V-DAMP 4300 PI
4300
®
Liquid Applied Sound Deadener (LASD) V-DAMP® 4300 is a high performance, viscoelastic, liquid applied sound deadener specially formulated for use in automotive paint shops. It is an acrylic based, 0 VOC, bakeable thick film coating that is designed as an interior sound pad replacement. It is highly effective in reducing vibration resonance conditions in structures such as automobiles, trucks, buses, and other vehicles. V-DAMP® 4300 can be applied using MSA or Molsa application equipment. After ® application, uncured V-DAMP 4300 cleans up with water. V-DAMP® 4300 is also specially formulated to withstand automotive paint bake oven temperatures up to 190°C for 60 minutes without blistering or cracking and can withstand subsequent baking cycles of 130°C for 25 minutes with no effect. V-DAMP® 4300 offers the automotive NVH engineer a cost effective, automated alternative to manually applied mastic sound pads. An overall weight savings over the mastic pads could also be expected. V-Damp 4300 Composite Loss Factor Versus Temperature, (200 Hz) 2mm Wet Applied Film, 7.95 grams Dry Film, SAE J-1637
0.2500
Composite Loss Factor
0.2000
0.1500
0.1000
0.0500
0.0000 -15
-5
5
15
25
35
45
Temperature (C)
Nominal Bake Cycle (163C for 25 minutes plus 130C for 25 minutes)
Page 1 of 3
55
65
V-Damp 4300 Composite Loss Factor Versus Temperature, (400 Hz) 2mm Wet Applied Film, 7.95 grams Dry Film, SAE J-1637
0.2500
Composite Loss Factor
0.2000
0.1500
0.1000
0.0500
0.0000 -15
-5
5
15
25
35
45
55
65
55
65
Temperature (C)
Nominal Bake Cycle (163C for 25 minutes plus 130C for 25 minutes)
V-Damp 4300 Composite Loss Factor Versus Temperature, (800 Hz) 2mm Wet Applied Film, 7.95 grams Dry Film, SAE J-1637
0.3000
Composite Loss Factor
0.2500
0.2000
0.1500
0.1000
0.0500
0.0000 -15
-5
5
15
25
35
45
Temperature (C)
Nominal Bake Cycle (163C for 25 minutes plus 130C for 25 minutes)
June 22, 1010:kc
Page 2 of 3
APPLICATION Surface must be clean and free of oil and foreign matter. Adhesion is very good on electro-coat primed steel, stainless steel, bonderized steel, primed steel, wash-primed galvanized sheet metal, and wash-primed aluminum. Multi-Stream Application (MSA), Molsa spray mastic type equipment or similar is recommended for automatic applications. Airless spray is typical for manual applications (contact Daubert for recommendations). Graco Molsa Tip – 0.035 4-inch applicator connected to a unidrum bulk unloader using a precision LT fluid metering system. Automated application using robotics is typical (Fanuc, ABB, or equal). Gun programming to minimize on/off cycling will maximize equipment life and improve application efficiency. DRYING – Typical Bake Cycles o
o
o
o
20 minutes 25 C, 20 minutes 163 C, 20 minutes 25 C, 25 minutes 130 C. V-DAMP 4300 can also be air-dried without baking. THINNING
Product is ready for use as received.
CLEAN-UP
After use, equipment may be flushed with water.
