[EPA-HQ-OPPT-2015-0504; FRL-9936-40] Certain New Chemicals
This document is scheduled to be published in the Federal Register on 11/13/2015 and available online at http://federalregister.gov/a/2015-28842, and on FDsys.gov
BILLING CODE 6560-50-P ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2015-0504; FRL-9936-40] Certain New Chemicals; Receipt and Status Information for September 2015 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from September 1, 2015 to September 30, 2015. DATES: Comments identified by the specific case number provided in this document, must be received on or before [insert date 30 days after date of publication in the Federal Register]. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT2015-0504, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods: • Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. 15T-0289
2 • Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in
3 the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What Action is the Agency Taking? This document provides receipt and status reports, which cover the period from September 1, 2015 to September 30, 2015, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's Authority for Taking this Action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA’s TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register
4 periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 55 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1.–PMNs Received From September 1, 2015 to September 30, 2015 Case No.
Date Received
Projected End Date for EPA Review
Manufacturer Importer
Use(s)
Chemical Identity (G) Alkyl alkenoic acid, substituted alkyl ester, polymer with alkyl alkenoate and substituted alkyl alkenoate compd. with alkyl alkyl carbomonocyclic salt (G) Cellulose, polymer with substituted oxirane, 2(diethylamino) ethyl ether (G) Modified polyacrylamide
P-150703
8/26/2015
11/24/2015 CBI
(G) Additive in toner
P-150713
9/1/2015
11/30/2015 CBI
(G) Contained use
P-150714
9/1/2015
11/30/2015 Kemira
P-150715
9/3/2015
12/2/2015 CBI
(G) Paper strength additive (G) Additive for inks
P-150717
9/3/2015
12/2/2015 CBI
(G) Adhesive additive
(G) Oxirane, 2-ethyl-, homopolymer, 3-(5-carboxy1,3-dihydro-,1,3-dioxo-2Hisoindol-2-yl) alkyl ethers (G) Triethoxysilylalkoxy polyalkylene glycol urethane
5 P-150718 P-150719
9/3/2015
12/2/2015 CBI
(G) Adhesive additive (G) Flame retardant synergist (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Co-polymer for use in adhesives and sealant formulations (S) Fragrance in household products (S) Fragrance in a fine fragrance
(G) Triethoxysilylalkoxy polyalkylene glycol urethane (S) Poly (1,4-diisopropyl benzene)
9/3/2015
12/2/2015 CBI
P-150720
9/4/2015
12/3/2015 CBI
P-150721
9/4/2015
12/3/2015 CBI
P-150722
9/4/2015
12/3/2015 CBI
P-150723
9/4/2015
12/3/2015 CBI
P-150724
9/4/2015
12/3/2015 CBI
P-150725
9/4/2015
12/3/2015 CBI
P-150726
9/4/2015
12/3/2015 CBI
P-150728
9/9/2015
12/8/2015 TAKASAGO
P-150728
9/9/2015
12/8/2015 TAKASAGO
P-150728
9/9/2015
12/8/2015 TAKASAGO
(S) Fragrance in consumer products
(S) Benzenemethanol, 3ethoxy-4-hydroxy-
P-150728
9/9/2015
12/8/2015 TAKASAGO
(S) Fragrance in other products
(S) Benzenemethanol, 3ethoxy-4-hydroxy-
P-150730
9/10/2015
12/9/2015 CBI
(G) Additive for paper and paperboard
(G) Amphoteric polyacrylamide
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Triethoxysilylalkoxy polyalkylene glycol
(S) Benzenemethanol, 3ethoxy-4-hydroxy(S) Benzenemethanol, 3ethoxy-4-hydroxy-
6 P-150731
9/10/2015
12/9/2015 CBI
(G) Additive for paper and paperboard (S) Coating for glass
P-150733
9/10/2015
12/9/2015 Cadence Chemical Corporation
P-150734
9/11/2015
12/10/2015 CBI
(S) Wastewater Heavy Metals Removal
P-150735
9/15/2015
12/14/2015 Cray Valley USA, LLC
(S) Adhesive Formulation
P-150735
9/15/2015
