WP9S-LED - Kim Lighting
WP9S-LED
WARP9® Small PicoEmitter® LED
kl_wp9seled_spec.pdf JOB
TYPE
NOTES
APPROVALS
FEATURES
Certifications
■ F ull Cutoff PicoEmitter technology ■ Patented low profile luminaire1 ■ Available in 580nm, 3000K, 4000K and 5000K
T ype 1, 2, 3, 4, 5, R, L distributions ■ 0 -10V dimming drivers standard ■ Sealed optical chamber, IP66 certified ■
standard CCT
3000K and warmer CCTs only
SPECIFICATIONS 8I"
15"
(227 mm)
(381 mm)
26I"
1"
(684 mm)
4B"
(25 mm)
1K"
(105 mm)
4G"
Side
(38 mm)
(113 mm)
5N"
Front
(141 mm)
Top
Bottom
Max. Weight = 30 lbs. EPA .52 for 1SA. See Configuration for Additional EPAs.
ORDERING CODE
Configuration
EPA
1SA 1 Arm Side Mt. 2SB 2 Arm Side Mt. 2SL 2 Arm Side Mt. 3ST 3 Arm Side Mt. 3SY* 3 Arm Side Mt. 4SC 4 Arm Side Mt. 1W Single Wall Mt. HSF Horizontal
.52 1.0
Fixture Housing
WP9S Small,
.82
60 LEDs
1.3 1.3 1.5 n/a n/a
Distribution 1 Type I
2 3 4 5 R L
Type II
Electrical Module Drive Current
E35 350mA
PicoEmitter
Source 60L 60 LEDs, 66W
Type III Type IV
Color Temperature2 2K3 580nm 3K 3000K 4K 4000K 5K 5000K
Type V Type R, Right
Fixture Finish
BL Black DB Dark Bronze GT Graphite LG Light Gray PS Platinum Silver TT Titanium WH White CC** Custom Color **Consult representative
Voltages 120 120V
208 208V 240 240V 277 277V 3474 347V 4804 480V
Type L, Left
Slipfitter
*Available round poles only. EPA is for Fixture only
Fuse Options
Lens Options
SF 120, 277, 347 Line Volts DF 208, 240, 480 Line Volts
LS Polycarbonate Lens 5
NFO Option
NFO# Neighbor
Friendly Optic
TL Tamper Resistant Latch
Wireless
WIR-RMI-IO 120 - 347V 1000
# Photometry
available for Type III/IV. All others, consult factory.
SWP6,7,8 SWPM6,7,8,9
SiteSync Lighting Control is available from our most popular brands in a broad range of award-winning product families. For Pole Spec Select: http://www.kimlighting.com/products/arms_and_poles/ For Control Spec Select: http://trpssl.com/index.html Kim Lighting reserves the right to change specifications without notice.
1 2 3 4 5
Foot Range WiScape RF mesh control system with off/on/dim, motion, photo, GPS location, alert, monitoring and metering capabilities. SiteSync Wireless Pre-Commission SiteSync Wireless Pre-Commission w/ Occupancy Sensor
Catalog Number
© 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017
Motion
SCL-R Round Pole
SWUSB‡ SiteSync loaded
Mounted on USB flash Occupancy drive (Windows® Sensor up to 16' operating system only) SCL-S Square Pole Mounted SWTAB‡ SiteSync Windows® Occupancy based Tablet Sensor up to 16' ‡ SWBRG SiteSync Wireless Round Pole SCH-R Bridge Node Mounted ‡ When ordering with SiteSync, one Occupancy of the following interface options Sensor 16' to 30' must be chosen and ordered separately. Each option contains the SiteSync License, GUI and Bridge Node.
US Patent No. D568,521 S. Other patents pending. For custom optics and color temperature configurations, contact factory. Turtle friendly. Maximum 500mA drive current for 2K amber option. 347V & 480V currents may be supplied with step-down transformer. Use only when vandalism is anticipated to be high. Required only for vandal protection in locations where fixtures can be reached by unauthorized persons.
