DPA Solar - Radiant PV Racking Catalogue V1.1
DPA Solar Racking Solutions
Radiant Solar PV Racking Catalogue
Roof Mount Ground Mount Specialised Clamps Technical Notes
www.dpasolar.com.au 1300 447 500
Solar PV Racking
August 2013
Rails & Splices
Page 3
Mid & End Clamps
Page 3
Roof Brackets & Fittings
Page 4
Grounding, Clips & Accessories
Page 5
Solar Tripods (tilt)
Page 5
Ground Mount Terrain Rack N System
Profile Information
Page 6
Page 7
Specialist Clamps
HAVE YOU TRIED OUR EXCEL RACKING CALCULATOR ? Enter your panel details, roof parameters and wind region, and the racking calculator will create a Bill of Materials for your requested array layout. It’s easy to use, and takes the guesswork out of specifying your racking requirements. Please contact us for a copy.
Page 2 of 8
Solar PV Racking
August 2013
Rails & Splices Item
Part No.
Description
10-1110-0009 10-1110-0013
Rail 40 x 40 x 3430mm Rail 40 x 40 x 4200mm Ø Clear anodized aluminium. Ø 40mm is the standard profile for general roof and tilt applications.
Rail 13-1211-0015
Rail 60 x 80 x 3430mm Ø Clear anodized aluminium. Ø 60mm is a specialist profile for ground mount applications.
Splice
10-1410-0100 13-1310-0100
Rail splice 40mm Rail splice 60mm Ø Clear anodized aluminium. Ø Stainless steel fixings.
10-1110-0100[GR] 10-1111-0101
End cap 40mm (grey) End cap 60mm (red)
Item
Part No.
Description
Mid Clamp
10-1310-0100 10-1310-0200 10-1310-0300
Suits 35-39mm panel profile Suits 40-46mm panel profile Suits 47-52mm panel profile
End Clamp
10-1210-0100 10-1210-0400 10-1210-0700 10-1210-0900
Suits Suits Suits Suits
End Cap
Mid & End Clamps
35mm 40mm 46mm 50mm
panel panel panel panel
profile profile profile profile
Page 3 of 8
Solar PV Racking
August 2013
Roof Brackets & Fittings Item
Wave Support
Part No.
Description
10-1514-0500 10-1514-0501
Wave support (corrugated roof) – 90 degree
Ø See detailed profile information at rear of catalogue. Ø Includes glued EPDM rubber. Ø Does not include screw (refer to install guide).
‘L-Foot’
10-1514-0900 10-1514-0901
Trim Dek Support
Roof Hook
Wave support (corrugated roof) - 360 swivel
Trim Dek Support –90 degree Trim Dek Support – 360 swivel Ø See detailed profile information at rear of catalogue. Ø Includes glued EPDM rubber. Ø Does not include screw (refer to install guide).
10-1510-0100 10-1510-0101
Aluminium roof hook – 90 degree Aluminium roof hook - 360 swivel
Aluminium Ø Does not include screws (refer to install guide).
Roof Hook
10-1511-0100
Stainless Steel
Stainless steel roof hook – 90 degree Ø Does not include screw (refer to install guide).
10-1514-1100
KlipLok roof clamp #1 (700)
KlipLok #1 Ø See detailed profile information at rear of catalogue. Ø Includes glued EPDM rubber. 10-1514-0100
KlipLok roof clamp #2 (700)
KlipLok #2 Ø See detailed profile information at rear of catalogue. Ø Includes glued EPDM rubber. 10-1514-1000
KlipLok roof clamp #3 (406)
KlipLok #3
Ø Includes glued EPDM rubber.
Page 4 of 8
Solar PV Racking
August 2013
Grounding, Clips & Accessories Item
Part No.
Description
Grounding Clip
10-1610-0100
Grounding clip - stainless steel
Grounding Lug
10-1611-0100
Grounding lug - stainless steel and aluminium
Cable Clip
10-1612-0100
Cable clip – 13mm (plastic)
DC Box Bracket
10-1510-0110
DC Box bracket. Rail mounted, stainless steel.
Micro Inverter Mount
10-1510-0111
Micro-inverter click in mount.
Universal Rail Mount
99-1012-0803
M8 bolt and flange nut. Slides into rail and allows mounting of accessories.
Solar Tripods (tilt) Item
Part No.
Description
11-1110-1000
Solar Tripod (short span)
Solar Tripod
Ø Ø Ø Ø
1200mm span
11-1110-1000
Solar Tripod 1760mm span
1440mm base / 1200mm between centres. 20,25,30 degree tilt. Includes EPDM rubber. Does not include fixings to roof – refer to installation guide for options.
Solar Tripod (wide span) Ø Ø Ø Ø
2000mm base / 1760mm between centres. 20,25,30 degree tilt. Includes EPDM rubber. Does not include fixings to roof – refer to installation guide for options.
Page 5 of 8
Solar PV Racking
August 2013
Ground Mount : Terrain Rack N System The Terrain Rack N System is a high quality, anodized aluminium racking solution. It features an efficient design that is quick to install, and supports both concrete and pile mounted solutions. Use our Ground Mount Calculator to configure a solution based on your selection of: • • •
Panel dimensions and profile Number of panels to be mounted Screw pile or concrete footings
Contact us for a copy
Typical N System Solution: 20 x 250W (5kW) with concrete
Typical N System Solution: 20 x 250W (5kW) with screw piles
Page 6 of 8
Solar PV Racking
August 2013
Profile Information: Specialist Clamps
Page 7 of 8
Solar PV Racking
August 2013
Authorised distributor: DPA Solar Pty Ltd 34 Fennell St Port Melbourne VIC 3207 www.dpasolar.com.au 1300 447 500 [email protected]
Page 8 of 8
Radiant Solar PV Racking Catalogue
Roof Mount Ground Mount Specialised Clamps Technical Notes
www.dpasolar.com.au 1300 447 500
Solar PV Racking
August 2013
Rails & Splices
Page 3
Mid & End Clamps
Page 3
Roof Brackets & Fittings
Page 4
Grounding, Clips & Accessories
Page 5
Solar Tripods (tilt)
Page 5
Ground Mount Terrain Rack N System
Profile Information
Page 6
Page 7
Specialist Clamps
HAVE YOU TRIED OUR EXCEL RACKING CALCULATOR ? Enter your panel details, roof parameters and wind region, and the racking calculator will create a Bill of Materials for your requested array layout. It’s easy to use, and takes the guesswork out of specifying your racking requirements. Please contact us for a copy.
