WIMA MP 3-X2
D
WIMA MP 3-X2 Metallized Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features
Electrical Data
˜ Particularly high reliability against active and passive flammability ˜ Excellent self-healing as well as high voltage strength ˜ High degree of interference suppression due to good attenuation and low ESR ˜ For temperatures up to +110° C ˜ According to RoHS 2002/95/EC
Typical Applications Class X2 RFI applications to meet EMC regulations ˜ Capacitors connected to the mains between phase and neutral or phase and phase conductors ˜ Installation category II in accordance with IEC 60664, pulse peak voltage T 2.5 kV
Construction Dielectric: Paper, epoxy resin impregnated Capacitor electrodes: Vacuum-deposited Internal construction:
Capacitance range: 1000 pF to 1.0 mF (E12-values on request) Rated voltages: 250 VAC, 275 VAC Continuous DC voltage* (general guide): 630 V Capacitance tolerances: ±20% Operating temperature range: –40) C to +110) C Climatic test category: 40/110/56/C in accordance with IEC Insulation resistance at +20+ C: C T 0.33 mF: 12 x 10 3 M¸ C 0.33 mF: 4000 sec (M¸ x mF) Measuring voltage: 100 V/1 min. Dissipation factors: tan d T 13 x 10 –3 at 1 kHz and +20+ C Test specifications: In accordance with DIN EN 60384-14 Approvals:
Maximum pulse rise time: Capacitance pF/mF
1000 1100 1500 1100 2200 ... 4700 500 6800 ... 0.022 300 0.033 ... 0.047 200 0.068 ... 1.0 100
for pulses equal to a voltage amplitude with 2 x UAC = 390 V according to IEC 60384-14 Test voltage: 2700 VDC, 2 sec. Reliability: Operational life 300 000 hours Failure rate 1 fit (0.5 x U r and 40) C)
Country Authority Specification Symbol Germany VDE USA Canada
V DIN EN 132 400 D E IEC 60384-14/2 EN 132 400
UL CSA
Pulse rise time V/msec max. operation
UL 1283 C 22.2 No. 8
Approval-No. Approval-No. 250 VAC 275 VAC 89749
89749
E 100438
E 100438
LR 93312-1
LR 93312-1
Capacitor paper Vacuum-deposited electrode Metal contact layer (schoopage) Terminating wire
Encapsulation: Self-extinguishing epoxy resin, UL 94 V-0, metal foil Terminations: Tinned wire. Marking: Marking: Black on Silver.
Mounting Recommendation To minimize or avoid shock and/or vibration stresses to terminating wires and solder connections we recommend to fix voluminous resin-potted MP capacitors as from e.g. PCM 22.5 mm in an appropriate way since for constructional reasons they do not sit tight on the board.
Packing Available taped and reeled up to and including PCM 22.5 mm. Detailed taping information and graphs at the end of the catalogue. For further details and graphs please refer to Technical Information.
* If safety-approved EMI suppression capacitors are operated with a DC voltage being above the specified AC voltage rating the given approvals are no longer valid (DIN EN 60384-14). Furthermore the permissible pulse rise time du/dt (F max.) will be subject to a reduction according to
if the DC operating voltage UDC is higher than 2 x UAC
92
01.10
Fmax. = F r x 2 x UAC / UDC
D
WIMA MP 3-X2 Continuation
General Data Capacitance
W
H
1000 pF
4
8.5
1500 „
4
2200 „ 3300 „
L
250 VAC * PCM**
275 VAC * PCM**
Part number
W
H
L
13.5 10
MPX20W1100FA00_ _ _ _
4
8.5
13.5 10
MPX21W1100FA00_ _ _ _
Part number
8.5
13.5 10
MPX20W1150FA00_ _ _ _
4
8.5
13.5 10
MPX21W1150FA00_ _ _ _
4
8.5
13.5 10
MPX20W1220FA00_ _ _ _
4
8.5
13.5 10
MPX21W1220FA00_ _ _ _
4
8.5
13.5 10
MPX20W1330FA00_ _ _ _
4
8.5
13.5 10
MPX21W1330FA00_ _ _ _
4700 „
5
10
13.5 10
MPX20W1470FB00_ _ _ _
5
10
13.5 10
MPX21W1470FB00_ _ _ _
6800 „
5
13
19
15
MPX20W1680FC00_ _ _ _
5
13
19
15
MPX21W1680FC00_ _ _ _
0.01 mF
5
13
19
15
MPX20W2100FC00_ _ _ _
5
13
19
15
MPX21W2100FC00_ _ _ _
0.015 „
5
13
19
15
MPX20W2150FC00_ _ _ _
5
13
19
15
MPX21W2150FC00_ _ _ _
0.022 „
5
13
19
15
MPX20W2220FC00_ _ _ _
5
13
19
15
MPX21W2220FC00_ _ _ _
0.033 „
6
14
19
15
MPX20W2330FD00_ _ _ _
6
14
19
15
MPX21W2330FD00_ _ _ _
0.047 „
7
15
19
15
MPX20W2470FE00_ _ _ _
7
15
19
15
MPX21W2470FE00_ _ _ _
0.068 „
8
17
19
15
MPX20W2168FF00_ _ _ _
8
17
19
15
MPX21W2680FF00_ _ _ _
0.1 mF
10
18
19
15
MPX20W3100FG00_ _ _ _
10
18
19
15
MPX21W3100FG00_ _ _ _
8
20
28
22.5
MPX20W3100FH00_ _ _ _
8
20
28
22.5
MPX21W3100FH00_ _ _ _
0.15 „
8
20
28
22.5
MPX20W3150FH00_ _ _ _
8
20
28
22.5
MPX21W3150FH00_ _ _ _
0.22 „
10
22
28
22.5
MPX20W3220FI00_ _ _ _
10
22
28
22.5
MPX21W3220FI00_ _ _ _
0.33 „
12
24
28
22.5
MPX20W3330FJ00_ _ _ _
12
24
28
22.5
MPX21W3330FJ00_ _ _ _
0.47 „
13
25
33
27.5
MPX20W3470FK00_ _ _ _
13
25
33
27.5
MPX21W3470FK00_ _ _ _
0.68 „
15
26
33
27.5
MPX20W3680FL00_ _ _ _
15
26
33
27.5
MPX21W3690FL00_ _ _ _
1.0 mF
20
32
33
27.5
MPX20W4100FM00_ _ _ _
20
32
33
27.5
MPX21W4100FM00_ _ _ _
* f = 50/60 Hz ** PCM = Printed circuit module = lead spacing
Part number completion:
Upon request with long leads 35-2 mm max.
