Uni Wide
Layher Rolling Towers Catalogue
The New Safety Structure
More Possibilities. With Layher Rolling Towers. More safety, when using Layher Rolling Towers To comply with European industrial safety laws, you as an employer must ensure that your workforce is only provided with equipment that, when used for its intended purpose, guarantees both safety and health protection. Appropriate safety measures have to be taken by you. Collective risk prevention takes precedence here over individual risk prevention. To comply in full with all requirements, Layher has now devised the new Safety Structure P2. The Layher Safety Structure P2 represents the collective safety measure.
The New Safety Structure P2 Platforms with an vertical spacing of 2 m. safe design with integrated collective side protection Thanks to the platforms assembled with a 2 meter spacing, the rear guardrails can already be fitted from the level below, so that when the next platform up is accessed there is already a simple side protection in place in all sides.
Can be retrofitted with the Layher modular system: If you already have a Layher rolling tower, you can upgrade it to the P2 design without any problem. The Safety Structure P2 can be used with Uni Standard, Uni Wide, Uni Light and Uni Compact towers.
Your Benefit The ingeniously simple assembly principle: All round side protection already in place when accessing the next platform up. More stability in the rolling tower thanks to additional stiffeners.
Platforms spaced 2 meters apart: Maximum safety during assembly, ascent and descent and during the actual work. Easy passing on of rolling tower parts or work materials from one level to the next.
The innovative Uni Assembly Hook: Considerably simplifies assembly and ensures fast and hitch-free assembly and dismantling.
2
The New Safety Structure
2
The Principle Easy. Fast. Safe.
1
Fit the first ladder frame.
Attach the Uni Assembly Hooks and position the second ladder frame for fitting of the rear guardrails.
3
Swing ladder frame with rear guardrail upwards and fit into place.
4
Insert diagonal braces and access deck.
Ascend to next level and install additional rear guardrails at 0.5 m.
P2-Components Uni Assembly Hook Ref. No. 1300.001 1.20 kg, 2 pieces
Uni Assembly Hook Diagonal brace 0.75 x 2,85 m Uni Standard / Uni Wide Ref. No. 1208.295 2.95 m; 3.75 kg
Diagonal brace 0.75 x 1.80 m Uni Light / Uni Compact Ref. No. 1208.195 1.95 m; 2.80 kg
Diagonal brace All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
3
Uni Standard The “most flexible rolling tower” for very great heights.
Max. working height: 13.60 m Area of working platform: 0.75 x 2.85 m Permissible live load: 2 kN/m² (scaffolding group 3)
Part List Tower model Rear guardrail 2.85 m Double guardrail 2.85 m Diagonal brace 3.35 m Diagonal brace 2.95 m Base ledger 2.85 m End toe board 0.75 m Toe board 2.85 m with claw Deck 2.85 m Access deck 2.85 m Spring clip 11 mm Castor 700 - 7 kN Ladder frame 75/4 - 1.00 m Ladder frame 75/8 - 2.00 m Mobile beam with bar Mobile beam with bar, adj. Uni Assembly Hook Ballast
Ref. No. 1205.285 1206.285 1208.285 1208.295 1211.285 1238.075 1239.285 1241.285 1242.285 1250.000 1259.200 1297.004 1297.008 1323.180 1323.320 1300.001 1249.000
1401101 1401102 1401103 1401104 1401105 1401106 1401107 1401108 1401109 1401110 1401111 0 4 9 8 13 12 17 16 21 20 25 2 0 0 0 0 0 0 0 0 0 0 0 2 2 4 4 6 6 8 8 10 10 0 0 2 0 2 0 2 0 2 0 2 0 1 1 1 1 1 1 1 1 1 1 0 2 2 2 2 2 2 2 2 2 2 0 2 2 2 2 2 2 2 2 2 2 0 1 0 1 0 1 0 1 0 1 0 1 1 2 2 3 3 4 4 5 5 6 0 8 8 12 12 16 16 20 20 24 24 4 4 4 4 4 4 4 4 4 4 4 0 2 0 2 0 2 0 2 0 2 0 2 2 4 4 6 6 8 8 10 10 12 0 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 0 1 1 1 1 1 1 1 1 1 1 For requirement see table below
Unit prices see main catalogue “Ladders & Rolling Towers”
Working height Scaffolding height
Platform height
Tower model Working height [m] Tower height1 [m] Platform height [m] Weight1 [kg]
1401101
1401102
1401103
1401104
3.5 2.6 1.5 85.60
4.5 3.75 2.5 182.80
5.5 4.75 3.5 217.70
6.5 5.75 4.5 244.60
l2 r2 X X X X
0 0 0 0 0
0 0 0 0 0
0 L0 R4 0 L0 R2 0
l2 r2 X X X X
0 L0 R2 0 L0 R4 l2 r2
l1 r1 L0 R6 0 L0 R8 l5 r5
l5 r5 L0 R10 0 L0 R2 l8 r8
Ballasting In closed areas: Assembly central* Assembly off-set Assembly off-set with wall bracing Assembly central with 1 console bracket* Assembly central with 2 console brackets* In the open: Assembly central* Assembly off-set Assembly off-set with wall bracing Assembly central with 1 console bracket* Assembly central with 2 console brackets*
1 without ballasting * Construction with adjustable mobile beam that must be fully extended. = not permissible / possible 0 = no ballast required Expressed in numbers of ballast weights of 10 kg each. For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These weights are attached quickly and securely at the right places using the star handle coupler. Do not use any liquid or granular ballast materials. The ballast weight be distributed evenly to all ballasting fixing points (see Instructions for Assembly and Use). Example: l2, r2 2 ballast weights of 10 kg each must be attached to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg to its right-hand side. L6, R16 6 ballast weights of 10 kg each must be attached to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg to its right-hand side.
