FRL 9939-67] Certain New Chemicals
This document is scheduled to be published in the Federal Register on 12/15/2015 and available online at http://federalregister.gov/a/2015-31522, and on FDsys.gov
BILLING CODE 6560-50-P
ENVIRONMENTAL PROTECTION AGENCY EPA-HQ-OPPT-2015-0505; FRL 9939-67] Certain New Chemicals; Receipt and Status Information for October 2015 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from October 1, 2015 to October 30, 2015. DATES: Comments identified by the specific case number provided in this document, must be received on or before [insert date 30 days after date of publication in the Federal Register]. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT2015-0505, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods: • Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
15T-0325
2 • Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in
3 the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What Action is the Agency Taking? This document provides receipt and status reports, which cover the period from October 1, 2015 to October 30, 2015, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's Authority for Taking this Action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA’s TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register
4 periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 47 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity.
Table 1.–PMNs Received From October 1, 2015 to October 30, 2015 Case No.
Date Received
Manufacturer/ Importer
10/30/2015
Projected End Date for EPA Review 1/28/2016
P-15-0769
P-16-0001
10/1/2015
12/30/2015
CBI
P-16-0002
10/1/2015
12/30/2015
P-16-0003
10/1/2015
12/30/2015
LUNA, Inc.
Use(s)
Chemical Identity
(S) Binder for protective coating (G) Catalyst production of industrial intermediates
(G) Polyurethane silane
Allnex USA, Inc.
(G) Adhesion promoting reactive binder
CBI
(G) Catalyst
(G) Substituted carbomonocycle, polymer with alkanediol, substitutedalkanediol, substituted heteropolycycle and heteropolycycle (G) Metal glycolate complex
(G) Hydrolytic enzymes
5 P-16-0004
10/1/2015
12/30/2015
CBI
(G) Catalyst
(G) Metal glycolate complex
P-16-0005
10/3/2015
1/1/2016
CBI
(G) Pigment formulation additive
(G) Alkyldioic acid, polymer with alkylamine, alkyldiol and 1,3-isobenzofurandione, reaction products with fatty acid
P-16-0006
10/6/2015
1/4/2016
CBI
(G) Additive used in inks
P-16-0007
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0008
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0009
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0010
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0011
10/6/2015
1/4/2016
Huntsman International, LLC
(S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (S) Foam stabilizer and rheology modifier in dishwashing
(G) Alkyl alkenoic acid, polymer with cycloalkyl alkyl alkenoate, substituted alkyl alkenoate, alkyl alkyl alkenoate and substituted alkyl alkenoate (S) Fatty acids, grape seed-oil, esters with polyethylene glycol ether with glycerol (3:1)
(S) Fatty acids, grape seed-oil, esters with polyethylene glycol ether with glycerol (3:1)
(S) Fatty acids, castor-oil, esters with polyethylene glycol ether with glycerol (3:1)
(S) Fatty acids, sunflower-oil, esters with polyethylene glycol ether with glycerol (3:1)
(S) Fatty acids, hemp seedoil, esters with polyethylene glycol ether with glycerol (3:1)
6 and carwashing detergents P-16-0012
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0014
10/7/2015
1/5/2016
CBI
P-16-0017
10/8/2015
1/6/2016
Alcoa, Inc.
