zero edge 5 series
TM
5 SERIES ZERO EDGE
Owner’s Manual
INSTALLERS: PLEASE BE SURE TO LEAVE THIS MANUAL WITH THE OWNER. THANK YOU!
APPLY S/N STICKER HERE TM
LIMITED ONE YEAR WARRANTY ON SCREEN INNOVATIONS PRODUCTS
Screen Innovations warrants its products, to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser provided they are properly operated according to Screen Innovations’ instructions and are not damaged due to improper handling or treatment after shipment from the factory. This warranty does not apply to equipment showing evidence of misuse, abuse, or accidental damage, or which has been tampered with or repaired by a person other than authorized Screen Innovations personnel. Screen Innovations’ sole obligation under this warranty shall be to repair or to replace (at Screen Innovations’ option) the defective part of the merchandise. Returns for service should be made to your Screen Innovations’ dealer. If it is necessary for the dealer to return the screen or part to Screen Innovations, transportation expenses to and from Screen Innovations are payable by the purchaser and Screen Innovations is not responsible for damage in shipment. To protect yourself against damage or loss in transit, insure the product and prepay all transportation expenses. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES AS TO FITNESS FOR USE AND MERCHANT ABILITY. Any implied warranties of fitness for use, or merchantability, that may be mandated by statute or rule of law are limited to the one (1) year warranty period. This warranty gives you specific legal rights, and you may also have other rights, which vary from state-to-state. NO LIABILITY IS ASSUMED FOR EXPENSES OR DAMAGES RESULTING FROM INTERRUPTION IN OPERATION OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE. In the event that there is a defect in materials or workmanship of a Screen Innovations product, you may contact our Sales Partners at 9715-B Burnet Road Suite 400, Austin, TX 78758, (512) 832-6939. IMPORTANT: THIS WARRANTY SHALL NOT BE VALID AND SCREEN INNOVATIONS SHALL NOT BE BOUND BY THIS WARRANTY IF THE PRODUCT IS NOT OPERATED IN ACCORDANCE WITH SCREEN INNOVATIONS’ WRITTEN INSTRUCTIONS.
Keep your sales receipt to prove the date of purchase and your original ownership.
5 SERIES ZERO EDGE
?
512-832-6939 9715-B Burnet Road Suite 400, Austin,TX 78758 SCREENINNOVATIONS.COM
09052017ZE
3
TM
5 SERIES ZERO EDGE
Projector Placement Better
11°
Good
SCREEN
11°
Best
Not for short throw installations. See below for ST orientation and projector notes.
36”-42”
(91cm - 106cm)
SHORT THROW INSTALLATIONS - Ensure the orientation of the screen is correct before mounting to the wall. For a bottom-mount projector the white side should face down. Looking up at the viewing from the bottom you will see a white screen. It will appear black when viewed looking down. We do not recommend top down projector mounting, but screen mounting is reversed for a top mounted projector. (See the arrows on the back of the screen) ST PROJECTOR PLACEMENT IS DEPENDENT ON THE PROJECTOR MANUFACTURER AND MODEL BEING USED! Follow projector manufacturer recommendations for distance from wall and height in relation to the screen.
4
TM
5 SERIES ZERO EDGE
PRE ASSEMBLED
STANDARD
SPLIT
09052017ZE
6
12
5
TM
Parts Included (some optional) STANDARD (LED Lights Only)
1X 1X 2X 2X 2X 1X Hardware Kit
2X
2X
8X
(MAESTRO and SHORT TROW ONLY)
NOTE: Split frame screens will also include a support bar and related hardware, as well as additional wall brackets.
4X 6
TM
4X
2X
STANDARD
Flying Mount (Only)
2X
09052017ZE
2X
7
TM
1 STANDARD
3
8
TM
STANDARD
4
Finger tighten only at this time. Square the frame before final tightening of set screws.
09052017ZE
9
TM
5
STANDARD
A
B
A=B Using a tape measure or carpenter’s square, ensure the frame is perfectly square, then tighten the set screws using the provided allen wrench. DO NOT USE A DRILL OR IMPACT! You will damage the frame.