PHYSICAL PROPERTIES (TYPICAL) Color Viscosity Solids by Weight Solids by Volume
Black 70,000cps (#7 @ 20 rpm) 79 % 62 %
Specific Gravity (as supplied) Weight per Gallon (as supplied) Specific Gravity (dried film) Flash Point VOC (EPA Method #24) Non-Bleeding Odor After Drying Latex Emulsion
1.81 15.1 2.3 None 0 lbs./gal. (water-based coating) Non-Asphaltic None Protect From Freezing
CAUTION: The data, statements and WARRANTY: Daubert Chemical Company, Inc. (“Daubert”) warrants all products manufactured by recommendations set forth in this product it to be free from defects in material and workmanship. DAUBERT MAKES NO OTHER information sheet are based on testing, WARRANTIES, WHETHER, EXPRESSED OR IMPLIED, WITH RESPECT TO SUCH PRODUCTS, research and other development work AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED which has been carefully conducted by us, TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR and we believe such data, statements and PURPOSE AND IMPLIED WARRANTIES ARISING FROM A COURSE OF DEALING OR USAGE recommendations will serve as reliable OF TRADE, ARE DISCLAIMED BY DAUBERT. All claims hereunder must be made in writing within guidelines. However, this product is 30 days after receipt of the products at the buyer’s plant and prior to further processing the products subject to numerable uses under varying or combining them with other materials or products. Daubert’s liability, whether under this warranty conditions over which we have no control, or in contract, tort, negligence or otherwise, is limited to the return of the net purchase price paid for and accordingly, we do NOT warrant that any products proven defective or, at Daubert’s option, to the repair or replacement of said products this product is suitable for any particular upon their return, transportation prepaid, to Daubert. THE REMEDY HEREBY PROVIDED SHALL use. Users are advised to test the product BE THE EXCLUSIVE AND SOLE REMEDY OF THE BUYER, AND UNDER NO CIRCUMSTANCES in advance to make certain it is suitable SHALL DAUBERT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. No Daubert for their particular production conditions representative or other person is authorized to change this warranty in any way or to assume for and particular use or uses. Daubert any other liability in connection with the sale or use of its products. REFER TO MATERIAL SAFETY DATA SHEET FOR HEALTH AND SAFETY INFORMATION.
4700 South Central Avenue ■ Chicago, IL 60638 ■ 1-800-688-0459 ■ or 708-496-7350 ■ Fax: 708-496-7367 Visit our web site at www.daubert.com ■ Our e-mail is [email protected]
PAGE 3 OF 3
®
Liquid Applied Sound Deadener (LASD) V-DAMP® 4300 is a high performance, viscoelastic, liquid applied sound deadener specially formulated for use in automotive paint shops. It is an acrylic based, 0 VOC, bakeable thick film coating that is designed as an interior sound pad replacement. It is highly effective in reducing vibration resonance conditions in structures such as automobiles, trucks, buses, and other vehicles. V-DAMP® 4300 can be applied using MSA or Molsa application equipment. After ® application, uncured V-DAMP 4300 cleans up with water. V-DAMP® 4300 is also specially formulated to withstand automotive paint bake oven temperatures up to 190°C for 60 minutes without blistering or cracking and can withstand subsequent baking cycles of 130°C for 25 minutes with no effect. V-DAMP® 4300 offers the automotive NVH engineer a cost effective, automated alternative to manually applied mastic sound pads. An overall weight savings over the mastic pads could also be expected. V-Damp 4300 Composite Loss Factor Versus Temperature, (200 Hz) 2mm Wet Applied Film, 7.95 grams Dry Film, SAE J-1637
0.2500
Composite Loss Factor
0.2000
0.1500
0.1000
0.0500
0.0000 -15
-5
5
15
25
35
45
Temperature (C)
Nominal Bake Cycle (163C for 25 minutes plus 130C for 25 minutes)
Page 1 of 3
55
65
V-Damp 4300 Composite Loss Factor Versus Temperature, (400 Hz) 2mm Wet Applied Film, 7.95 grams Dry Film, SAE J-1637
0.2500
Composite Loss Factor
0.2000
0.1500
0.1000