Tolerance: 20 % = M Packing: bulk = S Lead length: 6-2 = SD
Dims. in mm.
Taped version see page 140.
W
L
Z
H
1
-10 -00 22 -pF 00 -- - 6 47 8 pF 0. 00 00 -01 pF p PC 0 F .0 -µF M 22 0. 10 µF -04 7 0. µF 1 PC M µF 15
7 5 3
6 -2
d
PCM at the lead exit points ( 0.5)
0.1 7 5 3
0.01
0.1
3
5 7
1
3
5 7 10
3
5 7 100
f/MHz
1000
Impedance change with frequency (general guide)
01.10
Rights reserved to amend design data without prior notification.
.5 22 M PC 5 -27 µF 15 33 CM 0. 22 P 0. -- F 0. µ 0.47 ---- 1.0 --
d = 0.6 P if PCM 10 d = 0.8 P if PCM U 15
10
93
D
Recommendation for Processing and Application of Through-Hole Capacitors
Soldering Process
Wave soldering T
A preheating of through-hole WIMA capacitors is allowed for temperatures T max P 100 ° C. In practice a preheating duration of t P 5 min. has been proven to be best.
260 240 220 200 180 160 140 120 100 80 60 40 20
Single wave soldering Soldering bath temperature: T P 260 ° C Immersion time: t P 5 sec Double wave soldering Soldering bath temperature: T P 260 ° C Immersion time: 2 x t P 3 sec Due to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only.
10 s
[°C] see detailenlargement
2s
3s
t 30
60
90
120
150
180
210
240 [sec]
Typical temperature/time graph for double wave soldering
WIMA Quality and Environmental Philosophy ISO 9001:2000 Certification ISO 9001:2000 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:2000 of our factories by the VDE inspectorate certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards.
WIMA WPCS The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application of WPCS during production process:
All WIMA capacitors, irrespective of whether through-hole devices or SMD, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. – – – – –
Lead PCB CFC Hydrocarbon chloride Chromium 6+
– – – – –
PBB/PBDE Arsenic Cadmium Mercury etc.
RoHS Compliance According to the RoHS Directive 2002/95/EC certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, 2006. For the sake of the environment WIMA has refraind from using such substances since years already.
We merely use pure, recyclable materials for packing our components, such as: ” carton ” cardboard ” adhesive tape made of paper ” polystyrene We almost completely refrain from using packing materials such as: ” foamed polystyrene (Styropor®) ” adhesive tapes made of plastic ” metal clips
Tape for lead-free WIMA capacitors
DIN EN ISO 14001:2005 WIMA’s environmental management has been established in accordance with the guidelines of DIN EN ISO 14001:2005. The certification has been granted in June 2006.
01.10
” incoming material inspection ” metallization ” film inspection ” schoopage ” pre-healing ” lead attachment ” cast resin preparation/ encapsulation ” 100% final inspection ” AQL check
WIMA Environmental Policy
16
D
Typical Dimensions for Taping Configuration Vh
P
P2
Diagram 1: PCM 2.5/5/7.5mm
W
W1
W0
H
H1
W2
P1
D0 d P
t
F P0
H1
P
P1
H
P1
d
d F
P0 P2
Diagram 2: PCM 10/15 mm
Diagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components
Designation Carrier tape width
Dimensions for Radial Taping
Symbol PCM 2.5 taping W
P0
P2
F
18.0 p0.5
PCM 5 taping
PCM 7.5 taping
PCM 10 taping*
PCM 15 taping*
PCM 22.5 taping
PCM 27.5 taping
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing Hold-down tape width W0 6.0 6.0 12.0 12.0 12.0 12.0 12.0 adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape Hole position
W 1
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
Hold-down tape position
W 2
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
Feed hole diameter
D 0
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
12.7 p1.0
12.7 p1.0
12.7 p1.0
25.4 p1.0
25.4 p1.0
38.1 p1.5
4.0 p0.2 3*8.1 p1.5 or 50.8 p1.5
Pitch of component P Feed hole pitch P 0
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
Feed hole centre to lead
P 1
5.1 p0.5
3.85 p0.7
2.6 p0.7
7.7 p0.7
5.2 p0.7
7.8 p0.7
5.3 p0.7
Hole centre to component centre
P 2
6.35 p1.3
6.35 p1.3
6.35 p1.3
12.7 p1.3
12.7 p1.3
19.05 p1.3
19.05 p1.3
Feed hole centre to bottom H edge of the component
16.5 p0.3 18.5 p0.5
16.5 p0.3 18.5 p0.5
16.5 p0.5 18.5 p0.5
16.5 p0.5 18.5 p0.5
16.5 p0.5 18.5 p0.5
16.5 p0.5 18.5 p0.5
16.5 p0.5 18.5 p0.5
Feed hole centre to top H edge of the component 1
H+Hcomponent < H1 32.25 max.
H+Hcomponent < H1 32.25 max.
H+Hcomponent < H1 24.5 to 31.5
H+Hcomponent < H1 25.0 to 31.5
H+Hcomponent < H1 26.0 to 37.0
H+Hcomponent < H1 30.0 to 43.0
H+Hcomponent < H1 35.0 to 45.0
7.5 p0.8
10.0 p0.8
15 p0.8
22.5 p0.8
27.5 p0.8
Lead spacing at +0.8 F 2.5 p0.5 5.0 upper edge of carrier tape –0.2
+0.08
Dh
p 2.0 max.
p 2.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
ROLL/AMMO Package (see also page 141) P 360 max. 52 p2 depending on REEL P 30 p1 B 58 p2 comp. dimensions Unit
0.8
+0,08 –0.05
Component alignment
t
0.8
+0,08 –0.05
0.4 p0.05
„
0.5
+0,06 p0.05 or 0.6 –0.05
d
„
0.5
+0.06 p0.05 or 0.6 –0.05
Lead diameter Total tape thickness
0.5 p0.05
0.8 –0.05
AMMO 52 p2 54 p2 max. P 500 max. B 58 p2 or REEL B 60 p2 REEL PP 360 30 p1 P 25 p1 66 p2 68 p2
depending on PCM and component dimensions
see details page 143.
Dims in mm. * PCM 10 and PCM 15 can be crimped to PCM 7.5. Position of components according to PCM 7.5 (sketch 1). P 0 = 12.7 or 15.0 is possible
140
Please clarify customer-specific deviations with the manufacturer.
01.10
„ Diameter of leads see General Data.