P-16-0018
10/9/2015
1/7/2016
CBI
P-16-0019
10/9/2015
1/7/2016
CBI
P-16-0020
10/9/2015
1/7/2016
CBI
P-16-0021
10/9/2015
1/7/2016
CBI
P-16-0022
10/15/2015
1/13/2016
CBI
P-16-0023
10/13/2015
1/11/2016
CBI
(S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (G) Ink additive
(S) Blast suppressor for nitrogen based fertilizers (G) Binders for fibrous materials (G) Binders for fibrous materials (G) Binders for fibrous materials (G) Component of soil improvement product (S) Reagent for production of metal salts(carboxylat es, for paint and ink dries, UPR promoters, lube/grease additives,fuel additives polymerization catalysts, specialty petrochemicals catalysts, etc. (S) Intermediate for epoxy curing
(S) Fatty acids, canola-oil, esters with polyethylene glycol ether with glycerol (3:1)
(G) Metalloid, tris[dialkyl phenyl]-dialkyl-dioxoalkanecarbopolycyclicdisulfonate (G) Mixed metals layered double hydroxide
(G) Polyethyleneglycol modified polyacrylate, compd. with alcohol amine (G) Polyethyleneglycol modified polyacrylate, compd. with alcohol amine (G) Polyethyleneglycol modified polyacrylate, compd. with alcohol amine (G) Polycarbomonocyclic carboxylic acid polyol, polymer with alkenoate and alkenoic acid (S) C10-C20 neo fatty acids
(G) 2-Propenenitrile, reaction products with
7 agent
polyalkylenepolyamine, hydrogenated (G) Silanediamine, N,N,N',N'tetraalkyl-
P-16-0024
10/13/2015
1/11/2016
CBI
P-16-0025
10/13/2015
1/11/2016
BASF CORPORATION
(G) Precursor for use in the electronics industry (G) Resin for use in electrocoats
P-16-0026
10/13/2015
1/11/2016
BASF CORPORATION
(G) Resin for use in electrocoats
(G) Amine functional epoxy, organic acid salt
P-16-0027
10/13/2015
1/11/2016
BASF Corporation
P-16-0028
10/13/2015
1/11/2016
BASF Corporation
(G) Resin for use in electrocoats (G) Resin for use in electrocoats
(G) Amine functional epoxy, organic acid salt (G) Amine functional epoxy, organic acid salt
P-16-0029
10/14/2015
1/12/2016
CBI
(G) Lubricant additive
P-16-0030
10/14/2015
1/12/2016
HENKEL Corporation
P-16-0031
10/15/2015
1/13/2016
CBI
P-16-0034
10/16/2015
1/14/2016
CARDOLITE Corporation
(G) A curing agent in anaerobic adhesive and sealant formulations (G) The polymeric material will be produced and sold to customers in pellet form, customer will then compound the polymer and impregnate it with various diffusible species (G) Cashew nutshell liquid based, 100% solids epoxy hardener for water borne epoxy coating formulations
(G) 2,5-Furandione, polymer with ethene and 1-propene, amine ether imide (S) 1,2cyclohexanedicarboxylic acid, 1-(2-phenylhydrazide)
(G) Amine functional epoxy
(G) Oxirane, alkyl hydroxypoly(oxy-1,2ethanediyl), alkyl bis[4isocyanatocyclohexane] and oxirane
(G) Cashew nutshell liquid polymer with epichlorhydrin, formaldehyde, phenol, amines and glycol
8 P-16-0035
10/16/2015
1/14/2016
CARDOLITE Corporation
P-16-0036
10/16/2015
1/14/2016
CBI
P-16-0038
10/19/2015
1/17/2016
Shin Etsu silicones of America
P-16-0039
10/20/2015
1/18/2016
CBI
P-16-0040
10/27/2015
1/25/2016
CBI
P-16-0041
10/21/2015
1/19/2016
CBI
P-16-0042
10/21/2015
1/19/2016
CBI
P-16-0043
10/22/2015
1/20/2016
Akzo Nobel Surface Chemistry, LLC
P-16-0044
10/30/2015
1/28/2016
CBI
P-16-0045
10/23/2015
1/21/2016
CBI
P-16-0046
10/28/2015
1/26/2016
CBI
P-16-0047
10/27/2015
1/25/2016
CBI
P-16-0047
10/27/2015
1/25/2016
CBI
(G) Cashew nutshell liquid based 100% solids epoxy hardener for higher solids epoxy coating formulation (G) Reactant used in polymer synthesis (G) The composition including the new chemical substance hardens by heating (G) Acrylic pressure sensitive adhesive (G) Polymer
(G) Cashew nutshell liquid polymer with amine and formaldehyde
