Vornado Zippi Fan Teardown
Vornado Zippi Fan Teardown
Vornado Zippi Fan Teardown Take apart the Vornado Zippi desktop fan.
Written By: Nathan Lentz
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Vornado Zippi Fan Teardown
TOOLS: Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Vornado Zippi Fan Teardown
Step 1 — Removing Stand
Pull the stand out of the enclosure on each side
Step 2 — Remove Blades and Speed Control
Remove the blades by pulling away from the enclosure
Remove the speed control by pulling away from the enclosure
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Vornado Zippi Fan Teardown
Step 3 — Remove Guard Screws
Remove the 4 screws coupling the orange plastic enclosure and black plastic guard
Step 4 — Remove Enclosure Screws
Remove the screw coupling the top half of the enclosure
Remove the screw coupling the bottom of the enclosure, near the power cable
Remove the screw beneath the rubber inserts holding the stand
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Vornado Zippi Fan Teardown
Step 5 — Remove Enclosure and Guard
Separate the two halves of the enclosure, leaving the power cable, switch, motor and guard
Remove the 2 screws attaching the guard to the motor
Step 6 — Remove Switch
Remove the 2 screws holding the switch in the mount connected to the motor
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Vornado Zippi Fan Teardown
Step 7 — Remove Switch Mount
Remove the two screws securing the switch mount to the motor
This document was last generated on 2017-06-21 07:21:43 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
Vornado Zippi Fan Teardown Take apart the Vornado Zippi desktop fan.
Written By: Nathan Lentz
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 6
Vornado Zippi Fan Teardown
TOOLS: Screwdriver (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 6
Vornado Zippi Fan Teardown
Step 1 — Removing Stand
Pull the stand out of the enclosure on each side
Step 2 — Remove Blades and Speed Control
Remove the blades by pulling away from the enclosure
Remove the speed control by pulling away from the enclosure
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 6
Vornado Zippi Fan Teardown
Step 3 — Remove Guard Screws
Remove the 4 screws coupling the orange plastic enclosure and black plastic guard
Step 4 — Remove Enclosure Screws
Remove the screw coupling the top half of the enclosure
Remove the screw coupling the bottom of the enclosure, near the power cable
Remove the screw beneath the rubber inserts holding the stand
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 6
Vornado Zippi Fan Teardown
Step 5 — Remove Enclosure and Guard
Separate the two halves of the enclosure, leaving the power cable, switch, motor and guard
Remove the 2 screws attaching the guard to the motor
Step 6 — Remove Switch
Remove the 2 screws holding the switch in the mount connected to the motor
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 6
Vornado Zippi Fan Teardown
Step 7 — Remove Switch Mount
Remove the two screws securing the switch mount to the motor
This document was last generated on 2017-06-21 07:21:43 PM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 6 of 6
