WEHT Series - Depco Pump Company
TECHNICAL BROCHURE B3885HT R3
FEATURES Impeller: Cast iron, semi-open, non-clog with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option. Casing: Cast iron volute type for maximum efficiency. 2" NPT discharge. Mechanical Seal: Silicon Carbide vs. Silicon Carbide sealing faces. Stainless steel metal parts, BUNA-N elastomers. Shaft: Corrosion-resistant, stainless steel. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation. Fasteners: 300 series stainless steel. Temperature rating 200ºF for continuous operation when fully submerged. Capable of running dry without damage to components.
WEHT Series Model 3885HT SUBMERSIBLE HIGH TEMPERATURE SUMP PUMPS
Goulds Water Technology Wastewater APPLICATIONS
MOTORS
Specifically designed for the following uses:
• Fully submerged in high-grade turbine oil for lubrication and efficient heat transfer. • Class B insulation
• Boiler blow down, high temp condensate SPECIFICATIONS
Single phase (60 Hz):
Pump
• Capacitor start motors for maximum starting torque. • Built-in overload with automatic reset. • SJOOW severe duty oil and water resistant power
• Solids handling capabilities: 3⁄4" maximum • Discharge size: 2" NPT • Capacities: up to 70 GPM • Total heads: up to 27 feet TDH • Temperature:
cords, rated for high temperature.
• Models have NEMA three prong grounding plugs.
200°F (93°C) continuous, fully submerged
AGENCY LISTINGS
• See order numbers on reverse side for specific HP, voltage and phase.
PENDIN ®
• Available with 1½” connection and high temp float if required. See model chart on page 3.
C
US
METERS FEET 40
35 10
2 GPM
TOTAL DYNAMIC HEAD
30
G
Tested to UL 778 and CSA 22.2 108 Standards By Canadian Standards Association File #LR38549
MODEL: WEHT03xxM SIZE: 2" Discharge RPM: 1750 HP: .33 HP SOLIDS: 3/4" Diameter
1 FT
WEHT03M
25
20 5 15
10
68ºF (20ºC) Derate at 200ºF (93ºC)
5
0
0
0 0
PAGE 2
10
20
30 5
40 10 CAPACITY
50
60
70 15
GPM 80 m3/hr
Goulds Water Technology Wastewater MODELS Order Number HP Phase Volts RPM
Resistance Impeller Max. KVA Full Load Wt. Opera- DisLRA Dia. (In.) Amps Code Motor Eff. Start Line-Line (Lbs.) tion charge
WEHT0311M
115
12
31.1
J
55
9.3
1.4
WEHT0318M
208
7.3
19.5
K
51
9.1
4.2
WEHT0312M
230
6.1
16.5
J
54
11.7
5.6
WEHT0311M15
115
12
31.1
J
55
9.3
1.4
WEHT0318M15
208
7.3
19.5
K
51
9.1
4.2
6.1
16.5
J
54
11.7
5.6
12
31.1
J
55
9.3
1.4
WEHT0312M15
1/3
WEHT0311MP1
230
1
115
1750
5.38"
WEHT0318MP1
208
7.3
19.5
K
51
9.1
4.2
WEHT0312MP1
230
6.1
16.5
J
54
11.7
5.6
WEHT0311MP115
115
12
31.1
J
55
9.3
1.4
WEHT0318MP115
208
7.3
19.5
K
51
9.1
4.2
WEHT0312MP115
230
6.1
16.5
J
54
11.7
5.6
2" Manual 1½" 56 Automatic Float Included
2"
1½"
Accessory part numbers: A2HT31 – 115V and A2HT32 – 208 and 230V (ultra high-temperature float switch)
NOMENCLATURE WE
HT
03
1
1
M
P1
15
15 = SS 1½" discharge Connection Included P1 = Ultra High Temperature Float Included M = Standard Impeller 1 = 115 V 8 = 208 V 2 = 230 V 1 = 1 Phase
03 = 1/3 HP
HT = 200º F
WE = 3885 model
PAGE 3
DIMENSIONS
COMPONENTS
(All dimensions are in inches. Do not use for construction purposes.)
111⁄2" ROTATION
53⁄4" 16"
2" NPT ¾" *
81⁄2"
Item No. 1 2 3 4 5 6 7 8
Description Impeller Casing Mechanical Seal Motor Shaft Motor Ball Bearings Power Cable Casing O-Ring
31⁄4" KICK-BACK
⁄8"
7
7
* 2" x 1½" adapter if used 5
6 4
8
1 2
Xylem, Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (866) 325-4210 Fax: (888) 322-5877 www.xyleminc.com/brands/gouldswatertechnology Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. © 2012 Xylem Inc.