D
Size
PCM
2.5 mm
5 mm
7.5 mm
10 mm
15 mm
22.5 mm
27.5 mm
37.5 mm
142
W 2.5 3 3.8 4.6 5.5 2.5 3 3.5 4.5 4.5 5 5.5 5.5 6.5 7.2 7.2 8.5 8.5 11 2.5 3 4 4.5 5 5.7 7.2 3 4 4 4 5 5 6 6 8 5 5 6 6 7 7 8 8 9 9 10 11 5 6 7 8 8.5 10 10.5 10.5 11 12 9 11 13 13 15 15 17 17 20 20 9 11 13 15 17 19 20 24
H 7 7.5 8.5 9 10 6.5 7.5 8.5 6 9.5 10 7 11.5 8 8.5 13 10 14 16 7 8.5 9 9.5 10.5 12.5 12.5 9 8.5 9 9.5 10 11 12 12.5 12 11 13 12.5 14 14 15 15 17 14 16 18 14 14 15 16.5 20 18.5 22 19 20.5 21 24 19 21 24 25 26 26 29 34.5 32 39.5 19 22 24 26 29 32 39.5 45.5
L 4.6 4.6 4.6 4.6 4.6 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 10 10 10 10.3 10.3 10.3 10.3 13 13.5 13 13 13.5 13 13 13 13 18 19 18 19 18 19 18 19 18 18 19 18 26.5 26.5 26.5 28 26.5 28 26.5 26.5 26.5 28 31.5 31.5 31.5 33 31.5 33 31.5 31.5 33 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5
Codes 0B 0C 0D 0E 0F 1A 1B 1C 1D 1E 1F 1G 1H 1I 1J 1K 1L 1M 1N 2A 2B 2C 2D 2E 2F 2G 3A FA 3C 3D FB 3F 3G 3H 3I 4B FC 4C FD 4D FE 4H FF 4F 4J FG 4M 5A 5B 5D FH 5F FI 5G 5H 5I FJ 6A 6B 6D FK 6F FL 6G 6I FM 6J 7A 7B 7C 7D 7E 7F 7G 7H
pcs. per packaging unit bulk Mini Standard Maxi M S G 1000 5000 10 000 1000 5000 10 000 1000 5000 10 000 1000 5000 10 000 1000 5000 10 000 2000 5000 10 000 1000 5000 – 1000 5000 – 1000 6000 – 1000 4000 – 1000 3500 – 1000 4000 – 500 2500 – 1000 2500 – 500 2500 – 500 2000 – 500 2000 – 500 1500 – 250 1000 – 1000 5000 – 1000 5000 – 1000 4000 – 1000 3500 – 1000 3000 – 2000 – 500 500 1500 – 1000 3000 – 3000 – 500 1000 3000 – 1000 3000 – 500 2000 – 1000 3000 – 2400 – 800 800 2400 – 500 2000 – 800 2400 – 200 1000 2000 – 500 250 1000 400 1600 – 250 1000 1200 – 400 100 500 1200 – 400 300 900 – 100 500 – 300 1000 – 300 1200 – 250 1000 – – 190 760 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Rights reserved to amend design data without prior notification. Samples and pre-production needs on request.
Moulded versions.
pcs. per packaging unit/TPS* Mini Standard X Y – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 115 690 220 880 90 540 170 680 170 680 170 680 75 450 160 640 136 544 112 448 56 336 96 384 48 288 88 176 88 176 36 216 36 144 60 480 51 408 84 252 72 144 66 132 54 108 27 108 21 84 * Tray-Packing-System
01.10
Packing Quantities for Bulk Capacitors and TPS*
D
Packing Units for Taped Capacitors with Radial Leads ROLL Size
PCM
2.5 mm
5 mm
7.5 mm
10 mm
15 mm
22.5 mm
27.5 mm
W 2.5 3 3.8 4.6 5.5 2.5 3 3.5 4.5 4.5 5 5.5 5.5 6.5 7.2 7.2 8.5 8.5 11 2.5 3 4 4.5 5 5.7 7.2 3 4 4 4 5 5 6 6 8 5 5 6 6 7 7 8 8 9 9 10 11 5 6 7 8 8.5 10 10.5 10.5 11 12 9 11 13 15
H 7 7.5 8.5 9 10 6.5 7.5 8.5 6 9.5 10 7 11.5 8 8.5 13 10 14 16 7 8.5 9 9.5 10.5 12.5 12.5 9 8.5 9 9.5 10 11 12 12.5 12 11 13 12.5 14 14 15 15 17 14 16 18 14 14 15 16.5 20 18.5 22 19 20.5 21 24 19 21 24 26
L 4.6 4.6 4.6 4.6 4.6 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 10 10 10 10.3 10.3 10.3 10.3 13 13.5 13 13 13.5 13 13 13 13 18 19 18 19 18 19 18 19 18 18 19 18 26.5 26.5 26.5 28 26.5 28 26.5 26.5 26.5 28 31.5 31.5 31.5 31.5
Codes 0B 0C 0D 0E 0F 1A 1B 1C 1D 1E 1F 1G 1H 1I 1J 1K 1L 1M 1N 2A 2B 2C 2D 2E 2F 2G 3A FA 3C 3D FB 3F 3G 3H 3I 4B FC 4C FD 4D FE 4H FF 4F 4J FG 4M 5A 5B 5D FH 5F FI 5G 5H 5I FJ 6A 6B 6D 6F
Moulded versions.
AMMO 340 x 340 490 x 370 H16.5 H18.5 H16.5 H18.5 A C B D 2800 – 2300 – 1800 – 1500 – 1200 – 2800 – 2300 – 2000 – 1500 – 1500 – 1400 – 1200 – 1200 – 1000 – 1000 – 1000 – 800 – 800 – 700 – 2500 – 2300 4150 1700 3100 1400 2800 1300 – 1100 – 1000 – – 1900 – 1450 – 1450 – 1400 – 1200 – 1200 – 1000 – 1000 – 740 – 1150 – 1200 – 1000 – 1000 – 850 – 850 – 740 – 740 – 650 – 650 – 590 – 540 – 770 – 640 – 550 – 480 – 450 – 380 – 360 – 360 – 350 – 310 – 420 – 350 – 290 – 250
Rights reserved to amend design data without prior notification.
01.10
* for 2-inch transport pitches. Samples and pre-production needs 1 packing unit minimum.