12/14/2015 Cray Valley USA, LLC
(S) Rubber Formulation
P-150736
9/18/2015
12/17/2015 CBI
(S) Industrial coating resin for wood substances
P-150737 P-150738
9/16/2015
12/15/2015 CBI
9/17/2015
12/16/2015 CBI
P-150739
9/17/2015
12/16/2015 CBI
(G) Intermediate (S) Injection molding additive to improve the physical properties of plastic parts (S) Component of Flexible Foam
(G) Amphoteric polyacrylamide
(G) Alkane carboxylic acid, hydroxy, hydroxyalkyl-alkyl, polymer with .alpha.-hydro.omega.-hydroxypoly(oxy-1,2ethanediyl) ether with alkyl(hydroxyalkyl)-alkanediol (X:1), .alpha.-hydro-.omega.hydroxypoly[oxy(alkylalkyldiyl)] and alkylenebis [isocyanatoalkane],-blocked (G) Polymeric Sulfide
(S) Hydrocarbons, C5-rich, polymers with (6E)-7, 11dimethyl-3-methylene-1,6,10dodecatriene, 2-methylbutene and methylstyrene (S) Hydrocarbons, C5-rich, polymers with (6E)-7, 11dimethyl-3-methylene-1,6,10dodecatriene, 2-methylbutene and methylstyrene (G) Castor oil, polymer with substituted alkanoic acid, substituted carbomonocycle, dialkyl substituted alkanediol and TDI, substituted alkanoneblocked (G) Ammonium salts of phosphate methacrylate (G) Polysiloxane-polycarbonate copolymer
(G) Epoxy Terminated Polymer
7 P-150740
9/17/2015
12/16/2015 Allnex USA, Inc.
(S) Digital printing applications
P-150741
9/17/2015
12/16/2015 CBI
P-150742 P-150743
9/17/2015
12/16/2015 CBI
9/17/2015
12/16/2015 Eden Innovations
P-150744
9/18/2015 12/17/2015
(S) Mixture of modified urethane polymers used as a deflocculating and dispersing additive in industrial coatings (G) Component for tire (G) The liquid solution is an admixture that is used by the concrete industry to enhance product performance. It is mainly used to increase the concrete's abrasion resistance, and increase the compressive and split tensile strengths; see internal comments (G) Construction material
3 M Company
(G) Disubstituted alkanedioic acid, polymer with substituted carbomonocycle, dialkyl carbonate, alkanediol and (alkylimino) bis [alkanol], acetate (salt) (G) Mixture of Modified urethane polymers
(G) Modified Copolymer of Buta-1,3-diene and Styrene (G) Nano particle liquid concrete admixture
(G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate
8 P-150745
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150746
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150747
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150748
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150749
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150750
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150751
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150752
9/22/2015
12/21/2015 CBI
P-150753
9/22/2015
12/21/2015 CBI
P-150754
9/22/2015
12/21/2015 CBI
(G) Additive, open, nondispersive use (G) Additive, open, nondispersive use G) Additive, open, nondispersive use
(G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Polysiloxane, di-Me, epoxyfunctional (G) Polyester amine adduct
(G) Polyester amine adduct
9 P-150755
9/22/2015
12/21/2015 CBI
P-150759
9/24/2015
12/23/2015 CBI
P-150760
9/24/2015
12/23/2015 CBI
P-150761
9/24/2015
12/23/2015 CBI
P-150762
9/24/2015
12/23/2015 CBI
P-150763
9/24/2015
12/23/2015 CBI
G) Additive, open, nondispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive
(G) Polyester amine adduct
(G) Isocyanate-terminated urethane prepolymer
(G) Isocyanate-terminated urethane prepolymer
(G) Isocyanate-terminated polyester-based urethane prepolymer
(G) Isocyanate-terminated polyester-based urethane prepolymer
(G) Isocyanate-terminated polyester-based urethane prepolymer
10 use
P-150764
9/24/2015
12/23/2015 CBI
P-150765
9/25/2015
P-150766
9/28/2015
12/24/2015 ANGUS Chemical Company 12/27/2015 Reichhold
P-150767
9/29/2015
12/28/2015 Reichhold
P-150768
9/29/2015
12/28/2015 Allnex USA, Inc.