7-pin Photocell Receptacle 120V Button Photocell 208V Button Photocell 240V Button Photocell 277V Button Photocell 480V Button Photocell 347V Button Photocell
† Not compatable with SiteSync
Mounting Options
Control Optionss
Other Options
Photocell Options
A25-7† A30 A31 A32 A33 A34 A354
SCH-S Square Pole
Mounted Occupancy Sensor 16' to 30'
6 7
8
9
VSF Vertical Slipfitter Mount
for 2" pipe tenon, (2-3/8" O.D.) SVSF Vertical Slipfitter Mount square for 2" pipe tenon, (2-3/8" O.D.) Side Arm Mount 3 3" O.D. Pole 3.5 3.5" O.D. Pole 4 4" O.D. Pole 5 5" O.D. Pole 6 6" O.D. Pole SQ Square Pole
SiteSync is not compatable with products using 480V option. Not available with other control or sensor options. PEC is available with MOB and OCS. Specify group and zone. See SiteSync product page www.hubbelllighting.com/controls/sitesync for more details. Specify time delay; dimming level and mounting height.
| 1 |
WP9S-LED
WARP9® Small PicoEmitter® LED
kl_wp9seled_spec.pdf
LUMINAIRE PERFORMANCE Projected Lumen Maintenance
Spectroradiometric 3000K Average
4000K Average
5000K Average
Color Rendering Index (CRI)
≤80
≤80
≤70
Power Factor
>.90
>.90
>.90
mA 350 mA
100,000 hrs
Calculated L70
94.26%
719,000 Hrs.
Electrical Drive Current @ 350mA Volts - AC
Amps - AC
System Watts
120
0.55
66
208
0.32
66
240
0.28
66
277
0.24
66
347
0.19
66
480
0.14
66
B.U.G. Rating for 350mA (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare Temperature
Type I
Type II
Type III
Type III NFO
Type IV
Type IV NFO
Type V
Type L/R
3000K
N/A
B1 U0 G1
B1 U0 G1
N/A
B1 U0 G1
B0 U0 G1
B2 U0 G1
N/A
4000K
N/A
B2 U0 G2
B1 U0 G1
N/A
B1 U0 G2
B1 U0 G1
B3 U0 G1
N/A
5000K
N/A
B2 U0 G2
B1 U0 G2
N/A
B1 U0 G2
B1 U0 G1
B3 U0 G1
N/A
Absolute Lumens for 350mA Temperature
Type I
Type II
Type III
Type III NFO
Type IV
Type IV NFO
Type V
Type L/R
3000K
N/A
4663
4599
N/A
4703
3709
4753
N/A
4000K
N/A
6090
6006
N/A
6142
4844
6208
N/A
5000K
N/A
6477
6387
N/A
6531
5151
6601
N/A
LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library. For custom optics and color temperature configurations, contact factory.
Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017
| 2 |
WP9S-LED
WARP9® Small PicoEmitter® LED
kl_wp9seled_spec.pdf
SPECIFICATIONS Housing: ■■
ne-piece die-cast, low copper (.90
■■
National Electrical Code, ANSI/NFPA 70.
■■
10kV surge suppression.
■■
Thermalshield thermal control.
CAUTION: ■■
Fixture Housing
Purple Dimming Lead (+) 30 mA Max
Support Arm: ■■
ne-piece extruded aluminum with internal O bolt guides and fully radiussed top and bottom.
■■
L uminaire-to-pole attachment is by internal draw bolts, and includes a pole reinforcing plate with wire strain relief.
■■
Arm is circular cut for specified round pole.
■■
ptional cast, low copper aluminum horizontal O slip-fitter with adaptor plate to secure the luminaire to 2” IPS pipe size arms.
■■
Optional cast aluminum wall mount plate assembly. Attaches to the wall over the junction box. Luminaire attaches to the wall plate.
Fixtures must be grounded in accordance with national, state and/or local electrical codes, Failure to do so may result in serious personal injury.
Gray Dimming Lead (-)
Optical Module:
High temperature fuse holders factory installed inside the fixture housing. Fuse is included.
■■
10% to 100% dimming by the use of standard
lear 3/8" thick tempered glass lens retained C by eight steel clips with full silicone gasketing around the perimeter.
■■
■■
Certifications and Listings:
Dimming:
ll hardware is stainless steel or electro-zinc A plated steel.