H16.5 H18.5 N O 2200 2000 1500 1200 900 2200 2000 1600 1300 1300 1100 1000 1000 800 700 700 600 600 500 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
REEL P 360 P 500 H16.5 H18.5 H16.5 H18.5 F I H J 2500 – 2300 – 1800 – 1500 – 1200 – 2500 – 2300 – 2000 – 1500 – 1500 – 1400 – 1200 – 1200 – 1000 – 1000 – 950 – 800 – 800 – 700 – 2500 4400 2200 4300 1700 3200 1500 2900 1300 2500 1000 2200 900 1800 1100 2200 900 1600 900 1600 900 1600 700 1300 700 1300 550 1100 550 1100 400 800 600 1200 600 1200 500 1000 500 1000 450 900 450 900 400 800 400 800 350 700 350 700 300 650 300 600 – 800 – 700 – 600 – 500 – 480 – 420 – 400 – 400 – 380 – 350 – 460/340* – 380/280* – 300 – 270
143
D
WIMA Part Number System
A WIMA part number consists of 18 digits and is composed as follows: Field 1 - 4: Type description Field 5 - 6: Rated voltage Field 7 - 10: Capacitance Field 11 - 12: Size and PCM Field 13 - 14: Special features (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17 - 18: Lead length (untaped) 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
M
K
S
2
C
0
2
1
0
0
1
A
0
0
M
S
S
D
20 %
bulk
Type description: SMD-PET = SMD-PEN = SMD-PPS = FKP 02 = MKS 02 = FKS 2 = FKM 2 = FKP 2 = MKS 2 = MKP 2 = MKI 2 = FKS 3 = FKM 3 = FKP 3 = MKS 4 = MKM 4 = MKP 4 = MKP 10 = FKP 4 = FKP 1 = MKP-X2 = MKP-X2 R = MKP-Y2 = MP 3-X2 = MP 3-X1 = MP 3-Y2 = MP 3R-Y2 = Snubber MKP = Snubber FKP = GTO MKP = DC-LINK MKP 4 = DC-LINK MKP C = DC-LINK HC = SuperCap C = SuperCap MC = SuperCap R = SuperCap MR =
63 VDC
SMDT SMDN SMDI FKP0 MKS0 FKS2 FKM2 FKP2 MKS2 MKP2 MKI2 FKS3 FKM3 FKP3 MKS4 MKM4 MKP4 MKP1 FKP4 FKP1 MKX2 MKXR MKY2 MPX2 MPX1 MPY2 MPRY SNMP SNFP GTOM DCP4 DCPC DCH_ SCSC SCMC SCSR SCMR
Rated voltage: 16 VDC = A0 2.5 VDC = A1 4 VDC = A2 14 VDC = A3 28 VDC = A4 40 VDC = A5 5 VDC = A6 50 VDC = B0 63 VDC = C0 100 VDC = D0 160 VDC = E0 250 VDC = F0 400 VDC = G0 450 VDC = H0 600 VDC = I0 630 VDC = J0 700 VDC = K0 800 VDC = L0 850 VDC = M0 900 VDC = N0 1000 VDC = O1 1100 VDC = P0 1200 VDC = Q0 1250 VDC = R0 1500 VDC = S0 1600 VDC = T0 2000 VDC = U0 2500 VDC = V0 3000 VDC = W0 4000 VDC = X0 6000 VDC = Y0 250 VAC = 0W 275 VAC = 1W 300 VAC = 2W 400 VAC = 3W 440 VAC = 4W 500 VAC = 5W ...
0.01 mF
Capacitance: 22 pF = 0022 47 pF = 0047 100 pF = 0100 150 pF = 0150 220 pF = 0220 330 pF = 0330 470 pF = 0470 680 pF = 0680 1000 pF = 1100 1500 pF = 1150 2200 pF = 1220 3300 pF = 1330 4700 pF = 1470 6800 pF = 1680 0.01 mF = 2100 0.022 mF = 2220 0.047 mF = 2470 0.1 mF = 3100 0.22 mF = 3220 0.47 mF = 3470 = 4100 1 mF 2.2 mF = 4220 4.7 mF = 4470 = 5100 10 mF = 5220 22 mF = 5470 47 mF 100 mF = 6100 220 mF = 6220 1F = A010 2.5 F = A025 50 F = A500 100 F = B100 110 F = B110 600 F = B600 1200 F = C120 ...
-
2.5 x 6.5 x 7.2
Size: 4.8 x 3.3 x 3 Size 1812 4.8 x 3.3 x 4 Size 1812 5.7 x 5.1 x 3.5 Size 2220 5.7 x 5.1 x 4.5 Size 2220 7.2 x 6.1 x 3 Size 2824 7.2 x 6.1 x 5 Size 2824 10.2 x 7.6 x 5 Size 4030 12.7 x 10.2 x 6 Size 5040 15.3 x 13.7 x 7 Size 6054 2.5 x 7 x 4.6 PCM 2.5 3 x 7.5 x 4.6 PCM 2.5 2.5 x 6.5 x 7.2 PCM 5 3 x 7.5 x 7.2 PCM 5 2.5 x 7 x 10 PCM 7.5 3 x 8.5 x 10 PCM 7.5 3 x 9 x 13 PCM 10 4 x 9 x 13 PCM 10 5 x 11 x 18 PCM 15 6 x 12.5 x 18 PCM 15 5 x 14 x 26.5 PCM 22.5 6 x 15 x 26.5 PCM 22.5 9 x 19 x 31.5 PCM 27.5 11 x21 x 31.5 PCM 27.5 9 x 19 x 41.5 PCM 37.5 11 x 22 x 41.5 PCM 37.5 94 x 49 x 182 DCH_ 94 x 77 x 182 DCH_ ... Special features: Standard = 00 Version A1 = 1A Version A1.1.1 = 1B Version A1.2 = 1C ...
= = = = = = = = = = = = = = = = = = = = = = = = = = =
X1 X2 Y1 Y2 T1 T2 K1 V1 Q1 0B 0C 1A 1B 2A 2B 3A 3C 4B 4C 5A 5B 6A 6B 7A 7B H0 H1
Tolerance: 20 % = 10 % = 5 % = 2.5 % = 1 % = ...
6 -2
M K J H E
Packing: AMMO H16.5 340 x 340 AMMO H16.5 490 x 370 AMMO H18.5 340 x 340 AMMO H18.5 490 x 370 REEL H16.5 360 REEL H16.5 500 REEL H18.5 360 REEL H18.5 500 ROLL H16.5 ROLL H18.5 BLISTER W12 180 BLISTER W12 330 BLISTER W16 330 BLISTER W24 330 Bulk Mini Bulk Standard Bulk Maxi TPS Mini TPS Standard ...
A B C D F H I J N O P Q R T M S G X Y
Lead length (untaped) 3.5 ±0.5 = C9 6 -2 = SD 16 -1 = P4 ...
The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range.
