.0035 )
10 (0.39)
0.000 (1.575−0.012 )
23 (0.91)
260 (10.24) 76.5 (3.01) 49 (1.93)
6W (1/125 HP)
90 W (1/8 HP)
Safety Cover (Included)
Parallel Key (Included)
◇Solid Shaft Type (R shaft) A1319
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
0
18.5−0.1
0
6−0.030
0.000 0.728−0.004
(
0.0000 (0.2362−0.0012 )
Parallel Key (Included)
)
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
A
M6×12 (0.47) Deep
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
30 max. (1.18 max.)
260 (10.24)
ϕ89 (ϕ3.50)
A
131.6 (5.18) 124 (4.88) 45.5 (1.79) 70 (2.76) 37 (1.46) 24.5 (0.96)
37 (1.46)
0
0.0000 (ϕ2.2835−0.0018 )
ϕ58−0.046
0
5 (0.20) 4 (0.16) 32 (1.26)
0.0000 (ϕ0.8661−0.0008 )
48±1 (1.89±0.04) 40±0.5 (1.57±0.02)
ϕ22−0.021
98 (3.86) 76.5 (3.01) 49(1.93)
37 (1.46)
90 (3.54)
39 (1.54)
4 (0.16)
76.5 (3.01)
23 (0.91)
32±0.2 (1.260±0.008)
0
0.0000
6−0.030 (0.2362−0.0012)
5IK100VEST2-GAR□ Mass: 7.1 kg (15.6 lb.)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
C-36
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
0.0000 (ϕ2.2835−0.0018 )
ϕ26.2
+0.033 0
ϕ40 (ϕ1.57)
ϕ58−0.046
A-A
Induction Motors
BH Series 200 W (1/4 HP)
ϕ40 (ϕ1.57)
5 (0.20) 4 (0.16)
0
30 (1.18) 15 (0.59) 1.35 (0.05)
ϕ25
100 W (1/8 HP)
15 W (1/150 HP)
A1318
(ϕ0.9843+0.0013 0.0000)
+0.033 0
30 (1.18) 15 (0.59) 1.35 (0.05)
108 (4.25)
ϕ25
60 W (1/12 HP)
ϕ26.2
+0.21 0
High-Efficiency K S Series
(ϕ0.9843+0.0013 0.0000)
5IK100VEST2-GHR□ Mass: 7.1 kg (15.6 lb.)
(ϕ1.0315+0.0083 0.0000)
Electromagnetic Brake Motors
4×ϕ8.5 (ϕ0.335) Thru
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-37
◇Solid Shaft Type (L shaft) A1320 0.0000
Mass: 7.1 kg (15.6 lb.)
6−0.030 (0.2362−0.0012)
5IK100VEST2-GAL□
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
0
32±0.2 (1.260±0.008)
0
6−0.030
(
0.0000 (0.2362−0.0012 )
Parallel Key (Included) 30 max. (1.18 max.)
0 18.5−0.1 0.000 0.728−0.004
Overview, Product Series
) Constant Speed Motors
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
76.5 (3.01)
Three-Phase Induction Motors Single-Phase Induction Motors
4 (0.16) Reversible Motors
39 (1.54)
0
0.0000 (ϕ0.8661−0.0008 )
0
90 (3.54)
37 (1.46) 4×ϕ8.5 (ϕ0.335) Thru
5 (0.20) 4 (0.16) 32 (1.26)
98 (3.86) 76.5 (3.01) 49 (1.93)
A
37 (1.46)
ϕ89 (ϕ3.50)
ϕ22−0.021
0.0000 (ϕ2.2835−0.0018 )
48±1 (1.89±0.04) 40±0.5 (1.57±0.02)
131.6 (5.18) 124 (4.88) 70 (2.76) 45.5 (1.79) 37 (1.46) 24.5 (0.96)
ϕ58−0.046
23 (0.91)
260 (10.24)
A
Clutch & Brake Motors Low-Speed Synchronous Motors
M6×12 (0.47) Deep Torque Motors
●Lead Wire Type ◇Hollow Shaft Type
98 (3.86) 49 (1.93)
21 (0.83)
37 (1.46)
37 (1.46)
Right-Angle Gearheads
+0.040 8 0
(0.3150+0.0016 0.0000)
Linear Heads
A
Brake Pack
A Accessories
4×ϕ8.5 (ϕ0.335) Thru
Safety Cover (Included)
5 max. (0.20 max.)
260 (10.24)
124 (4.88) 70 (2.76)
45.5 (1.79)
90 (3.54)
21 (0.83)
Watertight, Dust-Resistant Motors
A1277
ϕ89 (ϕ3.50)
Mass: 6.8 kg (15.0 lb.)
37 (1.46) 28.3 (1.11)
5IK100VES-GHR□
Electromagnetic Brake Motors
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
22.5°
Installation 0
) (
ϕ40 (ϕ1.57)
)
30 (1.18) 15 (0.59) 1.35 (0.05)
(
108 (4.25)
ϕ58−0.046 0.0000 (ϕ2.2835−0.0018 )
ϕ62 (ϕ2.44)
8−0.036
0
40−0.3
0
15 (0.59)
A-A
5 (0.20) 4 (0.16)
ϕ40 (ϕ1.57)
0
7−0.09
116 (4.57) 0.0000
ϕ58−0.046 (ϕ2.2835−0.0018) 0
0.0000 (0.2756−0.0035 )
10 (0.39)
0.000 (1.575−0.012 )
0.0000 (0.3150−0.0014 )
5 (0.20) 4 (0.16)
ϕ25
16.5 (0.65)
+0.033 0 +0.0013 ϕ0.9843 0.0000 +0.21 ϕ26.2 0 +0.0083 ϕ1.0315 0.0000
+0.033 0
(ϕ0.9843+0.0013 0.0000)
30 (1.18) 15 (0.59) 1.35 (0.05)
ϕ25
+0.21 0
ϕ26.2
(ϕ1.0315+0.0083 0.0000)
Protective Earth Terminal M4
Safety Cover (Included)
CAD Data Manuals
Parallel Key (Included)
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-37
C-38 Three-Phase Induction Motors ◇Solid Shaft Type (R shaft)
37 (1.46)
16.5 (0.65)
0
6−0.030
32±0.2 (1.260±0.008)
0.0000 (0.2362−0.0012 )
0
Protective Earth Terminal M4
0
18.5−0.1
0
6−0.030
0.000 (0.728−0.004 )
0.0000 (0.2362−0.0012 )
A-A
Parallel Key (Included)
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
116 (4.57)
◇Solid Shaft Type (L shaft) A1279
0
90 (3.54) 5 max. (0.20 max.)
M6×12 (0.47) Deep Protective Earth Terminal M4 22.5°
32±0.2 (1.260±0.008)
0
4×ϕ8.5 (ϕ0.335) Thru
16.5 (0.65)
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
A
6−0.030
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
4 (0.16)
A
37 (1.46)
ϕ89 (ϕ3.50)
BH Series 200 W (1/4 HP)
37 (1.46)
90 W (1/8 HP)
98 (3.86) 49 (1.93)
32 (1.26)
0.0000 (0.2362−0.0012 )
60 W (1/12 HP)
0
124 (4.88) 70 (2.76) 45.5 (1.79) 37 (1.46) 24.5 (0.96)
0.0000 (ϕ0.8661−0.0008 )
48±1 40±0.5 (1.57±0.02) (1.89±0.04) 5 (0.20) 4 (0.16)
260 (10.24)
ϕ22−0.021
5IK100VES-GAL□ Mass: 6.8 kg (15.0 lb.) 40 W (1/19 HP)
0.0000 (ϕ2.2835−0.0018 )
25 W (1/30 HP)
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
22.5°
ϕ58−0.046
15 W (1/150 HP)
4×ϕ8.5 (ϕ0.335) Thru
M6×12 (0.47) Deep
Induction Motors
6W (1/125 HP)
0.0000 (ϕ2.2835−0.0018 )
A
5 max. (0.20 max.)
60 W (1/12 HP)
260 (10.24)
124 (4.88) 70 (2.76) 45.5 (1.79) 37 (1.46) 24.5 (0.96)
37 (1.46)
High-Efficiency K S Series
0
A
90 (3.54)
Electromagnetic Brake Motors
ϕ22−0.021
32 (1.26)
ϕ58−0.046
Induction Motors
0.0000 (ϕ0.8661−0.0008 )
4 (0.16)
100 W (1/8 HP)
A1278
48±1 (1.89±0.04) 40±0.5 (1.57±0.02)
98 (3.86) 49 (1.93) 5 (0.20) 4 (0.16)
ϕ89 (ϕ3.50)
5IK100VES-GAR□ Mass: 6.8 kg (15.0 lb.)
0
18.5−0.1
0
6−0.030 0.0000 (0.2362−0.0012 )
Parallel Key (Included)
0.000 (0.728−0.004 )
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
116 (4.57)
C-38
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-39
Induction Motors
100 W (1/8 HP) □90 mm (□3.54 in.) Parallel Shaft Combination Type/Round Shaft Type
Terminal Box Type
Lead Wire Type
Constant Speed Motors
■Specifications – Continuous Rating Product Name Upper Level: Combination Type Lower Level: Round Shaft Type Terminal Box Type
Output
Lead Wire Type
5IK100VEST2-□A 5IK100VA-EST2
5IK100VES-□A 5IK100VA-ES
Voltage
Frequency
Current
Hz 50 60 50 60
A 0.55 0.48 0.57 0.48
W
HP
VAC
100
1/8
Three-Phase 220
100
1/8
Three-Phase 230
Starting Torque mN•m 850 700 850 700
Rated Torque
oz-in 120 99 120 99
mN•m 690 570 690 570
Rated Speed
oz-in 97 80 97 80
r/min 1400 1680 1400 1680
Reversible Motors
Electromagnetic Brake Motors
■Product Line
Clutch & Brake Motors
Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed and they are also available separately. In addition, the gearhead can be removed and the assembly position can be changed in 90˚ increments.
●Combination Type with Parallel Shaft Type
Product Name
Terminal Box Type
5IK100VEST2-□A
Lead Wire Type
5IK100VES-□A
Three-Phase Induction Motors Single-Phase Induction Motors
●The values in the table are characteristics for the motor only. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
Combination Type
Overview, Product Series
Gearhead
Motor
Combination Type
=
+
Torque Motors
●Round Shaft Type
Gear Ratio 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60 75, 90, 100, 120, 150, 180 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60 75, 90, 100, 120, 150, 180
List Price $269.00 $289.00 $299.00 $248.00 $268.00 $278.00
Type Terminal Box Type Lead Wire Type
Low-Speed Synchronous Motors
Product Name 5IK100VA-EST2 5IK100VA-ES
Watertight, Dust-Resistant Motors
List Price $156.00 $135.00
Right-Angle Gearheads
The following items are included with each product. Motor, Operating Manual
Linear Heads
The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
Brake Pack
■Permissible Torque on Combination Types
Accessories
●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Product Name
Speed r/min Gear Ratio
5IK100VEST2-□A, 5IK100VES-□A
300
250
200
166
120
100
83
60
50
41
30
25
20
16.6
15
12.5
10
8.3
5 3.1 27
6 3.7 32
7.5 4.7 41
9 5.6 49
12.5 7.8 69
15 9.3 82
18 10.7 94
25 14.8 130
30 17.8 157
36 21.4 189
50 29.7 260
60 35.6 310
75 40 350
90 40 350
100 40 350
120 40 350
150 40 350
180 40 350
●60 Hz
Installation
Unit: Upper Values: N·m/Lower Values: lb-in
Product Name
Speed r/min Gear Ratio
5IK100VEST2-□A, 5IK100VES-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
20
18
15
12
10
5 2.6 23
6 3.1 27
7.5 3.8 33
9 4.6 40
12.5 6.4 56
15 7.7 68
18 8.8 77
25 12.3 108
30 14.7 130
36 17.6 155
50 24.5 210
60 29.4 260
75 34.6 300
90 40 350
100 40 350
120 40 350
150 40 350
180 40 350
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load.
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-39
C-40 Three-Phase Induction Motors
Induction Motors
■Permissible Radial Load and Permissible Axial Load
■Permissible Inertia J of Combination Types
➜
➜
Page C-17
■Dimensions
Page C-19
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215 Electromagnetic ● The terminal box cable outlet can be rotated and affixed in 4 possible directions. Brake Motors ● A number indicating the gear ratio is entered where the box □ is located within the product name.
●Combination Type ◇Terminal Box Type
5IK100VEST2-□A
5IK100VGVR-EST2
5GVR□A
5∼15 18∼36 50∼180
Mass kg lb.
2D CAD
4.7 10.3
A1396A A1396B A1396C
76.5 (3.01)
7.5 (0.30)
25 W (1/30 HP)
120 (4.72)
L2
4.763+0.040 0
39 (1.54)
+0.381 0 +0.015 0.106 0.000
2.692
(
±0.5 ϕ104 ±0.02) 9 (ϕ4.0
)
25±0.2 (0.984±0.008)
4×ϕ8.5 (ϕ0.335) Thru 90 (3.54)
5 (0.20) 42±1 (1.65±0.04)
)
A-A
0
A
No. 12-24 UNC 12 (0.47) Deep
4.763−0.025
15 W (1/150 HP)
in. 1.77 2.28 2.76
0.0000 [ϕ0.7500−0.0005 (3/4”)]
0
A
0
ϕ19.050−0.013
mm 45 58 70
90 (3.54)
25 (0.98)
L2 in. 1.44 1.95 2.43
0.0000 (ϕ1.5354−0.0010 )
34 (1.34)
18±0.5
L1
23 (0.91)
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
ϕ89 (ϕ3.50)
6W (1/125 HP)
30 max. (1.18 max.)
mm 36.6 49.6 61.6
0
4.763−0.025 0.0000 (0.1875−0.0010 )
(
Gear Ratio
(0.1875+0.0016 0.0000)
Gearhead Product Name
0.0000 0.1875−0.0010
Motor Product Name
100 W (1/8 HP)
Induction Motors
L1
Product Name 60 W (1/12 HP)
ϕ39−0.025 (0.71±0.02)
High-Efficiency K S Series
Parallel Key (Included)
5IK100VES-□A
5IK100VGVR-ES
5GVR□A
5∼15 18∼36 50∼180
90 W (1/8 HP)
Mass kg lb.
2D CAD
4.4 9.7
A1394A A1394B A1394C
5 (0.20)
ϕ89 (ϕ3.50)
7.5 (0.30)
42±1 (1.65±0.04) 34 (1.34) 25 (0.98) A
0.0000 [ϕ0.7500−0.0005 (3/4”)]
0
4.763−0.025 0.0000 (0.1875−0.0010 )
90 (3.54)
+0.381 0
A-A
Parallel Key (Included) No.12-24 UNC 12 (0.47) Deep
2.692
(0.106+0.015 0.000)
4×ϕ8.5 (ϕ0.335) Thru
.5
4±0 ϕ10 9±0.02) .0 (ϕ4
16.5 (0.65)
A
0
ϕ19.050−0.013
25±0.2 (0.984±0.008)
0.0000 (ϕ1.5354−0.0010 )
L
18±0.5 0 ϕ39−0.025 (0.71±0.02)
120 (4.72) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
22.5° Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
C-40
in. 1.77 2.28 2.76
0
BH Series 200 W (1/4 HP)
L mm 45 58 70
+0.040 0
Gear Ratio
4.763
Gearhead Product Name
0.0000 (0.1875−0.0010 )
Motor Product Name
4.763−0.025
Product Name 60 W (1/12 HP)
(0.1875+0.0016 0.0000)
◇Lead Wire Type
90 (3.54)
40 W (1/19 HP)
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Protective Earth Terminal M4 5 max. (0.20 max.)
21.5 (0.85)
Detail Drawing of Protective Earth Terminal
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-41
●Round Shaft Type ◇Terminal Box Type 5IK100VA-EST2 Mass: 3.2 kg (7.0 lb.)
A1317
46 (1.81)
Overview, Product Series Constant Speed Motors
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
)
0
ϕ12−0.018
23 (0.91)
±0.5
ϕ104 2) ±0.0 (ϕ4.09
90 (3.54)
Three-Phase Induction Motors Single-Phase Induction Motors
(
ϕ89 (ϕ3.50)
Applicable Cable Size Outer Diameter ϕ8∼ϕ13 mm (ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
1 (0.04)
76.5 (3.01)
0.0000 (ϕ0.4724−0.0007 )
30 max. (1.18 max.)
7.5 (0.30) 120 (4.72)
4×ϕ6.5 (ϕ0.256) Thru 90 (3.54)
2 (0.08) 37±1 (1.46±0.04)
Reversible Motors
◇Lead Wire Type 5IK100VA-ES Mass: 2.9 kg (6.4 lb.)
Electromagnetic Brake Motors
90 (3.54)
Clutch & Brake Motors
4×ϕ6.5 (ϕ0.256) Thru
4 ϕ10 9±0.02) 0 (ϕ4. 90 (3.54)
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
16.5 (0.65)
Torque Motors
(
ϕ89 (ϕ3.50)
Low-Speed Synchronous Motors
5 ± 0.
)
0
7.5 (0.30)
37±1 (1.46±0.04) 2 (0.08)
ϕ12−0.018
120 (4.72)
0.0000 (ϕ0.4724−0.0007 )
A1228
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
22.5°
Watertight, Dust-Resistant Motors
Protective Earth Terminal M4 5 max. 21.5 (0.20 max.) (0.85)
Right-Angle Gearheads
Detail Drawing of Protective Earth Terminal Linear Heads
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-41
C-42 Three-Phase Induction Motors Electromagnetic Brake Type Motors
60 W (1/12 HP) Induction Motors
□90 mm (□3.54 in.) Parallel Shaft Combination Type/Round Shaft Type Terminal Box Type
Cable Type
Electromagnetic Brake Motors
High-Efficiency K S Series
■Specifications – Continuous Rating Product Name Upper Level: Combination Type Lower Level: Round Shaft Type
60 W (1/12 HP)
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
Terminal Box Type
Output
Cable Type
5IK60VESMT2-□A 5IK60VA-ESMT2
5IK60VESM-□A 5IK60VA-ESM
25 W (1/30 HP)
Frequency
Current
Hz 50 60 50 60
A 0.37 0.33 0.38 0.33
W
HP
VAC
60
1/12
Three-Phase 220
60
1/12
Three-Phase 230
Starting Torque mN•m 600 500 600 500
oz-in 85 71 85 71
Rated Torque mN•m 410 350 410 350
Rated Speed
oz-in 58 49 58 49
r/min 1400 1670 1400 1670
●The values in the table are characteristics for the motor only. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
●Electromagnetic Brake (Power off activated type) Voltage VAC
Product Name 15 W (1/150 HP)
Voltage
Terminal Box Type
Cable Type
5IK60VESMT2-□A 5IK60VA-ESMT2
5IK60VESM-□A 5IK60VA-ESM
Single-Phase 220 Single-Phase 230
Frequency Hz 50 60 50 60
Current A
Input W
Static Friction Torque mN•m oz-in
0.04
6
500
71
0.04
6
500
71
●The values in the table are characteristics for the motor only. 40 W (1/19 HP)
■Product Line
60 W (1/12 HP)
90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Combination Type
Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed and they are also available separately. In addition, the gearhead can be removed and the assembly position can be changed in 90˚ increments.
●Combination Type with Parallel Shaft Type
Product Name
Terminal 5IK60VESMT2-□A Box Type
Cable Type
5IK60VESM-□A
List Price $384.00 $395.00 $405.00 $439.00 $362.00 $373.00 $383.00 $417.00
Type Terminal Box Type Cable Type
Product Name 5IK60VA-ESMT2 5IK60VA-ESM
The following items are included with each product. Motor, Operating Manual
The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
●A number indicating the gear ratio is entered where the box □ is located within the product name.
C-42
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
=
●Round Shaft Type
Gear Ratio 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60, 75, 90, 100 120, 150, 180 250, 300 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60, 75, 90, 100 120, 150, 180 250, 300
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Gearhead
Motor
Combination Type
List Price $272.00 $250.00
+
Standard AC Motors
C-43
■Permissible Torque on Combination Types ●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min
Product Name
Gear Ratio 5IK60VESMT2-□A 5IK60VESM-□A
300
250
200
166
100
83
60
50
41
30
25
20
16.6
5 1.8 15.9
6 2.2 19.4
7.5 2.8 24
9 12.5 15 3.3 4.6 5.5 29 40 48
120
18 6.6 58
25 8.8 77
30 10.6 93
36 12.7 112
50 17.6 155
60 21.2 187
75 26.4 230
90 30 260
●60 Hz
15
12.5
10
8.3
6
5
100 120 150 180 250 300 30 30 30 30 30 30 260 260 260 260 260 260 Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min
Product Name
Gear Ratio 5IK60VESMT2-□A 5IK60VESM-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
20
5 1.6 14.1
6 1.9 16.8
7.5 2.4 21
9 12.5 15 2.8 3.9 4.7 24 34 41
18 5.7 50
25 7.5 66
30 9.0 79
36 10.8 95
50 15.1 133
60 18.1 160
75 22.6 200
90 27.1 230
18
15
12
10
7.2
100 120 150 180 250 300 30 30 30 30 30 30 260 260 260 260 260 260
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load. ●A number indicating the gear ratio is entered where the box □ is located within the product name.