(G) Additive, open, nondispersive use (G) Additive, open, nondispersive use (S) Polymeric corrosion inhibitor downhole oil field (G) Industrial coating (G) Fertilizer component (G) Use in laser marking additives for polyolefines (S) Modifier in composites (S) Parts and shapes process
(G) Alkohol alkoxylate
(G) Substituted heteropolycycle (G) Fluorined organopolysiloxane
(G) Alkyl acrylate-alkyl acrylamide copolymer
(G) Tar acids fraction
(G) Polyammonium salt of a fatty acid (S) Amines, tallow alkyl, ethoxylated, polymers with adipic acid
(G) Isocyanate functional urethane prepolymer (G) Sugar alcohol salt (G) Aromatic derivative, polymer with alkyl diol, alkene and oxiranylalkylalkyl-alkyl ester (G) Aromatic polyimide (G) Aromatic polyimide
9 by sintering P-16-0047
10/27/2015
1/25/2016
CBI
P-16-0047
10/27/2015
1/25/2016
CBI
P-16-0048
10/27/2015
1/25/2016
CBI
P-16-0048
10/27/2015
1/25/2016
CBI
(S) Parts and shapes (compounds) (S) Filler in thermoplastic or grease (S) Extrusion of tubing systems
(S) Injection molding of special applications
(G) Aromatic polyimide
(G) Aromatic polyimide
(G) Polyamide 6T/612 polymer of aliphatic/aromatic dicarboxylic acid and alkane diamine (G) Polyamide 6T/612 polymer of aliphatic/aromatic dicarboxylic acid and alkane diamine
For the 38 NOCs received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 2.–NOCs Received From October 1, 2015 to October 30, 2015 Case No. P-08-0029
Date Received 10/13/2015
Projected Date of Commencement 9/15/2015
P-11-0178
10/5/2015
9/18/2015
P-12-0450
10/1/2015
9/14/2015
P-13-0781 P-14-0284 P-14-0333 P-14-0483
10/1/2015 10/29/2015 10/13/2015 10/4/2015
9/29/2015 10/3/2015 10/5/2015 9/29/2015
Chemical Identity (G) Alkylated phenols (S) Hexane, 1,6-diisocyanato-, homopolymer, di-Et malonate- and 3,5-dimethyl-1H-pyrazole- blocked (G) Partially fluorinated alcohol, reaction products with phosphorus oxide (P2O5), amine salts (S) Benzene, (4-bromobutoxy)(G) Magenta dye (S) 2-Propenoic acid, heptadecyl ester, branched (G) Carbomonocyclic dicarboxylic acid, polymer with diisocyanatoalkane, alkyldiol, alkyldiol, alkanedioic acid, alkanediol, alkenoic acid and 1,3 isobenzofurandione, compd, with aminoalcohol
10 P-14-0523
10/9/2015
9/15/2015
P-14-0552
10/28/2015
10/16/2015
P-15-0054 P-15-0056 P-15-0076 P-15-0077 P-15-0078 P-15-0254 P-15-0255 P-15-0256 P-15-0257 P-15-0258 P-15-0260 P-15-0261 P-15-0262 P-15-0346 P-15-0393
10/28/2015 10/20/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/8/2015 10/16/2015
9/30/2015 9/30/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/2/2015 9/21/2015
P-15-0492 P-15-0507
10/13/2015 10/6/2015
9/15/2015 10/6/2015
P-15-0522 P-15-0523
10/20/2015 10/27/2015
10/15/2015 9/30/2015
P-15-0532
10/16/2015
10/2/2015
P-15-0533
10/16/2015
10/2/2015
P-15-0543 P-15-0559
10/1/2015 10/20/2015
9/18/2015 10/3/2015
P-15-0566
10/26/2015
9/29/2015
(G) Copolymers of perfluorinated and alkyl methacrylates (S) Poly(oxy-1,4-butanediyl), .alpha.-hydro.omega..-hydroxy-, polymer with .alpha.-hydro.omega.-hydroxypoly(oxy-1,2-ethanediyl) and 1,1'methylenebis[4-isocyanatocyclohexane] (G) Carbon nanotubes powder (S) Furan, 5-(hexyloxy)tetrahydro-2,2-dimethyl(G) Polyamic acid (G) Polyamic acid (G) Polyamid acid (G) Amic acid (G) Polyamic acid (G) Polyamic acid (G) Polyamic acid (G) Polyamic acid (G) Polyamic acid (G) Polyamid acid (G) Polyamic acid (G) Polyurethane adduct (G) Alkanedioic acid, polymer with alkanediol .alpha.-hydro-.omega.-hydroxypoly[oxy(alkyl)] and alkyl aromatic diisocyanate (G) Polymethylsiloxane, distillation residues (S) Borate(1-), tetrahydro-, sodium (1:1), reaction products with reduced polymd. oxidized tetrafluoroethylene, hydrolyzed, diallyl ethers, polymers with 2,4,6,8tetramethylcyclotetrasiloxane, si-(8,13-dioxo4,7,12-trioxa-9-azapentadec-14-1-yl) derivs (G) Metal, phthalocyaninato(2-)-, halogenated (G) Carbohydrates, polymer with amine compound (G) Substituted alkenoic acid, alkyl ester, polymer with substituted alkenoate and alkenoic acid, alkyl peroxide-initiated (G) Substituted heteropolycycle, polymer with substituted alkyldiols, and substututed heteropolycycle, substututed alkanoate (G) Phosphoric acid, mixed salt (G) Polymeric diphenylmethane diisocyanate prepolymer (G) Alkanedioic acid, polymer with substituted carbomonocycles, alkyl substituted alkanediol, substituted alkanoic acid, and substituted alkanediamine, substituted alkanamine-blocked,