0.0500
0.0000 -15
-5
5
15
25
35
45
55
65
55
65
Temperature (C)
Nominal Bake Cycle (163C for 25 minutes plus 130C for 25 minutes)
V-Damp 4300 Composite Loss Factor Versus Temperature, (800 Hz) 2mm Wet Applied Film, 7.95 grams Dry Film, SAE J-1637
0.3000
Composite Loss Factor
0.2500
0.2000
0.1500
0.1000
0.0500
0.0000 -15
-5
5
15
25
35
45
Temperature (C)
Nominal Bake Cycle (163C for 25 minutes plus 130C for 25 minutes)
June 22, 1010:kc
Page 2 of 3
APPLICATION Surface must be clean and free of oil and foreign matter. Adhesion is very good on electro-coat primed steel, stainless steel, bonderized steel, primed steel, wash-primed galvanized sheet metal, and wash-primed aluminum. Multi-Stream Application (MSA), Molsa spray mastic type equipment or similar is recommended for automatic applications. Airless spray is typical for manual applications (contact Daubert for recommendations). Graco Molsa Tip – 0.035 4-inch applicator connected to a unidrum bulk unloader using a precision LT fluid metering system. Automated application using robotics is typical (Fanuc, ABB, or equal). Gun programming to minimize on/off cycling will maximize equipment life and improve application efficiency. DRYING – Typical Bake Cycles o
o
o
o
20 minutes 25 C, 20 minutes 163 C, 20 minutes 25 C, 25 minutes 130 C. V-DAMP 4300 can also be air-dried without baking. THINNING
Product is ready for use as received.
CLEAN-UP
After use, equipment may be flushed with water.
PHYSICAL PROPERTIES (TYPICAL) Color Viscosity Solids by Weight Solids by Volume
Black 70,000cps (#7 @ 20 rpm) 79 % 62 %
Specific Gravity (as supplied) Weight per Gallon (as supplied) Specific Gravity (dried film) Flash Point VOC (EPA Method #24) Non-Bleeding Odor After Drying Latex Emulsion
1.81 15.1 2.3 None 0 lbs./gal. (water-based coating) Non-Asphaltic None Protect From Freezing
CAUTION: The data, statements and WARRANTY: Daubert Chemical Company, Inc. (“Daubert”) warrants all products manufactured by recommendations set forth in this product it to be free from defects in material and workmanship. DAUBERT MAKES NO OTHER information sheet are based on testing, WARRANTIES, WHETHER, EXPRESSED OR IMPLIED, WITH RESPECT TO SUCH PRODUCTS, research and other development work AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED which has been carefully conducted by us, TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR and we believe such data, statements and PURPOSE AND IMPLIED WARRANTIES ARISING FROM A COURSE OF DEALING OR USAGE recommendations will serve as reliable OF TRADE, ARE DISCLAIMED BY DAUBERT. All claims hereunder must be made in writing within guidelines. However, this product is 30 days after receipt of the products at the buyer’s plant and prior to further processing the products subject to numerable uses under varying or combining them with other materials or products. Daubert’s liability, whether under this warranty conditions over which we have no control, or in contract, tort, negligence or otherwise, is limited to the return of the net purchase price paid for and accordingly, we do NOT warrant that any products proven defective or, at Daubert’s option, to the repair or replacement of said products this product is suitable for any particular upon their return, transportation prepaid, to Daubert. THE REMEDY HEREBY PROVIDED SHALL use. Users are advised to test the product BE THE EXCLUSIVE AND SOLE REMEDY OF THE BUYER, AND UNDER NO CIRCUMSTANCES in advance to make certain it is suitable SHALL DAUBERT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES. No Daubert for their particular production conditions representative or other person is authorized to change this warranty in any way or to assume for and particular use or uses. Daubert any other liability in connection with the sale or use of its products. REFER TO MATERIAL SAFETY DATA SHEET FOR HEALTH AND SAFETY INFORMATION.
4700 South Central Avenue ■ Chicago, IL 60638 ■ 1-800-688-0459 ■ or 708-496-7350 ■ Fax: 708-496-7367 Visit our web site at www.daubert.com ■ Our e-mail is [email protected]
PAGE 3 OF 3