Lens Frame:
■■
■■
WARRANTY: ■■
F or full warranty see http://www. hubbelllighting.com/resources/warranty
Finish: ■■
Fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat.
■■
S tandard colors include (BL) Black, (DB) Dark Bronze, (GT) Graphite, (WH) White, (PS) Platinum Silver, (LG) Light Gray, (TT) Titanium, and (CC) Custom Color (Include RAL#).
Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017
| 3 |
WP9S-LED
WARP9® Small PicoEmitter® LED
kl_wp9seled_spec.pdf
CONTROLS
Photocell Receptacle
WIR-RMI-IO
A25-7
120 - 347V 1000 Foot Range WiScape RF mesh control system with off/on/dim, motion, photo, GPS location, alert, monitoring and metering capabilities.
Fully gasketed and wired 7-pin receptacle option. Easy access location above the electrical compartment. 7-pin construction allows for a user-defined interface and provides a controlled definition of operational performance. ANSI twist-lock control module by-others. Standard customer operation modes: 1. Traditional on/off photoelectric control. 2. 5-pin wireless photoelectric control for added dimming feature. 3. 7-pin wireless photoelectric control for dimming and additional I/O connections for customer use. Gray Wire 0-10V Dimming
Black Wire Line Voltage
White Wire Neutral
Purple Wire 0-10V Dimming
Brown Wire 10V Customer Defined Red Wire Line Voltage
Orange Wire 10V Customer Defined
Button Photocell A30 for 120V, A31 for 208V, A32 for 240V, A33 for 277V, A35 for 347V, A34 for 480V, Photocell is factory installed inside the housing with a fully gasketed sensor on the side wall. For multiple fixture mountings, one fixture is supplied with a photocell to operate the others.
Wireless Controls wiSCAPE™ Hubbell Building Automation’s wiSCAPP In-Fixture Module is a bi-directional wireless RF device that allows an individual fixture to be managed, monitored and metered. The wiSCAPE In-Fixture Module communicates wirelessly over a robust 2.4GHz ISM (Industrial, Scientific and Medical) certified meshed radio signal. The wiSCAPE Fixture Module drastically simplifies control and automation of projects, especially in retrofit environments, and challenges the legacy world of wired-systems. wiSCAPE wireless control technology easily adapts to complex automation situations for quick, simple and economical commissioning. The On-Fixture Module is compatible with A-25-7H option.
SiteSync™1 SiteSync™ wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit www.hubbelllighting.com/products/sitesync for more details.
Pole Mounted Round Pole-Mounted Occupancy Sensor up to 16' SCL-R Round Pole-Mounted Occupancy Sensor up to 16’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCL-R41/2772/BL 3
Square Pole-Mounted Occupancy Sensor up to 16' SCL-S Square Pole-Mounted Occupancy Sensor up to 16’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for square pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCL-L/2772/BL 3
Round Pole-Mounted Occupancy Sensor 16’ to 30’ SCH-R Round Pole-Mounted Occupancy Sensor: 16' to 30’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCH-R41/2772/BL 3
Square Pole-Mounted Occupancy Sensor 16’ to 30’ SCH-S Square Pole-Mounted Occupancy Sensor: 16 to 30’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCH-S/2772/BL 3
SCP The SCP is a photo-control with motion sensing accessory thats mounts to the side of any new or existing 3”-5” round or square straight pole. The SCP enables any pole mounted luminaire in excess of 75 watts, to meet California Title 24 requirements with integral 20KV/10KA surge protection for added reliability and serviceability. For more detail: http://www.aal.net/products/sensor_control_ programmable PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www.HubbellLighting.com/products/ sitesync or contact Hubbell Lighting tech support at (800) 345-4928.