■Permissible Radial Load and Permissible Axial Load
■Permissible Inertia J of Combination Types
➜
➜
Page C-17
Page C-19
■ Starting and Braking Characteristics (Reference values - motor only)
6
Overview, Product Series Constant Speed Motors Three-Phase Induction Motors Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
200 Three-Phase 50 Hz
Torque Motors
Three-Phase 60 Hz
Watertight, Dust-Resistant Motors
5 4 3 2
Braking Time Starting Time
Time [ms]
Overrun [Rotations]
150
Right-Angle Gearheads
100
Linear Heads
50
Overrun
Brake Pack
1 0
0
0.25
0
1
0.5
2
3
0.75
4 Inertia J
CAD Data Manuals
1
5
1.25 [×10-4 kg·m2] 6
7
Accessories
8 Installation
[oz-in2]
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-43
C-44 Three-Phase Induction Motors ■Dimensions
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name. Induction Motors
●Combination Type ◇Terminal Box Type
5IK60VESMT2-□A
5IK60VGVH-ESMT2
5GVH□A
5∼18 25∼100 120∼300
7.5 (0.30) 15 W (1/150 HP)
40 (1.57) ±0.5 ϕ104 ±0.02) 9 (ϕ4.0
42±1 (1.65±0.04)
(
)
0
4.763−0.025 0.0000 (0.1875−0.0010 )
Parallel Key (Included)
5GVH□A
5∼18 25∼100 120∼300
60 W (1/12 HP)
7.5 (0.30)
5 (0.20)
BH Series 200 W (1/4 HP)
42±1 (1.65±0.04) 34 (1.34) 25 (0.98)
ϕ88 (ϕ3.46)
A
5 max. (0.20 max.)
A
80 (3) 32.5 (1.28)
1000 (3.3 ft.)
2D CAD
4.5 9.9
A1397A A1397B A1397C
25±0.2 (0.984±0.008)
0.0000 [ϕ0.7500−0.0005 (3/4”)]
0
4.763−0.025 0.0000 (0.1875−0.0010 )
Parallel Key (Included)
No.12-24 UNC 12 (0.47) Deep
+0.381 0
(0.106+0.015 0.000) A-A
±0.5
ϕ104 ±0.02) 9 (ϕ4.0
27 (1.06)
Protective Earth Terminal M4
20 (0.79)
Detail Drawing of Protective Earth Terminal
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
2.692
90 (3.54)
4×ϕ8.5 (ϕ0.335) Thru
✽Motor Cable ϕ8 (ϕ0.31)
Mass kg lb.
0
ϕ19.050−0.013
0.0000 (ϕ1.5354−0.0010 )
L
18±0.5 0 ϕ39−0.025 (0.71±0.02)
149 (5.87)
90 W (1/8 HP)
in. 1.77 2.28 2.52
7.5 (0.30)
5IK60VGVH-ESM
mm 45 58 64
+0.040
Gear Ratio
0
5IK60VESM-□A
L
Gearhead Product Name
0.0000 (0.1875−0.0010 )
Motor Product Name
4.763 0 (0.1875+0.0016 0.0000)
◇Cable Type Product Name
C-44
+0.381 0 +0.015 0.106 0.000
2.692
A-A
25±0.2 (0.984±0.008)
4×ϕ8.5 (ϕ0.335) Thru 90 (3.54)
5 (0.20) L
149 (5.87)
40 W (1/19 HP)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
No. 12-24 UNC 12 (0.47) Deep
4.763−0.025
25 W (1/30 HP)
A1399A A1399B A1399C
0
A
4.8 10.6
90 (3.54)
6W (1/125 HP)
2D CAD
14.5 (0.57)
Induction Motors
ϕ88 (ϕ3.46)
A
Mass kg lb.
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
0.0000 [ϕ0.7500−0.0005 (3/4”)]
25 (0.98)
23 (0.91)
100 W (1/8 HP)
0
ϕ19.050−0.013
34 (1.34)
in. 1.77 2.28 2.52
90 (3.54)
72.5 (2.85)
0.0000 (ϕ1.5354−0.0010 )
76.5 (3.01) 30 max. (1.18 max.)
60 W (1/12 HP)
mm 45 58 64
0.0000 (0.1875−0.0010 )
Gear Ratio
+0.040
Gearhead Product Name
4.763 0 (0.1875+0.0016 0.0000)
Motor Product Name
18±0.5 0 ϕ39−0.025 (0.71±0.02)
High-Efficiency K S Series
L
Product Name
4.763−0.025
Electromagnetic Brake Motors
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-45
●Round Shaft Type ◇Terminal Box Type A1322 Applicable Cable Size Outer Diameter ϕ8∼ϕ13 mm (ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
Overview, Product Series
0
ϕ12−0.018
40 (1.57)
72.5 (2.85) 30 max. (1.18 max.) 23 (0.91)
76.5 (3.01)
Mass: 3.3 kg (7.3 lb.)
0.0000 (ϕ0.4724−0.0007 )
5IK60VA-ESMT2
Constant Speed Motors
.5
90 (3.54)
Three-Phase Induction Motors Single-Phase Induction Motors
(
ϕ88 (ϕ3.46)
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
)
4±0 ϕ10 9±0.02) 0 (ϕ4.
7.5 (0.30) 149 (5.87)
4×ϕ6.5 (ϕ0.256) Thru 90 (3.54)
2 (0.08) 37±1 (1.46±0.04)
Reversible Motors
◇Cable Type
Electromagnetic Brake Motors
Mass: 3.0 kg (6.6 lb.)
A1283
±0.5 ϕ104 .02) ±0 (ϕ4.09
20 (0.79)
Protective Earth Terminal M4
32.5 (1.28)
80 (3) 1000 (3.3 ft.)
4×ϕ6.5 (ϕ0.256) Thru
✽Motor Cable ϕ8 (ϕ0.31)
27 (1.06)
14.5 (0.57)
5 max. (0.20 max.)
(
90 (3.54)
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
ϕ88 (ϕ3.46)
7.5 (0.30)
90 (3.54)
)
0
Clutch & Brake Motors
(
7.5 (0.30)
37±1 (1.46±0.04) 2 (0.08)
ϕ12−0.018
149 (5.87)
0.0000 ϕ0.4724−0.0007
)
5IK60VA-ESM
Detail Drawing of Protective Earth Terminal
Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
✽Motor Cable Core 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-45
C-46 Three-Phase Induction Motors Electromagnetic Brake Type Motors
100 W (1/8 HP) Induction Motors
Electromagnetic Brake Motors
□90 mm (□3.54 in.) Right-Angle Geared Type Terminal Box Type
■Specifications – Continuous Rating
Hollow Shaft Type
60 W (1/12 HP)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
25 W (1/30 HP)
40 W (1/19 HP)
Solid Shaft Type (R shaft)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Solid Shaft Type (L shaft)
Gear Ratio Speed r/min
50 Hz 60 Hz
Rated Torque Upper Level: N•m Lower Level: lb-in
50 Hz
Starting Torque Upper Level: N•m Lower Level: lb-in
50 Hz
60 Hz
60 Hz
Permissible Load Inertia Upper Level: J×10-4 kg•m2 Lower Level: oz-in2
Hollow Shaft✽ Permissible Radial Load Upper Level: N Lower Level: lb. Solid Shaft
BH Series 200 W (1/4 HP)
Output
5IK100VESMT2-GHR□ 5IK100VESMT2-GAR□ 5IK100VESMT2-GAL□ 5IK100VESM-GHR□ 5IK100VESM-GAR□ 5IK100VESM-GAL□
60 W (1/12 HP)
90 W (1/8 HP)
Motor
Product Name Upper Level: Terminal Box Type Lower Level: Cable Type
High-Efficiency K S Series
100 W (1/8 HP)
Cable Type
Instantaneous Stop
7.5 200 240 3.3 29 3.0 26 4.2 37 3.4 30 100 550 61.9 340
10 150 180 4.5 39 4.2 37 5.7 50 4.6 40 190 1040 110 600
W
Voltage
Frequency Current
HP
VAC
100
1/8
Three-Phase 220
100
1/8
Three-Phase 230
15 100 120 7.0 61 6.4 56 8.8 77 7.1 62 420 2300 248 1360
10 mm (0.39 in.) from Installation Surface 20 mm (0.79 in.) from Installation Surface 10 mm (0.39 in.) from End of Output Shaft 20 mm (0.79 in.) from End of Output Shaft
20 75 90 9.4 83 8.7 76 11.8 104 9.6 84 700 3800 440 2400 1200 270 1100 240 900 200 1000 220
Permissible Axial Load Upper Level: N Lower Level: lb. ✽The radial load at each distance can be calculated with a formula. ➜ Page C-16 ●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 80 Hz or less when driving in combination with the inverter. Note ●Do not perform instantaneous bi-directional operations.
25 60 72 11.8 104 10.9 96 14.8 130 12.0 106 1100 6000 688 3800
Electromagnetic Brake (Power off activated type)
30 50 60 14.3 126 13.2 116 17.9 158 14.5 128 1600 8800 990 5400
Hz 50 60 50 60
A 0.55 0.52 0.57 0.52
Voltage VAC Single-Phase 220 Single-Phase 230
Hz 50 60 50 60
●Hollow Shaft Type
oz-in
0.04
6
500
71
0.04
6
500
71
Radial Load Axial Load
Axial Load 10 mm (0.39 in.) 20 mm (0.79 in.)
10 mm (0.39 in.) 20 mm (0.79 in.)
Distance from Output Shaft End
●A number indicating the gear ratio is entered where the box □ is located within the product name.
Page
mN•m
●Solid Shaft Type
Radial Load
Page C-52
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
W
◇Load Position
■Starting and Braking Characteristics (Reference values)
C-46
A
40 50 60 75 100 120 150 200 240 37 30 25 20 15 12.5 10 7.5 6.2 45 36 30 24 18 15 12 9 7.5 19.2 24.0 28.9 36.2 48.4 58.2 67.9 70 70 169 210 250 320 420 510 600 610 610 17.7 22.2 26.7 33.4 44.7 53.7 62.7 70 70 156 196 230 290 390 470 550 610 610 24.0 30.0 36.1 45.2 60.4 70 70 70 70 210 260 310 400 530 610 610 610 610 19.5 24.4 29.4 36.8 49.2 59.1 69.0 70 70 172 210 260 320 430 520 610 610 610 2800 4500 6000 8000 12000 17000 25000 25000 25000 15300 25000 33000 44000 66000 93000 137000 137000 137000 1760 2750 2750 2750 2750 2750 2750 2750 2750 9600 15000 15000 15000 15000 15000 15000 15000 15000 2200 490 2000 450 1700 380 1850 410 350 78
Distance from Installation Surface
➜
Static Friction Torque
Frequency Current Input
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-47
■Product Line ●Hollow Shaft Type Type
Product Name
Terminal Box Type 5IK100VESMT2-GHR□
Cable Type
5IK100VESM-GHR□
●Solid Shaft Type Gear Ratio 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240
List Price $484.00 $468.00 $472.00 $479.00 $512.00 $539.00 $607.00 $461.00 $446.00 $449.00 $457.00 $490.00 $517.00 $585.00
Type
Terminal Box Type
Cable Type
Product Name
5IK100VESMT2-GAR□ 5IK100VESMT2-GAL□
5IK100VESM-GAR□ 5IK100VESM-GAL□
Gear Ratio 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240
The following items are included with each product.
The following items are included with each product.
Geared Motor, Installation Screws, Parallel Key, Safety Cover, Operating Manual
Geared Motor, Installation Screws, Parallel Key, Operating Manual
List Price $449.00 $434.00 $438.00 $444.00 $479.00 $506.00 $572.00 $427.00 $412.00 $416.00 $422.00 $457.00 $484.00 $550.00
Overview, Product Series Constant Speed Motors Three-Phase Induction Motors Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-47
C-48 Three-Phase Induction Motors ■Dimensions
Unit = mm (in.)
● Installation screws are included. Dimensions for installation screws ➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name. Induction Motors
●Terminal Box Type ◇Hollow Shaft Type 5IK100VESMT2-GHR□ Mass: 7.7 kg (16.9 lb.)
0
5 (0.20) 4 (0.16)
ϕ58−0.046
)
0.0000 (ϕ2.2835−0.0018 )
+0.21 0 +0.0083 ϕ1.0315 0.0000
+0.033
ϕ40 (ϕ1.57)
(
30 (1.18) 15 (0.59) 1.35 (0.05)
ϕ26.2
(ϕ0.9843+0.0013 0.0000)
ϕ26.2 0 (ϕ1.0315+0.0083 0.0000) +0.033 ϕ25 0
+0.21
108 (4.25)
30 (1.18) 15 (0.59) 1.35 (0.05)
High-Efficiency K S Series 60 W (1/12 HP)
A1325
ϕ25 0 (ϕ0.9843+0.0013 0.0000)
Electromagnetic Brake Motors
5 (0.20) 4 (0.16)
100 W (1/8 HP) A-A 76.5 (3.01) 49 (1.93)
98 (3.86)
60 W (1/12 HP)
0
28.3 (1.11)
8
+0.040 0
(0.3150+0.0016 0.0000) A ϕ88 (ϕ3.46) A
4×ϕ8.5 (ϕ0.335) Thru
0
7−0.090
10 (0.39)
0.0000 (0.2756−0.0035 )
Safety Cover (Included)
Parallel Key (Included)
◇Solid Shaft Type (R shaft) 5IK100VESMT2-GAR□ Mass: 7.7 kg (16.9 lb.) 0.0000
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
A1326
0
32±0.2 (1.260±0.008)
0
18.5−0.1
0
6−0.030
0.000 (0.728−0.004 )
0.0000 (0.2362−0.0012 )
Parallel Key (Included)
A-A
30 max. (1.18 max.)
0.0000
) (
M6×12 (0.47) Deep
C-48
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
124 (4.88) 70 (2.76) 37 (1.46)
24.5 (0.96)
ϕ88 (ϕ3.46)
A
45.5 (1.79)
37 (1.46)
A
304 (11.97)
0
40±0.5 5 (0.20) (1.57±0.02) 4 (0.16) 32 (1.26)
76.5 (3.01)
37 (1.46)
90 (3.54)
40 (1.57)
76.5 (3.01) 49 (1.93)
48±1 (1.89±0.04)
0.0000 ϕ0.8661−0.0008
98 (3.86)
0 ϕ22−0.021
4 (0.16) Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
ϕ58−0.046 (ϕ2.2835−0.0018)
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
23 (0.91)
BH Series 200 W (1/4 HP)
0
40−0.3 0.000 (1.575−0.012 )
6−0.030 (0.2362−0.0012)
90 W (1/8 HP)
21 (0.83)
37 (1.46)
37 (1.46) 37 (1.46)
90 (3.54) 21 (0.83) ϕ62 (ϕ2.44)
8−0.036
40 W (1/19 HP)
Safety Cover (Included)
0.0000 (0.3150−0.0014 )
25 W (1/30 HP)
0
124 (4.88) 70 (2.76)
45.5 (1.79)
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
15 (0.59)
15 W (1/150 HP)
0.0000
ϕ58−0.046 (ϕ2.2835−0.0018) 304 (11.97)
40 (1.57)
6W (1/125 HP)
76.5 (3.01)
23 (0.91)
Induction Motors
30 max. (1.18 max.)
ϕ40 (ϕ1.57)
4×ϕ8.5 (ϕ0.335) Thru
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-49
◇Solid Shaft Type (L shaft) A1327
0.0000
Mass: 7.7 kg (16.9 lb.)
6−0.030 (0.2362−0.0012)
5IK100VESMT2-GAL□
76.5 (3.01)
0
18.5−0.1
0
6−0.030
0
32±0.2 (1.260±0.008)
Overview, Product Series Constant Speed Motors
0.000 (0.728−0.004 )
0.0000 (0.2362−0.0012 )
30 max. (1.18 max.) Parallel Key (Included)
Three-Phase Induction Motors
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
4×ϕ8.5 (ϕ0.335) Thru
A
A
76.5 (3.01) 49 (1.93)
4 (0.16) Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors
90 (3.54)
0.0000 (ϕ0.8661−0.0008 )
0
37 (1.46)
5 (0.20) 4 (0.16) 32 (1.26)
37 (1.46)
ϕ88 (ϕ3.46)
0
ϕ58−0.046
24.5 (0.96)
ϕ22−0.021
23 (0.91)
37 (1.46)
0.0000 (ϕ2.2835−0.0018 )
40±0.5 (1.57±0.02)
124 (4.88) 70 (2.76) 45.5 (1.79)
98 (3.86)
40 (1.57)
48±1 (1.89±0.04)
304 (11.97)
Low-Speed Synchronous Motors
M6×12 (0.47) Deep
Torque Motors
●Cable Type ◇Hollow Shaft Type 5IK100VESM-GHR□
Mass: 7.5 kg (16.5 lb.)
A1291
98 (3.86) 49 (1.93)
304 (11.97)
21 (0.83) 28.3 (1.11)
21 (0.83)
Watertight, Dust-Resistant Motors
ϕ88 (ϕ3.46)
90 (3.54)
37 (1.46) 37 (1.46)
A
Accessories
5 (0.20) 4 (0.16)
)
0 ϕ58−0.046
0.0000 (ϕ2.2835−0.0018 )
32.5 (1.28)
20 (0.79)
(
0.0000
5 (0.20) 4 (0.16)
ϕ26.2
Installation
✽Motor Cable ϕ8 (ϕ0.31) ✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
+0.21 0 +0.0083 ϕ1.0315 0.0000
ϕ40 (ϕ1.57)
Brake Pack
Protective Earth Terminal M4 ϕ40 (ϕ1.57)
0 ϕ58−0.046
(
7.5 (0.30)
0.0000 ϕ2.2835−0.0018
)
0
7−0.09
0.0000 (0.2756−0.0035 )
10 (0.39)
0
15 (0.59)
0
40−0.3 0.000 (1.575−0.012 )
Linear Heads
A
14.5 (0.57) +0.033 0
30 (1.18) 15 (0.59) 1.35 (0.05)
A-A ϕ62 (ϕ2.44)
4×ϕ8.5 (ϕ0.335) Thru
(0.3150 +0.0016 0.0000)
80 (3) 1000 (3.3 ft.)
(ϕ0.9843+0.0013 0.0000)
5 max. (0.20 max.)
108 (4.25)
ϕ25
) (
30 (1.18) 15 (0.59) 1.35 (0.05)
27 (1.06)
8−0.036 (0.3150−0.0014)
)
ϕ26.2
+0.21 0 +0.0083 ϕ1.0315 0.0000 +0.033 ϕ25 0 +0.0013 ϕ0.9843 0.0000
(
Safety Cover (Included)
Right-Angle Gearheads
124 (4.88) 45.5 (1.79) 70 (2.76) 37 +0.040 (1.46) 8 0
Safety Cover (Included) CAD Data Manuals
www.orientalmotor.com
Parallel Key (Included) Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-49
C-50 Three-Phase Induction Motors ◇Solid Shaft Type (R shaft)
15 W (1/150 HP)
0.0000 ϕ2.2835−0.0018
32.5 (1.28) ✽Motor Cable ϕ8 (ϕ0.31)
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22 0.000
18.5−0.1 (0.728−0.004) 0
0
6−0.030 0.0000 (0.2362−0.0012 )
Parallel Key (Included)
80 (3) 1000 (3.3 ft.)
(
0.0000
32±0.2 (1.260±0.008)
0 6−0.030
(
0
0.0000 0.2362−0.0012
Induction Motors
4×ϕ8.5 (ϕ0.335) Thru
0 ϕ58−0.046
27 (1.06)
)
100 W (1/8 HP)
5 max. (0.20 max.)
14.5 (0.57)
60 W (1/12 HP)
)
A ϕ22−0.021 (ϕ0.8661−0.0008)
High-Efficiency K S Series
25 W (1/30 HP)
A
90 (3.54)
Electromagnetic Brake Motors
304 (11.97) 124 (4.88) 45.5 (1.79) 70 (2.76) 37 (1.46) 24.5 (0.96)
ϕ88 (ϕ3.46)
32 (1.26)
48±1 (1.89±0.04) 40±0.5 (1.57±0.02) M6×12 (0.47) Deep
20 (0.79)
Induction Motors
A1292
37 (1.46)
98 (3.86) 49 (1.93) 5 (0.20) 4 (0.16)
4 (0.16)
6W (1/125 HP)
Mass: 7.5 kg (16.5 lb.)
37 (1.46)
5IK100VESM-GAR□
A-A Protective Earth Terminal M4
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
7.5 (0.30)
◇Solid Shaft Type (L shaft) A1293
48±1 (1.89±0.04) 40±0.5 (1.57±0.02) 5 (0.20) 4 (0.16) 32 (1.26)
M6×12 (0.47) Deep
27 (1.06)
(
Protective Earth Terminal M4
20 (0.79)
7.5 (0.30)
(
0.0000
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
0.0000 ϕ0.8661−0.0008
✽Motor Cable ϕ8 (ϕ0.31)
0
80 (3) 1000 (3.3 ft.)