P-150769
9/30/2015
12/29/2015 LUNA, Inc.
(G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Chemical Absorbant
(G) Isocyanate-terminated polybutadiene-based urethane polymer
(S) Resin for flame retardant polyesters (S) Resin used for flame retardant polyester applications (S) Crosslinker in the construction of an in-site encapsulation product (S) Component of protective coating
(G) Halogenated epoxy polymer with alkeneoic acid
(G) Tertiary Amino Polyol
(G) Halogenated bisphenol a, polymer with epoxy resin and phenolic epoxy, alkeneoic acids,
(G) Alkanedial, polymer with alkyleneurea and alkylalkanediol
(G) Polyurethane Silane
For the one TME received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity. Table 2.–TME Received From September 1, 2015 to September 30, 2015
11 Case No.
Date Received
T-15-0017
9/21/2015
Projected End Date for EPA Review
Manufacturer/ Importer
11/5/2015
NON-CBI
Use
Resin for coating formulation
Chemical Identity
(S) EHTM
For the 25 NOCs received by EPA during this period, Table 3 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 3.–NOCs Received From September 1, 2015 to September 30, 2015 Case No. J-15-0017 P-12-0078
Received Date 9/11/2015 9/15/2015
Projected Date of Commencement 8/14/2015 8/26/2015
P-12-0437
9/3/2015
8/13/2015
P-13-0246
9/9/2015
8/12/2015
P-13-0309
9/24/2015
9/15/2015
P-14-0142 P-14-0605 P-14-0738
9/24/2015 9/10/2015 9/3/2015
9/22/2015 9/10/2015 8/31/2015
P-14-0809 P-15-0036 P-15-0152 P-15-0308
9/29/2015 9/1/2015 9/24/2015 9/14/2015
9/2/2015 8/28/2015 9/2/2015 8/31/2015
P-15-0311
9/18/2015
9/3/2015
P-150364
9/23/2015
9/13/2015
Chemical Identity (G) Modified organism (S) 1-Octanesulfonic acid, 3,3,4,4,5,5,6,6,7,7,8,8,8tridecafluoro-, barium salt (2:1) (S) Quaternary ammonium compounds, bis (hydrogenated tallow alkyl) dimethyl, salts with tannins (G) Cobalt based polymer with fatty acids, and polyol (S) Alcohols, c9-11-branched, ethoxylated propoxylated (G) Ethoxylated Resin (G) Substituted cyclosiloxane (G) Polyalkylene ether alkyl phosphate polyurethane prepolymer (G) Depolymerized waste plastics (S) 2-Pyridinecarboxylic acid, 4,5,6-trichloro(G) Urethane acrylate (G) Dicarboxylic acid, cycloaliphatic anhydride polymer with alkyldiol, hydroxy-[(oxoalkyl)oxy]alkyl ester (G) Triarylsulfonium salt with haloalkyl phosphate
(G) Reaction mixture of copper, [29h,31hphthalocyaninato(2-).kappa.n29,.kappa.n30,.kappa.n31,.kappa.n32]-, (sp-4-1)and metal, [substituted 29h,31h-phthalocyanine-
12 .kappa.n29,.kappa.n30,.kappa.n31,lkappa.n32]P-150365
9/2/2015
8/21/2015
(G) Alkyl alkenoic acid polymers with alkyl acrylate, alkyl methacrylate, polyether methacrylate alkyl ethers and substituted heteromonocycle, compds. with substituted alkyl alkanol (G) Substituted carbopolycyclic dicarboxylic acid dialkyl ester, polymer with dialkyl carbopolycyclic ester, alkanediol and carbopolycyclic bis (substituted carbomonocycle) (G) Alkylmethacrylate, polymer with alkenylbenzene, branched alkylmethacrylate, hydroxyalkylmethacrylate and acrylic acid, t-butyl alkaneperoxoic acid ester-initiated (S) 1,3-Butadiene, homopolymer, hydrogenated, 2hydroxyethyl-terminated, bis[n-[4-[(4isocyanatophenyl)methyl]phenyl]carbamates] (G) Fatty acid esters with polyols polyalkyl ethers
