Uniden EXP 371 Charging Contact Points Replacement
Uniden EXP 371 Charging Contact Points Replacement
Uniden EXP 371 Charging Contact Points Replacement This repair guide is for the replacement of the charging contact points on your handheld phone.
Written By: Eric Rodrigues
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Uniden EXP 371 Charging Contact Points Replacement
INTRODUCTION This replacement guide will teach you how to replace the charging contact points of your phone.
TOOLS:
PARTS:
Phillips #1 Screwdriver (1)
New pair of contact points. (1)
iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Uniden EXP 371 Charging Contact Points Replacement
Step 1 — Charging Contact Points
Your first step will be to remove the battery cover and the battery.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
The next step will be to remove the two screws from the rear of the phone case.
Page 3 of 5
Uniden EXP 371 Charging Contact Points Replacement
Step 3
© iFixit — CC BY-NC-SA
www.iFixit.com
After that you will need to pry the back of the case off of the front part of the case.
Page 4 of 5
Uniden EXP 371 Charging Contact Points Replacement
Step 4
After removing the rear cover there will be two more screws to remove that hold each of the charging contact points. Once those are removed you can replace them with the new ones.
When replacing the charging contacts, they only go on one way, but it is useful to note how the original ones were on.
Reverse these steps in order to reassemble your phone.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 10:51:57 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Uniden EXP 371 Charging Contact Points Replacement This repair guide is for the replacement of the charging contact points on your handheld phone.
Written By: Eric Rodrigues
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Uniden EXP 371 Charging Contact Points Replacement
INTRODUCTION This replacement guide will teach you how to replace the charging contact points of your phone.
TOOLS:
PARTS:
Phillips #1 Screwdriver (1)
New pair of contact points. (1)
iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Uniden EXP 371 Charging Contact Points Replacement
Step 1 — Charging Contact Points
Your first step will be to remove the battery cover and the battery.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
The next step will be to remove the two screws from the rear of the phone case.
Page 3 of 5
Uniden EXP 371 Charging Contact Points Replacement
Step 3
© iFixit — CC BY-NC-SA
www.iFixit.com
After that you will need to pry the back of the case off of the front part of the case.
Page 4 of 5
Uniden EXP 371 Charging Contact Points Replacement
Step 4
After removing the rear cover there will be two more screws to remove that hold each of the charging contact points. Once those are removed you can replace them with the new ones.
When replacing the charging contacts, they only go on one way, but it is useful to note how the original ones were on.
Reverse these steps in order to reassemble your phone.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-22 10:51:57 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
