TL-400-0101-001B - OpenBeam 1515 Extrusion, Anodized - Thingiverse
A
B
C
D
E
F
G
H
UNLESS OTHERWISE SPECIFIED: 1.
CAD: USE TL-400-0101-01.DXF FOR TOOLING AND MANUFACTURE. THIS DRAWING WAS GENERATED FROM A CAD DATABASE. QUERY CAD FILE FOR BASIC DIMENSIONS. IF A CONFLICT EXISTS BETWEEN THIS DOCUMENT AND ANY REFERENCED DOCUMENT, THIS ONE TAKES PRECEDENCE.
2.
DIMENSIONING: ALL DIMENSIONS ARE IN MM. DIMENSIONING AND TOLERANCING ARE PER ASME Y14.5-1994.
3.
TOLERANCES: UNLESS OTHERWISE STATED, FEATURE SIZE AND POSITIONAL TOLERANCES ARE AS FOLLOWS:
2
3
4
5
4.
EXTRUSION LENGTH: EXTRUSIONS SHALL BE FURNISHED AT 1 METER ± 5 MM LENGTH.
5.
MATERIAL: ALUMINUM, 6063-T6, OR TAM LABS ENGINEERING APPROVED EQUIVALENT.
6.
VOLUMETRIC DATA (PROJECTED): CROSS 2 SECTION AREA: 118.8 MM . WEIGHT PER 1 METER SECTION: 321 GRAMS.
6
8.
7
9
K
L
N
O
P
REV
DESCRIPTION OF CHANGE
DATE
SHEET FORMAT CHANGE; CALLED OUT BLACK ANODIZE, RELEASE UNDER CC:BY-SA
2012.JUL.08
+0.10 5.80 - 0.05 4PL
10.
INSPECTION DIMENSIONS: DIMENSIONS IN OVALS ARE CONSIDERED TO BE CRITICAL TO FUNCTION (CTF) DIMENSIONS AND SHALL BE INSPECTED AT INCOMING INSPECTION.
11.
RoHS COMPLIANCE: THIS COMPONENT SHALL COMPLY WITH THE EU 2002/95/EC (RoHS) AND EU 2002/96/EC (WEEE) DIRECTIVES
3
3.20 4PL 1:1 SCALE FOR DXF GENERATION
R0.500 ALL UNDIMENSIONED RADII
4
+0.10 1.14 0 3PL
15
5
+0.05 2.70 - 0.15 +0.1 2.78 0 4 PL
R0.20 8PL
WORKSMANSHIP: TWIST SHALL NOT EXCEED 3/4° PER METER. EXTRUSION SHALL BE FLAT WITHIN 2MM PER METER. MAXIMUM ALLOWABLE DEPTH OF SURFACE DEFECT: 0.1MM. PART CLEANINESS: REMOVE ALL BURRS & SHARP CORNERS. CLEAN OFF ALL OILS, DIRT, OR OTHER CONTAMINANTS
1
2
SURFACE TREATMENT: CLEAR ANODIZE VERSION: ANODIZE PER MIL-A-8625 TYPE II, CLASS 1. BLACK ANODIZE VERSION: ANODIZE PER MIL-A-8625 TYPE I OR MIL-A8625 TYPE II B, CLASS 2. DYE SHALL BE BLACK. SEAL ANODIZED PARTS WITH NICKEL ACETATE, OR SODIUM OR POTASSIUM DICHROMATE SEAL AFTER ANODIZING.
9.
12.
M
B
X ± 0.50 MM X.X ± 0.10 MM X.XX ± 0.05 MM ANGLES ± 2° WALL THICKNESSES: +0.00 MM / - 0.30 MM
7.
8
J
REVISIONS
NOTES: 1
I
6
7
0 1.40 -0.10 8PL
50° 15
8
9
CONTROLLED DRAWING: NO CHANGES TO THIS DRAWING ALLOWED WITHOUT PRIOR APPROVAL FROM TAM LABS, LLC. TOLERANCES:
TITLE:
The information in this drawing is licensed under Creative Commons Attribution-Share Alike License. You may freely redistribute the content in this document and share it with others as long as the following criterias are met:
REFER TO NOTES FOR TOLERANCE INFORMATION.