138
= = = = = = = = = = = = = = = = = = =
01.10
MKS 2
WIMA MP 3-X2 Metallized Paper (MP) RFI-Capacitors Class X2 PCM 10 mm to 27.5 mm Special Features
Electrical Data
˜ Particularly high reliability against active and passive flammability ˜ Excellent self-healing as well as high voltage strength ˜ High degree of interference suppression due to good attenuation and low ESR ˜ For temperatures up to +110° C ˜ According to RoHS 2002/95/EC
Typical Applications Class X2 RFI applications to meet EMC regulations ˜ Capacitors connected to the mains between phase and neutral or phase and phase conductors ˜ Installation category II in accordance with IEC 60664, pulse peak voltage T 2.5 kV
Construction Dielectric: Paper, epoxy resin impregnated Capacitor electrodes: Vacuum-deposited Internal construction:
Capacitance range: 1000 pF to 1.0 mF (E12-values on request) Rated voltages: 250 VAC, 275 VAC Continuous DC voltage* (general guide): 630 V Capacitance tolerances: ±20% Operating temperature range: –40) C to +110) C Climatic test category: 40/110/56/C in accordance with IEC Insulation resistance at +20+ C: C T 0.33 mF: 12 x 10 3 M¸ C 0.33 mF: 4000 sec (M¸ x mF) Measuring voltage: 100 V/1 min. Dissipation factors: tan d T 13 x 10 –3 at 1 kHz and +20+ C Test specifications: In accordance with DIN EN 60384-14 Approvals:
Maximum pulse rise time: Capacitance pF/mF
1000 1100 1500 1100 2200 ... 4700 500 6800 ... 0.022 300 0.033 ... 0.047 200 0.068 ... 1.0 100
for pulses equal to a voltage amplitude with 2 x UAC = 390 V according to IEC 60384-14 Test voltage: 2700 VDC, 2 sec. Reliability: Operational life 300 000 hours Failure rate 1 fit (0.5 x U r and 40) C)
Country Authority Specification Symbol Germany VDE USA Canada
V DIN EN 132 400 D E IEC 60384-14/2 EN 132 400
UL CSA
Pulse rise time V/msec max. operation
UL 1283 C 22.2 No. 8
Approval-No. Approval-No. 250 VAC 275 VAC 89749
89749
E 100438
E 100438
LR 93312-1
LR 93312-1
Capacitor paper Vacuum-deposited electrode Metal contact layer (schoopage) Terminating wire
Encapsulation: Self-extinguishing epoxy resin, UL 94 V-0, metal foil Terminations: Tinned wire. Marking: Marking: Black on Silver.
Mounting Recommendation To minimize or avoid shock and/or vibration stresses to terminating wires and solder connections we recommend to fix voluminous resin-potted MP capacitors as from e.g. PCM 22.5 mm in an appropriate way since for constructional reasons they do not sit tight on the board.
Packing Available taped and reeled up to and including PCM 22.5 mm. Detailed taping information and graphs at the end of the catalogue. For further details and graphs please refer to Technical Information.
* If safety-approved EMI suppression capacitors are operated with a DC voltage being above the specified AC voltage rating the given approvals are no longer valid (DIN EN 60384-14). Furthermore the permissible pulse rise time du/dt (F max.) will be subject to a reduction according to
if the DC operating voltage UDC is higher than 2 x UAC
92
01.10
Fmax. = F r x 2 x UAC / UDC
D
WIMA MP 3-X2 Continuation
General Data Capacitance
W
H
1000 pF
4
8.5
1500 „
4
2200 „ 3300 „
L
250 VAC * PCM**
275 VAC * PCM**
Part number
W
H
L
13.5 10
MPX20W1100FA00_ _ _ _
4
8.5
13.5 10
MPX21W1100FA00_ _ _ _
Part number
8.5
13.5 10
MPX20W1150FA00_ _ _ _
4
8.5
13.5 10
MPX21W1150FA00_ _ _ _
4
8.5
13.5 10
MPX20W1220FA00_ _ _ _
4
8.5
13.5 10
MPX21W1220FA00_ _ _ _
4
8.5
13.5 10
MPX20W1330FA00_ _ _ _
4
8.5
13.5 10
MPX21W1330FA00_ _ _ _
4700 „
5
10
13.5 10
MPX20W1470FB00_ _ _ _
5
10
13.5 10
MPX21W1470FB00_ _ _ _
6800 „
5
13
19
15
MPX20W1680FC00_ _ _ _
5
13
19
15
MPX21W1680FC00_ _ _ _
0.01 mF
5
13
19
15
MPX20W2100FC00_ _ _ _
5
13
19
15
MPX21W2100FC00_ _ _ _
0.015 „
5
13
19
15
MPX20W2150FC00_ _ _ _
5
13
19
15
MPX21W2150FC00_ _ _ _
0.022 „
5
13
19
15
MPX20W2220FC00_ _ _ _
5
13
19
15
MPX21W2220FC00_ _ _ _
0.033 „
6
14
19
15
MPX20W2330FD00_ _ _ _
6
14
19
15
MPX21W2330FD00_ _ _ _
0.047 „
7
15
19
15
MPX20W2470FE00_ _ _ _
7
15
19
15
MPX21W2470FE00_ _ _ _
0.068 „
8
17
19
15
MPX20W2168FF00_ _ _ _
8
17
19
15
MPX21W2680FF00_ _ _ _
0.1 mF
10
18
19
15
MPX20W3100FG00_ _ _ _
10
18
19
15
MPX21W3100FG00_ _ _ _
8
20
28
22.5
MPX20W3100FH00_ _ _ _
8
20
28
22.5
MPX21W3100FH00_ _ _ _
0.15 „
8
20
28
22.5
MPX20W3150FH00_ _ _ _
8
20
28
22.5
MPX21W3150FH00_ _ _ _
0.22 „
10
22
28
22.5
MPX20W3220FI00_ _ _ _
10
22
28
22.5
MPX21W3220FI00_ _ _ _
0.33 „
12
24
28
22.5
MPX20W3330FJ00_ _ _ _
12
24
28
22.5
MPX21W3330FJ00_ _ _ _
0.47 „
13
25
33
27.5
MPX20W3470FK00_ _ _ _
13
25
33
27.5
MPX21W3470FK00_ _ _ _
0.68 „
15
26
33
27.5
MPX20W3680FL00_ _ _ _
15
26
33
27.5
MPX21W3690FL00_ _ _ _
1.0 mF
20
32
33
27.5
MPX20W4100FM00_ _ _ _
20
32
33
27.5
MPX21W4100FM00_ _ _ _
* f = 50/60 Hz ** PCM = Printed circuit module = lead spacing
Part number completion:
Upon request with long leads 35-2 mm max.
Tolerance: 20 % = M Packing: bulk = S Lead length: 6-2 = SD
Dims. in mm.