4
Edition 05/2009
Uni Standard
Retrofitting Table Retrofitting the existing rolling tower to create the P2 design is possible using standard components of the Layher construction kit in the proven Layher quality. Retrofit set
Ref. No.
for tower model Rear guardrail 2.85 m Diagonal brace 2.95 m Deck 2.85 m Access deck 2.85 m Uni Assembly Hook
1205.285 1208.295 1241.285 1242.285 1300.001
1400001 1400002 1400003 1400004 1400005 1400006 1400007 1400008 1400009 1400010 1102* 1103* 1104* 1105* 1106* 1107* 1108* 1109* 1110* 1111* 0 4 3 2 3 4 5 4 5 6 0 2 0 2 0 2 0 2 0 2 1 0 1 0 1 0 1 0 1 0 0 1 1 1 1 2 2 2 2 3 1 1 1 1 1 1 1 1 1 1
* If there is already a base strut (1324.285) and/or double guardrails (1206.285) in your inventory, there’s no need to replace them. They can still be used.
1401105
1401106
1401107
1401108
1401109
1401110
1401111
7.5 6.75 5.5 279.50
8.5 7.75 6.5 306.40
9.6 8.74 7.6 392.50
10.6 9.79 8.6 419.40
11.6 10.79 9.6 454.30
12.6 11.79 10.6 481.20
13.6 12.79 11.6 516.10
0 L0 R4 0 L0 R4 0
0 L0 R6 0 L0 R6 0
0 L0 R4 0 0 0
0 L0 R6 0 0 0
0 L0 R6 0 0 0
0 L0 R8 0 0 0
0 L0 R10 0 0 0
l9 r9 L4 R16 L4 R0 L0 R16 X
l15 r15 L10 R22 L10 R0 L12 R12 X
l2 r2 L0 R18 0 X X
X X X X X
X X X X X
X X X X X
X X X X X
All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
5
Uni Wide The “universal tower” with double-width working surface.
Max. working height: 13.60 m Area of working platform: 1.50 x 2.85 m Permissible live load: 2 kN/m² (scaffolding group 3)
Part List Tower model Rear guardrail 2.85 m Double guardrail 2.85 m Diagonal brace 3.35 m Diagonal brace 2.95 m Base ledger 2.85 m End toe board 1.44 m Toe board 2.85 m with claw Deck 2.85 m Access deck 2.85 m Spring clip 11 mm Castor 700 - 7 kN Ladder frame 150/4 - 1.00 m Ladder frame 150/8 - 2.00 m Mobile beam with bar, adj. Access bar 0.9 m Uni Assembly Hook Ballast
Ref. No. 1205.285 1206.285 1208.285 1208.295 1211.285 1238.144 1239.285 1241.285 1242.285 1250.000 1259.200 1299.004 1299.008 1323.320 1344.003 1300.001 1249.000
1402101 1402102 1402103 1402104 1402105 1402106 1402107 1402108 1402109 1402110 1402111 0 6 10 10 14 12 17 16 21 20 25 2 0 0 0 0 0 0 0 0 0 0 0 2 2 4 4 6 6 8 8 10 10 0 0 2 0 2 0 2 0 2 0 2 0 0 0 0 0 1 1 1 1 1 1 0 2 2 2 2 2 2 2 2 2 2 0 2 2 2 2 2 2 2 2 2 2 1 2 2 3 3 4 4 5 5 6 6 1 1 2 2 3 3 4 4 5 5 6 0 4 4 8 8 16 16 20 20 24 24 4 4 4 4 4 4 4 4 4 4 4 0 2 0 2 0 2 0 2 0 2 0 2 2 4 4 6 6 8 8 10 10 12 0 0 0 0 0 2 2 2 2 2 2 0 2 1 2 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 For requirement see table below
Unit prices see main catalogue “Ladders & Rolling Towers”
Working height Scaffolding height
Platform height
Tower model Working height [m] Tower height1 [m] Platform height [m] Weight1 [kg]
1402101
1402102
1402103
1402104
3.5 2.6 1.5 115.40
4.5 3.6 2.5 187.20
5.5 4.6 3.5 240.40
6.5 5.6 4.5 278.80
0 X X X X
0 X X l0 r10 l3 r3
0 X X l0 r10 l2 r2
l1 r1 X X l0 r12 l5 r5
0 X X X X
l3 r3 X X l0 r18 l14 r14
l6 r6 X X l0 r22 l16 r16
l11 r11 X X l6 r28 X
Ballasting In closed areas: Assembly central* Assembly off-set Assembly off-set with wall bracing Assembly central with 1 console bracket* Assembly central with 2 console brackets* In the open: Assembly central* Assembly off-set Assembly off-set with wall bracing Assembly central with 1 console bracket* Assembly central with 2 console brackets*
1 without ballasting * Construction with adjustable mobile beam that must be fully extended. = not permissible / possible 0 = no ballast required Expressed in numbers of ballast weights of 10 kg each. For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These weights are attached quickly and securely at the right places using the star handle coupler. Do not use any liquid or granular ballast materials. The ballast weight be distributed evenly to all ballasting fixing points (see Instructions for Assembly and Use). Example: l2, r2 2 ballast weights of 10 kg each must be attached to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg to its right-hand side. L6, R16 6 ballast weights of 10 kg each must be attached to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg to its right-hand side.
