Untitled - Georg Schlegel GmbH & Co. KG
468
General Data Type Reference: Description: Approvals: Protection class: Operation travel: Connection type: Contact material: Max. storage temperature: Max. operating temperature:
Mechanical life: Electrical life (rated load): Contact resistance NO: Contact resistance NC: Bouncing time NO: Bouncing time NC:
CTP... Electronic Contact block, PCB-mount terminals, with snap action CCC, cCSAus, NV, CE II (protective insulation) 3 mm PCB-mount terminals gold-plated 1.5μm -50°C ... 85°C -30°C ... 70°C, without illumination -30°C ... 55°C, using incandescent lamps -30°C ... 65°C, using LEDs 1 m switching cycles 1m operations at rated load < 50 mOhm (new state) < 100 mOhm (new state) < 10ms < 10ms
Technical Data - Lamp Lamp socket: Max. lamp voltage: Max. lamp output: Definition:
T5,5K 60V 1.2W X1...anode, X2...cathode
Electrical Features Rated voltage: Rated current:
20mV ... 48V AC/DC 0.01mA ... 100mA
Electrical data acc. to IEC/EN 60947-5-1 (VDE 0660 Sect. 200) Utilisation category: Rated insulation voltage Ui: Rated operating voltage Ue: Rated operating current Ie: Continuous thermal current:
alternate current AC12 60V 48V 0.1A 100mA
direct current DC12 60V 48V 0.1A 100mA
Remark GB14048.5-2008 (IEC60947-5-1)
Elektrische Daten nach C22.2 No. 14-10 Rated voltage: Rated current:
20mV ... 48V AC/DC 0.01mA ... 100mA
469
Mounting Instructions
About Us
1.
Control Units
Æ Contact Blocks
2.
Panel Mount Jacks
3.
Bus Technology Enclosures Terminal Blocks Pedal Switches Limit Switches Type Index 470
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - § +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz
Contact Blocks
made in germany
Type
Contact Unit, momentary 1 inverter PCB-mount terminals 2 holes allow direct soldering of an LED into the PCB suitable actuators gold-plated 1.5μm
CTP_485
Illuminated Contact Unit, momentary 1 inverter PCB-mount terminals lamp socket T5,5K suitable actuators gold-plated 1.5μm
CTLP_485
Terminal Blocks
Enclosures
contact material
CLP_485
Limit Switches
suitable pilot light heads
Pedal Switches
Lampholder PCB-mount terminals lamp socket T5,5K
Type Index
3
Bus Technology
Panel Mount Jacks
contact material
Æ Contact Blocks
3
Description
Control Units
Illustration
About Us
PCB-mount terminals
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - § +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz
471
Contact Blocks
made in germany
screw connection
About Us
Illustration
Description
3
Type
Contact Unit, momentary, with 2-colour LED red/green 1 inverter screw connection
Control Units
Æ Contact Blocks
suitable actuators contact material 3
4 2
Panel Mount Jacks
+ 24/ V red + 24/ V blue + 24/ V green
1
mass
gold-plated 1.5μm
Contact Unit, momentary, incl. RGB LED 1 inverter screw connection
CTFS_24R_G CTFS_24RGB
suitable actuators
Bus Technology Enclosures
Assembled PCB Strips screw connection specially designed for the elevator industry, with 12 illuminated electronic contact units (snap action type). Plug-in bridge connectors allow easy changeover from positive to negative logic. The strips can easily be separated as required. The power supply lines are guided through the predetermined breaking points. Each pushbutton is assigned a full set of terminals. For technical data of the contact unit, refer to type CTLP
PCD3012
suitable actuators
Terminal Blocks Pedal Switches Limit Switches Type Index
Ultra-bright LED, T5,5K socket, 12V with integrated series resistor and half-wave rectifier, for 12 V AC/DC (7/14 mA) When connecting to DC, the correct polarity must be observed: + ... X1/- ... X2 storage temperature: -25°C ... +80°C ambient temperature: -20°C ... +60°C voltage tolerance: + 10 % colour
472
white
L5,5K12UW
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - § +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz
Contact Blocks
made in germany
Two-colour LED, T5,5K socket - 24V with integrated series resistor colour dependent on polarity Storage temperature: -25°C ... +80°C Ambient temperature: -20°C ... +60°C Voltage tolerance:+ 10 % Colour: red Rated current [mA]: 14 Brightness [mcd]: 2300 Dominant wavelength: [nm] 625
colour
green 13 650 525
red/green
L5,5K24RG
Æ Contact Blocks
Control Units
Ultra-bright LED, T5,5K socket, 24V with integrated series resistor and half-wave rectifier, for 24 V AC/DC (7/14 mA) When connecting to DC, the correct polarity must be observed: + ... X1/- ... X2 storage temperature: -25°C ... +80°C ambient temperature: -20°C ... +60°C voltage tolerance: + 10 % colour white L5,5K24UW
Panel Mount Jacks
Type
Bus Technology
Description
Enclosures
Illustration
About Us
PCB-mount terminals
white
LED Adapter for LEDs of 3 and 5 mm Ø to be used in T5.5K sockets, an external resistor must be provided.