Taped version see page 140.
W
L
Z
H
1
-10 -00 22 -pF 00 -- - 6 47 8 pF 0. 00 00 -01 pF p PC 0 F .0 -µF M 22 0. 10 µF -04 7 0. µF 1 PC M µF 15
7 5 3
6 -2
d
PCM at the lead exit points ( 0.5)
0.1 7 5 3
0.01
0.1
3
5 7
1
3
5 7 10
3
5 7 100
f/MHz
1000
Impedance change with frequency (general guide)
01.10
Rights reserved to amend design data without prior notification.
.5 22 M PC 5 -27 µF 15 33 CM 0. 22 P 0. -- F 0. µ 0.47 ---- 1.0 --
d = 0.6 P if PCM 10 d = 0.8 P if PCM U 15
10
93
D
Recommendation for Processing and Application of Through-Hole Capacitors
Soldering Process
Wave soldering T
A preheating of through-hole WIMA capacitors is allowed for temperatures T max P 100 ° C. In practice a preheating duration of t P 5 min. has been proven to be best.
260 240 220 200 180 160 140 120 100 80 60 40 20
Single wave soldering Soldering bath temperature: T P 260 ° C Immersion time: t P 5 sec Double wave soldering Soldering bath temperature: T P 260 ° C Immersion time: 2 x t P 3 sec Due to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only.
10 s
[°C] see detailenlargement
2s
3s
t 30
60
90
120
150
180
210
240 [sec]
Typical temperature/time graph for double wave soldering
WIMA Quality and Environmental Philosophy ISO 9001:2000 Certification ISO 9001:2000 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:2000 of our factories by the VDE inspectorate certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards.
WIMA WPCS The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application of WPCS during production process:
All WIMA capacitors, irrespective of whether through-hole devices or SMD, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. – – – – –
Lead PCB CFC Hydrocarbon chloride Chromium 6+
– – – – –
PBB/PBDE Arsenic Cadmium Mercury etc.
RoHS Compliance According to the RoHS Directive 2002/95/EC certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, 2006. For the sake of the environment WIMA has refraind from using such substances since years already.
We merely use pure, recyclable materials for packing our components, such as: ” carton ” cardboard ” adhesive tape made of paper ” polystyrene We almost completely refrain from using packing materials such as: ” foamed polystyrene (Styropor®) ” adhesive tapes made of plastic ” metal clips
Tape for lead-free WIMA capacitors
DIN EN ISO 14001:2005 WIMA’s environmental management has been established in accordance with the guidelines of DIN EN ISO 14001:2005. The certification has been granted in June 2006.
01.10
” incoming material inspection ” metallization ” film inspection ” schoopage ” pre-healing ” lead attachment ” cast resin preparation/ encapsulation ” 100% final inspection ” AQL check
WIMA Environmental Policy
16
D
Typical Dimensions for Taping Configuration Vh
P
P2
Diagram 1: PCM 2.5/5/7.5mm
W
W1
W0
H
H1
W2
P1
D0 d P
t
F P0
H1
P
P1
H
P1
d
d F
P0 P2
Diagram 2: PCM 10/15 mm
Diagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components
Designation Carrier tape width
Dimensions for Radial Taping
Symbol PCM 2.5 taping W
P0
P2
F
18.0 p0.5
PCM 5 taping
PCM 7.5 taping
PCM 10 taping*
PCM 15 taping*
PCM 22.5 taping
PCM 27.5 taping
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
18.0 p0.5
for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing Hold-down tape width W0 6.0 6.0 12.0 12.0 12.0 12.0 12.0 adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape Hole position
W 1
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
9.0 p0.5
Hold-down tape position
W 2
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
0.5 to 3.0 max.
Feed hole diameter
D 0
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
4.0 p0.2
12.7 p1.0
12.7 p1.0
12.7 p1.0
25.4 p1.0
25.4 p1.0
38.1 p1.5
4.0 p0.2 3*8.1 p1.5 or 50.8 p1.5
Pitch of component P Feed hole pitch P 0
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
12.7 p0.3
cumulative pitch error max. 1.0 mm/20 pitch
Feed hole centre to lead
P 1
5.1 p0.5
3.85 p0.7
2.6 p0.7
7.7 p0.7
5.2 p0.7
7.8 p0.7
5.3 p0.7
Hole centre to component centre
P 2
6.35 p1.3
6.35 p1.3
6.35 p1.3
12.7 p1.3
12.7 p1.3
19.05 p1.3
19.05 p1.3
Feed hole centre to bottom H edge of the component
16.5 p0.3 18.5 p0.5
16.5 p0.3 18.5 p0.5
16.5 p0.5 18.5 p0.5
16.5 p0.5 18.5 p0.5
16.5 p0.5 18.5 p0.5
16.5 p0.5 18.5 p0.5
16.5 p0.5 18.5 p0.5
Feed hole centre to top H edge of the component 1
H+Hcomponent < H1 32.25 max.
H+Hcomponent < H1 32.25 max.
H+Hcomponent < H1 24.5 to 31.5
H+Hcomponent < H1 25.0 to 31.5
H+Hcomponent < H1 26.0 to 37.0
H+Hcomponent < H1 30.0 to 43.0
H+Hcomponent < H1 35.0 to 45.0
7.5 p0.8
10.0 p0.8
15 p0.8
22.5 p0.8
27.5 p0.8
Lead spacing at +0.8 F 2.5 p0.5 5.0 upper edge of carrier tape –0.2
+0.08
Dh
p 2.0 max.
p 2.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
0.7 p0.2
ROLL/AMMO Package (see also page 141) P 360 max. 52 p2 depending on REEL P 30 p1 B 58 p2 comp. dimensions Unit
0.8
+0,08 –0.05
Component alignment
t
0.8
+0,08 –0.05
0.4 p0.05
„
0.5
+0,06 p0.05 or 0.6 –0.05
d
„
0.5
+0.06 p0.05 or 0.6 –0.05
Lead diameter Total tape thickness
0.5 p0.05
0.8 –0.05
AMMO 52 p2 54 p2 max. P 500 max. B 58 p2 or REEL B 60 p2 REEL PP 360 30 p1 P 25 p1 66 p2 68 p2
depending on PCM and component dimensions
see details page 143.
Dims in mm. * PCM 10 and PCM 15 can be crimped to PCM 7.5. Position of components according to PCM 7.5 (sketch 1). P 0 = 12.7 or 15.0 is possible
140
Please clarify customer-specific deviations with the manufacturer.
01.10
„ Diameter of leads see General Data.