0 ϕ22−0.021
32.5 (1.28)
)
A ϕ58−0.046 (ϕ2.2835−0.0018)
37 (1.46)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
A
37 (1.46)
BH Series 200 W (1/4 HP)
ϕ88 (ϕ3.46)
90 W (1/8 HP)
90 (3.54)
4×ϕ8.5 (ϕ0.335) Thru
4 (0.16)
98 (3.86) 49 (1.93)
14.5 (0.57)
60 W (1/12 HP)
124 (4.88) 70 (2.76) 45.5 (1.79) 37 (1.46) 24.5 (0.96)
5 max. (0.20 max.)
304 (11.97)
)
5IK100VESM-GAL□ Mass: 7.5 kg (16.5 lb.)
0.0000 0 6−0.030 0.2362−0.0012
40 W (1/19 HP)
32±0.2 (1.260±0.008)
0
18.5−0.1
0
6−0.030 0.0000 (0.2362−0.0012 )
Parallel Key (Included)
0.000 (0.728−0.004 )
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
C-50
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-51
Electromagnetic Brake Type Motors
100 W (1/8 HP) □90 mm (□3.54 in.) Parallel Shaft Combination Type/Round Shaft Type
Overview, Product Series Terminal Box Type
Cable Type Constant Speed Motors
■Specifications – Continuous Rating Product Name Upper Level: Combination Type Lower Level: Round Shaft Type Terminal Box Type
Cable Type
5IK100VESMT2-□A 5IK100VA-ESMT2
5IK100VESM-□A 5IK100VA-ESM
Three-Phase Induction Motors
Output
Voltage
Frequency
Current
Hz 50 60 50 60
A 0.55 0.48 0.57 0.48
W
HP
VAC
100
1/8
Three-Phase 220
100
1/8
Three-Phase 230
Starting Torque mN·m 850 700 850 700
oz-in 120 99 120 99
Rated Torque mN·m 690 570 690 570
Rated Speed
oz-in 97 80 97 80
r/min 1400 1680 1400 1680
●The values in the table are characteristics for the motor only. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
Product Name Cable Type
5IK100VESMT2-□A 5IK100VA-ESMT2
5IK100VESM-□A 5IK100VA-ESM
Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors
●Electromagnetic Brake (Power off activated type) Terminal Box Type
Single-Phase Induction Motors
Voltage VAC Single-Phase 220 Single-Phase 230
Frequency Hz 50 60 50 60
Current A
Input W
Static Friction Torque mN·m oz-in
0.04
6
500
71
0.04
6
500
71
Low-Speed Synchronous Motors
Torque Motors
●The values in the table are characteristics for the motor only. Watertight, Dust-Resistant Motors
■Product Line Combination Type
Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed and they are also available separately. In addition, the gearhead can be removed and the assembly position can be changed in 90˚ increments.
●Combination Type with Parallel Shaft Type
Product Name
Terminal Box Type
5IK100VESMT2-□A
Cable Type 5IK100VESM-□A
=
List Price $404.00 $424.00 $434.00 $382.00 $402.00 $412.00
Type Terminal Box Type Cable Type
Product Name 5IK100VA-ESMT2 5IK100VA-ESM
+
Right-Angle Gearheads
Linear Heads
Brake Pack
●Round Shaft Type
Gear Ratio 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60 75, 90, 100, 120, 150, 180 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60 75, 90, 100, 120, 150, 180
Gearhead
Motor
Combination Type
List Price $291.00 $269.00
Accessories
The following items are included with each product. Motor, Operating Manual
Installation
The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-51
C-52 Three-Phase Induction Motors ■Permissible Torque on Combination Types ●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min
Product Name Induction Motors
Electromagnetic Brake Motors
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
250
200
166
120
100
83
60
50
41
30
25
20
16.6
5 3.1 27
6 3.7 32
7.5 4.7 41
9 5.6 49
12.5 7.8 69
15 9.3 82
18 10.7 94
25 14.8 130
30 17.8 157
36 21.4 189
50 29.7 260
60 35.6 310
75 40 350
90 40 350
5IK100VESMT2-□A 5IK100VESM-□A
●60 Hz 360
300
240
200
144
120
100
72
60
50
36
30
24
20
5 2.6 23
6 3.1 27
7.5 3.8 33
9 4.6 40
12.5 6.4 56
15 7.7 68
18 8.8 77
25 12.3 108
30 14.7 130
36 17.6 155
50 24.5 210
60 29.4 260
75 34.6 300
90 40 350
Gear Ratio 5IK100VESMT2-□A 5IK100VESM-□A
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
12
Page C-19
■Starting and Braking Characteristics (Reference values - motor only)
Three-Phase 50 Hz Three-Phase 60 Hz
Braking Time
5
3
Time [ms]
Overrun [Rotations]
150
4
100 Starting Time
50
Overrun
1 0
8.3
0
0.25
0
1
0.5
2
3
0.75
4
1
5
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
1.25 [×10-4 kg·m2] 6
7
8
[oz-in2]
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
10
100 120 150 180 40 40 40 40 350 350 350 350
➜
Page C-17
Inertia J
C-52
15
➜
2 BH Series 200 W (1/4 HP)
18
■Permissible Inertia J of Combination Types
200
90 W (1/8 HP)
10
■Permissible Radial Load and Permissible Axial Load
25 W (1/30 HP)
60 W (1/12 HP)
12.5
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load. ●A number indicating the gear ratio is entered where the box □ is located within the product name.
15 W (1/150 HP)
40 W (1/19 HP)
15
100 120 150 180 40 40 40 40 350 350 350 350
Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min
Product Name
High-Efficiency K S Series 60 W (1/12 HP)
300
Gear Ratio
Standard AC Motors ■Dimensions
C-53
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name. Overview, Product Series
●Combination Type ◇Terminal Box Type Gear Ratio
5IK100VESMT2-□A
5IK100VGVR-ESMT2
5GVR□A
5∼15 18∼36 50∼180
5.4 11.9
A1400A A1400B A1400C
Constant Speed Motors Three-Phase Induction Motors
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
76.5 (3.01) (3/4”)]
No. 12-24 UNC 12 (0.47) Deep
Single-Phase Induction Motors
7.5 (0.30)
(
±0.5
25±0.2 (0.984±0.008)
4×ϕ8.5 (ϕ0.335) Thru 90 (3.54)
42±1 (1.65±0.04)
L
164 (6.46)
)
Reversible Motors
A-A
ϕ104 ±0.02) 9 (ϕ4.0
5 (0.20)
+0.381 0 +0.015 0.106 0.000
2.692
0
A
2D CAD
40 (1.57)
[
Mass kg lb.
4.763−0.025
ϕ88 (ϕ3.46)
A
0.0000 ϕ0.7500−0.0005
in. 1.77 2.28 2.76
90 (3.54)
25 (0.98)
0
ϕ19.050−0.013
0.0000 (ϕ1.5354−0.0010 )
34 (1.34)
18±0.5 0 ϕ39−0.025 (0.71±0.02)
87.5 (3.44)
23 (0.91)
76.5 (3.01) 30 max. (1.18 max.)
L mm 45 58 70
0.0000 (0.1875−0.0010 )
Gearhead Product Name
+0.040
Motor Product Name
4.763 0 (0.1875+0.0016 0.0000)
Product Name
Electromagnetic Brake Motors
Clutch & Brake Motors
0
4.763−0.025 0.0000 (0.1875−0.0010 )
Low-Speed Synchronous Motors
Parallel Key (Included)
◇Cable Type
34 (1.34) 25 (0.98) A
0
ϕ19.050−0.013 0.0000 [ϕ0.7500−0.0005 (3/4”)]
A
25±0.2 (0.984±0.008) 90 (3.54)
Watertight, Dust-Resistant Motors
(
0.0000 0.1875−0.0010
)
Parallel Key (Included)
No.12-24 UNC 12 (0.47) Deep
Right-Angle Gearheads
)
0
4.763−0.025
(
5 (0.20)
ϕ88 (ϕ3.46)
7.5 (0.30)
42±1 (1.65±0.04)
5.1 11.2
+0.040 4.763 0 +0.0016 0.1875 0.0000
L
2D CAD A1398A A1398B A1398C
+0.381 0 +0.015 0.106 0.000
2.692
(
A-A
)
Linear Heads
Brake Pack
±0.5
ϕ104 .02) 9±0 (ϕ4.0
Accessories
7.5 (0.30)
164 (6.46)
in. 1.77 2.28 2.76
0
5IK100VGVR-ESM
mm 45 58 70
0.0000 (0.1875−0.0010 )
5GVR□A
5∼15 18∼36 50∼180
4.763−0.025
Gear Ratio
Torque Motors
Mass kg lb.
90 (3.54)
5IK100VESM-□A
Gearhead Product Name
0.0000 (ϕ1.5354−0.0010 )
Motor Product Name
18±0.5 0 ϕ39−0.025 (0.71±0.02)
Product Name
L
20 (0.79)
80 (3) 32.5 (1.28)
4×ϕ8.5 (ϕ0.335) Thru
1000 (3.3 ft.) ✽Motor Cable ϕ8 (ϕ0.31)
27 (1.06)
14.5 (0.57)
5 max. (0.20 max.)
Installation
Protective Earth Terminal M4
Detail Drawing of Protective Earth Terminal
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-53
C-54 Three-Phase Induction Motors ●Round Shaft Type ◇Terminal Box Type
87.5 (3.44) 30 max. (1.18 max.) 0
Electromagnetic Brake Motors
Applicable Cable Size Outer Diameter ϕ8∼ϕ13 mm (ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
ϕ12−0.018
23 (0.91)
Induction Motors
A1324
40 (1.57)
76.5 (3.01)
Mass: 3.9 kg (8.6 lb.)
0.0000 (ϕ0.4724−0.0007 )
5IK100VA-ESMT2
.5
90 (3.54)
(
60 W (1/12 HP)
ϕ88 (ϕ3.46)
High-Efficiency K S Series
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
)
4±0 ϕ10 ±0.02) 09 (ϕ4.
7.5 (0.30) 164 (6.46)
100 W (1/8 HP)
4×ϕ6.5 (ϕ0.256) Thru 90 (3.54)
2 (0.08) 37±1 (1.46±0.04)
◇Cable Type 5IK100VA-ESM
Mass: 3.6 kg (7.9 lb.)
A1287
)
7.5 (0.30)
ϕ104±0 .02) 9±0 (ϕ4.0
20 (0.79)
.5
Protective Earth Terminal M4
60 W (1/12 HP)
90 W (1/8 HP)
32.5 (1.28)
4×ϕ6.5 (ϕ0.256) Thru
80 (3) 1000 (3.3 ft.)
27 (1.06)
14.5 (0.57)
40 W (1/19 HP)
5 max. (0.20 max.)
(
90 (3.54)
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
ϕ88 (ϕ3.46)
25 W (1/30 HP)
90 (3.54)
(
15 W (1/150 HP)
0
7.5 (0.30)
37±1 (1.46±0.04) 2 (0.08)
ϕ12−0.018
164 (6.46)
6W (1/125 HP)
0.0000 ϕ0.4724−0.0007
)
Induction Motors
Detail Drawing of Protective Earth Terminal
✽Motor Cable ϕ8 (ϕ0.31)
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
C-54
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-55
■Connection Diagrams ●Induction Motor - Right-Angle Geared Type Terminal Box Type
Type
Lead Wire Type Overview, Product Series
R0 C0 R0 C0
L1(R)
Connection Diagram
R0 C0
L2(S)
U V W
R0 C0
L1(R) Motor
L2(S)
Red R0 C0
White R0 C0
L3(T)
PE
Black
L3(T)
PE
Motor
Constant Speed Motors Three-Phase Induction Motors
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T. Single-Phase Induction Motors
Note When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. Recommended electromagnetic switch ➜ Page C-57
Reversible Motors
◇Rotation direction (as in the connection diagram above) The rotation direction of the output shaft is as follows, depending on the type and gear ratio. Gear Ratio: 7.5∼120
Type
Gear Ratio: 150∼240
[Electromagnetic Switch] Electromagnetic Thermal Contact Device Relay
Hollow Shaft Type
CCW
CW
L shaft
R shaft
R shaft
[Surge Protection] Connect the CR circuit for surge suppression ( ). R0=5∼200 Ω C0=0.1∼0.2 μF 200 WV ●We also offer the EPCR1201-2 (sold separately) as an accessory. ➜ Page C-208
L shaft
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors
Solid Shaft Type CCW
CW
Watertight, Dust-Resistant Motors
CCW
CW
●As viewed from the installation surface, the terminal box type is equipped with a terminal box on the top surface.
Right-Angle Gearheads
●Induction Motor - Parallel Shaft Combination Type/Round Shaft Type Type
Terminal Box Type
Lead Wire Type
R0 C0
L1(R)
Connection Diagram
R0 C0
R0 C0
L2(S)
Linear Heads
U V W
R0 C0
L1(R) Motor
L2(S)
L3(T)
Red White R0 C0
Motor
PE
Black
L3(T)
PE
Brake Pack
R0 C0
Accessories
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T. Note When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
Installation
Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above) The rotation direction of the output shaft is as follows, depending on the gear ratio. 60 W (1/12 HP)
Gear Ratio: 5∼18 120∼300 Round Shaft Type
60 W Gear Ratio: 25∼100 (1/12 HP)
100 W (1/8 HP)
Gear Ratio: 5∼15 75∼180 Round Shaft Type
100 W (1/8 HP)
Type
[Clockwise]
Gear Ratio: 18∼60
[Electromagnetic Switch] Electromagnetic Thermal Contact Device Relay
[Surge Protection] Connect the CR circuit for surge suppression ( ). R0=5∼200 Ω C0=0.1∼0.2 μF 200 WV ●We also offer the EPCR1201-2 (sold separately) as an accessory. ➜ Page C-208
[Counterclockwise]
Rotation Direction CW CCW
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-55
C-56 Three-Phase Induction Motors ●Electromagnetic Brake Type Motor - Right-Angle Geared Type Terminal Box Type
Type
Cable Type R0 C0
R0 C0
L1(R)
Induction Motors
Electromagnetic Brake Motors
R0 C0
R0 C0
White
L2(S)
L2(S)
Connection Diagram
Red
L1(R) U V W MB MB
R0 C0
L3(T) R0
C0
SW1
High-Efficiency K S Series
Motor
R0 C0
Black
L3(T)
Motor
PE
Orange R0
Electromagnetic Brake
C0
Orange
PE
Electromagnetic Brake
SW1
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T. 60 W (1/12 HP)
100 W (1/8 HP)
Note When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above) The rotation direction of the output shaft is as follows, depending on the gear ratio of the types.
Induction Motors
6W (1/125 HP)
Gear Ratio: 7.5∼120
Type
Gear Ratio: 150∼240
Hollow Shaft Type
25 W (1/30 HP)
L shaft
R shaft
60 W (1/12 HP)
R shaft
L shaft
[Contact Capacity of Switch SW1] 250 VAC 5 A min. (Inductive load) (Interlocking) CCW
CCW
CW
●As viewed from the installation surface, the terminal box type is equipped with a terminal box on the top surface.
●Electromagnetic Brake Type Motor - Parallel Shaft Combination Type/Round Shaft Type Type
Terminal Box Type
Cable Type R0 C0
R0 C0
90 W (1/8 HP) BH Series 200 W (1/4 HP)
●We also offer the EPCR1201-2 (sold separately) as an accessory. ➜ Page C-208
Solid Shaft Type CW
40 W (1/19 HP)
[Surge Protection] Connect the CR circuit for surge suppression ( ). R0=5∼200 Ω C0=0.1∼0.2 μF 200 WV
Electromagnetic Thermal Contact Device Relay
CCW
CW 15 W (1/150 HP)
[Electromagnetic Switch]
L1(R)
R0 C0
L2(S)
Connection Diagram
U V W MB MB
R0 C0
L3(T) R0
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Red
L1(R)
C0
SW1
R0 C0
White
L2(S)
R0 C0
Motor
Black
L3(T)
Motor
PE
Orange
Electromagnetic Brake
R0
C0
Orange
PE
Electromagnetic Brake
SW1
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T. Note When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above) The rotation direction of the output shaft is as follows, depending on the gear ratio. 60 W (1/12 HP)
Gear Ratio: 5∼18 120∼300 Round Shaft Type
60 W Gear Ratio: 25∼100 (1/12 HP)
100 W (1/8 HP)
Gear Ratio: 5∼15 75∼180 Round Shaft Type
100 W (1/8 HP)
Type
[Clockwise]
Gear Ratio: 18∼60
[Electromagnetic Switch] Electromagnetic Thermal Contact Device Relay
[Surge Protection] Connect the CR circuit for surge suppression ( ). R0=5∼200 Ω C0=0.1∼0.2 μF 200 WV ●We also offer the EPCR1201-2 (sold separately) as an accessory. ➜ Page C-208
[Counterclockwise]
[Contact Capacity of Switch SW1] 250 VAC 5 A min. (Inductive load) (Interlocking)
Rotation Direction CW CCW
C-56
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-57
■Recommended Electromagnetic Switch Always connect an electromagnetic switch when connecting the motor power supply. Set the rated current of the motor for the stabilized current of the thermal relay. ●Mitsubishi Electric Corporation Overview, For 60 W (1/12 HP) motor Part number: MSO-N10 0.35 A 200 V □ Product Series For 100 W (1/8 HP) motor Part number: MSO-N10 0.5 A 200 V □
●Fuji Electric FA Components & Systems Co., Ltd. For 60 W (1/12 HP) motor Part number: SC11AAN-□ 10TF For 100 W (1/8 HP) motor Part number: SC11AAN-□ 10TH ●The winding code is specified in the box □ in the part number.
Motor Output Power 60 W (1/12 HP)
100 W (1/8 HP)
Motor Rating Specifications Voltage Frequency Rated Current VAC Hz A 50 0.37 220 60 0.33 50 0.38 230 60 0.33 50 0.55 220 60 0.48 (0.52)✽ 50 0.57 230 60 0.48 (0.52)✽
●The winding name is specified in the box □ in the part number.
Winding Code
Motor Output Power
M
60 W (1/12 HP)
P M
100 W (1/8 HP)
P
✽( ) contains the value of the right-angle geared type.
Motor Rating Specifications Voltage Frequency Rated Current VAC Hz A 50 0.37 220 60 0.33 50 0.38 230 60 0.33 50 0.55 220 60 0.48 (0.52)✽ 50 0.57 230 60 0.48 (0.52)✽
Constant Speed Motors
Winding Name
Three-Phase Induction Motors
220 VAC 230 VAC 220 VAC
Single-Phase Induction Motors Reversible Motors
230 VAC
✽( ) contains the value of the right-angle geared type.
Electromagnetic Brake Motors
■Usage with Inverter
Clutch & Brake Motors
When using in combination with an inverter, the setting frequency conditions of the inverter are as follows. · Right-Angle Geared Type: 80 Hz max. · Parallel Shaft Combination Type/Round Shaft Type: 120 Hz max. Refer to the operating manual for motor settings and precautions.
Low-Speed Synchronous Motors
■Combination Type – List of Combinations
Torque Motors
The combination type comes with the motor and parallel shaft gearhead pre-assembled.
●Induction Motors Product Name 5IK60VEST2-□A 5IK100VEST2-□A 5IK60VES-□A 5IK100VES-□A
●Electromagnetic Brake Type Motors Motor Product Name 5IK60VGVH-EST2 5IK100VGVR-EST2 5IK60VGVH-ES 5IK100VGVR-ES
Gearhead Product Name 5GVH□A 5GVR□A 5GVH□A 5GVR□A
Product Name 5IK60VESMT2-□A 5IK100VESMT2-□A 5IK60VESM-□A 5IK100VESM-□A
Motor Product Name 5IK60VGVH-ESMT2 5IK100VGVR-ESMT2 5IK60VGVH-ESM 5IK100VGVR-ESM
Gearhead Product Name 5GVH□A 5GVR□A 5GVH□A 5GVR□A
Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-57
C-21
Overview, Product Series Constant Speed Motors
Standard AC Motors Three-Phase Induction Motors
Constant Speed Motors
Three-Phase Induction Motors Single-Phase Induction Motors
Three-Phase Induction Motors
Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
Page
C-22 C-30 K S Series [60 W (1/12 HP, 100 W (1/8 HP)] ·········· C-32 World K Series [6 W∼90 W (1/125 HP∼1/8 HP)] ···· C-58 BH Series [200 W (1/4 HP)] ····································· C-96 2-Pole, High-Speed Type [60 W∼150 W (1/12 HP∼1/5 HP)] ··· C-109 Features and Types of Three-Phase Induction Motors ····
General Specifications ············································
C-21
C-22 Three-Phase Induction Motors
Features and Types of Three-Phase Induction Motors Induction Motors
Electromagnetic Brake Motors
High-Efficiency K S Series 60 W (1/12 HP)
100 W (1/8 HP)
■Features of Three-Phase Induction Motors ●Optimal for Uni-Directional and Continuous Operation Induction motors are optimal for uni-directional and continuous operation such as a conveyor system.