EXTRUSION, OPENBEAM 1515 (CLEAR/BLACK ANODIZE)
1) The author of the document shall be credited (as OpenBeam USA) 2) Any derivatives from this work shall be shared under Creative Commons BY-SA license.
SIZE:
ENGINEER:
A3
DATE CREATED:
LICENSED UNDER CREATIVE COMMONS CC BY-SA
10
For more details, please visit Creative Commons at www.CreativeCommons.org/licenses/
A
B
C
D
E
F
G
H
CAD: SOLIDWORKS SCALE: 1:1
FILE NAME: TL-400-0101-01
DRAWN BY:
Terence T.S. Tam (譚德成) Terence T.S. Tam (譚德成)
PART NUMBER:
TL-400-0101-001CLR TL-400-0101-001BLK
REV
B
10
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P REVISIONS
SEE REVISION BLOCK ON PAGE 1
1
1
2
2
3
3
4
4
+0.05 5.80 - 0.20 4 PLACES
5
5
6
6
2.78 ±0.12
7
7
DETAIL A SCALE 12 : 1
8
8
9
9
4.81
TOLERANCES:
TITLE:
The information in this drawing is licensed under Creative Commons Attribution-Share Alike License. You may freely redistribute the content in this document and share it with others as long as the following criterias are met:
REFER TO NOTES FOR TOLERANCE INFORMATION.
EXTRUSION, OPENBEAM 1515, CLEAR/BLACK ANODIZE
1) The author of the document shall be credited (as OpenBeam USA) 2) Any derivatives from this work shall be shared under Creative Commons BY-SA license.
SIZE:
ENGINEER:
A3
DATE CREATED:
LICENSED UNDER CREATIVE COMMONS CC BY-SA
10
For more details, please visit Creative Commons at www.CreativeCommons.org/licenses/
A
B
C
D
E
F
G
H
CAD: SOLIDWORKS SCALE: 1:1
FILE NAME: TL-400-0101-01
DRAWN BY:
Terence T.S. Tam (譚德成) Terence T.S. Tam (譚德成)
PART NUMBER:
REV
TL-400-0101-001CLR TL-400-0101-001BLK
B
10
B
C
D
E
F
G
H
UNLESS OTHERWISE SPECIFIED: 1.
CAD: USE TL-400-0101-01.DXF FOR TOOLING AND MANUFACTURE. THIS DRAWING WAS GENERATED FROM A CAD DATABASE. QUERY CAD FILE FOR BASIC DIMENSIONS. IF A CONFLICT EXISTS BETWEEN THIS DOCUMENT AND ANY REFERENCED DOCUMENT, THIS ONE TAKES PRECEDENCE.
2.
DIMENSIONING: ALL DIMENSIONS ARE IN MM. DIMENSIONING AND TOLERANCING ARE PER ASME Y14.5-1994.
3.
TOLERANCES: UNLESS OTHERWISE STATED, FEATURE SIZE AND POSITIONAL TOLERANCES ARE AS FOLLOWS:
2
3
4
5
4.
EXTRUSION LENGTH: EXTRUSIONS SHALL BE FURNISHED AT 1 METER ± 5 MM LENGTH.
5.
MATERIAL: ALUMINUM, 6063-T6, OR TAM LABS ENGINEERING APPROVED EQUIVALENT.
6.
VOLUMETRIC DATA (PROJECTED): CROSS 2 SECTION AREA: 118.8 MM . WEIGHT PER 1 METER SECTION: 321 GRAMS.
6
8.
7
9
K
L
N
O
P
REV
DESCRIPTION OF CHANGE
DATE
SHEET FORMAT CHANGE; CALLED OUT BLACK ANODIZE, RELEASE UNDER CC:BY-SA
2012.JUL.08
+0.10 5.80 - 0.05 4PL
10.
INSPECTION DIMENSIONS: DIMENSIONS IN OVALS ARE CONSIDERED TO BE CRITICAL TO FUNCTION (CTF) DIMENSIONS AND SHALL BE INSPECTED AT INCOMING INSPECTION.
11.