D
Size
PCM
2.5 mm
5 mm
7.5 mm
10 mm
15 mm
22.5 mm
27.5 mm
37.5 mm
142
W 2.5 3 3.8 4.6 5.5 2.5 3 3.5 4.5 4.5 5 5.5 5.5 6.5 7.2 7.2 8.5 8.5 11 2.5 3 4 4.5 5 5.7 7.2 3 4 4 4 5 5 6 6 8 5 5 6 6 7 7 8 8 9 9 10 11 5 6 7 8 8.5 10 10.5 10.5 11 12 9 11 13 13 15 15 17 17 20 20 9 11 13 15 17 19 20 24
H 7 7.5 8.5 9 10 6.5 7.5 8.5 6 9.5 10 7 11.5 8 8.5 13 10 14 16 7 8.5 9 9.5 10.5 12.5 12.5 9 8.5 9 9.5 10 11 12 12.5 12 11 13 12.5 14 14 15 15 17 14 16 18 14 14 15 16.5 20 18.5 22 19 20.5 21 24 19 21 24 25 26 26 29 34.5 32 39.5 19 22 24 26 29 32 39.5 45.5
L 4.6 4.6 4.6 4.6 4.6 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 10 10 10 10.3 10.3 10.3 10.3 13 13.5 13 13 13.5 13 13 13 13 18 19 18 19 18 19 18 19 18 18 19 18 26.5 26.5 26.5 28 26.5 28 26.5 26.5 26.5 28 31.5 31.5 31.5 33 31.5 33 31.5 31.5 33 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5
Codes 0B 0C 0D 0E 0F 1A 1B 1C 1D 1E 1F 1G 1H 1I 1J 1K 1L 1M 1N 2A 2B 2C 2D 2E 2F 2G 3A FA 3C 3D FB 3F 3G 3H 3I 4B FC 4C FD 4D FE 4H FF 4F 4J FG 4M 5A 5B 5D FH 5F FI 5G 5H 5I FJ 6A 6B 6D FK 6F FL 6G 6I FM 6J 7A 7B 7C 7D 7E 7F 7G 7H
pcs. per packaging unit bulk Mini Standard Maxi M S G 1000 5000 10 000 1000 5000 10 000 1000 5000 10 000 1000 5000 10 000 1000 5000 10 000 2000 5000 10 000 1000 5000 – 1000 5000 – 1000 6000 – 1000 4000 – 1000 3500 – 1000 4000 – 500 2500 – 1000 2500 – 500 2500 – 500 2000 – 500 2000 – 500 1500 – 250 1000 – 1000 5000 – 1000 5000 – 1000 4000 – 1000 3500 – 1000 3000 – 2000 – 500 500 1500 – 1000 3000 – 3000 – 500 1000 3000 – 1000 3000 – 500 2000 – 1000 3000 – 2400 – 800 800 2400 – 500 2000 – 800 2400 – 200 1000 2000 – 500 250 1000 400 1600 – 250 1000 1200 – 400 100 500 1200 – 400 300 900 – 100 500 – 300 1000 – 300 1200 – 250 1000 – – 190 760 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Rights reserved to amend design data without prior notification. Samples and pre-production needs on request.
Moulded versions.
pcs. per packaging unit/TPS* Mini Standard X Y – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 115 690 220 880 90 540 170 680 170 680 170 680 75 450 160 640 136 544 112 448 56 336 96 384 48 288 88 176 88 176 36 216 36 144 60 480 51 408 84 252 72 144 66 132 54 108 27 108 21 84 * Tray-Packing-System
01.10
Packing Quantities for Bulk Capacitors and TPS*
D
Packing Units for Taped Capacitors with Radial Leads ROLL Size
PCM
2.5 mm
5 mm
7.5 mm
10 mm
15 mm
22.5 mm
27.5 mm
W 2.5 3 3.8 4.6 5.5 2.5 3 3.5 4.5 4.5 5 5.5 5.5 6.5 7.2 7.2 8.5 8.5 11 2.5 3 4 4.5 5 5.7 7.2 3 4 4 4 5 5 6 6 8 5 5 6 6 7 7 8 8 9 9 10 11 5 6 7 8 8.5 10 10.5 10.5 11 12 9 11 13 15
H 7 7.5 8.5 9 10 6.5 7.5 8.5 6 9.5 10 7 11.5 8 8.5 13 10 14 16 7 8.5 9 9.5 10.5 12.5 12.5 9 8.5 9 9.5 10 11 12 12.5 12 11 13 12.5 14 14 15 15 17 14 16 18 14 14 15 16.5 20 18.5 22 19 20.5 21 24 19 21 24 26
L 4.6 4.6 4.6 4.6 4.6 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 10 10 10 10.3 10.3 10.3 10.3 13 13.5 13 13 13.5 13 13 13 13 18 19 18 19 18 19 18 19 18 18 19 18 26.5 26.5 26.5 28 26.5 28 26.5 26.5 26.5 28 31.5 31.5 31.5 31.5
Codes 0B 0C 0D 0E 0F 1A 1B 1C 1D 1E 1F 1G 1H 1I 1J 1K 1L 1M 1N 2A 2B 2C 2D 2E 2F 2G 3A FA 3C 3D FB 3F 3G 3H 3I 4B FC 4C FD 4D FE 4H FF 4F 4J FG 4M 5A 5B 5D FH 5F FI 5G 5H 5I FJ 6A 6B 6D 6F
Moulded versions.
AMMO 340 x 340 490 x 370 H16.5 H18.5 H16.5 H18.5 A C B D 2800 – 2300 – 1800 – 1500 – 1200 – 2800 – 2300 – 2000 – 1500 – 1500 – 1400 – 1200 – 1200 – 1000 – 1000 – 1000 – 800 – 800 – 700 – 2500 – 2300 4150 1700 3100 1400 2800 1300 – 1100 – 1000 – – 1900 – 1450 – 1450 – 1400 – 1200 – 1200 – 1000 – 1000 – 740 – 1150 – 1200 – 1000 – 1000 – 850 – 850 – 740 – 740 – 650 – 650 – 590 – 540 – 770 – 640 – 550 – 480 – 450 – 380 – 360 – 360 – 350 – 310 – 420 – 350 – 290 – 250
Rights reserved to amend design data without prior notification.
01.10
* for 2-inch transport pitches. Samples and pre-production needs 1 packing unit minimum.