6
LED
18
10
TM
19
1 SPLIT
2
09052017ZE
11
TM
SPLIT
3
4
12
TM
5
SPLIT
6
09052017ZE
13
TM
LED Lights
1
2
14
TM
SPLIT
5 SERIES ZERO EDGE Material?
SL ATE & PURE 20
MAESTRO 24
SHORT THROW 30
09052017ZE
15
TM
Material Installation
1
2
16
TM
SLATE/PURE
SLATE/PURE
3
4
09052017ZE
17
TM
SLATE/PURE
5
6
33
18
TM
7
For AT Material Only
SLATE/PURE
Acoustically Transparent (AT) materials come with a black backer that must be installed to eliminate shine through.
Spread out the nuts in the top frame piece and attach the black backer to the nuts with the thumb screws.
09052017ZE
19
TM
Material Installation
1
2
20
TM
MAESTRO
Material Installation
MAESTRO
3
09052017ZE
21
TM
MAESTRO
4
5
22
TM
MAESTRO
6
Starting in the middle of each horizontal and vertical, bungee the middle of each side, then work your way outward, completing a side at a time.
09052017ZE
23
TM
MAESTRO
8
33
24
TM
Material Installation
SHORT THROW
1
2
UP
Carefullly lay the frame onto the back of the screen material. Note the orientation of the UP sticker on the screen material to make sure the lighting harness will be on the bottom of the screen.
09052017ZE
25
TM
SHORT THROW
3
4
26
Starting in the middle of each horizontal and vertical, bungee the middle of each side, then work your way outward, completing a side at a time.
TM
5 SERIES ZERO EDGE
Trim Installation
1
2 SNA
P
Install the trim by slipping the “C” around the material and frame first, then snapping it into place on the back of the frame. Do not force the trim over the material or you may damage the material. 09052017ZE
27
TM
5 SERIES ZERO EDGE
Screen Mounting
28
TM
5 SERIES ZERO EDGE
WALL MOUNT
36
FLYING MOUNT
38
09052017ZE
29
TM
1
WALL MOUNT
4 14 "
(11.1 cm)
Structural Support
Structural Support
LEVEL
TOP OF VIEWING
4 34 "
(12.1 cm)
30
TM
2
WALL MOUNT
3
09052017ZE
31
TM
FLYING MOUNT
1
2 100 lbs (45.3 kg)
32
TM
100 lbs (45.3 kg)
3
FLYING MOUNT
4 NOTE: If you pull too far the screen can be lowered by pushing down the button on the top of the flying mount.
We recommend you don’t cut the extra cables for future adjustability. Simply tape the extra cable to the back of the screen frame.
09052017ZE
33
TM
5 SERIES ZERO EDGE
LED Lighting Hex Codes
34
TM
20 13 5C A3
20 13 5D A2
20 13 OFF 41 BE
20 13 ON 40 BF
20 13 58 A7
20 13 59 A6
20 13 45 BA
20 13 44 BB
20 13 54 AB
20 13 55 AA
20 13 49 B6
20 13 48 B7
20 13 50 AF
20 13 51 AE
20 13 4D B2
20 13 4C B3
20 13 1C E3
20 13 1D E2
20 13 1E E1
20 13 1F E0
20 13 18 E7
20 13 19 E6
20 13 1A E5
20 13 1B E4
20 13 14 EB
20 13 15 EA
20 13 16 E9
20 13 17 E8
20 13 10 EF
20 13 11 EE
20 13 12 ED
20 13 13 EC
20 13 0C F3
20 13 0D F2
20 13 0E F1
20 13 0F F0
20 13 08 F7
20 13 09 F6
20 13 0A F5
20 13 0B F4
20 13 04 FB
20 13 05 FA
20 13 06 F9
20 13 07 F8
5 SERIES ZERO EDGE
Signal
Power
LED CONTROLLER 3.5mm jack (3rd party IR)
Input/Output Voltage: DC 12V-24V Total Output of Current: 12A
DC 12~24V
(Power1)
09052017ZE
35
TM
TM
NOTES:
9715-B Burnet Road Suite 400, Austin,TX 78758 Tel: 512-832-6939 Fax: 512-832-6136 www.screeninnovations.com
5 SERIES ZERO EDGE
Owner’s Manual
INSTALLERS: PLEASE BE SURE TO LEAVE THIS MANUAL WITH THE OWNER. THANK YOU!