P-150390
9/10/2015
9/3/2015
P-150396
9/24/2015
9/4/2015
P-150410
9/18/2015
8/18/2015
P-150411 P-150427
9/7/2015
9/3/2015
9/24/2015
8/9/2015
(G) Substituted alkylene carbomonocycle, homopolymer, substituted polyol and mono alkyl ether-blocked polyol
P-150456 P-150466 P-150467
9/4/2015
8/21/2015
(G) Amine functional epoxy, organic acid salt
9/16/2015
9/11/2015
(G) Acrylic acid polymer
9/18/2015
9/14/2015
P-150495 P-150497
9/9/2015
8/30/2015
9/9/2015
8/30/2015
(S) 2-Oxepanone, polymer with 5-amino-1,3,3trimethylcyclohexanemethanamine, 1,2-ethanediol and 5isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane (G) Aromatic anhydride, polymer with alkane diol and alkane triol, 2-propenoate (G) Bisphenol an epoxy polymer with aromatic anhydride, mixed caprolactone acrylate and hydroxyethyl acrylate esters
13 Authority: 15 U.S.C. 2601 et seq. Dated: November 5, 2015. Pamela Myrick, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2015-28842 Filed: 11/12/2015 8:45 am; Publication Date: 11/13/2015]
BILLING CODE 6560-50-P ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2015-0504; FRL-9936-40] Certain New Chemicals; Receipt and Status Information for September 2015 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from September 1, 2015 to September 30, 2015. DATES: Comments identified by the specific case number provided in this document, must be received on or before [insert date 30 days after date of publication in the Federal Register]. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT2015-0504, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods: • Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. 15T-0289
2 • Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in
3 the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What Action is the Agency Taking? This document provides receipt and status reports, which cover the period from September 1, 2015 to September 30, 2015, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's Authority for Taking this Action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA’s TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register
4 periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 55 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity. Table 1.–PMNs Received From September 1, 2015 to September 30, 2015 Case No.
Date Received
Projected End Date for EPA Review
Manufacturer Importer
Use(s)
Chemical Identity (G) Alkyl alkenoic acid, substituted alkyl ester, polymer with alkyl alkenoate and substituted alkyl alkenoate compd. with alkyl alkyl carbomonocyclic salt (G) Cellulose, polymer with substituted oxirane, 2(diethylamino) ethyl ether (G) Modified polyacrylamide
P-150703
8/26/2015
11/24/2015 CBI
(G) Additive in toner
P-150713
9/1/2015
11/30/2015 CBI
(G) Contained use
P-150714
9/1/2015
11/30/2015 Kemira
P-150715
9/3/2015
12/2/2015 CBI