B3885HT R3
December 2012
3
FEATURES Impeller: Cast iron, semi-open, non-clog with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option. Casing: Cast iron volute type for maximum efficiency. 2" NPT discharge. Mechanical Seal: Silicon Carbide vs. Silicon Carbide sealing faces. Stainless steel metal parts, BUNA-N elastomers. Shaft: Corrosion-resistant, stainless steel. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation. Fasteners: 300 series stainless steel. Temperature rating 200ºF for continuous operation when fully submerged. Capable of running dry without damage to components.
WEHT Series Model 3885HT SUBMERSIBLE HIGH TEMPERATURE SUMP PUMPS
Goulds Water Technology Wastewater APPLICATIONS
MOTORS
Specifically designed for the following uses:
• Fully submerged in high-grade turbine oil for lubrication and efficient heat transfer. • Class B insulation
• Boiler blow down, high temp condensate SPECIFICATIONS
Single phase (60 Hz):
Pump
• Capacitor start motors for maximum starting torque. • Built-in overload with automatic reset. • SJOOW severe duty oil and water resistant power
• Solids handling capabilities: 3⁄4" maximum • Discharge size: 2" NPT • Capacities: up to 70 GPM • Total heads: up to 27 feet TDH • Temperature:
cords, rated for high temperature.
• Models have NEMA three prong grounding plugs.
200°F (93°C) continuous, fully submerged
AGENCY LISTINGS
• See order numbers on reverse side for specific HP, voltage and phase.
PENDIN ®
• Available with 1½” connection and high temp float if required. See model chart on page 3.
C
US
METERS FEET 40
35 10
2 GPM
TOTAL DYNAMIC HEAD
30
G
Tested to UL 778 and CSA 22.2 108 Standards By Canadian Standards Association File #LR38549
MODEL: WEHT03xxM SIZE: 2" Discharge RPM: 1750 HP: .33 HP SOLIDS: 3/4" Diameter
1 FT
WEHT03M
25
20 5 15
10
68ºF (20ºC) Derate at 200ºF (93ºC)
5
0
0
0 0
PAGE 2
10
20
30 5
40 10 CAPACITY
50
60
70 15
GPM 80 m3/hr
Goulds Water Technology Wastewater MODELS Order Number HP Phase Volts RPM
Resistance Impeller Max. KVA Full Load Wt. Opera- DisLRA Dia. (In.) Amps Code Motor Eff. Start Line-Line (Lbs.) tion charge
WEHT0311M
115
12
31.1
J
55
9.3
1.4
WEHT0318M
208
7.3
19.5
K
51
9.1
4.2
WEHT0312M
230
6.1
16.5
J
54
11.7
5.6
WEHT0311M15
115
12
31.1
J
55
9.3
1.4
WEHT0318M15
208
7.3
19.5
K
51
9.1
4.2
6.1
16.5
J
54
11.7
5.6
12
31.1
J
55
9.3
1.4
WEHT0312M15
1/3
WEHT0311MP1
230
1
115
1750
5.38"
WEHT0318MP1
208
7.3
19.5
K
51
9.1
4.2
WEHT0312MP1
230
6.1
16.5
J
54
11.7
5.6
WEHT0311MP115
115
12
31.1
J
55
9.3
1.4
WEHT0318MP115
208
7.3
19.5
K
51
9.1
4.2
WEHT0312MP115
230
6.1
16.5
J
54
11.7
5.6
2" Manual 1½" 56 Automatic Float Included
2"
1½"
Accessory part numbers: A2HT31 – 115V and A2HT32 – 208 and 230V (ultra high-temperature float switch)
NOMENCLATURE WE
HT
03
1
1
M
P1
15
15 = SS 1½" discharge Connection Included P1 = Ultra High Temperature Float Included M = Standard Impeller 1 = 115 V 8 = 208 V 2 = 230 V 1 = 1 Phase
03 = 1/3 HP
HT = 200º F
WE = 3885 model
PAGE 3
DIMENSIONS
COMPONENTS
(All dimensions are in inches. Do not use for construction purposes.)
111⁄2" ROTATION
53⁄4" 16"
2" NPT ¾" *
81⁄2"
Item No. 1 2 3 4 5 6 7 8
Description Impeller Casing Mechanical Seal Motor Shaft Motor Ball Bearings Power Cable Casing O-Ring
31⁄4" KICK-BACK
⁄8"
7
7
* 2" x 1½" adapter if used 5
6 4
8
1 2
Xylem, Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (866) 325-4210 Fax: (888) 322-5877 www.xyleminc.com/brands/gouldswatertechnology Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. © 2012 Xylem Inc.
B3885HT R3
December 2012
3