6
Edition 05/2009
Uni Wide
Retrofitting Table Retrofitting the existing rolling tower to create the P2 design is possible using standard components of the Layher construction kit in the proven Layher quality. Retrofit set
Ref. No.
for tower model Rear guardrail 2.85 m Diagonal brace 2.95 m Deck 2.85 m Access deck 2.85 m Access bar 0.9 m Uni Assembly Hook
1205.285 1208.295 1241.285 1242.285 1344.003 1300.001
1400011 1400012 1400013 1400014 1400015 1400016 1400017 1400018 1400019 1400020 2102 2103 2104 2105 2106* 2107* 2108* 2109* 2110* 2111* 0 4 4 2 3 4 5 4 5 6 0 2 0 2 0 2 0 2 0 2 1 1 2 1 2 2 3 2 3 3 0 1 1 1 1 2 2 2 2 3 1 0 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1
* If there is already a base strut (1324.285) and/or double guardrails (1206.285) in your inventory, there’s no need to replace them. They can still be used.
1402105
1402106
1402107
1402108
1402109
1402110
1402111
7.5 6.6 5.5 332.00
8.6 7.79 6.6 454.20
9.6 8.79 7.6 514.30
10.6 9.79 8.6 545.80
11.6 10.79 9.6 605.90
12.6 11.79 10.6 637.40
13.6 12.79 11.6 697.50
l1 r1 X X l0 r12 l4 r4
0 0 0 0 0
0 0 0 0 0
0 0 0 0 X
0 0 0 0 X
0 0 0 0 X
0 0 0 X X
l16 r16 X X X X
0 L0 R8 0 X X
0 L0 R12 0 X X
X X X X X
X X X X X
X X X X X
X X X X X
All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
7
Uni Light The “practical one” for working in cramped conditions
Max. working height: 9.30 m Area of working platform: 0.75 x 1.80 m Permissible live load: 2 kN/m² (scaffolding group 3)
Part List Tower model Bolt M12 x 60 Rear guardrail 1.80 m Double guardrail 1.80 m Diagonal brace 2.50 m Diagonal brace 1.95 m Base ledger 1.80 m End toe board 0.75 m Toe board 1.80 m with claw Deck 1.80 m Access deck 1.80 m Spring clip 11 mm Ladder frame 75/4 - 1.00 m Ladder frame 75/8 - 2.00 m Castor 400 - 4kN Mobile beam with bar Uni Assembly Hook Ballast
Ref. No. 1203.060 1205.180 1206.180 1208.180 1208.195 1211.180 1238.075 1239.180 1241.180 1242.180 1250.000 1297.004 1297.008 1308.150 1323.180 1300.001 1249.000
1403201 4 0 2 0 0 0 0 0 0 1 0 0 2 4 0 0
1403202 4 4 0 2 0 1 2 2 1 1 8 2 2 4 2 1
1403203 1403204 1403205 4 4 4 9 8 13 0 0 0 2 4 4 2 0 2 1 1 1 2 2 2 2 2 2 0 1 0 2 2 3 8 12 12 0 2 0 4 4 6 4 4 4 2 2 2 1 1 1 For requirement see table below
1403206 4 12 0 6 0 1 2 2 1 3 16 2 6 4 2 1
1403207 4 17 0 6 2 1 2 2 0 4 16 0 8 4 2 1
Unit prices see main catalogue “Ladders & Rolling Towers”
Working height Scaffolding height
Platform height
Tower model Working height [m] Tower height1 [m] Platform height [m] Weight1 [kg]
1403201
1403202
3.15 2.34 1.15 52.60
4.30 3.49 2.30 133.40
l4 r4 X X
0 0 0
l4 r4 X X
0 0 0
Ballasting In closed areas: Assembly central* Assembly off-set Assembly off-set with wall bracing In the open: Assembly central* Assembly off-set Assembly off-set with wall bracing
1 without ballasting * Construction with adjustable mobile beam that must be fully extended. = not permissible / possible 0 = no ballast required Expressed in numbers of ballast weights of 10 kg each. For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These weights are attached quickly and securely at the right places using the star handle coupler. Do not use any liquid or granular ballast materials. The ballast weight be distributed evenly to all ballasting fixing points (see Instructions for Assembly and Use). Example: l2, r2 2 ballast weights of 10 kg each must be attached to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg to its right-hand side. L6, R16 6 ballast weights of 10 kg each must be attached to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg to its right-hand side.
8
Edition 05/2009
Uni Light
Retrofitting Table Retrofitting the existing rolling tower to create the P2 design is possible using standard components of the Layher construction kit in the proven Layher quality. Retrofit set
Ref. No.
for tower model Rear guardrail 1.80 m Diagonal brace 1.95 m Base ledger 1.80 m Deck 1.80 m Access deck 1.80 m Uni Assembly Hook
1205.180 1208.195 1211.180 1241.180 1242.180 1300.001
1400021 3202* 0 0 1 0 0 1
1400022 3203* 3 2 1 0 1 1
1400023 3204* 4 0 1 0 1 1
1400024 3205* 1 2 1 0 1 1
1400025 3206* 2 0 1 0 1 1
1400026 3207* 3 2 1 0 2 1
* If there there are already mobile beams 1.8 m (1214.180) and/or double guardrails (1206.180) in your inventory, there’s no need to replace them. They can still be used.
1403203
1403204
1403205
1403206
1403207
5.30 4.49 3.30 160.00
6.30 5.49 4.30 181.80
7.30 6.49 5.30 208.40
8.30 7.49 6.30 230.20
9.30 8.49 7.30 256.80
0 L0 R2 0
l2 r2 L0 R4 L2 R2
l3 r3 L0 R6 L4 R2
l5 r5 L2 R8 L6 R4
l6 r6 L2 R10 L6 R6
0 L0 R4 0
l3 r3 L0 R6 L4 R2
l5 r5 L0 R10 L6 R4
l9 r9 L4 R14 L10 R8
l13 r13 X X
All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
9
Uni Compact The “compact universal tower” with double-width working surface.