●Speed Control Operation Combined use of an inverter with a three-phase motor enables speed control operation.
●Extensive Product Line The K S Series, World K Series and BH Series are available. We have motors with an output power range of 6 W (1/125 HP) to 200 W (1/4 HP) to meet your specific application.
●Compatible with Various Gearheads Combination with a gearhead allows the motor speed to be reduced to the required speed or generate higher torque.
■Types of Three-Phase Induction Motors Series
Induction Motors
Features, Lineup
●High Efficiency Three-Phase Motors through Optimal Design
K S Series
6W (1/125 HP)
A review of the basic motor design has yielded unprecedented high efficiency and energy savings.
15 W (1/150 HP)
●Best Characteristics with Inverter Combination
World K Series
60 W (1/12 HP)
●Conforms to Safety Standards
Output Power Voltage
Frame Size
● Applicable Standards
Output Power
UL/CSA Standards Certified under the China Compulsory Certification System✽ (CCC System) CE Marking (Low Voltage Directive)
BH Series 200 W (1/4 HP)
Voltage
□60 mm (□2.36 in.)∼□90 mm (□3.54 in.) Lead Wire Type: 6 W∼40 W (1/125 HP∼1/19 HP) Terminal Box Type: 25 W∼40 W (1/30 HP∼1/19 HP) Conduit Box Type: 25 W∼90 W (1/30 HP∼1/8 HP) 2-Pole, High-Speed Type: 60 W∼150 W (1/12 HP∼1/5 HP) Three-Phase 220/230 VAC
✽ Except Conduit Box Type ✽
● Motor Overheat Protection Device Thermal protector, Impedance protected
✽ Except Conduit Box Type
BH Series
●Smallest Frame Size among 200 W (1/4 HP) Motors These motors achieve a high output of 200 W (1/4 HP) with a frame size of 104 mm (4.09 in.).
●Hypoid Gear Right Angle Type is Available ●"Combination Type" for Easy Installation
●Tapped Hole at the Shaft End The gearhead shaft features a tapped hole for convenient connection with loads.
●Product Line Frame Size Output Power
With each combination type, the motor and gearhead come pre-assembled for easy installation.
●Conforms to Safety Standards and Global Voltage Specifications
Type
Voltage
C-22
□90 mm (□3.54 in.) Right-Angle Geared: 100 W (1/8 HP) Parallel Shaft Combination: 60 W (1/12 HP), 100 W (1/8 HP) Round Shaft: 60 W (1/12 HP), 100 W (1/8 HP) Three-Phase 220/230 VAC
●Product Line
All World K Series motors have an overheat protection device built-in and conform to major safety standards.
90 W (1/8 HP)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Frame Size
Speed can be controlled over a wide range, and high torque is exerted even at low speeds. Because it is a highperformance motor with little speed reduction even with a large load, stabilized speed control is possible.
25 W (1/30 HP)
40 W (1/19 HP)
●Product Line
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
□104 mm (□4.09 in.) 200 W (1/4 HP) Terminal Box Type: Right-Angle, Hollow Shaft Type, Right-Angle, Solid Shaft Type, Parallel Shaft Type, Round Shaft Type Cable Type: Right-Angle, Hollow Shaft Type, Right-Angle, Solid Shaft Type, Parallel Shaft Type, Round Shaft Type Three-Phase 220/230 VAC
Standard AC Motors
C-23
■Features of the K S Series High Efficiency Three-Phase Motors through Optimal Design ●High Efficiency at a Maximum of 73%
●High Performance
Specialized components and an optimal magnetic design are used to make high efficiency three-phase motors with a maximum efficiency of 73%. Motors are fanless with increased motor torque.
Characteristics have been improved through pursuit of the specifications required for the three-phase motor and a review of the design to create a high-performance motor with little speed reduction even with a large load. ● Changes in Speed according to Load
Optimized Configuration of Steel Plate
Specialized Three-Phase Motor Design
Low Loss Magnetic Steel Sheet
Constant Speed Motors Three-Phase Induction Motors
K S Series Conventional Product Load Torque[N·m]
Overview, Product Series
Single-Phase Induction Motors
Rated Torque
Reversible Motors Speed
Increased Winding Space Factor
100 W (1/8 HP)✽ (60 Hz)
K S Series
70%
73.9%
Conventional Product
65.7%
66.7%
1500
1800
Electromagnetic Brake Motors
●Increased Motor Output Power Output power of 100 W (1/8 HP) in a 90 mm (3.54 in.) frame size is achieved through increased efficiency. An overall length 15 mm (0.59 in.) shorter than the conventional motor contributes to equipment downsizing.
● Comparison of Maximum Efficiency (Reference values) 60 W (1/12 HP) (60 Hz)
[r/min]
15 mm (0.59 in.) K S Series
Output Power 100 W (1/8 HP)
✽Conventional product values are for 90 W (1/8 HP)
Mass −0.3 kg (−0.66 lb.)
●Power Consumption Reduced by up to 10% Compared to a conventional 90 W (1/8 HP) motor under the same conditions, power consumption is reduced by a maximum of about 10%, contributing to the equipment's energy savings.
Loss Reduced Power Consumption Reduced by about 31% by about 10%
150
Input [W]
100
45
31
Loss
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors
Conventional Product
Output Power 90 W (1/8 HP)
Right-Angle Gearheads
●Fanless With reduced loss, there is less heat generation in the motor, so the cooling fan that was incorporated into the conventional 60 W (1/12 HP) min. products is no longer included. K S Series
Linear Heads
Conventional Product Brake Pack
50
90
90
Output Power Accessories
0
Conventional Product K S Series 100 W (1/8 HP) 90 W (1/8 HP) when outputting 90 W (1/8 HP)
Cooling Fan
●No Dust, etc.
Installation
With no cooling fan, dust is not blown around.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-23
C-24 Three-Phase Induction Motors Best Characteristics Achieved when Combined with an Inverter ●Wide Range of Speeds Speed can be controlled over a wide range using an inverter, from 3∼120 Hz✽. Also, with improved characteristics, high torque can be exerted even at low speeds. Induction Motors
✽80 Hz with a right-angle shaft Conventional Product
Permissible Torque
High-Efficiency K S Series
100
50
0
60 W (1/12 HP)
0
500
1000
1500
2000
2500
3000 3500 4000 Speed [r/min]
Speed Ratio 12:1 200
2400
Even with a Load There is Little Speed Reduction 100 W (1/8 HP) Round Shaft Type
100
50
0 0
500
1000
1500 2000 2500 Speed [r/min] Speed Ratio 40:1
3000
3500
4000
3600 (120 Hz)✽
●Handles High-Speed Rotation (Round shaft type)
Because it is a high-performance motor with little speed reduction Induction even with a large load, stabilized speed control is possible.
6W (1/125 HP)
Continuous Operation Range
90 (3 Hz)
●Improved Speed Stability
Motors
100 W (1/8 HP) Round Shaft Type
Permissible Torque Rated Torque [%]
Rated Torque [%]
Electromagnetic Brake Motors
100 W (1/8 HP)
K S Series
Continuous Operation Range
Creep-free bearings, etc. are used in the round shaft type, and components capable of handling high-speed rotation have been selected and designed for inverter control.
Continuous Operation Range Speed at max. Permissible Torque
25 W (1/30 HP)
Speed with No Load Rated Torque [%]
15 W (1/150 HP)
100 Permissible Torque 50
0 0
500
1000
1500
40 W (1/19 HP)
2000 2500 Speed [r/min]
3000
3500
4000
Uses Creep-Free Bearings (Round shaft type only)
Slim Body Terminal Box (Terminal box type) 60 W (1/12 HP)
90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
●Equipped with an Easy-to-Wire Slim Body Terminal Box
●IP66-Compliant Drip-Proof Specification
This new shape of terminal box is designed to make wiring the terminal block easier. It has a slim body, with a cable outlet that can be rotated in 90˚ increments for 4 possible directions.
The seal structure for the motor, gearhead and terminal box components has been strengthened. The terminal box type✽ is compliant with the IP66 degree of protection.
40 mm✽ (1.57 in.)
✽ The round shaft type is 46 mm (1.81 in.).
C-24
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
✽Excluding installation surface of round shaft type IP66: The IP indication that shows the watertight and dust-resistant performance are specified under IEC 60529 and IEC 60034-5.
Main Specifications ● Material Case and terminal box: Aluminum Output shaft: S45C Screws: Stainless steel (externally facing screws only) ● Surface Treatment Case and terminal box: Painted (excluding installation surface)
Standard AC Motors
C-25
High-Strength Gearhead Uses a gearhead that excels in both torque and strength.
Right-Angle Geared Type ●Internal Gearhead Structure
80
Rated Torque [N·m (lb-in)]
Permissible Radial Load Uses Hypoid Gears
Permissible Axial Load
50
Permissible Radial Load 1700 N (380 lb.)
The seal structure is strengthened. This contributes to increased equipment reliability.
(10 mm (0.39 in.) from the end of the output shaft)
Constant Speed Motors
Rated Torque 3.5 Times Higher
40 30 20 (177) 10 0
Oil Seal
Overview, Product Series
K S Series
70 (610) 60
Oriental Motor Conventional Product 0
50
100
Expanded High Gear Ratio Lineup
150
200
250
Gear Ratio K S Series Rated Torque 70 N∙m (610 lb-in) Conventional Product 5GE-RA Rated Torque 20 N∙m (177 lb-in)
Permissible Axial Load 350 N (78 lb.)
●Internal Gearhead Structure Oil Seal
Permissible Torque [N·m (lb-in)]
Parallel Shaft Combination Type Permissible Radial Load
Carburized Shaft and Gears
Permissible Axial Load
Permissible Radial Load 500 N (112 lb.) Large-diameter Bearing
Side Panel
(10 mm (0.39 in.) from the end of the output shaft)
Permissible Axial Load 150 N (33 lb.)
Rated Torque Doubled
30 20 (177)
Electromagnetic Brake Motors
Oriental Motor Conventional Product
Clutch & Brake Motors
10 0
Single-Phase Induction Motors Reversible Motors
K S Series
40 (350)
Three-Phase Induction Motors
0
50
100
150
200
Gear Ratio K S Series Permissible Torque 40 N∙m (350 lb-in) Conventional Product 5GE-S Permissible Torque 20 N∙m (177 lb-in)
Low-Speed Synchronous Motors
Torque Motors
Benefits of Using the Right-Angle Geared Type ●Connect the Drive Shaft Directly to a Hollow Shaft Geared Type to Reduce Costs
Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Conveyor drive rollers can be installed on both ends of ●Component cost reduction through reduction of fastening parts ●Assembly steps reduced through mechanism simplification ●Reduced maintenance, such as belt tension adjustment ●Space saving
Brake Pack
the load shaft of a hollow shaft type. The equipment can be made even smaller compared to when the motor is installed on the
Accessories
side of the conveyor.
●Motor Mounted Perpendicularly to Load to Save Space
Installation
Reduced by 81 mm (3.19 in.)
200 mm (7.87 in.)
World K Series 90 W (1/8 HP) with Parallel Shaft Gearhead
119 mm (4.69 in.)
K S Series 100 W (1/8 HP) Right-Angle, Hollow Shaft Type
Because the output shaft of the gear is vertically in the middle of the installation surface, it is possible to change the installation direction horizontally. Installation to suit the application can be selected.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-25
C-26 Three-Phase Induction Motors ■System Configuration ●Right-Angle Geared Type
K S Series Induction Motors
Electromagnetic Brake Motors
AC Power Supply (Main power supply)
High-Efficiency K S Series 60 W (1/12 HP)
100 W (1/8 HP)
Accessories (Sold separately)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
25 W (1/30 HP)
40 W (1/19 HP)
60 W (1/12 HP)
90 W (1/8 HP)
Flexible Couplings ➜ Page C-201
Torque Arms ➜ Page C-200
Solid shaft type only
Hollow shaft type only
CR Circuit for Surge Suppression ➜ Page C-208
●Example of System Configuration Sold Separately CR Circuit for Surge Torque Arm Suppression SOT5A EPCR1201-2 $23.00 $5.00
Induction Motor
5IK100VES-GHR25 $317.00
● The system configuration shown above is an example. Other combinations are also available.
●Parallel Shaft Combination Type
K S Series
BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
AC Power Supply (Main power supply)
Accessories (Sold separately)
Flexible Couplings ➜ Page C-201
Mounting Brackets ➜ Page C-196
●Example of System Configuration Sold Separately Induction Motor
Mounting Bracket
Flexible Coupling
SOL5UBF $29.00
MCL5518F12 $97.00
5IK60VEST2-25A $261.00
CR Circuit for Surge Suppression EPCR1201-2 $5.00
● The system configuration shown above is an example. Other combinations are also available.
C-26
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
CR Circuit for Surge Suppression ➜ Page C-208
Standard AC Motors
C-27
■Product Line of Three-Phase Induction Motors ●Induction Motors Motor Frame Size, Output Power Series
Voltage (VAC)
Type
□60 mm □70 mm □80 mm (□2.36 in.) (□2.76 in.) (□3.15 in.) 6W (1/125 HP)
15 W (1/50 HP)
25 W (1/30 HP)
□90 mm (□3.54 in.) 40 W (1/19 HP)
60 W (1/12 HP)
90 W (1/8 HP)
□104 mm (□4.09 in.) 100 W (1/8 HP)
Three-Phase 220/230
Terminal Box Type Lead Wire
K S Series Parallel Shaft Combination Type Round Shaft Type
Three-Phase 220/230
Terminal Box Type
●
●
Lead Wire
●
●
World K Series
Three-Phase 220/230
2-Pole, High-Speed Type
Three-Phase 220/230 Three-Phase 220/230
BH Series
200 W (1/4 HP)
● ●
K S Series Right-Angle Geared Type
Terminal Box Conduit Box Lead Wire Terminal Box Lead Wire Terminal Box Cable
150 W (1/5 HP)
●
●
● ● ●
● ● ●
●
●
●
●
Overview, Product Series Constant Speed Motors Three-Phase Induction Motors Single-Phase Induction Motors
● ● ● ●
●Electromagnetic Brake Type Motor
Reversible Motors
Electromagnetic Brake Motors
Motor Frame Size, Output Power Series
Voltage (VAC)
Type
□60 mm □70 mm □80 mm (□2.36 in.) (□2.76 in.) (□3.15 in.) 6W (1/125 HP)
15 W (1/50 HP)
25 W (1/30 HP)
□90 mm (□3.54 in.) 40 W (1/19 HP)
60 W (1/12 HP)
90 W (1/8 HP)
□104 mm (□4.09 in.) 100 W (1/8 HP)
200 W (1/4 HP)
● ●
K S Series Right-Angle Geared Type
Three-Phase 220/230
Terminal Box Type Cables
K S Series Parallel Shaft Combination Type Round Shaft Type
Three-Phase 220/230
Terminal Box Type
●
●
Cables
●
●
World K Series
Three-Phase 220/230
Lead Wire
BH Series
Three-Phase 220/230
Terminal Box Type
●
●
●
●
●
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors
● ●
Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-27
C-28 Three-Phase Induction Motors ■Shaft Placement of Solid Shaft Type
■Product Number ●K S Series ◇Right-Angle Geared Type Induction Motors
Electromagnetic Brake Motors
High-Efficiency K S Series 60 W (1/12 HP)
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
25 W (1/30 HP)
5 I K 100 V ES M T2 - GHR 15 ①② ③
④
⑤
⑥
⑦
⑧
⑨
⑩
◇Parallel Shaft Combination Type
5 I K 100 V ES M T2 - 15A ①② ③
④
⑤
⑥
⑦
⑧
⑩
Protective Earth Terminal
5 I K 100 V A - ES T2 ①② ③
④
⑤ ⑩
⑥
60 W (1/12 HP)
⑧
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
Motor Frame Size 5: 90 mm (3.54 in.) Product Name I: Induction Motor Series K: K Series Output Power (W) (Example) 100: 100 W (1/8 HP) V: Three-Phase High Efficiency Motor Power Supply Voltage/Number of Poles ES: Three-Phase 220/230 VAC 4-Pole M: Power Off Activated Electromagnetic Brake Type T2: Terminal Box Type Blank: Lead Wire Type or Cable Type
⑨
Output Shaft Type and Direction
GHR: Hollow Shaft Type GAR: Solid Shaft Type (R shaft)
⑩
Gear Ratio and Shaft Configuration
Number: Gear Ratio for Gearhead A: Round Shaft Type
GAL: Solid Shaft Type (L shaft)
90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
5 I K 40 GN - SW 2 T ① ② ③
④
⑤
⑥
⑦ ⑧
① ② ③ ④
Motor Frame Size Motor Type Series Output Power (W)
2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.) I: Induction Motor K: K Series (Example) 40: 40 W (1/19 HP)
⑤
Motor Shaft Type, Type of Pinion
A: Round Shaft GN: GN Type Pinion Shaft GE: GE Type Pinion Shaft
⑥
Power Supply Voltage/ Number of Poles 2: RoHS-Compliant T: Terminal Box Type
SW: Three-Phase 220/230 VAC 4-Pole TW: Three-Phase 220/230 VAC 2-Pole
⑦ ⑧
M: Power Off Activated Type Electromagnetic Brake
◇Conduit Box Type
5 I K 40 GN - S H ① ② ③
C-28
④
⑤
⑥ ⑦
① ② ③ ④
Motor Frame Size Motor Type Series Output Power (W)
4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.) I: Induction Motor K: K Series (Example) 40: 40 W (1/19 HP)
⑤
Motor Shaft Type, Type of Pinion
A, AA: Round Shaft GN: GN Type Pinion Shaft GE: GE Type Pinion Shaft
⑥ ⑦
Power Supply Voltage H: Conduit Box Type
S: Three-Phase 220/230 VAC
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Protective Earth Terminal
Output Shaft Direction Output Shaft Direction L Shaft (Left) R Shaft (Right) ●Output gear shaft direction when seen from the protective earth terminal side. ●For motors equipped with a terminal box, the terminal box is on the opposite side.
◇Round Shaft Type
●World K Series 40 W (1/19 HP)
For the solid shaft type, either a right or left facing output shaft can be selected. Select the type that best suits the application.
Standard AC Motors
C-29
●Gearhead
5 GN 50 SA ① ① ② ③ ④
②
③
④
Gearhead Frame Size Type of Pinion Gear Ratio
2: 60 mm (2.36 in.) 3: 70 mm (2.76 in.) 4: 80 mm (3.15 in.) 5: 90 mm (3.54 in.) GN: GN Type Pinion GE: GE Type Pinion (Example) 50: Gear Ratio of 50:1 10X denotes the decimal gearhead of gear ratio 10:1
Overview, Product Series
GN Type Pinion
SA: Long Life, Low Noise GN-S Gearhead RH: Right-Angle, Hollow Shaft Gearhead RAA: Right-Angle, Solid Shaft Gearhead
GE Type Pinion
SA: Long Life GE-S Gearhead RH: Right-Angle, Hollow Shaft Gearhead RAA: Right-Angle, Solid Shaft Gearhead
Constant Speed Motors
●BH Series
BH I 6 2 S M T - 100 RH ①
②③ ④ ⑤ ⑥ ⑦
⑧
Three-Phase Induction Motors Single-Phase Induction Motors
⑨
① ② ③ ④ ⑤ ⑥ ⑦ ⑧
Series BH: BH Series Motor Type I: Induction Motor Motor Frame Size 6: 104 mm (4.09 in.) Output Power (W) (Example) 2: 200 W (1/4 HP) Power Supply Voltage S: Three-Phase 220/230 VAC M: Power Off Activated Type Electromagnetic Brake T: Terminal Box Type Blank: Cable Type Gear Ratio, Motor Shaft Type A: Round Shaft Type Number: Gear Ratio of Combination Type
⑨
Type of Gearhead (Combination type only)
RH: Right-Angle, Hollow Shaft Type RA: Right-Angle, Solid Shaft Type Blank: Parallel Shaft Type
Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-29
C-30 Three-Phase Induction Motors ■General Specifications ●K S Series ◇Right-Angle Geared Type Induction Motors
Electromagnetic Brake Motors
High-Efficiency K S Series
Item Insulation Resistance
Specifications 100 MΩ or more when a 500 VDC megger is applied between the motor windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Voltage
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the motor windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise
Temperature rise of windings is 80˚C (144˚F) or less measured by the resistance change method after rated load continuous operation under normal ambient temperature and humidity.
Thermal Class
130 (B)
Operating Ambient Temperature
0∼+40˚C (+32∼+104˚F) (non-freezing)
Operating Ambient Humidity 85% or less (non-condensing) 60 W (1/12 HP)
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
25 W (1/30 HP)
Degree of Protection
Note ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
◇Parallel Shaft Combination Type/Round Shaft Type Item Insulation Resistance
Specifications 100 MΩ or more when a 500 VDC megger is applied between the motor windings and the case after continuous operation under normal ambient temperature and humidity.