1
SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture for selection of the lens. Examples: SiteSync only : WP9L1E35/120L3K120/US/SWP SiteSync with Motion Control: WP9L1E35/120L3K120/US/SWPM
Pole Diameter, 2Voltage, 3Color
1
Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017
| 4 |
WARP9® Small PicoEmitter® LED
kl_wp9seled_spec.pdf JOB
TYPE
NOTES
APPROVALS
FEATURES
Certifications
■ F ull Cutoff PicoEmitter technology ■ Patented low profile luminaire1 ■ Available in 580nm, 3000K, 4000K and 5000K
T ype 1, 2, 3, 4, 5, R, L distributions ■ 0 -10V dimming drivers standard ■ Sealed optical chamber, IP66 certified ■
standard CCT
3000K and warmer CCTs only
SPECIFICATIONS 8I"
15"
(227 mm)
(381 mm)
26I"
1"
(684 mm)
4B"
(25 mm)
1K"
(105 mm)
4G"
Side
(38 mm)
(113 mm)
5N"
Front
(141 mm)
Top
Bottom
Max. Weight = 30 lbs. EPA .52 for 1SA. See Configuration for Additional EPAs.
ORDERING CODE
Configuration
EPA
1SA 1 Arm Side Mt. 2SB 2 Arm Side Mt. 2SL 2 Arm Side Mt. 3ST 3 Arm Side Mt. 3SY* 3 Arm Side Mt. 4SC 4 Arm Side Mt. 1W Single Wall Mt. HSF Horizontal
.52 1.0
Fixture Housing
WP9S Small,
.82
60 LEDs
1.3 1.3 1.5 n/a n/a
Distribution 1 Type I
2 3 4 5 R L
Type II
Electrical Module Drive Current
E35 350mA
PicoEmitter
Source 60L 60 LEDs, 66W
Type III Type IV
Color Temperature2 2K3 580nm 3K 3000K 4K 4000K 5K 5000K
Type V Type R, Right
Fixture Finish
BL Black DB Dark Bronze GT Graphite LG Light Gray PS Platinum Silver TT Titanium WH White CC** Custom Color **Consult representative
Voltages 120 120V
208 208V 240 240V 277 277V 3474 347V 4804 480V
Type L, Left
Slipfitter
*Available round poles only. EPA is for Fixture only
Fuse Options
Lens Options
SF 120, 277, 347 Line Volts DF 208, 240, 480 Line Volts
LS Polycarbonate Lens 5
NFO Option
NFO# Neighbor
Friendly Optic
TL Tamper Resistant Latch
Wireless
WIR-RMI-IO 120 - 347V 1000
# Photometry
available for Type III/IV. All others, consult factory.
SWP6,7,8 SWPM6,7,8,9
SiteSync Lighting Control is available from our most popular brands in a broad range of award-winning product families. For Pole Spec Select: http://www.kimlighting.com/products/arms_and_poles/ For Control Spec Select: http://trpssl.com/index.html Kim Lighting reserves the right to change specifications without notice.
1 2 3 4 5
Foot Range WiScape RF mesh control system with off/on/dim, motion, photo, GPS location, alert, monitoring and metering capabilities. SiteSync Wireless Pre-Commission SiteSync Wireless Pre-Commission w/ Occupancy Sensor
Catalog Number
© 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017
Motion
SCL-R Round Pole
SWUSB‡ SiteSync loaded
Mounted on USB flash Occupancy drive (Windows® Sensor up to 16' operating system only) SCL-S Square Pole Mounted SWTAB‡ SiteSync Windows® Occupancy based Tablet Sensor up to 16' ‡ SWBRG SiteSync Wireless Round Pole SCH-R Bridge Node Mounted ‡ When ordering with SiteSync, one Occupancy of the following interface options Sensor 16' to 30' must be chosen and ordered separately. Each option contains the SiteSync License, GUI and Bridge Node.
US Patent No. D568,521 S. Other patents pending. For custom optics and color temperature configurations, contact factory. Turtle friendly. Maximum 500mA drive current for 2K amber option. 347V & 480V currents may be supplied with step-down transformer. Use only when vandalism is anticipated to be high. Required only for vandal protection in locations where fixtures can be reached by unauthorized persons.