11 compds. with alkylamine P-15-0588
10/27/2015
10/23/2015
P-15-0589
10/27/2015
10/23/2015
P-15-0598
10/21/2015
10/20/2015
P-15-0599 P-15-0600
10/26/2015 10/30/2015
10/23/2015 10/13/2015
(G) Alkenoic acid, polymer with substituted heteromonocycle, substituted carbomonocycle, 2alkyl-2-hydroxyalkyl-1,3-alkanediol 1-alkylalkenyl carbomonocycle, alkali metal salt (S) 2-Propenoic acid, polymer with 2(chloromethyl)oxirane, ethenylbenzene, 2-ethyl-2(hydroxymethyl)-1,3-propanediol and (1methylethenyl)benzene, potassium sodium salt (G) Substituted alkanoic acid, polymer with substituted polypropylene, substituted carbomonocyle, dialkyl carbonate, alkanediol and substituted carbopolycycle, compd. with dialkylamino alkanol (G) Hetero substituted alkyl acrylate polymer (G) Poly(hydroxyalkanoate)
Authority: 15 U.S.C. 2601 et seq. Dated: December 9, 2015.
Megan J. Carroll, Acting Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2015-31522 Filed: 12/14/2015 8:45 am; Publication Date: 12/15/2015]
BILLING CODE 6560-50-P
ENVIRONMENTAL PROTECTION AGENCY EPA-HQ-OPPT-2015-0505; FRL 9939-67] Certain New Chemicals; Receipt and Status Information for October 2015 AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from October 1, 2015 to October 30, 2015. DATES: Comments identified by the specific case number provided in this document, must be received on or before [insert date 30 days after date of publication in the Federal Register]. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT2015-0505, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods: • Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. • Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
15T-0325
2 • Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html. Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets. FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim Rahai, IMD (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: [email protected]. For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: [email protected]. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document. B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in
3 the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html. II. What Action is the Agency Taking? This document provides receipt and status reports, which cover the period from October 1, 2015 to October 30, 2015, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. What is the Agency's Authority for Taking this Action? Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA’s TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register
4 periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals. IV. Receipt and Status Reports As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI. For the 47 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the potential uses identified by the manufacturer/importer in the PMN; and the chemical identity.
Table 1.–PMNs Received From October 1, 2015 to October 30, 2015 Case No.
Date Received
Manufacturer/ Importer
10/30/2015
Projected End Date for EPA Review 1/28/2016
P-15-0769
P-16-0001
10/1/2015
12/30/2015
CBI
P-16-0002
10/1/2015
12/30/2015
P-16-0003
10/1/2015
12/30/2015
LUNA, Inc.
Use(s)
Chemical Identity
(S) Binder for protective coating (G) Catalyst production of industrial intermediates
(G) Polyurethane silane
Allnex USA, Inc.