Dielectric Voltage
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the motor windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise
A gearhead or equivalent heat sink (200 × 200 mm (7.87 × 7.87 in.), 5 mm (0.20 in.) thick, material: aluminum) is connected to the motor and the winding temperature rise is measured at 80˚C (144˚F) or less using the resistance change method after rated load continuous operation under normal ambient temperature and humidity.
Thermal Class
130 (B)
Operating Ambient Temperature
−10∼+40˚C (+14∼+104˚F) (non-freezing)
Operating Ambient Humidity 85% or less (non-condensing) Degree of Protection
40 W (1/19 HP)
60 W (1/12 HP)
Terminal Box Type: IP66 Refer to page C-24 for the materials and surface treatments. Lead Wire Type: IP20 Cable Type: IP40
Terminal Box Type: IP66 (Except for installation surface of round shaft type) Refer to page C-24 for the materials and surface treatments. Lead Wire Type: IP20 Cable Type: IP40
Note ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
●World K Series 90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
◇6 W (1/125 HP)∼90 W (1/8 HP) Type, 2-Pole/High-Speed Type Item Insulation Resistance
Specifications 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.
Dielectric Strength
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity.
Temperature Rise
Temperature rise of windings are 70˚C (126˚F) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity with connecting a gearhead or equivalent heat radiation plate✽.
Thermal Class
130 (B)
Overheat Protection
6 W (1/125 HP) type has impedance protection. Other Types Built-In thermal protector (automatic return type) Open: 130±5˚C (266±9˚F), Close: 82±15˚C (179.6±27˚F) Three-Phase 15 W (1/50 HP) Type Open: 130±5˚C (266±9˚F), Close: 90±15˚C (194±27˚F)
Ambient Temperature Ambient Humidity
−10∼+40˚C (+14∼+104˚F) (non-freezing) 85% or less (non-condensing)
Degree of Protection
Lead Wire Type: IP20 Lead wire type with electromagnetic brake 60 W (1/12 HP), 90 W (1/8 HP): IP40 Terminal Box Type, Conduit Box Type: IP54 (excluding the installation surface of the round shaft type)
✽ Heat radiation plate (Material: Aluminum)
Motor Type 6 W (1/125 HP) Type 15 W (1/50 HP) Type 25 W (1/30 HP) Type 40 W (1/19 HP) Type (2-Pole, High-Speed 5IK60 Type) 60 W (1/12 HP), 90 W (1/8 HP), 150 W (1/5 HP) Type
C-30
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Size: mm (in.) Thickness: mm (in.) 115×115 (4.53×4.53) 125×125 (4.92×4.92) 135×135 (5.31×5.31) 5 (0.20) 165×165 (6.50×6.50) 200×200 (7.87×7.87)
Standard AC Motors
C-31
●BH Series Item Insulation Resistance
Specifications 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.
Dielectric Strength
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity.
Temperature Rise
Temperature rise of windings are 70˚C (126˚F) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity with connecting a gearhead or equivalent heat radiation plate✽.
Thermal Class Overheat Protection Ambient Temperature Ambient Humidity
130 (B) Built-in thermal protector (automatic return type) Open: 150±5˚C, (302±9˚F), Close: 96±15˚C (204.8±27˚F) −10∼+40˚C (+14∼+104˚F) (non-freezing) 85% or less (non-condensing)
Degree of Protection
Cable Type: IP40 Terminal Box Type: IP54 (excluding the installation surface of the round shaft type)
✽ Heat radiation plate: 230×230 mm (9.06×9.06 in.), Thickness: 5 mm (0.20 in.) (Material: Aluminum)
Overview, Product Series Constant Speed Motors Three-Phase Induction Motors Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-31
C-32 Three-Phase Induction Motors Induction Motors
60 W (1/12 HP) Induction Motors
Electromagnetic Brake Motors
□90 mm (□3.54 in.) Parallel Shaft Combination Type/Round Shaft Type
Product Name Upper Level: Combination Type Lower Level: Round Shaft Type Terminal Box Type
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
60 W (1/12 HP)
90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Output
Lead Wire Type
5IK60VEST2-□A 5IK60VA-EST2
5IK60VES-□A 5IK60VA-ES
Voltage
Frequency
Current
Hz 50 60 50 60
A 0.37 0.33 0.38 0.33
W
HP
VAC
60
1/12
Three-Phase 220
60
1/12
Three-Phase 230
Starting Torque mN•m 600 500 600 500
Rated Torque
oz-in 85 71 85 71
mN•m 410 350 410 350
oz-in 58 49 58 49
r/min 1400 1670 1400 1670
■Product Line Combination Type
Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed and they are also available separately. In addition, the gearhead can be removed and the assembly position can be changed in 90˚ increments.
●Combination Type with Parallel Shaft Type
Product Name
Terminal Box Type
5IK60VEST2-□A
Lead Wire 5IK60VES-□A Type
Gearhead
Motor
Combination Type
=
+
●Round Shaft Type
Gear Ratio 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60, 75, 90, 100 120, 150, 180 250, 300 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60, 75, 90, 100 120, 150, 180 250, 300
List Price $250.00 $261.00 $271.00 $305.00 $228.00 $239.00 $249.00 $283.00
Type Terminal Box Type Lead Wire Type
Product Name 5IK60VA-EST2 5IK60VA-ES
List Price $138.00 $116.00
The following items are included with each product. Motor, Operating Manual
The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
■Permissible Torque on Combination Types ●50 Hz Product Name
Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min Gear Ratio
5IK60VEST2-□A, 5IK60VES-□A
300
250
200
166
100
83
60
50
41
30
25
20
16.6
5 1.8 15.9
6 2.2 19.4
7.5 2.8 24
9 12.5 15 3.3 4.6 5.5 29 40 48
120
18 6.6 58
25 8.8 77
30 10.6 93
36 12.7 112
50 17.6 155
60 21.2 187
75 26.4 230
90 30 260
●60 Hz Product Name
15
12.5
10
8.3
6
5
100 120 150 180 250 300 30 30 30 30 30 30 260 260 260 260 260 260 Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min Gear Ratio
5IK60VEST2-□A, 5IK60VES-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
5 1.6 14.1
6 1.9 16.8
7.5 2.4 21
9 12.5 15 2.8 3.9 4.7 24 34 41
18 5.7 50
25 7.5 66
30 9.0 79
36 10.8 95
50 15.1 133
60 18.1 160
75 22.6 200
20
18
●A number indicating the gear ratio is entered where the box □ is located within the product name. ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
15
12
10
7.2
6
90 100 120 150 180 250 300 27.1 30 30 30 30 30 30 230 260 260 260 260 260 260
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load.
C-32
Rated Speed
●The values in the table are characteristics for the motor only. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
25 W (1/30 HP)
40 W (1/19 HP)
Lead Wire Type
■Specifications – Continuous Rating
High-Efficiency K S Series 60 W (1/12 HP)
Terminal Box Type
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors ■Permissible Radial Load and Permissible Axial Load
■Permissible Inertia J of Combination Types
➜
➜
Page C-17
■Dimensions
C-33
Page C-19 Overview, Product Series
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name.
Constant Speed Motors Three-Phase Induction Motors
●Combination Type ◇Terminal Box Type Gear Ratio
5IK60VEST2-□A
5IK60VGVH-EST2
5GVH□A
5∼18 25∼100 120∼300
A
Mass kg lb.
2D CAD
4.1 9.0
A1395A A1395B A1395C
Single-Phase Induction Motors Reversible Motors
76.5 (3.01)
]
No. 12-24 UNC 12 (0.47) Deep
Electromagnetic Brake Motors +0.381 0 +0.015 0.106 0.000
2.692
(
)
Clutch & Brake Motors
0.5
± ϕ104 ±0.02) 9 (ϕ4.0
A-A
Low-Speed Synchronous Motors
0
A
in. 1.77 2.28 2.52
4.763−0.025 0.0000 (0.1875−0.0010 )
25 (0.98)
[
mm 45 58 64
90 (3.54)
23 (0.91)
34 (1.34)
L2 in. 1.44 1.95 2.19
0.0000 (ϕ1.5354−0.0010 )
L1
ϕ89 (ϕ3.50)
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
0 ϕ19.050−0.013 0.0000 ϕ0.7500−0.0005 (3/4”)
18±0.5 0 ϕ39−0.025 (0.71±0.02)
30 max. (1.18 max.)
L1 mm 36.6 49.6 55.6
(0.1875+0.0016 0.0000)
Gearhead Product Name
4.763+0.040 0
Motor Product Name
39 (1.54)
Product Name
7.5 (0.30) 105 (4.13)
L2
4×ϕ8.5 (ϕ0.335) Thru 90 (3.54)
5 (0.20) 42±1 (1.65±0.04)
25±0.2 (0.984±0.008)
0
4.763−0.025 0.0000 (0.1875−0.0010 )
Torque Motors Watertight, Dust-Resistant Motors
Parallel Key (Included)
◇Lead Wire Type
A
90 (3.54) No.12-24 UNC 12 (0.47) Deep
(
0.0000 0.1875−0.0010
Technical Support
)
+0.381 0 +0.015 0.106 0.000
Brake Pack
2.692
(
) Accessories
4×ϕ8.5 (ϕ0.335) Thru A-A
Installation
.5 4±0 ) ϕ10 ±0.02
.09 (ϕ4
22.5°
www.orientalmotor.com
0
4.763−0.025
Parallel Key (Included)
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
CAD Data Manuals
(0.984±0.008)
Linear Heads
+0.040
25±0.2
0.0000 [ϕ0.7500−0.0005 (3/4”)]
A1393A A1393B A1393C
0
0
ϕ19.050−0.013
3.8 8.4
Right-Angle Gearheads
4.763 0 (0.1875+0.0016 0.0000)
34 (1.34) 25 (0.98) A
in. 1.77 2.28 2.52
2D CAD
5 max. (0.20 max.)
16.5 (0.65)
5 (0.20)
42±1 (1.65±0.04)
mm 45 58 64
Mass kg lb.
0.0000 (0.1875−0.0010 )
7.5 (0.30)
L
L
4.763−0.025
5GVH□A
5∼18 25∼100 120∼300
5IK60VGVH-ES
105 (4.13)
ϕ89 (ϕ3.50)
Gear Ratio
90 (3.54)
5IK60VES-□A
Gearhead Product Name
0.0000 (ϕ1.5354−0.0010 )
Motor Product Name
18±0.5 0 ϕ39−0.025 (0.71±0.02)
Product Name
Protective Earth Terminal M4 21.5 (0.85) Detail Drawing of Protective Earth Terminal
TEL: (800) 468-3982 E-mail: [email protected]
C-33
C-34 Three-Phase Induction Motors ●Round Shaft Type ◇Terminal Box Type
15 W (1/150 HP)
60 W (1/12 HP)
46 (1.81) 0.0000 (ϕ3.2677−0.0014 )
0
90 (3.54)
0
90 (3.54) 4×ϕ6.5 (ϕ0.256) Thru .5
)
4±0 ϕ10 9±0.02) 0 . 4 ϕ ( 90 (3.54)
(
40 W (1/19 HP)
ϕ89 (ϕ3.50)
25 W (1/30 HP)
7.5 (0.30)
37±1 (1.46±0.04) 2 (0.08)
0
105 (4.13)
0.0000 (ϕ0.4724−0.0007 )
5IK60VA-ES Mass: 2.3 kg (5.1 lb.) A1226
ϕ12−0.018
6W (1/125 HP)
◇Lead Wire Type
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
Induction Motors
4×ϕ6.5 (ϕ0.256) Thru 90 (3.54)
2 (0.08) 37±1 (1.46±0.04)
7.5 (0.30) 105 (4.13)
100 W (1/8 HP)
±0.5
ϕ104 2) ±0.0 (ϕ4.09
ϕ83−0.035
60 W (1/12 HP)
0.0000 (ϕ0.4724−0.0007 )
Applicable Cable Size Outer Diameter ϕ8∼ϕ13 mm (ϕ0.31∼ϕ0.51 in.)
High-Efficiency K S Series
76.5 (3.01)
ϕ12−0.018
23 (0.91)
Electromagnetic Brake Motors
1 (0.04)
76.5 (3.01)
ϕ89 (ϕ3.50)
Induction Motors
5IK60VA-EST2 Mass: 2.6 kg (5.7 lb.) A1315 30 max. (1.18 max.)
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
22.5°
5 max. (0.20 max.)
90 W (1/8 HP)
16.5 (0.65)
BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Protective Earth Terminal M4 21.5 (0.85) Detail Drawing of Protective Earth Terminal
C-34
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-35
Induction Motors
100 W (1/8 HP) □90 mm (□3.54 in.) Right-Angle Geared Type
Terminal Box Type
Lead Wire Type
Constant Speed Motors
■Specifications – Continuous Rating Product Name Upper Level: Terminal Box Type Lower Level: Lead Wire Type Hollow Shaft Type 5IK100VEST2-GHR□ 5IK100VES-GHR□
Speed r/min
50 Hz 60 Hz
Rated Torque Upper Level: N·m Lower Level: lb-in
50 Hz
Starting Torque Upper Level: N·m Lower Level: lb-in
50 Hz
60 Hz
60 Hz
Permissible Load Inertia Upper Level: J×10-4 kg·m2 Lower Level: oz-in2
Hollow Shaft✽
Solid Shaft
Solid Shaft Type (L shaft)
5IK100VEST2-GAR□ 5IK100VES-GAR□
Gear Ratio
Permissible Radial Load Upper Level: N Lower Level: lb.
Output
Solid Shaft Type (R shaft)
Instantaneous Stop
5IK100VEST2-GAL□ 5IK100VES-GAL□ 7.5 200 240 3.3 29 3.0 26 4.2 37 3.4 30 100 550 61.9 340
10 150 180 4.5 39 4.2 37 5.7 50 4.6 40 190 1040 110 600
15 100 120 7.0 61 6.4 56 8.8 77 7.1 62 420 2300 248 1360
20 75 90 9.4 83 8.7 76 11.8 104 9.6 84 700 3800 440 2400 1200 270 1100 240 900 200 1000 220
10 mm (0.39 in.) from Installation Surface 20 mm (0.79 in.) from Installation Surface 10 mm (0.39 in.) from End of Output Shaft 20 mm (0.79 in.) from End of Output Shaft
25 60 72 11.8 104 10.9 96 14.8 130 12.0 106 1100 6000 688 3800
✽The radial load at each distance can be calculated with a formula. ➜ Page C-16 ●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 80 Hz or less when driving in combination with the inverter. Note ●Do not perform instantaneous bi-directional operations.
●Hollow Shaft Type
Terminal Box 5IK100VEST2-GHR□ Type
Lead Wire Type
5IK100VES-GHR□
Frequency
Current
Hz 50 60 50 60
A 0.55 0.52 0.57 0.52
W
HP
VAC
1/8
Three-Phase 220
100
1/8
Three-Phase 230
30 50 60 14.3 126 13.2 116 17.9 158 14.5 128 1600 8800 990 5400
40 50 60 75 100 120 150 200 240 37 30 25 20 15 12.5 10 7.5 6.2 45 36 30 24 18 15 12 9 7.5 19.2 24.0 28.9 36.2 48.4 58.2 67.9 70 70 169 210 250 320 420 510 600 610 610 17.7 22.2 26.7 33.4 44.7 53.7 62.7 70 70 156 196 230 290 390 470 550 610 610 24.0 30.0 36.1 45.2 60.4 70 70 70 70 210 260 310 400 530 610 610 610 610 19.5 24.4 29.4 36.8 49.2 59.1 69.0 70 70 172 210 260 320 430 520 610 610 610 2800 4500 6000 8000 12000 17000 25000 25000 25000 15300 25000 33000 44000 66000 93000 137000 137000 137000 1760 2750 2750 2750 2750 2750 2750 2750 2750 9600 15000 15000 15000 15000 15000 15000 15000 15000 2200 490 2000 450 1700 380 1850 410 350 78
Three-Phase Induction Motors Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
◇Load Position ●Hollow Shaft Type
●Solid Shaft Type
Radial Load
Brake Pack
Radial Load Axial Load
Axial Load 10 mm (0.39 in.) 20 mm (0.79 in.)
10 mm (0.39 in.) 20 mm (0.79 in.) Distance from Installation Surface
■Product Line Product Name
Voltage
100
Permissible Axial Load Upper Level: N Lower Level: lb.
Type
Overview, Product Series
Accessories
Installation
Distance from Output Shaft End
●Solid Shaft Type Gear Ratio 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240
List Price $352.00 $336.00 $340.00 $347.00 $380.00 $407.00 $475.00 $329.00 $314.00 $317.00 $325.00 $358.00 $385.00 $453.00
Type
Product Name
Terminal Box 5IK100VEST2-GAR□ Type 5IK100VEST2-GAL□
Lead Wire Type
5IK100VES-GAR□ 5IK100VES-GAL□
Gear Ratio 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240
The following items are included with each product.
The following items are included with each product.
Geared Motor, Installation Screws, Parallel Key, Safety Cover, Operating Manual
Geared Motor, Installation Screws, Parallel Key, Operating Manual
List Price $317.00 $302.00 $306.00 $312.00 $347.00 $374.00 $440.00 $295.00 $280.00 $284.00 $290.00 $325.00 $352.00 $418.00
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-35
C-36 Three-Phase Induction Motors ■Dimensions
Unit = mm (in.)
● Installation screws are included. Dimensions for installation screws➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name. Induction Motors
●Terminal Box Type ◇Hollow Shaft Type 5 (0.20) 4 (0.16) +0.21 0
(ϕ1.0315+0.0083 0.0000)
76.5 (3.01) 0 ϕ58−0.046
30 max. (1.18 max.)
0.0000 (ϕ2.2835−0.0018 )
A
A
21 (0.83)
4×ϕ8.5 (ϕ0.335) Thru
ϕ62 (ϕ2.44)
0 8−0.036
15 (0.59)
60 W (1/12 HP)
98 (3.86)
0.0000 (0.3150−0.0014 )
21 (0.83)
40 W (1/19 HP)
(0.3150+0.0016 0.0000)
37 (1.46)
25 W (1/30 HP)
131.6 (5.18) 124 (4.88) 45.5 (1.79) 70 (2.76) 37 +0.040 (1.46) 8 0
ϕ89 (ϕ3.50)
37 (1.46) 28.3 (1.11)
39 (1.54) 90 (3.54)
Safety Cover (Included)
0
40−0.3
0
7−0.090 0.0000 (0.2756−0.0035 )
10 (0.39)
0.000 (1.575−0.012 )
23 (0.91)
260 (10.24) 76.5 (3.01) 49 (1.93)
6W (1/125 HP)
90 W (1/8 HP)
Safety Cover (Included)
Parallel Key (Included)
◇Solid Shaft Type (R shaft) A1319
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
0
18.5−0.1
0
6−0.030
0.000 0.728−0.004
(
0.0000 (0.2362−0.0012 )
Parallel Key (Included)
)
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
A
M6×12 (0.47) Deep
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
30 max. (1.18 max.)
260 (10.24)
ϕ89 (ϕ3.50)
A
131.6 (5.18) 124 (4.88) 45.5 (1.79) 70 (2.76) 37 (1.46) 24.5 (0.96)
37 (1.46)
0
0.0000 (ϕ2.2835−0.0018 )
ϕ58−0.046
0
5 (0.20) 4 (0.16) 32 (1.26)
0.0000 (ϕ0.8661−0.0008 )
48±1 (1.89±0.04) 40±0.5 (1.57±0.02)
ϕ22−0.021
98 (3.86) 76.5 (3.01) 49(1.93)
37 (1.46)
90 (3.54)
39 (1.54)
4 (0.16)
76.5 (3.01)
23 (0.91)
32±0.2 (1.260±0.008)
0
0.0000
6−0.030 (0.2362−0.0012)
5IK100VEST2-GAR□ Mass: 7.1 kg (15.6 lb.)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
C-36
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
0.0000 (ϕ2.2835−0.0018 )
ϕ26.2
+0.033 0
ϕ40 (ϕ1.57)
ϕ58−0.046
A-A
Induction Motors
BH Series 200 W (1/4 HP)
ϕ40 (ϕ1.57)
5 (0.20) 4 (0.16)
0
30 (1.18) 15 (0.59) 1.35 (0.05)
ϕ25
100 W (1/8 HP)
15 W (1/150 HP)
A1318
(ϕ0.9843+0.0013 0.0000)
+0.033 0
30 (1.18) 15 (0.59) 1.35 (0.05)
108 (4.25)
ϕ25
60 W (1/12 HP)
ϕ26.2
+0.21 0
High-Efficiency K S Series
(ϕ0.9843+0.0013 0.0000)
5IK100VEST2-GHR□ Mass: 7.1 kg (15.6 lb.)