Page 2 of 8
Solar PV Racking
August 2013
Rails & Splices Item
Part No.
Description
10-1110-0009 10-1110-0013
Rail 40 x 40 x 3430mm Rail 40 x 40 x 4200mm Ø Clear anodized aluminium. Ø 40mm is the standard profile for general roof and tilt applications.
Rail 13-1211-0015
Rail 60 x 80 x 3430mm Ø Clear anodized aluminium. Ø 60mm is a specialist profile for ground mount applications.
Splice
10-1410-0100 13-1310-0100
Rail splice 40mm Rail splice 60mm Ø Clear anodized aluminium. Ø Stainless steel fixings.
10-1110-0100[GR] 10-1111-0101
End cap 40mm (grey) End cap 60mm (red)
Item
Part No.
Description
Mid Clamp
10-1310-0100 10-1310-0200 10-1310-0300
Suits 35-39mm panel profile Suits 40-46mm panel profile Suits 47-52mm panel profile
End Clamp
10-1210-0100 10-1210-0400 10-1210-0700 10-1210-0900
Suits Suits Suits Suits
End Cap
Mid & End Clamps
35mm 40mm 46mm 50mm
panel panel panel panel
profile profile profile profile
Page 3 of 8
Solar PV Racking
August 2013
Roof Brackets & Fittings Item
Wave Support
Part No.
Description
10-1514-0500 10-1514-0501
Wave support (corrugated roof) – 90 degree
Ø See detailed profile information at rear of catalogue. Ø Includes glued EPDM rubber. Ø Does not include screw (refer to install guide).
‘L-Foot’
10-1514-0900 10-1514-0901
Trim Dek Support
Roof Hook
Wave support (corrugated roof) - 360 swivel
Trim Dek Support –90 degree Trim Dek Support – 360 swivel Ø See detailed profile information at rear of catalogue. Ø Includes glued EPDM rubber. Ø Does not include screw (refer to install guide).
10-1510-0100 10-1510-0101
Aluminium roof hook – 90 degree Aluminium roof hook - 360 swivel
Aluminium Ø Does not include screws (refer to install guide).
Roof Hook
10-1511-0100
Stainless Steel
Stainless steel roof hook – 90 degree Ø Does not include screw (refer to install guide).
10-1514-1100
KlipLok roof clamp #1 (700)
KlipLok #1 Ø See detailed profile information at rear of catalogue. Ø Includes glued EPDM rubber. 10-1514-0100
KlipLok roof clamp #2 (700)
KlipLok #2 Ø See detailed profile information at rear of catalogue. Ø Includes glued EPDM rubber. 10-1514-1000
KlipLok roof clamp #3 (406)
KlipLok #3
Ø Includes glued EPDM rubber.
Page 4 of 8
Solar PV Racking
August 2013
Grounding, Clips & Accessories Item
Part No.
Description
Grounding Clip
10-1610-0100
Grounding clip - stainless steel
Grounding Lug
10-1611-0100
Grounding lug - stainless steel and aluminium
Cable Clip
10-1612-0100
Cable clip – 13mm (plastic)
DC Box Bracket
10-1510-0110
DC Box bracket. Rail mounted, stainless steel.
Micro Inverter Mount
10-1510-0111
Micro-inverter click in mount.
Universal Rail Mount
99-1012-0803
M8 bolt and flange nut. Slides into rail and allows mounting of accessories.
Solar Tripods (tilt) Item
Part No.
Description
11-1110-1000
Solar Tripod (short span)
Solar Tripod
Ø Ø Ø Ø
1200mm span
11-1110-1000
Solar Tripod 1760mm span
1440mm base / 1200mm between centres. 20,25,30 degree tilt. Includes EPDM rubber. Does not include fixings to roof – refer to installation guide for options.
Solar Tripod (wide span) Ø Ø Ø Ø
2000mm base / 1760mm between centres. 20,25,30 degree tilt. Includes EPDM rubber. Does not include fixings to roof – refer to installation guide for options.
Page 5 of 8
Solar PV Racking
August 2013
Ground Mount : Terrain Rack N System The Terrain Rack N System is a high quality, anodized aluminium racking solution. It features an efficient design that is quick to install, and supports both concrete and pile mounted solutions. Use our Ground Mount Calculator to configure a solution based on your selection of: • • •
Panel dimensions and profile Number of panels to be mounted Screw pile or concrete footings
Contact us for a copy
Typical N System Solution: 20 x 250W (5kW) with concrete
Typical N System Solution: 20 x 250W (5kW) with screw piles
Page 6 of 8
Solar PV Racking
August 2013
Profile Information: Specialist Clamps
Page 7 of 8
Solar PV Racking
August 2013
Authorised distributor: DPA Solar Pty Ltd 34 Fennell St Port Melbourne VIC 3207 www.dpasolar.com.au 1300 447 500 [email protected]
Page 8 of 8