7-pin Photocell Receptacle 120V Button Photocell 208V Button Photocell 240V Button Photocell 277V Button Photocell 480V Button Photocell 347V Button Photocell
† Not compatable with SiteSync
Mounting Options
Control Optionss
Other Options
Photocell Options
A25-7† A30 A31 A32 A33 A34 A354
SCH-S Square Pole
Mounted Occupancy Sensor 16' to 30'
6 7
8
9
VSF Vertical Slipfitter Mount
for 2" pipe tenon, (2-3/8" O.D.) SVSF Vertical Slipfitter Mount square for 2" pipe tenon, (2-3/8" O.D.) Side Arm Mount 3 3" O.D. Pole 3.5 3.5" O.D. Pole 4 4" O.D. Pole 5 5" O.D. Pole 6 6" O.D. Pole SQ Square Pole
SiteSync is not compatable with products using 480V option. Not available with other control or sensor options. PEC is available with MOB and OCS. Specify group and zone. See SiteSync product page www.hubbelllighting.com/controls/sitesync for more details. Specify time delay; dimming level and mounting height.
| 1 |
WP9S-LED
WARP9® Small PicoEmitter® LED
kl_wp9seled_spec.pdf
LUMINAIRE PERFORMANCE Projected Lumen Maintenance
Spectroradiometric 3000K Average
4000K Average
5000K Average
Color Rendering Index (CRI)
≤80
≤80
≤70
Power Factor
>.90
>.90
>.90
mA 350 mA
100,000 hrs
Calculated L70
94.26%
719,000 Hrs.
Electrical Drive Current @ 350mA Volts - AC
Amps - AC
System Watts
120
0.55
66
208
0.32
66
240
0.28
66
277
0.24
66
347
0.19
66
480
0.14
66
B.U.G. Rating for 350mA (TM15) in Lumens where B = Backlight, U = Uplight, G = Glare Temperature
Type I
Type II
Type III
Type III NFO
Type IV
Type IV NFO
Type V
Type L/R
3000K
N/A
B1 U0 G1
B1 U0 G1
N/A
B1 U0 G1
B0 U0 G1
B2 U0 G1
N/A
4000K
N/A
B2 U0 G2
B1 U0 G1
N/A
B1 U0 G2
B1 U0 G1
B3 U0 G1
N/A
5000K
N/A
B2 U0 G2
B1 U0 G2
N/A
B1 U0 G2
B1 U0 G1
B3 U0 G1
N/A
Absolute Lumens for 350mA Temperature
Type I
Type II
Type III
Type III NFO
Type IV
Type IV NFO
Type V
Type L/R
3000K
N/A
4663
4599
N/A
4703
3709
4753
N/A
4000K
N/A
6090
6006
N/A
6142
4844
6208
N/A
5000K
N/A
6477
6387
N/A
6531
5151
6601
N/A
LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library. For custom optics and color temperature configurations, contact factory.
Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017
| 2 |
WP9S-LED
WARP9® Small PicoEmitter® LED
kl_wp9seled_spec.pdf
SPECIFICATIONS Housing: ■■
ne-piece die-cast, low copper (.90
■■
National Electrical Code, ANSI/NFPA 70.
■■
10kV surge suppression.
■■
Thermalshield thermal control.
CAUTION: ■■
Fixture Housing
Purple Dimming Lead (+) 30 mA Max
Support Arm: ■■
ne-piece extruded aluminum with internal O bolt guides and fully radiussed top and bottom.
■■
L uminaire-to-pole attachment is by internal draw bolts, and includes a pole reinforcing plate with wire strain relief.
■■
Arm is circular cut for specified round pole.
■■
ptional cast, low copper aluminum horizontal O slip-fitter with adaptor plate to secure the luminaire to 2” IPS pipe size arms.
■■
Optional cast aluminum wall mount plate assembly. Attaches to the wall over the junction box. Luminaire attaches to the wall plate.
Fixtures must be grounded in accordance with national, state and/or local electrical codes, Failure to do so may result in serious personal injury.
Gray Dimming Lead (-)
Optical Module:
High temperature fuse holders factory installed inside the fixture housing. Fuse is included.
■■
10% to 100% dimming by the use of standard
lear 3/8" thick tempered glass lens retained C by eight steel clips with full silicone gasketing around the perimeter.
■■
■■
Certifications and Listings:
Dimming:
ll hardware is stainless steel or electro-zinc A plated steel.
Lens Frame:
■■
■■
WARRANTY: ■■
F or full warranty see http://www. hubbelllighting.com/resources/warranty
Finish: ■■
Fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat.
■■
S tandard colors include (BL) Black, (DB) Dark Bronze, (GT) Graphite, (WH) White, (PS) Platinum Silver, (LG) Light Gray, (TT) Titanium, and (CC) Custom Color (Include RAL#).
Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017
| 3 |
WP9S-LED
WARP9® Small PicoEmitter® LED
kl_wp9seled_spec.pdf
CONTROLS
Photocell Receptacle
WIR-RMI-IO
A25-7
120 - 347V 1000 Foot Range WiScape RF mesh control system with off/on/dim, motion, photo, GPS location, alert, monitoring and metering capabilities.
Fully gasketed and wired 7-pin receptacle option. Easy access location above the electrical compartment. 7-pin construction allows for a user-defined interface and provides a controlled definition of operational performance. ANSI twist-lock control module by-others. Standard customer operation modes: 1. Traditional on/off photoelectric control. 2. 5-pin wireless photoelectric control for added dimming feature. 3. 7-pin wireless photoelectric control for dimming and additional I/O connections for customer use. Gray Wire 0-10V Dimming
Black Wire Line Voltage
White Wire Neutral
Purple Wire 0-10V Dimming
Brown Wire 10V Customer Defined Red Wire Line Voltage
Orange Wire 10V Customer Defined
Button Photocell A30 for 120V, A31 for 208V, A32 for 240V, A33 for 277V, A35 for 347V, A34 for 480V, Photocell is factory installed inside the housing with a fully gasketed sensor on the side wall. For multiple fixture mountings, one fixture is supplied with a photocell to operate the others.
Wireless Controls wiSCAPE™ Hubbell Building Automation’s wiSCAPP In-Fixture Module is a bi-directional wireless RF device that allows an individual fixture to be managed, monitored and metered. The wiSCAPE In-Fixture Module communicates wirelessly over a robust 2.4GHz ISM (Industrial, Scientific and Medical) certified meshed radio signal. The wiSCAPE Fixture Module drastically simplifies control and automation of projects, especially in retrofit environments, and challenges the legacy world of wired-systems. wiSCAPE wireless control technology easily adapts to complex automation situations for quick, simple and economical commissioning. The On-Fixture Module is compatible with A-25-7H option.
SiteSync™1 SiteSync™ wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit www.hubbelllighting.com/products/sitesync for more details.
Pole Mounted Round Pole-Mounted Occupancy Sensor up to 16' SCL-R Round Pole-Mounted Occupancy Sensor up to 16’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCL-R41/2772/BL 3
Square Pole-Mounted Occupancy Sensor up to 16' SCL-S Square Pole-Mounted Occupancy Sensor up to 16’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for square pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCL-L/2772/BL 3
Round Pole-Mounted Occupancy Sensor 16’ to 30’ SCH-R Round Pole-Mounted Occupancy Sensor: 16' to 30’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCH-R41/2772/BL 3
Square Pole-Mounted Occupancy Sensor 16’ to 30’ SCH-S Square Pole-Mounted Occupancy Sensor: 16 to 30’ - an outdoor occupancy sensor with 0-10V interface dimming control that mounts directly to the pole. Wide 360° pattern. Module colors are available in Black, Gray, and White. Module is cut for round pole mounting. Pole diameter is needed upon order. Poles to be drilled in the field will be provided with installation instructions. Ordering Example: SCH-S/2772/BL 3
SCP The SCP is a photo-control with motion sensing accessory thats mounts to the side of any new or existing 3”-5” round or square straight pole. The SCP enables any pole mounted luminaire in excess of 75 watts, to meet California Title 24 requirements with integral 20KV/10KA surge protection for added reliability and serviceability. For more detail: http://www.aal.net/products/sensor_control_ programmable PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit www.HubbellLighting.com/products/ sitesync or contact Hubbell Lighting tech support at (800) 345-4928.
1
SiteSync fixtures with occupancy sensor (SWPM) require the mounting height of the fixture for selection of the lens. Examples: SiteSync only : WP9L1E35/120L3K120/US/SWP SiteSync with Motion Control: WP9L1E35/120L3K120/US/SWPM
Pole Diameter, 2Voltage, 3Color
1
Kim Lighting reserves the right to change specifications without notice. © 2017 KIM LIGHTING | 17760 Rowland Street | City of Industry | CA 91748 P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev. May. 16, 2017
| 4 |