Max. working height: 10.60 m Area of working platform: 1.50 x 1.80 m Permissible live load: 2 kN/m² (scaffolding group 3)
Part List Tower model Rear guardrail 1.80 m Double guardrail 1.80 m Diagonal brace 2.50 m Diagonal brace 1.95 m Base ledger 1.80 m End toe board 1.44 m Toe board 1.80 m with claw Deck 1.80 m Access deck 180 m Spring clip 11 mm Castor 700 - 7 kN Ladder frame 150/4 - 1.00 m Ladder frame 150/8 - 2.00 m Mobile beam with bar, adj. Access bar 0.9 m Uni Assembly Hook Ballast
Ref. No. 1205.180 1206.180 1208.180 1208.195 1211.180 1238.144 1239.180 1241.180 1242.180 1250.000 1259.200 1299.004 1299.008 1323.320 1344.003 1300.001 1249.000
1405001 0 2 0 0 0 0 0 1 1 0 4 0 2 0 0 0
1405002 6 0 2 0 0 2 2 2 1 4 4 2 2 0 2 1
1405003 1405004 1405005 1405006 10 10 14 12 0 0 0 0 2 4 4 6 2 0 2 0 0 0 0 1 2 2 2 2 2 2 2 2 2 3 3 4 2 2 3 3 4 8 8 16 4 4 4 4 0 2 0 2 4 4 6 6 0 0 0 2 1 2 1 0 1 1 1 1 For requirement see table below
1405007 17 0 6 2 1 2 2 4 4 16 4 0 8 2 0 1
1405008 16 0 8 0 1 2 2 5 4 20 4 2 8 2 0 1
Unit prices see main catalogue “Ladders & Rolling Towers”
Working height Scaffolding height
Platform height
Tower model Working height [m] Tower height1 [m] Platform height [m] Weight1 [kg]
1405001
1405002
1405003
3.5 2.6 1.5 97.70
4.5 3.6 2.5 155.00
5.5 4.6 3.5 194.50
0 X 0
l1 r1 X l2 r0
l1 r1 X l2 r0
0 X 0
l1 r1 X l2 r0
l3 r3 X l4 r0
Ballasting In closed areas: Assembly central* Assembly off-set Assembly off-set with wall bracing In the open: Assembly central* Assembly off-set Assembly off-set with wall bracing
1 without ballasting * Construction with adjustable mobile beam that must be fully extended. = not permissible / possible 0 = no ballast required Expressed in numbers of ballast weights of 10 kg each. For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These weights are attached quickly and securely at the right places using the star handle coupler. Do not use any liquid or granular ballast materials. The ballast weight be distributed evenly to all ballasting fixing points (see Instructions for Assembly and Use). Example: l2, r2 2 ballast weights of 10 kg each must be attached to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg to its right-hand side. L6, R16 6 ballast weights of 10 kg each must be attached to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg to its right-hand side.
10
Edition 05/2009
Uni Compact
Retrofitting Table Retrofitting the existing rolling tower to create the P2 design is possible using standard components of the Layher construction kit in the proven Layher quality. Retrofit set
Ref. No.
for tower model Rear guardrail 1.80 m Diagonal brace 1.95 m Deck 1.80 m Access deck 1.80 m Access bar 0.9 m Uni Assembly Hook
1205.180 1208.195 1241.180 1242.180 1344.003 1300.001
1400027 5002 0 0 1 0 1 1
1400028 5003 4 2 1 1 0 1
1400029 5004 4 0 2 1 1 1
1400030 5005 2 2 1 1 0 1
1400031 5006* 3 0 2 1 0 1
1400032 5007* 4 2 2 2 0 1
1400033 5008* 5 0 3 2 0 1
* If there is already a base strut (1324.180) and/or double guardrails (1206.180) in your inventory, there’s no need to replace them. They can still be used.
1405004
1405005
1405006
1405007
1405008
6.5 5.6 4.5 226.50
7.5 6.6 5.5 266.00
8.6 7.79 6.6 379.90
9.6 8.79 7.6 425.00
10.6 9.79 8.6 451.40
l4 r4 X l4 r0
0 0 0
0 0 0
0 0 0
l1 r1 l1 r1 l1 r1
l7 r7 X l10 r4
l6 r6 l6 r6 l6 r6
l13 r13 l13 r13 l13 r13
l17 r17 l17 r17 l17 r17
X X X
All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
11
Layher – Your dependable partner – with more than 60 years of experience. “Made by Layher” means “Made in Germany”. The Layher product range: Top quality – all from the same people.
SpeedyScaf
Allround Scaffolding
Event Systems
Protective Systems
Rolling Towers
Ladders
Wilhelm Layher GmbH & Co. KG Post Box 40 Scaffoldings Grandstands Ladders D-74361 Gueglingen-Eibensbach Ochsenbacher Strasse 56 D-74363 Gueglingen-Eibensbach Germany
Telephone: +49 71 35 / 70 - 0 Fax: +49 71 35 / 70 - 265 E-Mail: [email protected] www.layher.com
Ref. No. 8107.251
Edition 15/05/2009
The New Safety Structure
More Possibilities. With Layher Rolling Towers. More safety, when using Layher Rolling Towers To comply with European industrial safety laws, you as an employer must ensure that your workforce is only provided with equipment that, when used for its intended purpose, guarantees both safety and health protection. Appropriate safety measures have to be taken by you. Collective risk prevention takes precedence here over individual risk prevention. To comply in full with all requirements, Layher has now devised the new Safety Structure P2. The Layher Safety Structure P2 represents the collective safety measure.