RoHS COMPLIANCE: THIS COMPONENT SHALL COMPLY WITH THE EU 2002/95/EC (RoHS) AND EU 2002/96/EC (WEEE) DIRECTIVES
3
3.20 4PL 1:1 SCALE FOR DXF GENERATION
R0.500 ALL UNDIMENSIONED RADII
4
+0.10 1.14 0 3PL
15
5
+0.05 2.70 - 0.15 +0.1 2.78 0 4 PL
R0.20 8PL
WORKSMANSHIP: TWIST SHALL NOT EXCEED 3/4° PER METER. EXTRUSION SHALL BE FLAT WITHIN 2MM PER METER. MAXIMUM ALLOWABLE DEPTH OF SURFACE DEFECT: 0.1MM. PART CLEANINESS: REMOVE ALL BURRS & SHARP CORNERS. CLEAN OFF ALL OILS, DIRT, OR OTHER CONTAMINANTS
1
2
SURFACE TREATMENT: CLEAR ANODIZE VERSION: ANODIZE PER MIL-A-8625 TYPE II, CLASS 1. BLACK ANODIZE VERSION: ANODIZE PER MIL-A-8625 TYPE I OR MIL-A8625 TYPE II B, CLASS 2. DYE SHALL BE BLACK. SEAL ANODIZED PARTS WITH NICKEL ACETATE, OR SODIUM OR POTASSIUM DICHROMATE SEAL AFTER ANODIZING.
9.
12.
M
B
X ± 0.50 MM X.X ± 0.10 MM X.XX ± 0.05 MM ANGLES ± 2° WALL THICKNESSES: +0.00 MM / - 0.30 MM
7.
8
J
REVISIONS
NOTES: 1
I
6
7
0 1.40 -0.10 8PL
50° 15
8
9
CONTROLLED DRAWING: NO CHANGES TO THIS DRAWING ALLOWED WITHOUT PRIOR APPROVAL FROM TAM LABS, LLC. TOLERANCES:
TITLE:
The information in this drawing is licensed under Creative Commons Attribution-Share Alike License. You may freely redistribute the content in this document and share it with others as long as the following criterias are met:
REFER TO NOTES FOR TOLERANCE INFORMATION.
EXTRUSION, OPENBEAM 1515 (CLEAR/BLACK ANODIZE)
1) The author of the document shall be credited (as OpenBeam USA) 2) Any derivatives from this work shall be shared under Creative Commons BY-SA license.
SIZE:
ENGINEER:
A3
DATE CREATED:
LICENSED UNDER CREATIVE COMMONS CC BY-SA
10
For more details, please visit Creative Commons at www.CreativeCommons.org/licenses/
A
B
C
D
E
F
G
H
CAD: SOLIDWORKS SCALE: 1:1
FILE NAME: TL-400-0101-01
DRAWN BY:
Terence T.S. Tam (譚德成) Terence T.S. Tam (譚德成)
PART NUMBER:
TL-400-0101-001CLR TL-400-0101-001BLK
REV
B
10
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P REVISIONS
SEE REVISION BLOCK ON PAGE 1
1
1
2
2
3
3
4
4
+0.05 5.80 - 0.20 4 PLACES
5
5
6
6
2.78 ±0.12
7
7
DETAIL A SCALE 12 : 1
8
8
9
9
4.81
TOLERANCES:
TITLE:
The information in this drawing is licensed under Creative Commons Attribution-Share Alike License. You may freely redistribute the content in this document and share it with others as long as the following criterias are met:
REFER TO NOTES FOR TOLERANCE INFORMATION.
EXTRUSION, OPENBEAM 1515, CLEAR/BLACK ANODIZE
1) The author of the document shall be credited (as OpenBeam USA) 2) Any derivatives from this work shall be shared under Creative Commons BY-SA license.
SIZE:
ENGINEER:
A3
DATE CREATED:
LICENSED UNDER CREATIVE COMMONS CC BY-SA
10
For more details, please visit Creative Commons at www.CreativeCommons.org/licenses/
A
B
C
D
E
F
G
H
CAD: SOLIDWORKS SCALE: 1:1
FILE NAME: TL-400-0101-01
DRAWN BY:
Terence T.S. Tam (譚德成) Terence T.S. Tam (譚德成)
PART NUMBER:
REV
TL-400-0101-001CLR TL-400-0101-001BLK
B
10