LA5,5
T5,5K
Type Index
Limit Switches
lamp socket
LED3UW
Pedal Switches
3680 mcd
Terminal Blocks
Ultra-bright LED solder pins, grid 2.54 mm ready-made for CTP_485
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - § +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz
473
General Data Type Reference: Description: Approvals: Protection class: Operation travel: Connection type: Contact material: Max. storage temperature: Max. operating temperature:
Mechanical life: Electrical life (rated load): Contact resistance NO: Contact resistance NC: Bouncing time NO: Bouncing time NC:
CTP... Electronic Contact block, PCB-mount terminals, with snap action CCC, cCSAus, NV, CE II (protective insulation) 3 mm PCB-mount terminals gold-plated 1.5μm -50°C ... 85°C -30°C ... 70°C, without illumination -30°C ... 55°C, using incandescent lamps -30°C ... 65°C, using LEDs 1 m switching cycles 1m operations at rated load < 50 mOhm (new state) < 100 mOhm (new state) < 10ms < 10ms
Technical Data - Lamp Lamp socket: Max. lamp voltage: Max. lamp output: Definition:
T5,5K 60V 1.2W X1...anode, X2...cathode
Electrical Features Rated voltage: Rated current:
20mV ... 48V AC/DC 0.01mA ... 100mA
Electrical data acc. to IEC/EN 60947-5-1 (VDE 0660 Sect. 200) Utilisation category: Rated insulation voltage Ui: Rated operating voltage Ue: Rated operating current Ie: Continuous thermal current:
alternate current AC12 60V 48V 0.1A 100mA
direct current DC12 60V 48V 0.1A 100mA
Remark GB14048.5-2008 (IEC60947-5-1)
Elektrische Daten nach C22.2 No. 14-10 Rated voltage: Rated current:
20mV ... 48V AC/DC 0.01mA ... 100mA
469
Mounting Instructions
About Us
1.
Control Units
Æ Contact Blocks
2.
Panel Mount Jacks
3.
Bus Technology Enclosures Terminal Blocks Pedal Switches Limit Switches Type Index 470
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - § +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz
Contact Blocks
made in germany
Type
Contact Unit, momentary 1 inverter PCB-mount terminals 2 holes allow direct soldering of an LED into the PCB suitable actuators gold-plated 1.5μm
CTP_485
Illuminated Contact Unit, momentary 1 inverter PCB-mount terminals lamp socket T5,5K suitable actuators gold-plated 1.5μm
CTLP_485
Terminal Blocks
Enclosures
contact material
CLP_485
Limit Switches
suitable pilot light heads
Pedal Switches
Lampholder PCB-mount terminals lamp socket T5,5K
Type Index
3
Bus Technology
Panel Mount Jacks
contact material
Æ Contact Blocks
3
Description
Control Units
Illustration
About Us
PCB-mount terminals
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - § +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz
471
Contact Blocks
made in germany
screw connection
About Us
Illustration
Description
3
Type
Contact Unit, momentary, with 2-colour LED red/green 1 inverter screw connection
Control Units
Æ Contact Blocks
suitable actuators contact material 3
4 2
Panel Mount Jacks
+ 24/ V red + 24/ V blue + 24/ V green
1
mass
gold-plated 1.5μm
Contact Unit, momentary, incl. RGB LED 1 inverter screw connection
CTFS_24R_G CTFS_24RGB
suitable actuators
Bus Technology Enclosures
Assembled PCB Strips screw connection specially designed for the elevator industry, with 12 illuminated electronic contact units (snap action type). Plug-in bridge connectors allow easy changeover from positive to negative logic. The strips can easily be separated as required. The power supply lines are guided through the predetermined breaking points. Each pushbutton is assigned a full set of terminals. For technical data of the contact unit, refer to type CTLP
PCD3012
suitable actuators
Terminal Blocks Pedal Switches Limit Switches Type Index
Ultra-bright LED, T5,5K socket, 12V with integrated series resistor and half-wave rectifier, for 12 V AC/DC (7/14 mA) When connecting to DC, the correct polarity must be observed: + ... X1/- ... X2 storage temperature: -25°C ... +80°C ambient temperature: -20°C ... +60°C voltage tolerance: + 10 % colour
472
white
L5,5K12UW
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - § +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz
Contact Blocks
made in germany
Two-colour LED, T5,5K socket - 24V with integrated series resistor colour dependent on polarity Storage temperature: -25°C ... +80°C Ambient temperature: -20°C ... +60°C Voltage tolerance:+ 10 % Colour: red Rated current [mA]: 14 Brightness [mcd]: 2300 Dominant wavelength: [nm] 625
colour
green 13 650 525
red/green
L5,5K24RG
Æ Contact Blocks
Control Units
Ultra-bright LED, T5,5K socket, 24V with integrated series resistor and half-wave rectifier, for 24 V AC/DC (7/14 mA) When connecting to DC, the correct polarity must be observed: + ... X1/- ... X2 storage temperature: -25°C ... +80°C ambient temperature: -20°C ... +60°C voltage tolerance: + 10 % colour white L5,5K24UW
Panel Mount Jacks
Type
Bus Technology
Description
Enclosures
Illustration
About Us
PCB-mount terminals
white
LED Adapter for LEDs of 3 and 5 mm Ø to be used in T5.5K sockets, an external resistor must be provided.
LA5,5
T5,5K
Type Index
Limit Switches
lamp socket
LED3UW
Pedal Switches
3680 mcd
Terminal Blocks
Ultra-bright LED solder pins, grid 2.54 mm ready-made for CTP_485
Georg Schlegel GmbH & Co. KG - 88525 Dürmentingen - § +49 (0) 73 71 / 502-0 - Fax: +49 (0) 73 71 / 502 49 - [email protected] - www.schlegel.biz
473