The New Safety Structure P2 Platforms with an vertical spacing of 2 m. safe design with integrated collective side protection Thanks to the platforms assembled with a 2 meter spacing, the rear guardrails can already be fitted from the level below, so that when the next platform up is accessed there is already a simple side protection in place in all sides.
Can be retrofitted with the Layher modular system: If you already have a Layher rolling tower, you can upgrade it to the P2 design without any problem. The Safety Structure P2 can be used with Uni Standard, Uni Wide, Uni Light and Uni Compact towers.
Your Benefit The ingeniously simple assembly principle: All round side protection already in place when accessing the next platform up. More stability in the rolling tower thanks to additional stiffeners.
Platforms spaced 2 meters apart: Maximum safety during assembly, ascent and descent and during the actual work. Easy passing on of rolling tower parts or work materials from one level to the next.
The innovative Uni Assembly Hook: Considerably simplifies assembly and ensures fast and hitch-free assembly and dismantling.
2
The New Safety Structure
2
The Principle Easy. Fast. Safe.
1
Fit the first ladder frame.
Attach the Uni Assembly Hooks and position the second ladder frame for fitting of the rear guardrails.
3
Swing ladder frame with rear guardrail upwards and fit into place.
4
Insert diagonal braces and access deck.
Ascend to next level and install additional rear guardrails at 0.5 m.
P2-Components Uni Assembly Hook Ref. No. 1300.001 1.20 kg, 2 pieces
Uni Assembly Hook Diagonal brace 0.75 x 2,85 m Uni Standard / Uni Wide Ref. No. 1208.295 2.95 m; 3.75 kg
Diagonal brace 0.75 x 1.80 m Uni Light / Uni Compact Ref. No. 1208.195 1.95 m; 2.80 kg
Diagonal brace All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
3
Uni Standard The “most flexible rolling tower” for very great heights.
Max. working height: 13.60 m Area of working platform: 0.75 x 2.85 m Permissible live load: 2 kN/m² (scaffolding group 3)
Part List Tower model Rear guardrail 2.85 m Double guardrail 2.85 m Diagonal brace 3.35 m Diagonal brace 2.95 m Base ledger 2.85 m End toe board 0.75 m Toe board 2.85 m with claw Deck 2.85 m Access deck 2.85 m Spring clip 11 mm Castor 700 - 7 kN Ladder frame 75/4 - 1.00 m Ladder frame 75/8 - 2.00 m Mobile beam with bar Mobile beam with bar, adj. Uni Assembly Hook Ballast
Ref. No. 1205.285 1206.285 1208.285 1208.295 1211.285 1238.075 1239.285 1241.285 1242.285 1250.000 1259.200 1297.004 1297.008 1323.180 1323.320 1300.001 1249.000
1401101 1401102 1401103 1401104 1401105 1401106 1401107 1401108 1401109 1401110 1401111 0 4 9 8 13 12 17 16 21 20 25 2 0 0 0 0 0 0 0 0 0 0 0 2 2 4 4 6 6 8 8 10 10 0 0 2 0 2 0 2 0 2 0 2 0 1 1 1 1 1 1 1 1 1 1 0 2 2 2 2 2 2 2 2 2 2 0 2 2 2 2 2 2 2 2 2 2 0 1 0 1 0 1 0 1 0 1 0 1 1 2 2 3 3 4 4 5 5 6 0 8 8 12 12 16 16 20 20 24 24 4 4 4 4 4 4 4 4 4 4 4 0 2 0 2 0 2 0 2 0 2 0 2 2 4 4 6 6 8 8 10 10 12 0 2 2 2 2 2 0 0 0 0 0 0 0 0 0 0 0 2 2 2 2 2 0 1 1 1 1 1 1 1 1 1 1 For requirement see table below
Unit prices see main catalogue “Ladders & Rolling Towers”
Working height Scaffolding height
Platform height
Tower model Working height [m] Tower height1 [m] Platform height [m] Weight1 [kg]
1401101
1401102
1401103
1401104
3.5 2.6 1.5 85.60
4.5 3.75 2.5 182.80
5.5 4.75 3.5 217.70
6.5 5.75 4.5 244.60
l2 r2 X X X X
0 0 0 0 0
0 0 0 0 0
0 L0 R4 0 L0 R2 0
l2 r2 X X X X
0 L0 R2 0 L0 R4 l2 r2
l1 r1 L0 R6 0 L0 R8 l5 r5
l5 r5 L0 R10 0 L0 R2 l8 r8
Ballasting In closed areas: Assembly central* Assembly off-set Assembly off-set with wall bracing Assembly central with 1 console bracket* Assembly central with 2 console brackets* In the open: Assembly central* Assembly off-set Assembly off-set with wall bracing Assembly central with 1 console bracket* Assembly central with 2 console brackets*
1 without ballasting * Construction with adjustable mobile beam that must be fully extended. = not permissible / possible 0 = no ballast required Expressed in numbers of ballast weights of 10 kg each. For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These weights are attached quickly and securely at the right places using the star handle coupler. Do not use any liquid or granular ballast materials. The ballast weight be distributed evenly to all ballasting fixing points (see Instructions for Assembly and Use). Example: l2, r2 2 ballast weights of 10 kg each must be attached to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg to its right-hand side. L6, R16 6 ballast weights of 10 kg each must be attached to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg to its right-hand side.