(G) Adhesion promoting reactive binder
CBI
(G) Catalyst
(G) Substituted carbomonocycle, polymer with alkanediol, substitutedalkanediol, substituted heteropolycycle and heteropolycycle (G) Metal glycolate complex
(G) Hydrolytic enzymes
5 P-16-0004
10/1/2015
12/30/2015
CBI
(G) Catalyst
(G) Metal glycolate complex
P-16-0005
10/3/2015
1/1/2016
CBI
(G) Pigment formulation additive
(G) Alkyldioic acid, polymer with alkylamine, alkyldiol and 1,3-isobenzofurandione, reaction products with fatty acid
P-16-0006
10/6/2015
1/4/2016
CBI
(G) Additive used in inks
P-16-0007
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0008
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0009
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0010
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0011
10/6/2015
1/4/2016
Huntsman International, LLC
(S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (S) Foam stabilizer and rheology modifier in dishwashing
(G) Alkyl alkenoic acid, polymer with cycloalkyl alkyl alkenoate, substituted alkyl alkenoate, alkyl alkyl alkenoate and substituted alkyl alkenoate (S) Fatty acids, grape seed-oil, esters with polyethylene glycol ether with glycerol (3:1)
(S) Fatty acids, grape seed-oil, esters with polyethylene glycol ether with glycerol (3:1)
(S) Fatty acids, castor-oil, esters with polyethylene glycol ether with glycerol (3:1)
(S) Fatty acids, sunflower-oil, esters with polyethylene glycol ether with glycerol (3:1)
(S) Fatty acids, hemp seedoil, esters with polyethylene glycol ether with glycerol (3:1)
6 and carwashing detergents P-16-0012
10/6/2015
1/4/2016
Huntsman International, LLC
P-16-0014
10/7/2015
1/5/2016
CBI
P-16-0017
10/8/2015
1/6/2016
Alcoa, Inc.
P-16-0018
10/9/2015
1/7/2016
CBI
P-16-0019
10/9/2015
1/7/2016
CBI
P-16-0020
10/9/2015
1/7/2016
CBI
P-16-0021
10/9/2015
1/7/2016
CBI
P-16-0022
10/15/2015
1/13/2016
CBI
P-16-0023
10/13/2015
1/11/2016
CBI
(S) Foam stabilizer and rheology modifier in dishwashing and carwashing detergents (G) Ink additive
(S) Blast suppressor for nitrogen based fertilizers (G) Binders for fibrous materials (G) Binders for fibrous materials (G) Binders for fibrous materials (G) Component of soil improvement product (S) Reagent for production of metal salts(carboxylat es, for paint and ink dries, UPR promoters, lube/grease additives,fuel additives polymerization catalysts, specialty petrochemicals catalysts, etc. (S) Intermediate for epoxy curing
(S) Fatty acids, canola-oil, esters with polyethylene glycol ether with glycerol (3:1)
(G) Metalloid, tris[dialkyl phenyl]-dialkyl-dioxoalkanecarbopolycyclicdisulfonate (G) Mixed metals layered double hydroxide
(G) Polyethyleneglycol modified polyacrylate, compd. with alcohol amine (G) Polyethyleneglycol modified polyacrylate, compd. with alcohol amine (G) Polyethyleneglycol modified polyacrylate, compd. with alcohol amine (G) Polycarbomonocyclic carboxylic acid polyol, polymer with alkenoate and alkenoic acid (S) C10-C20 neo fatty acids
(G) 2-Propenenitrile, reaction products with
7 agent
polyalkylenepolyamine, hydrogenated (G) Silanediamine, N,N,N',N'tetraalkyl-
P-16-0024
10/13/2015
1/11/2016
CBI
P-16-0025
10/13/2015
1/11/2016
BASF CORPORATION
(G) Precursor for use in the electronics industry (G) Resin for use in electrocoats
P-16-0026
10/13/2015
1/11/2016
BASF CORPORATION
(G) Resin for use in electrocoats
(G) Amine functional epoxy, organic acid salt
P-16-0027
10/13/2015
1/11/2016
BASF Corporation
P-16-0028
10/13/2015
1/11/2016
BASF Corporation
(G) Resin for use in electrocoats (G) Resin for use in electrocoats
(G) Amine functional epoxy, organic acid salt (G) Amine functional epoxy, organic acid salt