(ϕ1.0315+0.0083 0.0000)
Electromagnetic Brake Motors
4×ϕ8.5 (ϕ0.335) Thru
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-37
◇Solid Shaft Type (L shaft) A1320 0.0000
Mass: 7.1 kg (15.6 lb.)
6−0.030 (0.2362−0.0012)
5IK100VEST2-GAL□
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
0
32±0.2 (1.260±0.008)
0
6−0.030
(
0.0000 (0.2362−0.0012 )
Parallel Key (Included) 30 max. (1.18 max.)
0 18.5−0.1 0.000 0.728−0.004
Overview, Product Series
) Constant Speed Motors
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
76.5 (3.01)
Three-Phase Induction Motors Single-Phase Induction Motors
4 (0.16) Reversible Motors
39 (1.54)
0
0.0000 (ϕ0.8661−0.0008 )
0
90 (3.54)
37 (1.46) 4×ϕ8.5 (ϕ0.335) Thru
5 (0.20) 4 (0.16) 32 (1.26)
98 (3.86) 76.5 (3.01) 49 (1.93)
A
37 (1.46)
ϕ89 (ϕ3.50)
ϕ22−0.021
0.0000 (ϕ2.2835−0.0018 )
48±1 (1.89±0.04) 40±0.5 (1.57±0.02)
131.6 (5.18) 124 (4.88) 70 (2.76) 45.5 (1.79) 37 (1.46) 24.5 (0.96)
ϕ58−0.046
23 (0.91)
260 (10.24)
A
Clutch & Brake Motors Low-Speed Synchronous Motors
M6×12 (0.47) Deep Torque Motors
●Lead Wire Type ◇Hollow Shaft Type
98 (3.86) 49 (1.93)
21 (0.83)
37 (1.46)
37 (1.46)
Right-Angle Gearheads
+0.040 8 0
(0.3150+0.0016 0.0000)
Linear Heads
A
Brake Pack
A Accessories
4×ϕ8.5 (ϕ0.335) Thru
Safety Cover (Included)
5 max. (0.20 max.)
260 (10.24)
124 (4.88) 70 (2.76)
45.5 (1.79)
90 (3.54)
21 (0.83)
Watertight, Dust-Resistant Motors
A1277
ϕ89 (ϕ3.50)
Mass: 6.8 kg (15.0 lb.)
37 (1.46) 28.3 (1.11)
5IK100VES-GHR□
Electromagnetic Brake Motors
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
22.5°
Installation 0
) (
ϕ40 (ϕ1.57)
)
30 (1.18) 15 (0.59) 1.35 (0.05)
(
108 (4.25)
ϕ58−0.046 0.0000 (ϕ2.2835−0.0018 )
ϕ62 (ϕ2.44)
8−0.036
0
40−0.3
0
15 (0.59)
A-A
5 (0.20) 4 (0.16)
ϕ40 (ϕ1.57)
0
7−0.09
116 (4.57) 0.0000
ϕ58−0.046 (ϕ2.2835−0.0018) 0
0.0000 (0.2756−0.0035 )
10 (0.39)
0.000 (1.575−0.012 )
0.0000 (0.3150−0.0014 )
5 (0.20) 4 (0.16)
ϕ25
16.5 (0.65)
+0.033 0 +0.0013 ϕ0.9843 0.0000 +0.21 ϕ26.2 0 +0.0083 ϕ1.0315 0.0000
+0.033 0
(ϕ0.9843+0.0013 0.0000)
30 (1.18) 15 (0.59) 1.35 (0.05)
ϕ25
+0.21 0
ϕ26.2
(ϕ1.0315+0.0083 0.0000)
Protective Earth Terminal M4
Safety Cover (Included)
CAD Data Manuals
Parallel Key (Included)
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-37
C-38 Three-Phase Induction Motors ◇Solid Shaft Type (R shaft)
37 (1.46)
16.5 (0.65)
0
6−0.030
32±0.2 (1.260±0.008)
0.0000 (0.2362−0.0012 )
0
Protective Earth Terminal M4
0
18.5−0.1
0
6−0.030
0.000 (0.728−0.004 )
0.0000 (0.2362−0.0012 )
A-A
Parallel Key (Included)
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
116 (4.57)
◇Solid Shaft Type (L shaft) A1279
0
90 (3.54) 5 max. (0.20 max.)
M6×12 (0.47) Deep Protective Earth Terminal M4 22.5°
32±0.2 (1.260±0.008)
0
4×ϕ8.5 (ϕ0.335) Thru
16.5 (0.65)
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
A
6−0.030
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
4 (0.16)
A
37 (1.46)
ϕ89 (ϕ3.50)
BH Series 200 W (1/4 HP)
37 (1.46)
90 W (1/8 HP)
98 (3.86) 49 (1.93)
32 (1.26)
0.0000 (0.2362−0.0012 )
60 W (1/12 HP)
0
124 (4.88) 70 (2.76) 45.5 (1.79) 37 (1.46) 24.5 (0.96)
0.0000 (ϕ0.8661−0.0008 )
48±1 40±0.5 (1.57±0.02) (1.89±0.04) 5 (0.20) 4 (0.16)
260 (10.24)
ϕ22−0.021
5IK100VES-GAL□ Mass: 6.8 kg (15.0 lb.) 40 W (1/19 HP)
0.0000 (ϕ2.2835−0.0018 )
25 W (1/30 HP)
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
22.5°
ϕ58−0.046
15 W (1/150 HP)
4×ϕ8.5 (ϕ0.335) Thru
M6×12 (0.47) Deep
Induction Motors
6W (1/125 HP)
0.0000 (ϕ2.2835−0.0018 )
A
5 max. (0.20 max.)
60 W (1/12 HP)
260 (10.24)
124 (4.88) 70 (2.76) 45.5 (1.79) 37 (1.46) 24.5 (0.96)
37 (1.46)
High-Efficiency K S Series
0
A
90 (3.54)
Electromagnetic Brake Motors
ϕ22−0.021
32 (1.26)
ϕ58−0.046
Induction Motors
0.0000 (ϕ0.8661−0.0008 )
4 (0.16)
100 W (1/8 HP)
A1278
48±1 (1.89±0.04) 40±0.5 (1.57±0.02)
98 (3.86) 49 (1.93) 5 (0.20) 4 (0.16)
ϕ89 (ϕ3.50)
5IK100VES-GAR□ Mass: 6.8 kg (15.0 lb.)
0
18.5−0.1
0
6−0.030 0.0000 (0.2362−0.0012 )
Parallel Key (Included)
0.000 (0.728−0.004 )
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
116 (4.57)
C-38
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-39
Induction Motors
100 W (1/8 HP) □90 mm (□3.54 in.) Parallel Shaft Combination Type/Round Shaft Type
Terminal Box Type
Lead Wire Type
Constant Speed Motors
■Specifications – Continuous Rating Product Name Upper Level: Combination Type Lower Level: Round Shaft Type Terminal Box Type
Output
Lead Wire Type
5IK100VEST2-□A 5IK100VA-EST2
5IK100VES-□A 5IK100VA-ES
Voltage
Frequency
Current
Hz 50 60 50 60
A 0.55 0.48 0.57 0.48
W
HP
VAC
100
1/8
Three-Phase 220
100
1/8
Three-Phase 230
Starting Torque mN•m 850 700 850 700
Rated Torque
oz-in 120 99 120 99
mN•m 690 570 690 570
Rated Speed
oz-in 97 80 97 80
r/min 1400 1680 1400 1680
Reversible Motors
Electromagnetic Brake Motors
■Product Line
Clutch & Brake Motors
Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed and they are also available separately. In addition, the gearhead can be removed and the assembly position can be changed in 90˚ increments.
●Combination Type with Parallel Shaft Type
Product Name
Terminal Box Type
5IK100VEST2-□A
Lead Wire Type
5IK100VES-□A
Three-Phase Induction Motors Single-Phase Induction Motors
●The values in the table are characteristics for the motor only. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
Combination Type
Overview, Product Series
Gearhead
Motor
Combination Type
=
+
Torque Motors
●Round Shaft Type
Gear Ratio 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60 75, 90, 100, 120, 150, 180 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60 75, 90, 100, 120, 150, 180
List Price $269.00 $289.00 $299.00 $248.00 $268.00 $278.00
Type Terminal Box Type Lead Wire Type
Low-Speed Synchronous Motors
Product Name 5IK100VA-EST2 5IK100VA-ES
Watertight, Dust-Resistant Motors
List Price $156.00 $135.00
Right-Angle Gearheads
The following items are included with each product. Motor, Operating Manual
Linear Heads
The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
Brake Pack
■Permissible Torque on Combination Types
Accessories
●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Product Name
Speed r/min Gear Ratio
5IK100VEST2-□A, 5IK100VES-□A
300
250
200
166
120
100
83
60
50
41
30
25
20
16.6
15
12.5
10
8.3
5 3.1 27
6 3.7 32
7.5 4.7 41
9 5.6 49
12.5 7.8 69
15 9.3 82
18 10.7 94
25 14.8 130
30 17.8 157
36 21.4 189
50 29.7 260
60 35.6 310
75 40 350
90 40 350
100 40 350
120 40 350
150 40 350
180 40 350
●60 Hz
Installation
Unit: Upper Values: N·m/Lower Values: lb-in
Product Name
Speed r/min Gear Ratio
5IK100VEST2-□A, 5IK100VES-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
20
18
15
12
10
5 2.6 23
6 3.1 27
7.5 3.8 33
9 4.6 40
12.5 6.4 56
15 7.7 68
18 8.8 77
25 12.3 108
30 14.7 130
36 17.6 155
50 24.5 210
60 29.4 260
75 34.6 300
90 40 350
100 40 350
120 40 350
150 40 350
180 40 350
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load.
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-39
C-40 Three-Phase Induction Motors
Induction Motors
■Permissible Radial Load and Permissible Axial Load
■Permissible Inertia J of Combination Types
➜
➜
Page C-17
■Dimensions
Page C-19
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215 Electromagnetic ● The terminal box cable outlet can be rotated and affixed in 4 possible directions. Brake Motors ● A number indicating the gear ratio is entered where the box □ is located within the product name.
●Combination Type ◇Terminal Box Type
5IK100VEST2-□A
5IK100VGVR-EST2
5GVR□A
5∼15 18∼36 50∼180
Mass kg lb.
2D CAD
4.7 10.3
A1396A A1396B A1396C
76.5 (3.01)
7.5 (0.30)
25 W (1/30 HP)
120 (4.72)
L2
4.763+0.040 0
39 (1.54)
+0.381 0 +0.015 0.106 0.000
2.692
(
±0.5 ϕ104 ±0.02) 9 (ϕ4.0
)
25±0.2 (0.984±0.008)
4×ϕ8.5 (ϕ0.335) Thru 90 (3.54)
5 (0.20) 42±1 (1.65±0.04)
)
A-A
0
A
No. 12-24 UNC 12 (0.47) Deep
4.763−0.025
15 W (1/150 HP)
in. 1.77 2.28 2.76
0.0000 [ϕ0.7500−0.0005 (3/4”)]
0
A
0
ϕ19.050−0.013
mm 45 58 70
90 (3.54)
25 (0.98)
L2 in. 1.44 1.95 2.43
0.0000 (ϕ1.5354−0.0010 )
34 (1.34)
18±0.5
L1
23 (0.91)
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
ϕ89 (ϕ3.50)
6W (1/125 HP)
30 max. (1.18 max.)
mm 36.6 49.6 61.6
0
4.763−0.025 0.0000 (0.1875−0.0010 )
(
Gear Ratio
(0.1875+0.0016 0.0000)
Gearhead Product Name
0.0000 0.1875−0.0010
Motor Product Name
100 W (1/8 HP)
Induction Motors
L1
Product Name 60 W (1/12 HP)
ϕ39−0.025 (0.71±0.02)
High-Efficiency K S Series
Parallel Key (Included)
5IK100VES-□A
5IK100VGVR-ES
5GVR□A
5∼15 18∼36 50∼180
90 W (1/8 HP)
Mass kg lb.
2D CAD
4.4 9.7
A1394A A1394B A1394C
5 (0.20)
ϕ89 (ϕ3.50)
7.5 (0.30)
42±1 (1.65±0.04) 34 (1.34) 25 (0.98) A
0.0000 [ϕ0.7500−0.0005 (3/4”)]
0
4.763−0.025 0.0000 (0.1875−0.0010 )
90 (3.54)
+0.381 0
A-A
Parallel Key (Included) No.12-24 UNC 12 (0.47) Deep
2.692
(0.106+0.015 0.000)
4×ϕ8.5 (ϕ0.335) Thru
.5
4±0 ϕ10 9±0.02) .0 (ϕ4
16.5 (0.65)
A
0
ϕ19.050−0.013
25±0.2 (0.984±0.008)
0.0000 (ϕ1.5354−0.0010 )
L
18±0.5 0 ϕ39−0.025 (0.71±0.02)
120 (4.72) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
22.5° Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
C-40
in. 1.77 2.28 2.76
0
BH Series 200 W (1/4 HP)
L mm 45 58 70
+0.040 0
Gear Ratio
4.763
Gearhead Product Name
0.0000 (0.1875−0.0010 )
Motor Product Name
4.763−0.025
Product Name 60 W (1/12 HP)
(0.1875+0.0016 0.0000)
◇Lead Wire Type
90 (3.54)
40 W (1/19 HP)
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Protective Earth Terminal M4 5 max. (0.20 max.)
21.5 (0.85)
Detail Drawing of Protective Earth Terminal
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-41
●Round Shaft Type ◇Terminal Box Type 5IK100VA-EST2 Mass: 3.2 kg (7.0 lb.)
A1317
46 (1.81)
Overview, Product Series Constant Speed Motors
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
)
0
ϕ12−0.018
23 (0.91)
±0.5
ϕ104 2) ±0.0 (ϕ4.09
90 (3.54)
Three-Phase Induction Motors Single-Phase Induction Motors
(
ϕ89 (ϕ3.50)
Applicable Cable Size Outer Diameter ϕ8∼ϕ13 mm (ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
1 (0.04)
76.5 (3.01)
0.0000 (ϕ0.4724−0.0007 )
30 max. (1.18 max.)
7.5 (0.30) 120 (4.72)
4×ϕ6.5 (ϕ0.256) Thru 90 (3.54)
2 (0.08) 37±1 (1.46±0.04)
Reversible Motors
◇Lead Wire Type 5IK100VA-ES Mass: 2.9 kg (6.4 lb.)
Electromagnetic Brake Motors
90 (3.54)
Clutch & Brake Motors
4×ϕ6.5 (ϕ0.256) Thru
4 ϕ10 9±0.02) 0 (ϕ4. 90 (3.54)
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
16.5 (0.65)
Torque Motors
(
ϕ89 (ϕ3.50)
Low-Speed Synchronous Motors
5 ± 0.
)
0
7.5 (0.30)
37±1 (1.46±0.04) 2 (0.08)
ϕ12−0.018
120 (4.72)
0.0000 (ϕ0.4724−0.0007 )
A1228
Motor Leads 300 mm (12 in.) Length UL Style 3271, AWG20
22.5°
Watertight, Dust-Resistant Motors
Protective Earth Terminal M4 5 max. 21.5 (0.20 max.) (0.85)
Right-Angle Gearheads
Detail Drawing of Protective Earth Terminal Linear Heads
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-41
C-42 Three-Phase Induction Motors Electromagnetic Brake Type Motors
60 W (1/12 HP) Induction Motors
□90 mm (□3.54 in.) Parallel Shaft Combination Type/Round Shaft Type Terminal Box Type
Cable Type
Electromagnetic Brake Motors
High-Efficiency K S Series
■Specifications – Continuous Rating Product Name Upper Level: Combination Type Lower Level: Round Shaft Type
60 W (1/12 HP)
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
Terminal Box Type
Output
Cable Type
5IK60VESMT2-□A 5IK60VA-ESMT2
5IK60VESM-□A 5IK60VA-ESM
25 W (1/30 HP)
Frequency
Current
Hz 50 60 50 60
A 0.37 0.33 0.38 0.33
W
HP
VAC
60
1/12
Three-Phase 220
60
1/12
Three-Phase 230
Starting Torque mN•m 600 500 600 500
oz-in 85 71 85 71
Rated Torque mN•m 410 350 410 350
Rated Speed
oz-in 58 49 58 49
r/min 1400 1670 1400 1670
●The values in the table are characteristics for the motor only. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
●Electromagnetic Brake (Power off activated type) Voltage VAC
Product Name 15 W (1/150 HP)
Voltage
Terminal Box Type
Cable Type
5IK60VESMT2-□A 5IK60VA-ESMT2
5IK60VESM-□A 5IK60VA-ESM
Single-Phase 220 Single-Phase 230
Frequency Hz 50 60 50 60
Current A
Input W
Static Friction Torque mN•m oz-in
0.04
6
500
71
0.04
6
500
71
●The values in the table are characteristics for the motor only. 40 W (1/19 HP)
■Product Line
60 W (1/12 HP)
90 W (1/8 HP) BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Combination Type
Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed and they are also available separately. In addition, the gearhead can be removed and the assembly position can be changed in 90˚ increments.
●Combination Type with Parallel Shaft Type
Product Name
Terminal 5IK60VESMT2-□A Box Type
Cable Type
5IK60VESM-□A
List Price $384.00 $395.00 $405.00 $439.00 $362.00 $373.00 $383.00 $417.00
Type Terminal Box Type Cable Type
Product Name 5IK60VA-ESMT2 5IK60VA-ESM
The following items are included with each product. Motor, Operating Manual
The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
●A number indicating the gear ratio is entered where the box □ is located within the product name.
C-42
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
=
●Round Shaft Type
Gear Ratio 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60, 75, 90, 100 120, 150, 180 250, 300 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60, 75, 90, 100 120, 150, 180 250, 300
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Gearhead
Motor
Combination Type
List Price $272.00 $250.00
+
Standard AC Motors
C-43
■Permissible Torque on Combination Types ●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min
Product Name
Gear Ratio 5IK60VESMT2-□A 5IK60VESM-□A
300
250
200
166
100
83
60
50
41
30
25
20
16.6
5 1.8 15.9
6 2.2 19.4
7.5 2.8 24
9 12.5 15 3.3 4.6 5.5 29 40 48
120
18 6.6 58
25 8.8 77
30 10.6 93
36 12.7 112
50 17.6 155
60 21.2 187
75 26.4 230
90 30 260
●60 Hz
15
12.5
10
8.3
6
5
100 120 150 180 250 300 30 30 30 30 30 30 260 260 260 260 260 260 Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min
Product Name
Gear Ratio 5IK60VESMT2-□A 5IK60VESM-□A
360
300
240
200
144
120
100
72
60
50
36
30
24
20
5 1.6 14.1
6 1.9 16.8
7.5 2.4 21
9 12.5 15 2.8 3.9 4.7 24 34 41
18 5.7 50
25 7.5 66
30 9.0 79
36 10.8 95
50 15.1 133
60 18.1 160
75 22.6 200
90 27.1 230
18
15
12
10
7.2
100 120 150 180 250 300 30 30 30 30 30 30 260 260 260 260 260 260
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load. ●A number indicating the gear ratio is entered where the box □ is located within the product name.
■Permissible Radial Load and Permissible Axial Load
■Permissible Inertia J of Combination Types
➜
➜
Page C-17
Page C-19
■ Starting and Braking Characteristics (Reference values - motor only)
6
Overview, Product Series Constant Speed Motors Three-Phase Induction Motors Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
200 Three-Phase 50 Hz
Torque Motors
Three-Phase 60 Hz
Watertight, Dust-Resistant Motors
5 4 3 2
Braking Time Starting Time
Time [ms]
Overrun [Rotations]
150
Right-Angle Gearheads
100
Linear Heads
50
Overrun
Brake Pack
1 0
0
0.25
0
1
0.5
2
3
0.75
4 Inertia J
CAD Data Manuals
1
5
1.25 [×10-4 kg·m2] 6
7
Accessories
8 Installation
[oz-in2]
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-43
C-44 Three-Phase Induction Motors ■Dimensions
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name. Induction Motors
●Combination Type ◇Terminal Box Type
5IK60VESMT2-□A
5IK60VGVH-ESMT2
5GVH□A
5∼18 25∼100 120∼300
7.5 (0.30) 15 W (1/150 HP)
40 (1.57) ±0.5 ϕ104 ±0.02) 9 (ϕ4.0
42±1 (1.65±0.04)
(
)
0
4.763−0.025 0.0000 (0.1875−0.0010 )
Parallel Key (Included)
5GVH□A
5∼18 25∼100 120∼300
60 W (1/12 HP)
7.5 (0.30)
5 (0.20)
BH Series 200 W (1/4 HP)
42±1 (1.65±0.04) 34 (1.34) 25 (0.98)
ϕ88 (ϕ3.46)
A
5 max. (0.20 max.)
A
80 (3) 32.5 (1.28)
1000 (3.3 ft.)
