Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder

Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement

Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement If accessory holder breaks, this guide will help you to replace the holder.

作成者: Celina Burchett

© iFixit — CC BY-NC-SA

jp.iFixit.com

å…¨4 ページ分ã​® 1ページ目

Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement

はじめに If the accessory holder is no longer able to hold the multiple tools associated with the vacuum, this guide outlines the its replacement.

ツール: T15 Security Torx Screwdriver (1)

© iFixit — CC BY-NC-SA

jp.iFixit.com

å…¨4 ページ分ã​® 2ページ目

Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement

手順 1 — Hose



On the back of the vacuum, pull the handle connected to the hose away from the vacuum.

手順 2



Grasp the thick smooth collar at the bottom of the hose and twist left (counterclockwise) to remove the hose.

© iFixit — CC BY-NC-SA

jp.iFixit.com

å…¨4 ページ分ã​® 3ページ目

Eureka AirSpeed Bagless Zuum Vacuum Accessory Holder Replacement

手順 3 — Accessory Holder 

Using a T15 Torx Security Screwdriver, remove the screw on each side of the indention in which the hose normally rests.



Upon removal of the two screws, the accessory holder can be removed from the vacuum body.

手順 4

To reassemble your device, follow these instructions in reverse order. この文書の最終更新日は 2017-09-09 11:00:10 PMです。

© iFixit — CC BY-NC-SA

jp.iFixit.com

å…¨4 ページ分ã​® 4ページ目