H16.5 H18.5 N O 2200 2000 1500 1200 900 2200 2000 1600 1300 1300 1100 1000 1000 800 700 700 600 600 500 – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
REEL P 360 P 500 H16.5 H18.5 H16.5 H18.5 F I H J 2500 – 2300 – 1800 – 1500 – 1200 – 2500 – 2300 – 2000 – 1500 – 1500 – 1400 – 1200 – 1200 – 1000 – 1000 – 950 – 800 – 800 – 700 – 2500 4400 2200 4300 1700 3200 1500 2900 1300 2500 1000 2200 900 1800 1100 2200 900 1600 900 1600 900 1600 700 1300 700 1300 550 1100 550 1100 400 800 600 1200 600 1200 500 1000 500 1000 450 900 450 900 400 800 400 800 350 700 350 700 300 650 300 600 – 800 – 700 – 600 – 500 – 480 – 420 – 400 – 400 – 380 – 350 – 460/340* – 380/280* – 300 – 270
143
D
WIMA Part Number System
A WIMA part number consists of 18 digits and is composed as follows: Field 1 - 4: Type description Field 5 - 6: Rated voltage Field 7 - 10: Capacitance Field 11 - 12: Size and PCM Field 13 - 14: Special features (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17 - 18: Lead length (untaped) 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
M
K
S
2
C
0
2
1
0
0
1
A
0
0
M
S
S
D
20 %
bulk
Type description: SMD-PET = SMD-PEN = SMD-PPS = FKP 02 = MKS 02 = FKS 2 = FKM 2 = FKP 2 = MKS 2 = MKP 2 = MKI 2 = FKS 3 = FKM 3 = FKP 3 = MKS 4 = MKM 4 = MKP 4 = MKP 10 = FKP 4 = FKP 1 = MKP-X2 = MKP-X2 R = MKP-Y2 = MP 3-X2 = MP 3-X1 = MP 3-Y2 = MP 3R-Y2 = Snubber MKP = Snubber FKP = GTO MKP = DC-LINK MKP 4 = DC-LINK MKP C = DC-LINK HC = SuperCap C = SuperCap MC = SuperCap R = SuperCap MR =
63 VDC
SMDT SMDN SMDI FKP0 MKS0 FKS2 FKM2 FKP2 MKS2 MKP2 MKI2 FKS3 FKM3 FKP3 MKS4 MKM4 MKP4 MKP1 FKP4 FKP1 MKX2 MKXR MKY2 MPX2 MPX1 MPY2 MPRY SNMP SNFP GTOM DCP4 DCPC DCH_ SCSC SCMC SCSR SCMR
Rated voltage: 16 VDC = A0 2.5 VDC = A1 4 VDC = A2 14 VDC = A3 28 VDC = A4 40 VDC = A5 5 VDC = A6 50 VDC = B0 63 VDC = C0 100 VDC = D0 160 VDC = E0 250 VDC = F0 400 VDC = G0 450 VDC = H0 600 VDC = I0 630 VDC = J0 700 VDC = K0 800 VDC = L0 850 VDC = M0 900 VDC = N0 1000 VDC = O1 1100 VDC = P0 1200 VDC = Q0 1250 VDC = R0 1500 VDC = S0 1600 VDC = T0 2000 VDC = U0 2500 VDC = V0 3000 VDC = W0 4000 VDC = X0 6000 VDC = Y0 250 VAC = 0W 275 VAC = 1W 300 VAC = 2W 400 VAC = 3W 440 VAC = 4W 500 VAC = 5W ...
0.01 mF
Capacitance: 22 pF = 0022 47 pF = 0047 100 pF = 0100 150 pF = 0150 220 pF = 0220 330 pF = 0330 470 pF = 0470 680 pF = 0680 1000 pF = 1100 1500 pF = 1150 2200 pF = 1220 3300 pF = 1330 4700 pF = 1470 6800 pF = 1680 0.01 mF = 2100 0.022 mF = 2220 0.047 mF = 2470 0.1 mF = 3100 0.22 mF = 3220 0.47 mF = 3470 = 4100 1 mF 2.2 mF = 4220 4.7 mF = 4470 = 5100 10 mF = 5220 22 mF = 5470 47 mF 100 mF = 6100 220 mF = 6220 1F = A010 2.5 F = A025 50 F = A500 100 F = B100 110 F = B110 600 F = B600 1200 F = C120 ...
-
2.5 x 6.5 x 7.2
Size: 4.8 x 3.3 x 3 Size 1812 4.8 x 3.3 x 4 Size 1812 5.7 x 5.1 x 3.5 Size 2220 5.7 x 5.1 x 4.5 Size 2220 7.2 x 6.1 x 3 Size 2824 7.2 x 6.1 x 5 Size 2824 10.2 x 7.6 x 5 Size 4030 12.7 x 10.2 x 6 Size 5040 15.3 x 13.7 x 7 Size 6054 2.5 x 7 x 4.6 PCM 2.5 3 x 7.5 x 4.6 PCM 2.5 2.5 x 6.5 x 7.2 PCM 5 3 x 7.5 x 7.2 PCM 5 2.5 x 7 x 10 PCM 7.5 3 x 8.5 x 10 PCM 7.5 3 x 9 x 13 PCM 10 4 x 9 x 13 PCM 10 5 x 11 x 18 PCM 15 6 x 12.5 x 18 PCM 15 5 x 14 x 26.5 PCM 22.5 6 x 15 x 26.5 PCM 22.5 9 x 19 x 31.5 PCM 27.5 11 x21 x 31.5 PCM 27.5 9 x 19 x 41.5 PCM 37.5 11 x 22 x 41.5 PCM 37.5 94 x 49 x 182 DCH_ 94 x 77 x 182 DCH_ ... Special features: Standard = 00 Version A1 = 1A Version A1.1.1 = 1B Version A1.2 = 1C ...
= = = = = = = = = = = = = = = = = = = = = = = = = = =
X1 X2 Y1 Y2 T1 T2 K1 V1 Q1 0B 0C 1A 1B 2A 2B 3A 3C 4B 4C 5A 5B 6A 6B 7A 7B H0 H1
Tolerance: 20 % = 10 % = 5 % = 2.5 % = 1 % = ...
6 -2
M K J H E
Packing: AMMO H16.5 340 x 340 AMMO H16.5 490 x 370 AMMO H18.5 340 x 340 AMMO H18.5 490 x 370 REEL H16.5 360 REEL H16.5 500 REEL H18.5 360 REEL H18.5 500 ROLL H16.5 ROLL H18.5 BLISTER W12 180 BLISTER W12 330 BLISTER W16 330 BLISTER W24 330 Bulk Mini Bulk Standard Bulk Maxi TPS Mini TPS Standard ...
A B C D F H I J N O P Q R T M S G X Y
Lead length (untaped) 3.5 ±0.5 = C9 6 -2 = SD 16 -1 = P4 ...
The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range.
138
= = = = = = = = = = = = = = = = = = =
01.10
MKS 2