2D CAD
4.5 9.9
A1397A A1397B A1397C
25±0.2 (0.984±0.008)
0.0000 [ϕ0.7500−0.0005 (3/4”)]
0
4.763−0.025 0.0000 (0.1875−0.0010 )
Parallel Key (Included)
No.12-24 UNC 12 (0.47) Deep
+0.381 0
(0.106+0.015 0.000) A-A
±0.5
ϕ104 ±0.02) 9 (ϕ4.0
27 (1.06)
Protective Earth Terminal M4
20 (0.79)
Detail Drawing of Protective Earth Terminal
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
2.692
90 (3.54)
4×ϕ8.5 (ϕ0.335) Thru
✽Motor Cable ϕ8 (ϕ0.31)
Mass kg lb.
0
ϕ19.050−0.013
0.0000 (ϕ1.5354−0.0010 )
L
18±0.5 0 ϕ39−0.025 (0.71±0.02)
149 (5.87)
90 W (1/8 HP)
in. 1.77 2.28 2.52
7.5 (0.30)
5IK60VGVH-ESM
mm 45 58 64
+0.040
Gear Ratio
0
5IK60VESM-□A
L
Gearhead Product Name
0.0000 (0.1875−0.0010 )
Motor Product Name
4.763 0 (0.1875+0.0016 0.0000)
◇Cable Type Product Name
C-44
+0.381 0 +0.015 0.106 0.000
2.692
A-A
25±0.2 (0.984±0.008)
4×ϕ8.5 (ϕ0.335) Thru 90 (3.54)
5 (0.20) L
149 (5.87)
40 W (1/19 HP)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
No. 12-24 UNC 12 (0.47) Deep
4.763−0.025
25 W (1/30 HP)
A1399A A1399B A1399C
0
A
4.8 10.6
90 (3.54)
6W (1/125 HP)
2D CAD
14.5 (0.57)
Induction Motors
ϕ88 (ϕ3.46)
A
Mass kg lb.
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
76.5 (3.01)
0.0000 [ϕ0.7500−0.0005 (3/4”)]
25 (0.98)
23 (0.91)
100 W (1/8 HP)
0
ϕ19.050−0.013
34 (1.34)
in. 1.77 2.28 2.52
90 (3.54)
72.5 (2.85)
0.0000 (ϕ1.5354−0.0010 )
76.5 (3.01) 30 max. (1.18 max.)
60 W (1/12 HP)
mm 45 58 64
0.0000 (0.1875−0.0010 )
Gear Ratio
+0.040
Gearhead Product Name
4.763 0 (0.1875+0.0016 0.0000)
Motor Product Name
18±0.5 0 ϕ39−0.025 (0.71±0.02)
High-Efficiency K S Series
L
Product Name
4.763−0.025
Electromagnetic Brake Motors
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-45
●Round Shaft Type ◇Terminal Box Type A1322 Applicable Cable Size Outer Diameter ϕ8∼ϕ13 mm (ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
Overview, Product Series
0
ϕ12−0.018
40 (1.57)
72.5 (2.85) 30 max. (1.18 max.) 23 (0.91)
76.5 (3.01)
Mass: 3.3 kg (7.3 lb.)
0.0000 (ϕ0.4724−0.0007 )
5IK60VA-ESMT2
Constant Speed Motors
.5
90 (3.54)
Three-Phase Induction Motors Single-Phase Induction Motors
(
ϕ88 (ϕ3.46)
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
)
4±0 ϕ10 9±0.02) 0 (ϕ4.
7.5 (0.30) 149 (5.87)
4×ϕ6.5 (ϕ0.256) Thru 90 (3.54)
2 (0.08) 37±1 (1.46±0.04)
Reversible Motors
◇Cable Type
Electromagnetic Brake Motors
Mass: 3.0 kg (6.6 lb.)
A1283
±0.5 ϕ104 .02) ±0 (ϕ4.09
20 (0.79)
Protective Earth Terminal M4
32.5 (1.28)
80 (3) 1000 (3.3 ft.)
4×ϕ6.5 (ϕ0.256) Thru
✽Motor Cable ϕ8 (ϕ0.31)
27 (1.06)
14.5 (0.57)
5 max. (0.20 max.)
(
90 (3.54)
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
ϕ88 (ϕ3.46)
7.5 (0.30)
90 (3.54)
)
0
Clutch & Brake Motors
(
7.5 (0.30)
37±1 (1.46±0.04) 2 (0.08)
ϕ12−0.018
149 (5.87)
0.0000 ϕ0.4724−0.0007
)
5IK60VA-ESM
Detail Drawing of Protective Earth Terminal
Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
✽Motor Cable Core 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
Brake Pack
Accessories
Installation
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-45
C-46 Three-Phase Induction Motors Electromagnetic Brake Type Motors
100 W (1/8 HP) Induction Motors
Electromagnetic Brake Motors
□90 mm (□3.54 in.) Right-Angle Geared Type Terminal Box Type
■Specifications – Continuous Rating
Hollow Shaft Type
60 W (1/12 HP)
Induction Motors
6W (1/125 HP)
15 W (1/150 HP)
25 W (1/30 HP)
40 W (1/19 HP)
Solid Shaft Type (R shaft)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Solid Shaft Type (L shaft)
Gear Ratio Speed r/min
50 Hz 60 Hz
Rated Torque Upper Level: N•m Lower Level: lb-in
50 Hz
Starting Torque Upper Level: N•m Lower Level: lb-in
50 Hz
60 Hz
60 Hz
Permissible Load Inertia Upper Level: J×10-4 kg•m2 Lower Level: oz-in2
Hollow Shaft✽ Permissible Radial Load Upper Level: N Lower Level: lb. Solid Shaft
BH Series 200 W (1/4 HP)
Output
5IK100VESMT2-GHR□ 5IK100VESMT2-GAR□ 5IK100VESMT2-GAL□ 5IK100VESM-GHR□ 5IK100VESM-GAR□ 5IK100VESM-GAL□
60 W (1/12 HP)
90 W (1/8 HP)
Motor
Product Name Upper Level: Terminal Box Type Lower Level: Cable Type
High-Efficiency K S Series
100 W (1/8 HP)
Cable Type
Instantaneous Stop
7.5 200 240 3.3 29 3.0 26 4.2 37 3.4 30 100 550 61.9 340
10 150 180 4.5 39 4.2 37 5.7 50 4.6 40 190 1040 110 600
W
Voltage
Frequency Current
HP
VAC
100
1/8
Three-Phase 220
100
1/8
Three-Phase 230
15 100 120 7.0 61 6.4 56 8.8 77 7.1 62 420 2300 248 1360
10 mm (0.39 in.) from Installation Surface 20 mm (0.79 in.) from Installation Surface 10 mm (0.39 in.) from End of Output Shaft 20 mm (0.79 in.) from End of Output Shaft
20 75 90 9.4 83 8.7 76 11.8 104 9.6 84 700 3800 440 2400 1200 270 1100 240 900 200 1000 220
Permissible Axial Load Upper Level: N Lower Level: lb. ✽The radial load at each distance can be calculated with a formula. ➜ Page C-16 ●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 80 Hz or less when driving in combination with the inverter. Note ●Do not perform instantaneous bi-directional operations.
25 60 72 11.8 104 10.9 96 14.8 130 12.0 106 1100 6000 688 3800
Electromagnetic Brake (Power off activated type)
30 50 60 14.3 126 13.2 116 17.9 158 14.5 128 1600 8800 990 5400
Hz 50 60 50 60
A 0.55 0.52 0.57 0.52
Voltage VAC Single-Phase 220 Single-Phase 230
Hz 50 60 50 60
●Hollow Shaft Type
oz-in
0.04
6
500
71
0.04
6
500
71
Radial Load Axial Load
Axial Load 10 mm (0.39 in.) 20 mm (0.79 in.)
10 mm (0.39 in.) 20 mm (0.79 in.)
Distance from Output Shaft End
●A number indicating the gear ratio is entered where the box □ is located within the product name.
Page
mN•m
●Solid Shaft Type
Radial Load
Page C-52
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
W
◇Load Position
■Starting and Braking Characteristics (Reference values)
C-46
A
40 50 60 75 100 120 150 200 240 37 30 25 20 15 12.5 10 7.5 6.2 45 36 30 24 18 15 12 9 7.5 19.2 24.0 28.9 36.2 48.4 58.2 67.9 70 70 169 210 250 320 420 510 600 610 610 17.7 22.2 26.7 33.4 44.7 53.7 62.7 70 70 156 196 230 290 390 470 550 610 610 24.0 30.0 36.1 45.2 60.4 70 70 70 70 210 260 310 400 530 610 610 610 610 19.5 24.4 29.4 36.8 49.2 59.1 69.0 70 70 172 210 260 320 430 520 610 610 610 2800 4500 6000 8000 12000 17000 25000 25000 25000 15300 25000 33000 44000 66000 93000 137000 137000 137000 1760 2750 2750 2750 2750 2750 2750 2750 2750 9600 15000 15000 15000 15000 15000 15000 15000 15000 2200 490 2000 450 1700 380 1850 410 350 78
Distance from Installation Surface
➜
Static Friction Torque
Frequency Current Input
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-47
■Product Line ●Hollow Shaft Type Type
Product Name
Terminal Box Type 5IK100VESMT2-GHR□
Cable Type
5IK100VESM-GHR□
●Solid Shaft Type Gear Ratio 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240
List Price $484.00 $468.00 $472.00 $479.00 $512.00 $539.00 $607.00 $461.00 $446.00 $449.00 $457.00 $490.00 $517.00 $585.00
Type
Terminal Box Type
Cable Type
Product Name
5IK100VESMT2-GAR□ 5IK100VESMT2-GAL□
5IK100VESM-GAR□ 5IK100VESM-GAL□
Gear Ratio 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240 7.5 10, 15, 20 25, 30 40, 50 60 75, 100, 120 150, 200, 240
The following items are included with each product.
The following items are included with each product.
Geared Motor, Installation Screws, Parallel Key, Safety Cover, Operating Manual
Geared Motor, Installation Screws, Parallel Key, Operating Manual
List Price $449.00 $434.00 $438.00 $444.00 $479.00 $506.00 $572.00 $427.00 $412.00 $416.00 $422.00 $457.00 $484.00 $550.00
Overview, Product Series Constant Speed Motors Three-Phase Induction Motors Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-47
C-48 Three-Phase Induction Motors ■Dimensions
Unit = mm (in.)
● Installation screws are included. Dimensions for installation screws ➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name. Induction Motors
●Terminal Box Type ◇Hollow Shaft Type 5IK100VESMT2-GHR□ Mass: 7.7 kg (16.9 lb.)
0
5 (0.20) 4 (0.16)
ϕ58−0.046
)
0.0000 (ϕ2.2835−0.0018 )
+0.21 0 +0.0083 ϕ1.0315 0.0000
+0.033
ϕ40 (ϕ1.57)
(
30 (1.18) 15 (0.59) 1.35 (0.05)
ϕ26.2
(ϕ0.9843+0.0013 0.0000)
ϕ26.2 0 (ϕ1.0315+0.0083 0.0000) +0.033 ϕ25 0
+0.21
108 (4.25)
30 (1.18) 15 (0.59) 1.35 (0.05)
High-Efficiency K S Series 60 W (1/12 HP)
A1325
ϕ25 0 (ϕ0.9843+0.0013 0.0000)
Electromagnetic Brake Motors
5 (0.20) 4 (0.16)
100 W (1/8 HP) A-A 76.5 (3.01) 49 (1.93)
98 (3.86)
60 W (1/12 HP)
0
28.3 (1.11)
8
+0.040 0
(0.3150+0.0016 0.0000) A ϕ88 (ϕ3.46) A
4×ϕ8.5 (ϕ0.335) Thru
0
7−0.090
10 (0.39)
0.0000 (0.2756−0.0035 )
Safety Cover (Included)
Parallel Key (Included)
◇Solid Shaft Type (R shaft) 5IK100VESMT2-GAR□ Mass: 7.7 kg (16.9 lb.) 0.0000
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
A1326
0
32±0.2 (1.260±0.008)
0
18.5−0.1
0
6−0.030
0.000 (0.728−0.004 )
0.0000 (0.2362−0.0012 )
Parallel Key (Included)
A-A
30 max. (1.18 max.)
0.0000
) (
M6×12 (0.47) Deep
C-48
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
124 (4.88) 70 (2.76) 37 (1.46)
24.5 (0.96)
ϕ88 (ϕ3.46)
A
45.5 (1.79)
37 (1.46)
A
304 (11.97)
0
40±0.5 5 (0.20) (1.57±0.02) 4 (0.16) 32 (1.26)
76.5 (3.01)
37 (1.46)
90 (3.54)
40 (1.57)
76.5 (3.01) 49 (1.93)
48±1 (1.89±0.04)
0.0000 ϕ0.8661−0.0008
98 (3.86)
0 ϕ22−0.021
4 (0.16) Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
ϕ58−0.046 (ϕ2.2835−0.0018)
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
23 (0.91)
BH Series 200 W (1/4 HP)
0
40−0.3 0.000 (1.575−0.012 )
6−0.030 (0.2362−0.0012)
90 W (1/8 HP)
21 (0.83)
37 (1.46)
37 (1.46) 37 (1.46)
90 (3.54) 21 (0.83) ϕ62 (ϕ2.44)
8−0.036
40 W (1/19 HP)
Safety Cover (Included)
0.0000 (0.3150−0.0014 )
25 W (1/30 HP)
0
124 (4.88) 70 (2.76)
45.5 (1.79)
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
15 (0.59)
15 W (1/150 HP)
0.0000
ϕ58−0.046 (ϕ2.2835−0.0018) 304 (11.97)
40 (1.57)
6W (1/125 HP)
76.5 (3.01)
23 (0.91)
Induction Motors
30 max. (1.18 max.)
ϕ40 (ϕ1.57)
4×ϕ8.5 (ϕ0.335) Thru
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-49
◇Solid Shaft Type (L shaft) A1327
0.0000
Mass: 7.7 kg (16.9 lb.)
6−0.030 (0.2362−0.0012)
5IK100VESMT2-GAL□
76.5 (3.01)
0
18.5−0.1
0
6−0.030
0
32±0.2 (1.260±0.008)
Overview, Product Series Constant Speed Motors
0.000 (0.728−0.004 )
0.0000 (0.2362−0.0012 )
30 max. (1.18 max.) Parallel Key (Included)
Three-Phase Induction Motors
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
4×ϕ8.5 (ϕ0.335) Thru
A
A
76.5 (3.01) 49 (1.93)
4 (0.16) Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
Single-Phase Induction Motors Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors
90 (3.54)
0.0000 (ϕ0.8661−0.0008 )
0
37 (1.46)
5 (0.20) 4 (0.16) 32 (1.26)
37 (1.46)
ϕ88 (ϕ3.46)
0
ϕ58−0.046
24.5 (0.96)
ϕ22−0.021
23 (0.91)
37 (1.46)
0.0000 (ϕ2.2835−0.0018 )
40±0.5 (1.57±0.02)
124 (4.88) 70 (2.76) 45.5 (1.79)
98 (3.86)
40 (1.57)
48±1 (1.89±0.04)
304 (11.97)
Low-Speed Synchronous Motors
M6×12 (0.47) Deep
Torque Motors
●Cable Type ◇Hollow Shaft Type 5IK100VESM-GHR□
Mass: 7.5 kg (16.5 lb.)
A1291
98 (3.86) 49 (1.93)
304 (11.97)
21 (0.83) 28.3 (1.11)
21 (0.83)
Watertight, Dust-Resistant Motors
ϕ88 (ϕ3.46)
90 (3.54)
37 (1.46) 37 (1.46)
A
Accessories
5 (0.20) 4 (0.16)
)
0 ϕ58−0.046
0.0000 (ϕ2.2835−0.0018 )
32.5 (1.28)
20 (0.79)
(
0.0000
5 (0.20) 4 (0.16)
ϕ26.2
Installation
✽Motor Cable ϕ8 (ϕ0.31) ✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
+0.21 0 +0.0083 ϕ1.0315 0.0000
ϕ40 (ϕ1.57)
Brake Pack
Protective Earth Terminal M4 ϕ40 (ϕ1.57)
0 ϕ58−0.046
(
7.5 (0.30)
0.0000 ϕ2.2835−0.0018
)
0
7−0.09
0.0000 (0.2756−0.0035 )
10 (0.39)
0
15 (0.59)
0
40−0.3 0.000 (1.575−0.012 )
Linear Heads
A
14.5 (0.57) +0.033 0
30 (1.18) 15 (0.59) 1.35 (0.05)
A-A ϕ62 (ϕ2.44)
4×ϕ8.5 (ϕ0.335) Thru
(0.3150 +0.0016 0.0000)
80 (3) 1000 (3.3 ft.)
(ϕ0.9843+0.0013 0.0000)
5 max. (0.20 max.)
108 (4.25)
ϕ25
) (
30 (1.18) 15 (0.59) 1.35 (0.05)
27 (1.06)
8−0.036 (0.3150−0.0014)
)
ϕ26.2
+0.21 0 +0.0083 ϕ1.0315 0.0000 +0.033 ϕ25 0 +0.0013 ϕ0.9843 0.0000
(
Safety Cover (Included)
Right-Angle Gearheads
124 (4.88) 45.5 (1.79) 70 (2.76) 37 +0.040 (1.46) 8 0
Safety Cover (Included) CAD Data Manuals
www.orientalmotor.com
Parallel Key (Included) Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-49
C-50 Three-Phase Induction Motors ◇Solid Shaft Type (R shaft)
15 W (1/150 HP)
0.0000 ϕ2.2835−0.0018
32.5 (1.28) ✽Motor Cable ϕ8 (ϕ0.31)
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22 0.000
18.5−0.1 (0.728−0.004) 0
0
6−0.030 0.0000 (0.2362−0.0012 )
Parallel Key (Included)
80 (3) 1000 (3.3 ft.)
(
0.0000
32±0.2 (1.260±0.008)
0 6−0.030
(
0
0.0000 0.2362−0.0012
Induction Motors
4×ϕ8.5 (ϕ0.335) Thru
0 ϕ58−0.046
27 (1.06)
)
100 W (1/8 HP)
5 max. (0.20 max.)
14.5 (0.57)
60 W (1/12 HP)
)
A ϕ22−0.021 (ϕ0.8661−0.0008)
High-Efficiency K S Series
25 W (1/30 HP)
A
90 (3.54)
Electromagnetic Brake Motors
304 (11.97) 124 (4.88) 45.5 (1.79) 70 (2.76) 37 (1.46) 24.5 (0.96)
ϕ88 (ϕ3.46)
32 (1.26)
48±1 (1.89±0.04) 40±0.5 (1.57±0.02) M6×12 (0.47) Deep
20 (0.79)
Induction Motors
A1292
37 (1.46)
98 (3.86) 49 (1.93) 5 (0.20) 4 (0.16)
4 (0.16)
6W (1/125 HP)
Mass: 7.5 kg (16.5 lb.)
37 (1.46)
5IK100VESM-GAR□
A-A Protective Earth Terminal M4
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
7.5 (0.30)
◇Solid Shaft Type (L shaft) A1293
48±1 (1.89±0.04) 40±0.5 (1.57±0.02) 5 (0.20) 4 (0.16) 32 (1.26)
M6×12 (0.47) Deep
27 (1.06)
(
Protective Earth Terminal M4
20 (0.79)
7.5 (0.30)
(
0.0000
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
0.0000 ϕ0.8661−0.0008
✽Motor Cable ϕ8 (ϕ0.31)
0
80 (3) 1000 (3.3 ft.)
0 ϕ22−0.021
32.5 (1.28)
)
A ϕ58−0.046 (ϕ2.2835−0.0018)
37 (1.46)
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
A
37 (1.46)
BH Series 200 W (1/4 HP)
ϕ88 (ϕ3.46)
90 W (1/8 HP)
90 (3.54)
4×ϕ8.5 (ϕ0.335) Thru
4 (0.16)
98 (3.86) 49 (1.93)
14.5 (0.57)
60 W (1/12 HP)
124 (4.88) 70 (2.76) 45.5 (1.79) 37 (1.46) 24.5 (0.96)
5 max. (0.20 max.)
304 (11.97)
)
5IK100VESM-GAL□ Mass: 7.5 kg (16.5 lb.)
0.0000 0 6−0.030 0.2362−0.0012
40 W (1/19 HP)
32±0.2 (1.260±0.008)
0
18.5−0.1
0
6−0.030 0.0000 (0.2362−0.0012 )
Parallel Key (Included)
0.000 (0.728−0.004 )
A-A
●At the time of shipment, a parallel key is fixed in the key slot of the gearhead shaft.
