FEATURES & SPECIFICATIONS ORDERING INFORMATION
Catalog Number
Notes
Type
FEATURES & SPECIFICATIONS INTENDED USE — For walkways, plazas or pedestrian areas. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
Architectural Bollards
KBS6
CONSTRUCTION — Extruded, one-piece aluminum, 0.188" wall thickness. Top cover is a weldment of .188" wall extrusion and 0.250" top plate. 42" overall height standard. Closed-cell EPDM gasketing is included. FINISH — Standard finish is dark bronze (DDB) polyester powder, electrostatically-applied and oven-cured. Other colors available as options. OPTICAL SYSTEM — Hydroformed, fluted, anodized, aluminum upper reflector combined with spun aluminum, anodized, flared cone is standard. Cylindrical lower reflectors also available. Lens is clear, 100% virgin acrylic, 1/4" wall, flush fitting. ELECTRICAL SYSTEM — High pressure sodium and metal halide are high power factor ballasts, 100% factory tested for reliable operation. Electrical components are tray-mounted with quick-disconnect plug and are accessible through bottom of the bollard. Porcelain, vertically-oriented, medium-base pulse-rated socket with copper alloy nickel-plated shell and center contact.
6" SQUARE High Pressure Sodium Metal Halide Incandescent
INSTALLATION — Four 1/2" x 11" with double nuts and washers, (shipped separately). 4-1/2" bolt circle template included. LISTING — UL listed for wet locations. Listed and labeled to comply with Canadian Standards (see Options). Weight: 23.9-33.2 lbs (10.8-15.1 kgs)
For shortest lead times, configure products using bolded options. Example: KBS6 70M R5 120 SF LPI
ORDERING INFORMATION
KBS6 Series
KBS6
Wattage 35S 50S 70S 50M
35W 50W 70W 50W
HPS1 HPS HPS MH2
70M 70W MH2 I 116W/TS (maximum) 1
Reflector Standard flared cone
R5 Type V distribution Optional cylindrical reflectors CYA Specular CYB Black CYG Gold CYF Flat black
Lamp not included.
Accessories Field-installed. Order as separate catalog number.
S6S Half-shield for 6" square
Voltage
Options
120
Shipped installed in fixture Architectural colors (powder 5 SF Single fuse (120, 277, 347V only, finish) not available with TB) Standard colors DF Double fuse (208, 240 only, not (blank) Dark bronze available with TB) (standard)
208 240
277 3473 TB4
LPI Lamp included as standard L/LP Less lamp H24 H30 H36 FD FG XT CR
Overall height 24" Overall height 30" Overall height 36" Festoon outlet Ground-fault festoon outlet Diode (incandescent only) Enhanced corrosion resistance
CSA Listed and labeled to comply with Canadian Standards (120, 277, 347V only)
DWH White DBL Black Classic colors DMB Medium bronze
DNA Natural aluminum DSS DGC DTG DBR DSB
Sandstone Charcoal gray Tennis green Bright red Steel blue
NOTES: 1 35S and incandescent available in 120V only. 2 Use coated lamp with metal halide sources. 3 347V available in 70S only. 4 Optional multi-tap ballast (120, 208, 240, 277V). 5 Additional architectural colors available; see Architectural Colors brochure form no. 794.3.
Outdoor
Sheet #: KBS6-S-M-I
SL-600
KBS6 6” Square Bollard PHOTOMETRICS The charts below provide the most useful data from photometric tests of specific lamp/luminaire combinations. For complete results of any combination shown, or other requirements, contact your LITHONIA representative.
70S 50S 35S 6300 4000 2250 Lumens
70M 5500 0
0
3
3
11.8 7.5 4.2 7.9 5.0 2.8 3.9 2.5 1.4
6 9
1.6 1.0 0.56 12
0.79 0.50 0.28 0.39 0.25 0.14
50M 3400 Lumens
15
5.0
3.1
6
2.5
1.5
9
1.0
0.62
0.50
0.31
0.25
0.15
12 15
18
18
21 0 116/TS 1280
3
6
12
9
15
18
21
0
3
6
9
21 12
15
18
21
Lumens
0 3 1 6 .5
9
.25
12 15
18 21 0
3
6
9
12
15
18
21
NOTES: 1 2
For electrical characteristics, consult technical data tab. Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements. Dimensions and specifications are based on the most current available data and are subject to change.
Lithonia Lighting
Sheet #: KBS6-S-M-I
©1994-2010 Acuity Brands Lighting, Inc. All rights reserved. Rev. 2/17/10
Outdoor One Lithonia Way, Conyers, GA 30012 Phone: 770-922-9000 Fax: 770-918-1209 www.lithonia.com
Notes
Type
FEATURES & SPECIFICATIONS INTENDED USE — For walkways, plazas or pedestrian areas. Certain airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility table for suitable uses.