(G) Paper strength additive (G) Additive for inks
P-150717
9/3/2015
12/2/2015 CBI
(G) Adhesive additive
(G) Oxirane, 2-ethyl-, homopolymer, 3-(5-carboxy1,3-dihydro-,1,3-dioxo-2Hisoindol-2-yl) alkyl ethers (G) Triethoxysilylalkoxy polyalkylene glycol urethane
5 P-150718 P-150719
9/3/2015
12/2/2015 CBI
(G) Adhesive additive (G) Flame retardant synergist (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Polyurethane prepolymer (S) Co-polymer for use in adhesives and sealant formulations (S) Fragrance in household products (S) Fragrance in a fine fragrance
(G) Triethoxysilylalkoxy polyalkylene glycol urethane (S) Poly (1,4-diisopropyl benzene)
9/3/2015
12/2/2015 CBI
P-150720
9/4/2015
12/3/2015 CBI
P-150721
9/4/2015
12/3/2015 CBI
P-150722
9/4/2015
12/3/2015 CBI
P-150723
9/4/2015
12/3/2015 CBI
P-150724
9/4/2015
12/3/2015 CBI
P-150725
9/4/2015
12/3/2015 CBI
P-150726
9/4/2015
12/3/2015 CBI
P-150728
9/9/2015
12/8/2015 TAKASAGO
P-150728
9/9/2015
12/8/2015 TAKASAGO
P-150728
9/9/2015
12/8/2015 TAKASAGO
(S) Fragrance in consumer products
(S) Benzenemethanol, 3ethoxy-4-hydroxy-
P-150728
9/9/2015
12/8/2015 TAKASAGO
(S) Fragrance in other products
(S) Benzenemethanol, 3ethoxy-4-hydroxy-
P-150730
9/10/2015
12/9/2015 CBI
(G) Additive for paper and paperboard
(G) Amphoteric polyacrylamide
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Aliphatic polyester polyol
(G) Triethoxysilylalkoxy polyalkylene glycol
(S) Benzenemethanol, 3ethoxy-4-hydroxy(S) Benzenemethanol, 3ethoxy-4-hydroxy-
6 P-150731
9/10/2015
12/9/2015 CBI
(G) Additive for paper and paperboard (S) Coating for glass
P-150733
9/10/2015
12/9/2015 Cadence Chemical Corporation
P-150734
9/11/2015
12/10/2015 CBI
(S) Wastewater Heavy Metals Removal
P-150735
9/15/2015
12/14/2015 Cray Valley USA, LLC
(S) Adhesive Formulation
P-150735
9/15/2015
12/14/2015 Cray Valley USA, LLC
(S) Rubber Formulation
P-150736
9/18/2015
12/17/2015 CBI
(S) Industrial coating resin for wood substances
P-150737 P-150738
9/16/2015
12/15/2015 CBI
9/17/2015
12/16/2015 CBI
P-150739
9/17/2015
12/16/2015 CBI
(G) Intermediate (S) Injection molding additive to improve the physical properties of plastic parts (S) Component of Flexible Foam
(G) Amphoteric polyacrylamide
(G) Alkane carboxylic acid, hydroxy, hydroxyalkyl-alkyl, polymer with .alpha.-hydro.omega.-hydroxypoly(oxy-1,2ethanediyl) ether with alkyl(hydroxyalkyl)-alkanediol (X:1), .alpha.-hydro-.omega.hydroxypoly[oxy(alkylalkyldiyl)] and alkylenebis [isocyanatoalkane],-blocked (G) Polymeric Sulfide
(S) Hydrocarbons, C5-rich, polymers with (6E)-7, 11dimethyl-3-methylene-1,6,10dodecatriene, 2-methylbutene and methylstyrene (S) Hydrocarbons, C5-rich, polymers with (6E)-7, 11dimethyl-3-methylene-1,6,10dodecatriene, 2-methylbutene and methylstyrene (G) Castor oil, polymer with substituted alkanoic acid, substituted carbomonocycle, dialkyl substituted alkanediol and TDI, substituted alkanoneblocked (G) Ammonium salts of phosphate methacrylate (G) Polysiloxane-polycarbonate copolymer
(G) Epoxy Terminated Polymer
7 P-150740
9/17/2015
12/16/2015 Allnex USA, Inc.