4
Edition 05/2009
Uni Standard
Retrofitting Table Retrofitting the existing rolling tower to create the P2 design is possible using standard components of the Layher construction kit in the proven Layher quality. Retrofit set
Ref. No.
for tower model Rear guardrail 2.85 m Diagonal brace 2.95 m Deck 2.85 m Access deck 2.85 m Uni Assembly Hook
1205.285 1208.295 1241.285 1242.285 1300.001
1400001 1400002 1400003 1400004 1400005 1400006 1400007 1400008 1400009 1400010 1102* 1103* 1104* 1105* 1106* 1107* 1108* 1109* 1110* 1111* 0 4 3 2 3 4 5 4 5 6 0 2 0 2 0 2 0 2 0 2 1 0 1 0 1 0 1 0 1 0 0 1 1 1 1 2 2 2 2 3 1 1 1 1 1 1 1 1 1 1
* If there is already a base strut (1324.285) and/or double guardrails (1206.285) in your inventory, there’s no need to replace them. They can still be used.
1401105
1401106
1401107
1401108
1401109
1401110
1401111
7.5 6.75 5.5 279.50
8.5 7.75 6.5 306.40
9.6 8.74 7.6 392.50
10.6 9.79 8.6 419.40
11.6 10.79 9.6 454.30
12.6 11.79 10.6 481.20
13.6 12.79 11.6 516.10
0 L0 R4 0 L0 R4 0
0 L0 R6 0 L0 R6 0
0 L0 R4 0 0 0
0 L0 R6 0 0 0
0 L0 R6 0 0 0
0 L0 R8 0 0 0
0 L0 R10 0 0 0
l9 r9 L4 R16 L4 R0 L0 R16 X
l15 r15 L10 R22 L10 R0 L12 R12 X
l2 r2 L0 R18 0 X X
X X X X X
X X X X X
X X X X X
X X X X X
All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
5
Uni Wide The “universal tower” with double-width working surface.
Max. working height: 13.60 m Area of working platform: 1.50 x 2.85 m Permissible live load: 2 kN/m² (scaffolding group 3)
Part List Tower model Rear guardrail 2.85 m Double guardrail 2.85 m Diagonal brace 3.35 m Diagonal brace 2.95 m Base ledger 2.85 m End toe board 1.44 m Toe board 2.85 m with claw Deck 2.85 m Access deck 2.85 m Spring clip 11 mm Castor 700 - 7 kN Ladder frame 150/4 - 1.00 m Ladder frame 150/8 - 2.00 m Mobile beam with bar, adj. Access bar 0.9 m Uni Assembly Hook Ballast
Ref. No. 1205.285 1206.285 1208.285 1208.295 1211.285 1238.144 1239.285 1241.285 1242.285 1250.000 1259.200 1299.004 1299.008 1323.320 1344.003 1300.001 1249.000
1402101 1402102 1402103 1402104 1402105 1402106 1402107 1402108 1402109 1402110 1402111 0 6 10 10 14 12 17 16 21 20 25 2 0 0 0 0 0 0 0 0 0 0 0 2 2 4 4 6 6 8 8 10 10 0 0 2 0 2 0 2 0 2 0 2 0 0 0 0 0 1 1 1 1 1 1 0 2 2 2 2 2 2 2 2 2 2 0 2 2 2 2 2 2 2 2 2 2 1 2 2 3 3 4 4 5 5 6 6 1 1 2 2 3 3 4 4 5 5 6 0 4 4 8 8 16 16 20 20 24 24 4 4 4 4 4 4 4 4 4 4 4 0 2 0 2 0 2 0 2 0 2 0 2 2 4 4 6 6 8 8 10 10 12 0 0 0 0 0 2 2 2 2 2 2 0 2 1 2 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 For requirement see table below
Unit prices see main catalogue “Ladders & Rolling Towers”
Working height Scaffolding height
Platform height
Tower model Working height [m] Tower height1 [m] Platform height [m] Weight1 [kg]
1402101
1402102
1402103
1402104
3.5 2.6 1.5 115.40
4.5 3.6 2.5 187.20
5.5 4.6 3.5 240.40
6.5 5.6 4.5 278.80
0 X X X X
0 X X l0 r10 l3 r3
0 X X l0 r10 l2 r2
l1 r1 X X l0 r12 l5 r5
0 X X X X
l3 r3 X X l0 r18 l14 r14
l6 r6 X X l0 r22 l16 r16
l11 r11 X X l6 r28 X
Ballasting In closed areas: Assembly central* Assembly off-set Assembly off-set with wall bracing Assembly central with 1 console bracket* Assembly central with 2 console brackets* In the open: Assembly central* Assembly off-set Assembly off-set with wall bracing Assembly central with 1 console bracket* Assembly central with 2 console brackets*
1 without ballasting * Construction with adjustable mobile beam that must be fully extended. = not permissible / possible 0 = no ballast required Expressed in numbers of ballast weights of 10 kg each. For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These weights are attached quickly and securely at the right places using the star handle coupler. Do not use any liquid or granular ballast materials. The ballast weight be distributed evenly to all ballasting fixing points (see Instructions for Assembly and Use). Example: l2, r2 2 ballast weights of 10 kg each must be attached to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg to its right-hand side. L6, R16 6 ballast weights of 10 kg each must be attached to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg to its right-hand side.