Architectural Bollards
KBS6
CONSTRUCTION — Extruded, one-piece aluminum, 0.188" wall thickness. Top cover is a weldment of .188" wall extrusion and 0.250" top plate. 42" overall height standard. Closed-cell EPDM gasketing is included. FINISH — Standard finish is dark bronze (DDB) polyester powder, electrostatically-applied and oven-cured. Other colors available as options. OPTICAL SYSTEM — Hydroformed, fluted, anodized, aluminum upper reflector combined with spun aluminum, anodized, flared cone is standard. Cylindrical lower reflectors also available. Lens is clear, 100% virgin acrylic, 1/4" wall, flush fitting. ELECTRICAL SYSTEM — High pressure sodium and metal halide are high power factor ballasts, 100% factory tested for reliable operation. Electrical components are tray-mounted with quick-disconnect plug and are accessible through bottom of the bollard. Porcelain, vertically-oriented, medium-base pulse-rated socket with copper alloy nickel-plated shell and center contact.
6" SQUARE High Pressure Sodium Metal Halide Incandescent
INSTALLATION — Four 1/2" x 11" with double nuts and washers, (shipped separately). 4-1/2" bolt circle template included. LISTING — UL listed for wet locations. Listed and labeled to comply with Canadian Standards (see Options). Weight: 23.9-33.2 lbs (10.8-15.1 kgs)
For shortest lead times, configure products using bolded options. Example: KBS6 70M R5 120 SF LPI
ORDERING INFORMATION
KBS6 Series
KBS6
Wattage 35S 50S 70S 50M
35W 50W 70W 50W
HPS1 HPS HPS MH2
70M 70W MH2 I 116W/TS (maximum) 1
Reflector Standard flared cone
R5 Type V distribution Optional cylindrical reflectors CYA Specular CYB Black CYG Gold CYF Flat black
Lamp not included.
Accessories Field-installed. Order as separate catalog number.
S6S Half-shield for 6" square
Voltage
Options
120
Shipped installed in fixture Architectural colors (powder 5 SF Single fuse (120, 277, 347V only, finish) not available with TB) Standard colors DF Double fuse (208, 240 only, not (blank) Dark bronze available with TB) (standard)
208 240
277 3473 TB4
LPI Lamp included as standard L/LP Less lamp H24 H30 H36 FD FG XT CR
Overall height 24" Overall height 30" Overall height 36" Festoon outlet Ground-fault festoon outlet Diode (incandescent only) Enhanced corrosion resistance
CSA Listed and labeled to comply with Canadian Standards (120, 277, 347V only)
DWH White DBL Black Classic colors DMB Medium bronze
DNA Natural aluminum DSS DGC DTG DBR DSB
Sandstone Charcoal gray Tennis green Bright red Steel blue
NOTES: 1 35S and incandescent available in 120V only. 2 Use coated lamp with metal halide sources. 3 347V available in 70S only. 4 Optional multi-tap ballast (120, 208, 240, 277V). 5 Additional architectural colors available; see Architectural Colors brochure form no. 794.3.
Outdoor
Sheet #: KBS6-S-M-I
SL-600
KBS6 6” Square Bollard PHOTOMETRICS The charts below provide the most useful data from photometric tests of specific lamp/luminaire combinations. For complete results of any combination shown, or other requirements, contact your LITHONIA representative.
70S 50S 35S 6300 4000 2250 Lumens
70M 5500 0
0
3
3
11.8 7.5 4.2 7.9 5.0 2.8 3.9 2.5 1.4
6 9
1.6 1.0 0.56 12
0.79 0.50 0.28 0.39 0.25 0.14
50M 3400 Lumens
15
5.0
3.1
6
2.5
1.5
9
1.0
0.62
0.50
0.31
0.25
0.15
12 15
18
18
21 0 116/TS 1280
3
6
12
9
15
18
21
0
3
6
9
21 12
15
18
21
Lumens
0 3 1 6 .5
9
.25
12 15
18 21 0
3
6
9
12
15
18
21
NOTES: 1 2
For electrical characteristics, consult technical data tab. Tested to current IES and NEMA standards under stabilized laboratory conditions. Various operating factors can cause differences between laboratory data and actual field measurements. Dimensions and specifications are based on the most current available data and are subject to change.
Lithonia Lighting
Sheet #: KBS6-S-M-I
©1994-2010 Acuity Brands Lighting, Inc. All rights reserved. Rev. 2/17/10
Outdoor One Lithonia Way, Conyers, GA 30012 Phone: 770-922-9000 Fax: 770-918-1209 www.lithonia.com