C-50
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-51
Electromagnetic Brake Type Motors
100 W (1/8 HP) □90 mm (□3.54 in.) Parallel Shaft Combination Type/Round Shaft Type
Overview, Product Series Terminal Box Type
Cable Type Constant Speed Motors
■Specifications – Continuous Rating Product Name Upper Level: Combination Type Lower Level: Round Shaft Type Terminal Box Type
Cable Type
5IK100VESMT2-□A 5IK100VA-ESMT2
5IK100VESM-□A 5IK100VA-ESM
Three-Phase Induction Motors
Output
Voltage
Frequency
Current
Hz 50 60 50 60
A 0.55 0.48 0.57 0.48
W
HP
VAC
100
1/8
Three-Phase 220
100
1/8
Three-Phase 230
Starting Torque mN·m 850 700 850 700
oz-in 120 99 120 99
Rated Torque mN·m 690 570 690 570
Rated Speed
oz-in 97 80 97 80
r/min 1400 1680 1400 1680
●The values in the table are characteristics for the motor only. ●No built-in overheat protection device (thermal protector). When there is an overload or the output shaft is locked, use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. ●Use an inverter setting frequency of 120 Hz or less when driving in combination with the inverter.
Product Name Cable Type
5IK100VESMT2-□A 5IK100VA-ESMT2
5IK100VESM-□A 5IK100VA-ESM
Reversible Motors
Electromagnetic Brake Motors
Clutch & Brake Motors
●Electromagnetic Brake (Power off activated type) Terminal Box Type
Single-Phase Induction Motors
Voltage VAC Single-Phase 220 Single-Phase 230
Frequency Hz 50 60 50 60
Current A
Input W
Static Friction Torque mN·m oz-in
0.04
6
500
71
0.04
6
500
71
Low-Speed Synchronous Motors
Torque Motors
●The values in the table are characteristics for the motor only. Watertight, Dust-Resistant Motors
■Product Line Combination Type
Motor and gearhead are delivered pre-assembled. The combination of motors and gearheads can be changed and they are also available separately. In addition, the gearhead can be removed and the assembly position can be changed in 90˚ increments.
●Combination Type with Parallel Shaft Type
Product Name
Terminal Box Type
5IK100VESMT2-□A
Cable Type 5IK100VESM-□A
=
List Price $404.00 $424.00 $434.00 $382.00 $402.00 $412.00
Type Terminal Box Type Cable Type
Product Name 5IK100VA-ESMT2 5IK100VA-ESM
+
Right-Angle Gearheads
Linear Heads
Brake Pack
●Round Shaft Type
Gear Ratio 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60 75, 90, 100, 120, 150, 180 5, 6, 7.5, 9, 12.5, 15, 18 25, 30, 36, 50, 60 75, 90, 100, 120, 150, 180
Gearhead
Motor
Combination Type
List Price $291.00 $269.00
Accessories
The following items are included with each product. Motor, Operating Manual
Installation
The following items are included with each product. Motor, Gearhead, Installation Screws, Parallel Key, Operating Manual
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-51
C-52 Three-Phase Induction Motors ■Permissible Torque on Combination Types ●50 Hz
Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min
Product Name Induction Motors
Electromagnetic Brake Motors
100 W (1/8 HP)
Induction Motors
6W (1/125 HP)
250
200
166
120
100
83
60
50
41
30
25
20
16.6
5 3.1 27
6 3.7 32
7.5 4.7 41
9 5.6 49
12.5 7.8 69
15 9.3 82
18 10.7 94
25 14.8 130
30 17.8 157
36 21.4 189
50 29.7 260
60 35.6 310
75 40 350
90 40 350
5IK100VESMT2-□A 5IK100VESM-□A
●60 Hz 360
300
240
200
144
120
100
72
60
50
36
30
24
20
5 2.6 23
6 3.1 27
7.5 3.8 33
9 4.6 40
12.5 6.4 56
15 7.7 68
18 8.8 77
25 12.3 108
30 14.7 130
36 17.6 155
50 24.5 210
60 29.4 260
75 34.6 300
90 40 350
Gear Ratio 5IK100VESMT2-□A 5IK100VESM-□A
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
12
Page C-19
■Starting and Braking Characteristics (Reference values - motor only)
Three-Phase 50 Hz Three-Phase 60 Hz
Braking Time
5
3
Time [ms]
Overrun [Rotations]
150
4
100 Starting Time
50
Overrun
1 0
8.3
0
0.25
0
1
0.5
2
3
0.75
4
1
5
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
1.25 [×10-4 kg·m2] 6
7
8
[oz-in2]
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
10
100 120 150 180 40 40 40 40 350 350 350 350
➜
Page C-17
Inertia J
C-52
15
➜
2 BH Series 200 W (1/4 HP)
18
■Permissible Inertia J of Combination Types
200
90 W (1/8 HP)
10
■Permissible Radial Load and Permissible Axial Load
25 W (1/30 HP)
60 W (1/12 HP)
12.5
●The speed is calculated by dividing the motor's synchronous speed (50 Hz: 1500 r/min, 60 Hz: 1800 r/min) by the gear ratio. The actual speed is 2∼10% less, depending on the load. ●A number indicating the gear ratio is entered where the box □ is located within the product name.
15 W (1/150 HP)
40 W (1/19 HP)
15
100 120 150 180 40 40 40 40 350 350 350 350
Unit: Upper Values: N·m/Lower Values: lb-in
Speed r/min
Product Name
High-Efficiency K S Series 60 W (1/12 HP)
300
Gear Ratio
Standard AC Motors ■Dimensions
C-53
Unit = mm (in.)
● Installation screws are included with the combination type. Dimensions for installation screws ➜ Page C-215 ● The terminal box cable outlet can be rotated and affixed in 4 possible directions, and the cable type cable outlet in 2 possible directions. ● A number indicating the gear ratio is entered where the box □ is located within the product name. Overview, Product Series
●Combination Type ◇Terminal Box Type Gear Ratio
5IK100VESMT2-□A
5IK100VGVR-ESMT2
5GVR□A
5∼15 18∼36 50∼180
5.4 11.9
A1400A A1400B A1400C
Constant Speed Motors Three-Phase Induction Motors
Applicable Cable Size Outer Diameter ϕ7∼ϕ13 mm (ϕ0.28∼ϕ0.51 in.)
76.5 (3.01) (3/4”)]
No. 12-24 UNC 12 (0.47) Deep
Single-Phase Induction Motors
7.5 (0.30)
(
±0.5
25±0.2 (0.984±0.008)
4×ϕ8.5 (ϕ0.335) Thru 90 (3.54)
42±1 (1.65±0.04)
L
164 (6.46)
)
Reversible Motors
A-A
ϕ104 ±0.02) 9 (ϕ4.0
5 (0.20)
+0.381 0 +0.015 0.106 0.000
2.692
0
A
2D CAD
40 (1.57)
[
Mass kg lb.
4.763−0.025
ϕ88 (ϕ3.46)
A
0.0000 ϕ0.7500−0.0005
in. 1.77 2.28 2.76
90 (3.54)
25 (0.98)
0
ϕ19.050−0.013
0.0000 (ϕ1.5354−0.0010 )
34 (1.34)
18±0.5 0 ϕ39−0.025 (0.71±0.02)
87.5 (3.44)
23 (0.91)
76.5 (3.01) 30 max. (1.18 max.)
L mm 45 58 70
0.0000 (0.1875−0.0010 )
Gearhead Product Name
+0.040
Motor Product Name
4.763 0 (0.1875+0.0016 0.0000)
Product Name
Electromagnetic Brake Motors
Clutch & Brake Motors
0
4.763−0.025 0.0000 (0.1875−0.0010 )
Low-Speed Synchronous Motors
Parallel Key (Included)
◇Cable Type
34 (1.34) 25 (0.98) A
0
ϕ19.050−0.013 0.0000 [ϕ0.7500−0.0005 (3/4”)]
A
25±0.2 (0.984±0.008) 90 (3.54)
Watertight, Dust-Resistant Motors
(
0.0000 0.1875−0.0010
)
Parallel Key (Included)
No.12-24 UNC 12 (0.47) Deep
Right-Angle Gearheads
)
0
4.763−0.025
(
5 (0.20)
ϕ88 (ϕ3.46)
7.5 (0.30)
42±1 (1.65±0.04)
5.1 11.2
+0.040 4.763 0 +0.0016 0.1875 0.0000
L
2D CAD A1398A A1398B A1398C
+0.381 0 +0.015 0.106 0.000
2.692
(
A-A
)
Linear Heads
Brake Pack
±0.5
ϕ104 .02) 9±0 (ϕ4.0
Accessories
7.5 (0.30)
164 (6.46)
in. 1.77 2.28 2.76
0
5IK100VGVR-ESM
mm 45 58 70
0.0000 (0.1875−0.0010 )
5GVR□A
5∼15 18∼36 50∼180
4.763−0.025
Gear Ratio
Torque Motors
Mass kg lb.
90 (3.54)
5IK100VESM-□A
Gearhead Product Name
0.0000 (ϕ1.5354−0.0010 )
Motor Product Name
18±0.5 0 ϕ39−0.025 (0.71±0.02)
Product Name
L
20 (0.79)
80 (3) 32.5 (1.28)
4×ϕ8.5 (ϕ0.335) Thru
1000 (3.3 ft.) ✽Motor Cable ϕ8 (ϕ0.31)
27 (1.06)
14.5 (0.57)
5 max. (0.20 max.)
Installation
Protective Earth Terminal M4
Detail Drawing of Protective Earth Terminal
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-53
C-54 Three-Phase Induction Motors ●Round Shaft Type ◇Terminal Box Type
87.5 (3.44) 30 max. (1.18 max.) 0
Electromagnetic Brake Motors
Applicable Cable Size Outer Diameter ϕ8∼ϕ13 mm (ϕ0.31∼ϕ0.51 in.)
76.5 (3.01)
ϕ12−0.018
23 (0.91)
Induction Motors
A1324
40 (1.57)
76.5 (3.01)
Mass: 3.9 kg (8.6 lb.)
0.0000 (ϕ0.4724−0.0007 )
5IK100VA-ESMT2
.5
90 (3.54)
(
60 W (1/12 HP)
ϕ88 (ϕ3.46)
High-Efficiency K S Series
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
)
4±0 ϕ10 ±0.02) 09 (ϕ4.
7.5 (0.30) 164 (6.46)
100 W (1/8 HP)
4×ϕ6.5 (ϕ0.256) Thru 90 (3.54)
2 (0.08) 37±1 (1.46±0.04)
◇Cable Type 5IK100VA-ESM
Mass: 3.6 kg (7.9 lb.)
A1287
)
7.5 (0.30)
ϕ104±0 .02) 9±0 (ϕ4.0
20 (0.79)
.5
Protective Earth Terminal M4
60 W (1/12 HP)
90 W (1/8 HP)
32.5 (1.28)
4×ϕ6.5 (ϕ0.256) Thru
80 (3) 1000 (3.3 ft.)
27 (1.06)
14.5 (0.57)
40 W (1/19 HP)
5 max. (0.20 max.)
(
90 (3.54)
0 ϕ83−0.035 0.0000 ϕ3.2677−0.0014
ϕ88 (ϕ3.46)
25 W (1/30 HP)
90 (3.54)
(
15 W (1/150 HP)
0
7.5 (0.30)
37±1 (1.46±0.04) 2 (0.08)
ϕ12−0.018
164 (6.46)
6W (1/125 HP)
0.0000 ϕ0.4724−0.0007
)
Induction Motors
Detail Drawing of Protective Earth Terminal
✽Motor Cable ϕ8 (ϕ0.31)
✽Motor Cable Cores 3 Motor Leads, UL Style 3271, AWG20 2 Magnetic Brake Leads, UL Style 3266, AWG22
BH Series 200 W (1/4 HP) 2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
C-54
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-55
■Connection Diagrams ●Induction Motor - Right-Angle Geared Type Terminal Box Type
Type
Lead Wire Type Overview, Product Series
R0 C0 R0 C0
L1(R)
Connection Diagram
R0 C0
L2(S)
U V W
R0 C0
L1(R) Motor
L2(S)
Red R0 C0
White R0 C0
L3(T)
PE
Black
L3(T)
PE
Motor
Constant Speed Motors Three-Phase Induction Motors
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T. Single-Phase Induction Motors
Note When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. Recommended electromagnetic switch ➜ Page C-57
Reversible Motors
◇Rotation direction (as in the connection diagram above) The rotation direction of the output shaft is as follows, depending on the type and gear ratio. Gear Ratio: 7.5∼120
Type
Gear Ratio: 150∼240
[Electromagnetic Switch] Electromagnetic Thermal Contact Device Relay
Hollow Shaft Type
CCW
CW
L shaft
R shaft
R shaft
[Surge Protection] Connect the CR circuit for surge suppression ( ). R0=5∼200 Ω C0=0.1∼0.2 μF 200 WV ●We also offer the EPCR1201-2 (sold separately) as an accessory. ➜ Page C-208
L shaft
Electromagnetic Brake Motors
Clutch & Brake Motors Low-Speed Synchronous Motors
Torque Motors
Solid Shaft Type CCW
CW
Watertight, Dust-Resistant Motors
CCW
CW
●As viewed from the installation surface, the terminal box type is equipped with a terminal box on the top surface.
Right-Angle Gearheads
●Induction Motor - Parallel Shaft Combination Type/Round Shaft Type Type
Terminal Box Type
Lead Wire Type
R0 C0
L1(R)
Connection Diagram
R0 C0
R0 C0
L2(S)
Linear Heads
U V W
R0 C0
L1(R) Motor
L2(S)
L3(T)
Red White R0 C0
Motor
PE
Black
L3(T)
PE
Brake Pack
R0 C0
Accessories
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T. Note When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout.
Installation
Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above) The rotation direction of the output shaft is as follows, depending on the gear ratio. 60 W (1/12 HP)
Gear Ratio: 5∼18 120∼300 Round Shaft Type
60 W Gear Ratio: 25∼100 (1/12 HP)
100 W (1/8 HP)
Gear Ratio: 5∼15 75∼180 Round Shaft Type
100 W (1/8 HP)
Type
[Clockwise]
Gear Ratio: 18∼60
[Electromagnetic Switch] Electromagnetic Thermal Contact Device Relay
[Surge Protection] Connect the CR circuit for surge suppression ( ). R0=5∼200 Ω C0=0.1∼0.2 μF 200 WV ●We also offer the EPCR1201-2 (sold separately) as an accessory. ➜ Page C-208
[Counterclockwise]
Rotation Direction CW CCW
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-55
C-56 Three-Phase Induction Motors ●Electromagnetic Brake Type Motor - Right-Angle Geared Type Terminal Box Type
Type
Cable Type R0 C0
R0 C0
L1(R)
Induction Motors
Electromagnetic Brake Motors
R0 C0
R0 C0
White
L2(S)
L2(S)
Connection Diagram
Red
L1(R) U V W MB MB
R0 C0
L3(T) R0
C0
SW1
High-Efficiency K S Series
Motor
R0 C0
Black
L3(T)
Motor
PE
Orange R0
Electromagnetic Brake
C0
Orange
PE
Electromagnetic Brake
SW1
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T. 60 W (1/12 HP)
100 W (1/8 HP)
Note When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above) The rotation direction of the output shaft is as follows, depending on the gear ratio of the types.
Induction Motors
6W (1/125 HP)
Gear Ratio: 7.5∼120
Type
Gear Ratio: 150∼240
Hollow Shaft Type
25 W (1/30 HP)
L shaft
R shaft
60 W (1/12 HP)
R shaft
L shaft
[Contact Capacity of Switch SW1] 250 VAC 5 A min. (Inductive load) (Interlocking) CCW
CCW
CW
●As viewed from the installation surface, the terminal box type is equipped with a terminal box on the top surface.
●Electromagnetic Brake Type Motor - Parallel Shaft Combination Type/Round Shaft Type Type
Terminal Box Type
Cable Type R0 C0
R0 C0
90 W (1/8 HP) BH Series 200 W (1/4 HP)
●We also offer the EPCR1201-2 (sold separately) as an accessory. ➜ Page C-208
Solid Shaft Type CW
40 W (1/19 HP)
[Surge Protection] Connect the CR circuit for surge suppression ( ). R0=5∼200 Ω C0=0.1∼0.2 μF 200 WV
Electromagnetic Thermal Contact Device Relay
CCW
CW 15 W (1/150 HP)
[Electromagnetic Switch]
L1(R)
R0 C0
L2(S)
Connection Diagram
U V W MB MB
R0 C0
L3(T) R0
2-Pole, High-Speed 60-150 W (1/12-1/5 HP)
Red
L1(R)
C0
SW1
R0 C0
White
L2(S)
R0 C0
Motor
Black
L3(T)
Motor
PE
Orange
Electromagnetic Brake
R0
C0
Orange
PE
Electromagnetic Brake
SW1
To change the rotation to the opposite direction, switch any 2 connections between R, S and T. To change the rotation to the opposite direction, switch any 2 connections between R, S and T. Note When there is an overload or the output shaft is locked, always use the electromagnetic switch and the inverter's electronic thermal function to prevent motor burnout. Recommended electromagnetic switch ➜ Page C-57
◇Rotation direction (as in the connection diagram above) The rotation direction of the output shaft is as follows, depending on the gear ratio. 60 W (1/12 HP)
Gear Ratio: 5∼18 120∼300 Round Shaft Type
60 W Gear Ratio: 25∼100 (1/12 HP)
100 W (1/8 HP)
Gear Ratio: 5∼15 75∼180 Round Shaft Type
100 W (1/8 HP)
Type
[Clockwise]
Gear Ratio: 18∼60
[Electromagnetic Switch] Electromagnetic Thermal Contact Device Relay
[Surge Protection] Connect the CR circuit for surge suppression ( ). R0=5∼200 Ω C0=0.1∼0.2 μF 200 WV ●We also offer the EPCR1201-2 (sold separately) as an accessory. ➜ Page C-208
[Counterclockwise]
[Contact Capacity of Switch SW1] 250 VAC 5 A min. (Inductive load) (Interlocking)
Rotation Direction CW CCW
C-56
ORIENTAL MOTOR GENERAL CATALOG 2015/2016
Page
Features C-23 / System Configuration C-26 / Specifications C-30 Connection Diagrams C-55 / List of Combinations C-57
Standard AC Motors
C-57
■Recommended Electromagnetic Switch Always connect an electromagnetic switch when connecting the motor power supply. Set the rated current of the motor for the stabilized current of the thermal relay. ●Mitsubishi Electric Corporation Overview, For 60 W (1/12 HP) motor Part number: MSO-N10 0.35 A 200 V □ Product Series For 100 W (1/8 HP) motor Part number: MSO-N10 0.5 A 200 V □
●Fuji Electric FA Components & Systems Co., Ltd. For 60 W (1/12 HP) motor Part number: SC11AAN-□ 10TF For 100 W (1/8 HP) motor Part number: SC11AAN-□ 10TH ●The winding code is specified in the box □ in the part number.
Motor Output Power 60 W (1/12 HP)
100 W (1/8 HP)
Motor Rating Specifications Voltage Frequency Rated Current VAC Hz A 50 0.37 220 60 0.33 50 0.38 230 60 0.33 50 0.55 220 60 0.48 (0.52)✽ 50 0.57 230 60 0.48 (0.52)✽
●The winding name is specified in the box □ in the part number.
Winding Code
Motor Output Power
M
60 W (1/12 HP)
P M
100 W (1/8 HP)
P
✽( ) contains the value of the right-angle geared type.
Motor Rating Specifications Voltage Frequency Rated Current VAC Hz A 50 0.37 220 60 0.33 50 0.38 230 60 0.33 50 0.55 220 60 0.48 (0.52)✽ 50 0.57 230 60 0.48 (0.52)✽
Constant Speed Motors
Winding Name
Three-Phase Induction Motors
220 VAC 230 VAC 220 VAC
Single-Phase Induction Motors Reversible Motors
230 VAC
✽( ) contains the value of the right-angle geared type.
Electromagnetic Brake Motors
■Usage with Inverter
Clutch & Brake Motors
When using in combination with an inverter, the setting frequency conditions of the inverter are as follows. · Right-Angle Geared Type: 80 Hz max. · Parallel Shaft Combination Type/Round Shaft Type: 120 Hz max. Refer to the operating manual for motor settings and precautions.
Low-Speed Synchronous Motors
■Combination Type – List of Combinations
Torque Motors
The combination type comes with the motor and parallel shaft gearhead pre-assembled.
●Induction Motors Product Name 5IK60VEST2-□A 5IK100VEST2-□A 5IK60VES-□A 5IK100VES-□A
●Electromagnetic Brake Type Motors Motor Product Name 5IK60VGVH-EST2 5IK100VGVR-EST2 5IK60VGVH-ES 5IK100VGVR-ES
Gearhead Product Name 5GVH□A 5GVR□A 5GVH□A 5GVR□A
Product Name 5IK60VESMT2-□A 5IK100VESMT2-□A 5IK60VESM-□A 5IK100VESM-□A
Motor Product Name 5IK60VGVH-ESMT2 5IK100VGVR-ESMT2 5IK60VGVH-ESM 5IK100VGVR-ESM
Gearhead Product Name 5GVH□A 5GVR□A 5GVH□A 5GVR□A
Watertight, Dust-Resistant Motors Right-Angle Gearheads
Linear Heads
Brake Pack
Accessories
Installation
●A number indicating the gear ratio is entered where the box □ is located within the product name.
CAD Data Manuals
www.orientalmotor.com
Technical Support
TEL: (800) 468-3982 E-mail: [email protected]
C-57