6
Edition 05/2009
Uni Wide
Retrofitting Table Retrofitting the existing rolling tower to create the P2 design is possible using standard components of the Layher construction kit in the proven Layher quality. Retrofit set
Ref. No.
for tower model Rear guardrail 2.85 m Diagonal brace 2.95 m Deck 2.85 m Access deck 2.85 m Access bar 0.9 m Uni Assembly Hook
1205.285 1208.295 1241.285 1242.285 1344.003 1300.001
1400011 1400012 1400013 1400014 1400015 1400016 1400017 1400018 1400019 1400020 2102 2103 2104 2105 2106* 2107* 2108* 2109* 2110* 2111* 0 4 4 2 3 4 5 4 5 6 0 2 0 2 0 2 0 2 0 2 1 1 2 1 2 2 3 2 3 3 0 1 1 1 1 2 2 2 2 3 1 0 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1
* If there is already a base strut (1324.285) and/or double guardrails (1206.285) in your inventory, there’s no need to replace them. They can still be used.
1402105
1402106
1402107
1402108
1402109
1402110
1402111
7.5 6.6 5.5 332.00
8.6 7.79 6.6 454.20
9.6 8.79 7.6 514.30
10.6 9.79 8.6 545.80
11.6 10.79 9.6 605.90
12.6 11.79 10.6 637.40
13.6 12.79 11.6 697.50
l1 r1 X X l0 r12 l4 r4
0 0 0 0 0
0 0 0 0 0
0 0 0 0 X
0 0 0 0 X
0 0 0 0 X
0 0 0 X X
l16 r16 X X X X
0 L0 R8 0 X X
0 L0 R12 0 X X
X X X X X
X X X X X
X X X X X
X X X X X
All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
7
Uni Light The “practical one” for working in cramped conditions
Max. working height: 9.30 m Area of working platform: 0.75 x 1.80 m Permissible live load: 2 kN/m² (scaffolding group 3)
Part List Tower model Bolt M12 x 60 Rear guardrail 1.80 m Double guardrail 1.80 m Diagonal brace 2.50 m Diagonal brace 1.95 m Base ledger 1.80 m End toe board 0.75 m Toe board 1.80 m with claw Deck 1.80 m Access deck 1.80 m Spring clip 11 mm Ladder frame 75/4 - 1.00 m Ladder frame 75/8 - 2.00 m Castor 400 - 4kN Mobile beam with bar Uni Assembly Hook Ballast
Ref. No. 1203.060 1205.180 1206.180 1208.180 1208.195 1211.180 1238.075 1239.180 1241.180 1242.180 1250.000 1297.004 1297.008 1308.150 1323.180 1300.001 1249.000
1403201 4 0 2 0 0 0 0 0 0 1 0 0 2 4 0 0
1403202 4 4 0 2 0 1 2 2 1 1 8 2 2 4 2 1
1403203 1403204 1403205 4 4 4 9 8 13 0 0 0 2 4 4 2 0 2 1 1 1 2 2 2 2 2 2 0 1 0 2 2 3 8 12 12 0 2 0 4 4 6 4 4 4 2 2 2 1 1 1 For requirement see table below
1403206 4 12 0 6 0 1 2 2 1 3 16 2 6 4 2 1
1403207 4 17 0 6 2 1 2 2 0 4 16 0 8 4 2 1
Unit prices see main catalogue “Ladders & Rolling Towers”
Working height Scaffolding height
Platform height
Tower model Working height [m] Tower height1 [m] Platform height [m] Weight1 [kg]
1403201
1403202
3.15 2.34 1.15 52.60
4.30 3.49 2.30 133.40
l4 r4 X X
0 0 0
l4 r4 X X
0 0 0
Ballasting In closed areas: Assembly central* Assembly off-set Assembly off-set with wall bracing In the open: Assembly central* Assembly off-set Assembly off-set with wall bracing
1 without ballasting * Construction with adjustable mobile beam that must be fully extended. = not permissible / possible 0 = no ballast required Expressed in numbers of ballast weights of 10 kg each. For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These weights are attached quickly and securely at the right places using the star handle coupler. Do not use any liquid or granular ballast materials. The ballast weight be distributed evenly to all ballasting fixing points (see Instructions for Assembly and Use). Example: l2, r2 2 ballast weights of 10 kg each must be attached to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg to its right-hand side. L6, R16 6 ballast weights of 10 kg each must be attached to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg to its right-hand side.
8
Edition 05/2009
Uni Light
Retrofitting Table Retrofitting the existing rolling tower to create the P2 design is possible using standard components of the Layher construction kit in the proven Layher quality. Retrofit set
Ref. No.
for tower model Rear guardrail 1.80 m Diagonal brace 1.95 m Base ledger 1.80 m Deck 1.80 m Access deck 1.80 m Uni Assembly Hook
1205.180 1208.195 1211.180 1241.180 1242.180 1300.001
1400021 3202* 0 0 1 0 0 1
1400022 3203* 3 2 1 0 1 1
1400023 3204* 4 0 1 0 1 1
1400024 3205* 1 2 1 0 1 1
1400025 3206* 2 0 1 0 1 1
1400026 3207* 3 2 1 0 2 1
* If there there are already mobile beams 1.8 m (1214.180) and/or double guardrails (1206.180) in your inventory, there’s no need to replace them. They can still be used.
1403203
1403204
1403205
1403206
1403207
5.30 4.49 3.30 160.00
6.30 5.49 4.30 181.80
7.30 6.49 5.30 208.40
8.30 7.49 6.30 230.20
9.30 8.49 7.30 256.80
0 L0 R2 0
l2 r2 L0 R4 L2 R2
l3 r3 L0 R6 L4 R2
l5 r5 L2 R8 L6 R4
l6 r6 L2 R10 L6 R6
0 L0 R4 0
l3 r3 L0 R6 L4 R2
l5 r5 L0 R10 L6 R4
l9 r9 L4 R14 L10 R8
l13 r13 X X
All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
9
Uni Compact The “compact universal tower” with double-width working surface.