P-16-0029
10/14/2015
1/12/2016
CBI
(G) Lubricant additive
P-16-0030
10/14/2015
1/12/2016
HENKEL Corporation
P-16-0031
10/15/2015
1/13/2016
CBI
P-16-0034
10/16/2015
1/14/2016
CARDOLITE Corporation
(G) A curing agent in anaerobic adhesive and sealant formulations (G) The polymeric material will be produced and sold to customers in pellet form, customer will then compound the polymer and impregnate it with various diffusible species (G) Cashew nutshell liquid based, 100% solids epoxy hardener for water borne epoxy coating formulations
(G) 2,5-Furandione, polymer with ethene and 1-propene, amine ether imide (S) 1,2cyclohexanedicarboxylic acid, 1-(2-phenylhydrazide)
(G) Amine functional epoxy
(G) Oxirane, alkyl hydroxypoly(oxy-1,2ethanediyl), alkyl bis[4isocyanatocyclohexane] and oxirane
(G) Cashew nutshell liquid polymer with epichlorhydrin, formaldehyde, phenol, amines and glycol
8 P-16-0035
10/16/2015
1/14/2016
CARDOLITE Corporation
P-16-0036
10/16/2015
1/14/2016
CBI
P-16-0038
10/19/2015
1/17/2016
Shin Etsu silicones of America
P-16-0039
10/20/2015
1/18/2016
CBI
P-16-0040
10/27/2015
1/25/2016
CBI
P-16-0041
10/21/2015
1/19/2016
CBI
P-16-0042
10/21/2015
1/19/2016
CBI
P-16-0043
10/22/2015
1/20/2016
Akzo Nobel Surface Chemistry, LLC
P-16-0044
10/30/2015
1/28/2016
CBI
P-16-0045
10/23/2015
1/21/2016
CBI
P-16-0046
10/28/2015
1/26/2016
CBI
P-16-0047
10/27/2015
1/25/2016
CBI
P-16-0047
10/27/2015
1/25/2016
CBI
(G) Cashew nutshell liquid based 100% solids epoxy hardener for higher solids epoxy coating formulation (G) Reactant used in polymer synthesis (G) The composition including the new chemical substance hardens by heating (G) Acrylic pressure sensitive adhesive (G) Polymer
(G) Cashew nutshell liquid polymer with amine and formaldehyde
(G) Additive, open, nondispersive use (G) Additive, open, nondispersive use (S) Polymeric corrosion inhibitor downhole oil field (G) Industrial coating (G) Fertilizer component (G) Use in laser marking additives for polyolefines (S) Modifier in composites (S) Parts and shapes process
(G) Alkohol alkoxylate
(G) Substituted heteropolycycle (G) Fluorined organopolysiloxane
(G) Alkyl acrylate-alkyl acrylamide copolymer
(G) Tar acids fraction
(G) Polyammonium salt of a fatty acid (S) Amines, tallow alkyl, ethoxylated, polymers with adipic acid
(G) Isocyanate functional urethane prepolymer (G) Sugar alcohol salt (G) Aromatic derivative, polymer with alkyl diol, alkene and oxiranylalkylalkyl-alkyl ester (G) Aromatic polyimide (G) Aromatic polyimide
9 by sintering P-16-0047
10/27/2015
1/25/2016
CBI
P-16-0047
10/27/2015
1/25/2016
CBI
P-16-0048
10/27/2015
1/25/2016
CBI
P-16-0048
10/27/2015
1/25/2016
CBI
(S) Parts and shapes (compounds) (S) Filler in thermoplastic or grease (S) Extrusion of tubing systems
(S) Injection molding of special applications
(G) Aromatic polyimide
(G) Aromatic polyimide
(G) Polyamide 6T/612 polymer of aliphatic/aromatic dicarboxylic acid and alkane diamine (G) Polyamide 6T/612 polymer of aliphatic/aromatic dicarboxylic acid and alkane diamine
For the 38 NOCs received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity. Table 2.–NOCs Received From October 1, 2015 to October 30, 2015 Case No. P-08-0029
Date Received 10/13/2015
Projected Date of Commencement 9/15/2015
P-11-0178
10/5/2015
9/18/2015
P-12-0450
10/1/2015
9/14/2015
P-13-0781 P-14-0284 P-14-0333 P-14-0483
10/1/2015 10/29/2015 10/13/2015 10/4/2015
9/29/2015 10/3/2015 10/5/2015 9/29/2015