(S) Digital printing applications
P-150741
9/17/2015
12/16/2015 CBI
P-150742 P-150743
9/17/2015
12/16/2015 CBI
9/17/2015
12/16/2015 Eden Innovations
P-150744
9/18/2015 12/17/2015
(S) Mixture of modified urethane polymers used as a deflocculating and dispersing additive in industrial coatings (G) Component for tire (G) The liquid solution is an admixture that is used by the concrete industry to enhance product performance. It is mainly used to increase the concrete's abrasion resistance, and increase the compressive and split tensile strengths; see internal comments (G) Construction material
3 M Company
(G) Disubstituted alkanedioic acid, polymer with substituted carbomonocycle, dialkyl carbonate, alkanediol and (alkylimino) bis [alkanol], acetate (salt) (G) Mixture of Modified urethane polymers
(G) Modified Copolymer of Buta-1,3-diene and Styrene (G) Nano particle liquid concrete admixture
(G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate
8 P-150745
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150746
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150747
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150748
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150749
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150750
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150751
9/18/2015
12/17/2015 3 M Company
(G) Construction material
P-150752
9/22/2015
12/21/2015 CBI
P-150753
9/22/2015
12/21/2015 CBI
P-150754
9/22/2015
12/21/2015 CBI
(G) Additive, open, nondispersive use (G) Additive, open, nondispersive use G) Additive, open, nondispersive use
(G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with boron sodium oxide (b4na2o7), hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Naturally-occurring minerals, reaction products with hetero substituted alkyl acrylate polymer, kaolin and sodium silicate (G) Polysiloxane, di-Me, epoxyfunctional (G) Polyester amine adduct
(G) Polyester amine adduct
9 P-150755
9/22/2015
12/21/2015 CBI
P-150759
9/24/2015
12/23/2015 CBI
P-150760
9/24/2015
12/23/2015 CBI
P-150761
9/24/2015
12/23/2015 CBI
P-150762
9/24/2015
12/23/2015 CBI
P-150763
9/24/2015
12/23/2015 CBI
G) Additive, open, nondispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive
(G) Polyester amine adduct
(G) Isocyanate-terminated urethane prepolymer
(G) Isocyanate-terminated urethane prepolymer
(G) Isocyanate-terminated polyester-based urethane prepolymer
(G) Isocyanate-terminated polyester-based urethane prepolymer
(G) Isocyanate-terminated polyester-based urethane prepolymer
10 use
P-150764
9/24/2015
12/23/2015 CBI
P-150765
9/25/2015
P-150766
9/28/2015
12/24/2015 ANGUS Chemical Company 12/27/2015 Reichhold
P-150767
9/29/2015
12/28/2015 Reichhold
P-150768
9/29/2015
12/28/2015 Allnex USA, Inc.
P-150769
9/30/2015
12/29/2015 LUNA, Inc.
(G) Polyurethane prepolymer for use in cast polyurethane elastomer parts: Open, non-dispersive use (G) Chemical Absorbant
(G) Isocyanate-terminated polybutadiene-based urethane polymer
(S) Resin for flame retardant polyesters (S) Resin used for flame retardant polyester applications (S) Crosslinker in the construction of an in-site encapsulation product (S) Component of protective coating
(G) Halogenated epoxy polymer with alkeneoic acid
(G) Tertiary Amino Polyol
(G) Halogenated bisphenol a, polymer with epoxy resin and phenolic epoxy, alkeneoic acids,
(G) Alkanedial, polymer with alkyleneurea and alkylalkanediol
(G) Polyurethane Silane
For the one TME received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the TME, the date the TME was received by EPA, the projected end date for EPA's review of the TME, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the TME, and the chemical identity. Table 2.–TME Received From September 1, 2015 to September 30, 2015