Max. working height: 10.60 m Area of working platform: 1.50 x 1.80 m Permissible live load: 2 kN/m² (scaffolding group 3)
Part List Tower model Rear guardrail 1.80 m Double guardrail 1.80 m Diagonal brace 2.50 m Diagonal brace 1.95 m Base ledger 1.80 m End toe board 1.44 m Toe board 1.80 m with claw Deck 1.80 m Access deck 180 m Spring clip 11 mm Castor 700 - 7 kN Ladder frame 150/4 - 1.00 m Ladder frame 150/8 - 2.00 m Mobile beam with bar, adj. Access bar 0.9 m Uni Assembly Hook Ballast
Ref. No. 1205.180 1206.180 1208.180 1208.195 1211.180 1238.144 1239.180 1241.180 1242.180 1250.000 1259.200 1299.004 1299.008 1323.320 1344.003 1300.001 1249.000
1405001 0 2 0 0 0 0 0 1 1 0 4 0 2 0 0 0
1405002 6 0 2 0 0 2 2 2 1 4 4 2 2 0 2 1
1405003 1405004 1405005 1405006 10 10 14 12 0 0 0 0 2 4 4 6 2 0 2 0 0 0 0 1 2 2 2 2 2 2 2 2 2 3 3 4 2 2 3 3 4 8 8 16 4 4 4 4 0 2 0 2 4 4 6 6 0 0 0 2 1 2 1 0 1 1 1 1 For requirement see table below
1405007 17 0 6 2 1 2 2 4 4 16 4 0 8 2 0 1
1405008 16 0 8 0 1 2 2 5 4 20 4 2 8 2 0 1
Unit prices see main catalogue “Ladders & Rolling Towers”
Working height Scaffolding height
Platform height
Tower model Working height [m] Tower height1 [m] Platform height [m] Weight1 [kg]
1405001
1405002
1405003
3.5 2.6 1.5 97.70
4.5 3.6 2.5 155.00
5.5 4.6 3.5 194.50
0 X 0
l1 r1 X l2 r0
l1 r1 X l2 r0
0 X 0
l1 r1 X l2 r0
l3 r3 X l4 r0
Ballasting In closed areas: Assembly central* Assembly off-set Assembly off-set with wall bracing In the open: Assembly central* Assembly off-set Assembly off-set with wall bracing
1 without ballasting * Construction with adjustable mobile beam that must be fully extended. = not permissible / possible 0 = no ballast required Expressed in numbers of ballast weights of 10 kg each. For ballasting, use Layher ballast weights, Ref. No. 1249.000, 10 kg each. These weights are attached quickly and securely at the right places using the star handle coupler. Do not use any liquid or granular ballast materials. The ballast weight be distributed evenly to all ballasting fixing points (see Instructions for Assembly and Use). Example: l2, r2 2 ballast weights of 10 kg each must be attached to the left-hand side of the ladder frame, and 2 ballast weights of 10 kg to its right-hand side. L6, R16 6 ballast weights of 10 kg each must be attached to the left-hand side of the mobile beam, and 16 ballast weights of 10 kg to its right-hand side.
10
Edition 05/2009
Uni Compact
Retrofitting Table Retrofitting the existing rolling tower to create the P2 design is possible using standard components of the Layher construction kit in the proven Layher quality. Retrofit set
Ref. No.
for tower model Rear guardrail 1.80 m Diagonal brace 1.95 m Deck 1.80 m Access deck 1.80 m Access bar 0.9 m Uni Assembly Hook
1205.180 1208.195 1241.180 1242.180 1344.003 1300.001
1400027 5002 0 0 1 0 1 1
1400028 5003 4 2 1 1 0 1
1400029 5004 4 0 2 1 1 1
1400030 5005 2 2 1 1 0 1
1400031 5006* 3 0 2 1 0 1
1400032 5007* 4 2 2 2 0 1
1400033 5008* 5 0 3 2 0 1
* If there is already a base strut (1324.180) and/or double guardrails (1206.180) in your inventory, there’s no need to replace them. They can still be used.
1405004
1405005
1405006
1405007
1405008
6.5 5.6 4.5 226.50
7.5 6.6 5.5 266.00
8.6 7.79 6.6 379.90
9.6 8.79 7.6 425.00
10.6 9.79 8.6 451.40
l4 r4 X l4 r0
0 0 0
0 0 0
0 0 0
l1 r1 l1 r1 l1 r1
l7 r7 X l10 r4
l6 r6 l6 r6 l6 r6
l13 r13 l13 r13 l13 r13
l17 r17 l17 r17 l17 r17
X X X
All dimensions and weights are guideline values. Subject to technical modification. Our deliveries shall be made exclusively in accordance with our currently valid General Terms of Sale. Title to the delivered goods shall be retained until full payment has been made. When purchasing, you receive instructions for assembly and use that must be followed without fail for assembly, dismantling and use.
Edition 05/2009
11
Layher – Your dependable partner – with more than 60 years of experience. “Made by Layher” means “Made in Germany”. The Layher product range: Top quality – all from the same people.
SpeedyScaf
Allround Scaffolding
Event Systems
Protective Systems
Rolling Towers
Ladders
Wilhelm Layher GmbH & Co. KG Post Box 40 Scaffoldings Grandstands Ladders D-74361 Gueglingen-Eibensbach Ochsenbacher Strasse 56 D-74363 Gueglingen-Eibensbach Germany
Telephone: +49 71 35 / 70 - 0 Fax: +49 71 35 / 70 - 265 E-Mail: [email protected] www.layher.com
Ref. No. 8107.251
Edition 15/05/2009