APPLY S/N STICKER HERE TM
LIMITED ONE YEAR WARRANTY ON SCREEN INNOVATIONS PRODUCTS
Screen Innovations warrants its products, to the original purchaser only, to be free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original purchaser provided they are properly operated according to Screen Innovations’ instructions and are not damaged due to improper handling or treatment after shipment from the factory. This warranty does not apply to equipment showing evidence of misuse, abuse, or accidental damage, or which has been tampered with or repaired by a person other than authorized Screen Innovations personnel. Screen Innovations’ sole obligation under this warranty shall be to repair or to replace (at Screen Innovations’ option) the defective part of the merchandise. Returns for service should be made to your Screen Innovations’ dealer. If it is necessary for the dealer to return the screen or part to Screen Innovations, transportation expenses to and from Screen Innovations are payable by the purchaser and Screen Innovations is not responsible for damage in shipment. To protect yourself against damage or loss in transit, insure the product and prepay all transportation expenses. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES AS TO FITNESS FOR USE AND MERCHANT ABILITY. Any implied warranties of fitness for use, or merchantability, that may be mandated by statute or rule of law are limited to the one (1) year warranty period. This warranty gives you specific legal rights, and you may also have other rights, which vary from state-to-state. NO LIABILITY IS ASSUMED FOR EXPENSES OR DAMAGES RESULTING FROM INTERRUPTION IN OPERATION OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR CONSEQUENTIAL DAMAGES OF ANY NATURE. In the event that there is a defect in materials or workmanship of a Screen Innovations product, you may contact our Sales Partners at 9715-B Burnet Road Suite 400, Austin, TX 78758, (512) 832-6939. IMPORTANT: THIS WARRANTY SHALL NOT BE VALID AND SCREEN INNOVATIONS SHALL NOT BE BOUND BY THIS WARRANTY IF THE PRODUCT IS NOT OPERATED IN ACCORDANCE WITH SCREEN INNOVATIONS’ WRITTEN INSTRUCTIONS.
Keep your sales receipt to prove the date of purchase and your original ownership.
5 SERIES ZERO EDGE
?
512-832-6939 9715-B Burnet Road Suite 400, Austin,TX 78758 SCREENINNOVATIONS.COM
09052017ZE
3
TM
5 SERIES ZERO EDGE
Projector Placement Better
11°
Good
SCREEN
11°
Best
Not for short throw installations. See below for ST orientation and projector notes.
36”-42”
(91cm - 106cm)
SHORT THROW INSTALLATIONS - Ensure the orientation of the screen is correct before mounting to the wall. For a bottom-mount projector the white side should face down. Looking up at the viewing from the bottom you will see a white screen. It will appear black when viewed looking down. We do not recommend top down projector mounting, but screen mounting is reversed for a top mounted projector. (See the arrows on the back of the screen) ST PROJECTOR PLACEMENT IS DEPENDENT ON THE PROJECTOR MANUFACTURER AND MODEL BEING USED! Follow projector manufacturer recommendations for distance from wall and height in relation to the screen.
4
TM
5 SERIES ZERO EDGE
PRE ASSEMBLED
STANDARD
SPLIT
09052017ZE
6
12
5
TM
Parts Included (some optional) STANDARD (LED Lights Only)
1X 1X 2X 2X 2X 1X Hardware Kit
2X
2X
8X
(MAESTRO and SHORT TROW ONLY)
NOTE: Split frame screens will also include a support bar and related hardware, as well as additional wall brackets.
4X 6
TM
4X
2X
STANDARD
Flying Mount (Only)
2X
09052017ZE
2X
7
TM
1 STANDARD
3
8
TM
STANDARD
4
Finger tighten only at this time. Square the frame before final tightening of set screws.
09052017ZE
9
TM
5
STANDARD
A
B
A=B Using a tape measure or carpenter’s square, ensure the frame is perfectly square, then tighten the set screws using the provided allen wrench. DO NOT USE A DRILL OR IMPACT! You will damage the frame.