Chemical Identity (G) Alkylated phenols (S) Hexane, 1,6-diisocyanato-, homopolymer, di-Et malonate- and 3,5-dimethyl-1H-pyrazole- blocked (G) Partially fluorinated alcohol, reaction products with phosphorus oxide (P2O5), amine salts (S) Benzene, (4-bromobutoxy)(G) Magenta dye (S) 2-Propenoic acid, heptadecyl ester, branched (G) Carbomonocyclic dicarboxylic acid, polymer with diisocyanatoalkane, alkyldiol, alkyldiol, alkanedioic acid, alkanediol, alkenoic acid and 1,3 isobenzofurandione, compd, with aminoalcohol
10 P-14-0523
10/9/2015
9/15/2015
P-14-0552
10/28/2015
10/16/2015
P-15-0054 P-15-0056 P-15-0076 P-15-0077 P-15-0078 P-15-0254 P-15-0255 P-15-0256 P-15-0257 P-15-0258 P-15-0260 P-15-0261 P-15-0262 P-15-0346 P-15-0393
10/28/2015 10/20/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/22/2015 10/8/2015 10/16/2015
9/30/2015 9/30/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/6/2015 10/2/2015 9/21/2015
P-15-0492 P-15-0507
10/13/2015 10/6/2015
9/15/2015 10/6/2015
P-15-0522 P-15-0523
10/20/2015 10/27/2015
10/15/2015 9/30/2015
P-15-0532
10/16/2015
10/2/2015
P-15-0533
10/16/2015
10/2/2015
P-15-0543 P-15-0559
10/1/2015 10/20/2015
9/18/2015 10/3/2015
P-15-0566
10/26/2015
9/29/2015
(G) Copolymers of perfluorinated and alkyl methacrylates (S) Poly(oxy-1,4-butanediyl), .alpha.-hydro.omega..-hydroxy-, polymer with .alpha.-hydro.omega.-hydroxypoly(oxy-1,2-ethanediyl) and 1,1'methylenebis[4-isocyanatocyclohexane] (G) Carbon nanotubes powder (S) Furan, 5-(hexyloxy)tetrahydro-2,2-dimethyl(G) Polyamic acid (G) Polyamic acid (G) Polyamid acid (G) Amic acid (G) Polyamic acid (G) Polyamic acid (G) Polyamic acid (G) Polyamic acid (G) Polyamic acid (G) Polyamid acid (G) Polyamic acid (G) Polyurethane adduct (G) Alkanedioic acid, polymer with alkanediol .alpha.-hydro-.omega.-hydroxypoly[oxy(alkyl)] and alkyl aromatic diisocyanate (G) Polymethylsiloxane, distillation residues (S) Borate(1-), tetrahydro-, sodium (1:1), reaction products with reduced polymd. oxidized tetrafluoroethylene, hydrolyzed, diallyl ethers, polymers with 2,4,6,8tetramethylcyclotetrasiloxane, si-(8,13-dioxo4,7,12-trioxa-9-azapentadec-14-1-yl) derivs (G) Metal, phthalocyaninato(2-)-, halogenated (G) Carbohydrates, polymer with amine compound (G) Substituted alkenoic acid, alkyl ester, polymer with substituted alkenoate and alkenoic acid, alkyl peroxide-initiated (G) Substituted heteropolycycle, polymer with substituted alkyldiols, and substututed heteropolycycle, substututed alkanoate (G) Phosphoric acid, mixed salt (G) Polymeric diphenylmethane diisocyanate prepolymer (G) Alkanedioic acid, polymer with substituted carbomonocycles, alkyl substituted alkanediol, substituted alkanoic acid, and substituted alkanediamine, substituted alkanamine-blocked,
11 compds. with alkylamine P-15-0588
10/27/2015
10/23/2015
P-15-0589
10/27/2015
10/23/2015
P-15-0598
10/21/2015
10/20/2015
P-15-0599 P-15-0600
10/26/2015 10/30/2015
10/23/2015 10/13/2015
(G) Alkenoic acid, polymer with substituted heteromonocycle, substituted carbomonocycle, 2alkyl-2-hydroxyalkyl-1,3-alkanediol 1-alkylalkenyl carbomonocycle, alkali metal salt (S) 2-Propenoic acid, polymer with 2(chloromethyl)oxirane, ethenylbenzene, 2-ethyl-2(hydroxymethyl)-1,3-propanediol and (1methylethenyl)benzene, potassium sodium salt (G) Substituted alkanoic acid, polymer with substituted polypropylene, substituted carbomonocyle, dialkyl carbonate, alkanediol and substituted carbopolycycle, compd. with dialkylamino alkanol (G) Hetero substituted alkyl acrylate polymer (G) Poly(hydroxyalkanoate)
Authority: 15 U.S.C. 2601 et seq. Dated: December 9, 2015.
Megan J. Carroll, Acting Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 2015-31522 Filed: 12/14/2015 8:45 am; Publication Date: 12/15/2015]