11 Case No.
Date Received
T-15-0017
9/21/2015
Projected End Date for EPA Review
Manufacturer/ Importer
11/5/2015
NON-CBI
Use
Resin for coating formulation
Chemical Identity
(S) EHTM
For the 25 NOCs received by EPA during this period, Table 3 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 3.–NOCs Received From September 1, 2015 to September 30, 2015 Case No. J-15-0017 P-12-0078
Received Date 9/11/2015 9/15/2015
Projected Date of Commencement 8/14/2015 8/26/2015
P-12-0437
9/3/2015
8/13/2015
P-13-0246
9/9/2015
8/12/2015
P-13-0309
9/24/2015
9/15/2015
P-14-0142 P-14-0605 P-14-0738
9/24/2015 9/10/2015 9/3/2015
9/22/2015 9/10/2015 8/31/2015
P-14-0809 P-15-0036 P-15-0152 P-15-0308
9/29/2015 9/1/2015 9/24/2015 9/14/2015
9/2/2015 8/28/2015 9/2/2015 8/31/2015
P-15-0311
9/18/2015
9/3/2015
P-150364
9/23/2015
9/13/2015
Chemical Identity (G) Modified organism (S) 1-Octanesulfonic acid, 3,3,4,4,5,5,6,6,7,7,8,8,8tridecafluoro-, barium salt (2:1) (S) Quaternary ammonium compounds, bis (hydrogenated tallow alkyl) dimethyl, salts with tannins (G) Cobalt based polymer with fatty acids, and polyol (S) Alcohols, c9-11-branched, ethoxylated propoxylated (G) Ethoxylated Resin (G) Substituted cyclosiloxane (G) Polyalkylene ether alkyl phosphate polyurethane prepolymer (G) Depolymerized waste plastics (S) 2-Pyridinecarboxylic acid, 4,5,6-trichloro(G) Urethane acrylate (G) Dicarboxylic acid, cycloaliphatic anhydride polymer with alkyldiol, hydroxy-[(oxoalkyl)oxy]alkyl ester (G) Triarylsulfonium salt with haloalkyl phosphate
(G) Reaction mixture of copper, [29h,31hphthalocyaninato(2-).kappa.n29,.kappa.n30,.kappa.n31,.kappa.n32]-, (sp-4-1)and metal, [substituted 29h,31h-phthalocyanine-
12 .kappa.n29,.kappa.n30,.kappa.n31,lkappa.n32]P-150365
9/2/2015
8/21/2015
(G) Alkyl alkenoic acid polymers with alkyl acrylate, alkyl methacrylate, polyether methacrylate alkyl ethers and substituted heteromonocycle, compds. with substituted alkyl alkanol (G) Substituted carbopolycyclic dicarboxylic acid dialkyl ester, polymer with dialkyl carbopolycyclic ester, alkanediol and carbopolycyclic bis (substituted carbomonocycle) (G) Alkylmethacrylate, polymer with alkenylbenzene, branched alkylmethacrylate, hydroxyalkylmethacrylate and acrylic acid, t-butyl alkaneperoxoic acid ester-initiated (S) 1,3-Butadiene, homopolymer, hydrogenated, 2hydroxyethyl-terminated, bis[n-[4-[(4isocyanatophenyl)methyl]phenyl]carbamates] (G) Fatty acid esters with polyols polyalkyl ethers
P-150390
9/10/2015
9/3/2015
P-150396
9/24/2015
9/4/2015
P-150410
9/18/2015
8/18/2015
P-150411 P-150427
9/7/2015
9/3/2015
9/24/2015
8/9/2015
(G) Substituted alkylene carbomonocycle, homopolymer, substituted polyol and mono alkyl ether-blocked polyol
P-150456 P-150466 P-150467
9/4/2015
8/21/2015
(G) Amine functional epoxy, organic acid salt
9/16/2015
9/11/2015
(G) Acrylic acid polymer
9/18/2015
9/14/2015
P-150495 P-150497
9/9/2015
8/30/2015
9/9/2015
8/30/2015
(S) 2-Oxepanone, polymer with 5-amino-1,3,3trimethylcyclohexanemethanamine, 1,2-ethanediol and 5isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane (G) Aromatic anhydride, polymer with alkane diol and alkane triol, 2-propenoate (G) Bisphenol an epoxy polymer with aromatic anhydride, mixed caprolactone acrylate and hydroxyethyl acrylate esters
13 Authority: 15 U.S.C. 2601 et seq. Dated: November 5, 2015. Pamela Myrick, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2015-28842 Filed: 11/12/2015 8:45 am; Publication Date: 11/13/2015]