6
LED
18
10
TM
19
1 SPLIT
2
09052017ZE
11
TM
SPLIT
3
4
12
TM
5
SPLIT
6
09052017ZE
13
TM
LED Lights
1
2
14
TM
SPLIT
5 SERIES ZERO EDGE Material?
SL ATE & PURE 20
MAESTRO 24
SHORT THROW 30
09052017ZE
15
TM
Material Installation
1
2
16
TM
SLATE/PURE
SLATE/PURE
3
4
09052017ZE
17
TM
SLATE/PURE
5
6
33
18
TM
7
For AT Material Only
SLATE/PURE
Acoustically Transparent (AT) materials come with a black backer that must be installed to eliminate shine through.
Spread out the nuts in the top frame piece and attach the black backer to the nuts with the thumb screws.
09052017ZE
19
TM
Material Installation
1
2
20
TM
MAESTRO
Material Installation
MAESTRO
3
09052017ZE
21
TM
MAESTRO
4
5
22
TM
MAESTRO
6
Starting in the middle of each horizontal and vertical, bungee the middle of each side, then work your way outward, completing a side at a time.
09052017ZE
23
TM
MAESTRO
8
33
24
TM
Material Installation
SHORT THROW
1
2
UP
Carefullly lay the frame onto the back of the screen material. Note the orientation of the UP sticker on the screen material to make sure the lighting harness will be on the bottom of the screen.
09052017ZE
25
TM
SHORT THROW
3
4
26
Starting in the middle of each horizontal and vertical, bungee the middle of each side, then work your way outward, completing a side at a time.
TM
5 SERIES ZERO EDGE
Trim Installation
1
2 SNA
P
Install the trim by slipping the “C” around the material and frame first, then snapping it into place on the back of the frame. Do not force the trim over the material or you may damage the material. 09052017ZE
27
TM
5 SERIES ZERO EDGE
Screen Mounting
28
TM
5 SERIES ZERO EDGE
WALL MOUNT
36
FLYING MOUNT
38
09052017ZE
29
TM
1
WALL MOUNT
4 14 "
(11.1 cm)
Structural Support
Structural Support
LEVEL
TOP OF VIEWING
4 34 "
(12.1 cm)
30
TM
2
WALL MOUNT
3
09052017ZE
31
TM
FLYING MOUNT
1
2 100 lbs (45.3 kg)
32
TM
100 lbs (45.3 kg)
3
FLYING MOUNT
4 NOTE: If you pull too far the screen can be lowered by pushing down the button on the top of the flying mount.
We recommend you don’t cut the extra cables for future adjustability. Simply tape the extra cable to the back of the screen frame.
09052017ZE
33
TM
5 SERIES ZERO EDGE
LED Lighting Hex Codes
34
TM
20 13 5C A3
20 13 5D A2
20 13 OFF 41 BE
20 13 ON 40 BF
20 13 58 A7
20 13 59 A6
20 13 45 BA
20 13 44 BB
20 13 54 AB
20 13 55 AA
20 13 49 B6
20 13 48 B7
20 13 50 AF
20 13 51 AE
20 13 4D B2
20 13 4C B3
20 13 1C E3
20 13 1D E2
20 13 1E E1
20 13 1F E0
20 13 18 E7
20 13 19 E6
20 13 1A E5
20 13 1B E4
20 13 14 EB
20 13 15 EA
20 13 16 E9
20 13 17 E8
20 13 10 EF
20 13 11 EE
20 13 12 ED
20 13 13 EC
20 13 0C F3
20 13 0D F2
20 13 0E F1
20 13 0F F0
20 13 08 F7
20 13 09 F6
20 13 0A F5
20 13 0B F4
20 13 04 FB
20 13 05 FA
20 13 06 F9
20 13 07 F8
5 SERIES ZERO EDGE
Signal
Power
LED CONTROLLER 3.5mm jack (3rd party IR)
Input/Output Voltage: DC 12V-24V Total Output of Current: 12A
DC 12~24V
(Power1)
09052017ZE
35
TM
TM
NOTES:
9715-B Burnet Road Suite 400, Austin,TX 78758 Tel: 512-832-6939 Fax: 512-832-6136 www.screeninnovations.com
