Fiber Optic Wall Mount Enclosure, 2-Panel, Dual Doors
Fiber Optic Wall Mount Enclosure, 2-Panel, Dual Doors I
N
S
T A
L
L
A T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
Cable Management
Screws
Lockable Door
Step 1. Open the enclosure by unlatching the outer door and opening the lockable inner door, and then remove the hardware.
Step 2. Mount the enclosure to a wall. Note: Screws are not included.
Velcro Tie
Step 3. Apply danger and circuit identification label in the designated locations shown. Note: Cut knockout seals to allow cables to enter and exit the enclosure.
Step 4. Apply Velcro® tie loops inside the enclosure.
Door Latch
Hasp Optional Padded Lock
Step 5. Install fiber optic adapter panels and cables.
888-ASK-4ICC
Step 6. Lock the inner door using the key and cam lock. Finally, close and secure the outer door by sliding the door latch. Note: Use an optional padded lock to secure outer door for additional security.
[email protected]
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. LGX is a registered trademark of OFS FITEL, LLC.
icc.com MSR-0403-Rev.D
Fiber Optic Wall Mount Enclosure, 2-Panel, Dual Doors I N
S
T A
L
L
A T
I
O
A
N
I
N
S
T
R
U
C
T
I
O
N
S
I H
D C E
B G F
ICFOD202BK A Fiber Optic Enclosure, 1 piece B Cable Ties, 2 pieces C Keys, 2 pieces D Circuit Identification Label, 1 piece E Danger Label, 1 piece
F
E
A T
F Velcro® Tie Loops, 2 pieces G Door Latch (pre-assembled), 1 piece H Cable Management Spool (pre-assembled), 1 piece I Knockout Seals (pre-assembled), 4 pieces
U
R
E
S
A
N
D
A C
C
B
E
N
E
F
I
T
S
S
O
R
I
E
S
S
• Enclosure is designed to be wall mounted • Comes with a lockable inner doors to prevent unwanted access • Adjustable cable management spool comes pre-assembled • Made of durable 18 gauge steel with a black powder coated finish • Configure with two LGX compatible fiber optic adapter panels • 10.2” H x 12” W x 3.5” D
O
LC Fiber MPO Plug & Play Cassettes • 10G 50/125um (OM3) • Multimode, metal sleeves • Factory terminated and tested • Test results are included ICFC24ML1G ICFC12ML1G
P
T
I
O
N
A
L
LC Quad Fiber Adapter • 6-Quad LC adapters • Supports up to 24-fibers • Multimode, metal sleeves ICFOPL161G
10G aqua
E
LC Fiber Adapter Panels • 6-Duplex LC adapters • Supports up to 12-fibers • Multimode / Single-mode • Ceramic sleeves ICFOPL16BK
12-LC duplex 6-LC duplex
Blue
SC Fiber Adapter Panels • 6-Duplex SC adapters • Supports up to 12-fibers ICFOPC16BK Blue • Multimode, metal sleeves ICFOPC26BK Blue • Multimode / Single-mode • Ceramic sleeves
888-ASK-4ICC
[email protected]
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. LGX is a registered trademark of OFS FITEL, LLC.
icc.com MSR-0403-Rev.D
N
S
T A
L
L
A T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
Cable Management
Screws
Lockable Door
Step 1. Open the enclosure by unlatching the outer door and opening the lockable inner door, and then remove the hardware.
Step 2. Mount the enclosure to a wall. Note: Screws are not included.
Velcro Tie
Step 3. Apply danger and circuit identification label in the designated locations shown. Note: Cut knockout seals to allow cables to enter and exit the enclosure.
Step 4. Apply Velcro® tie loops inside the enclosure.
Door Latch
Hasp Optional Padded Lock
Step 5. Install fiber optic adapter panels and cables.
888-ASK-4ICC
Step 6. Lock the inner door using the key and cam lock. Finally, close and secure the outer door by sliding the door latch. Note: Use an optional padded lock to secure outer door for additional security.
[email protected]
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. LGX is a registered trademark of OFS FITEL, LLC.
icc.com MSR-0403-Rev.D
Fiber Optic Wall Mount Enclosure, 2-Panel, Dual Doors I N
S
T A
L
L
A T
I
O
A
N
I
N
S
T
R
U
C
T
I
O
N
S
I H
D C E
B G F
ICFOD202BK A Fiber Optic Enclosure, 1 piece B Cable Ties, 2 pieces C Keys, 2 pieces D Circuit Identification Label, 1 piece E Danger Label, 1 piece
F
E
A T
F Velcro® Tie Loops, 2 pieces G Door Latch (pre-assembled), 1 piece H Cable Management Spool (pre-assembled), 1 piece I Knockout Seals (pre-assembled), 4 pieces
U
R
E
S
A
N
D
A C
C
B
E
N
E
F
I
T
S
S
O
R
I
E
S
S
• Enclosure is designed to be wall mounted • Comes with a lockable inner doors to prevent unwanted access • Adjustable cable management spool comes pre-assembled • Made of durable 18 gauge steel with a black powder coated finish • Configure with two LGX compatible fiber optic adapter panels • 10.2” H x 12” W x 3.5” D
O
LC Fiber MPO Plug & Play Cassettes • 10G 50/125um (OM3) • Multimode, metal sleeves • Factory terminated and tested • Test results are included ICFC24ML1G ICFC12ML1G
P
T
I
O
N
A
L
LC Quad Fiber Adapter • 6-Quad LC adapters • Supports up to 24-fibers • Multimode, metal sleeves ICFOPL161G
10G aqua
E
LC Fiber Adapter Panels • 6-Duplex LC adapters • Supports up to 12-fibers • Multimode / Single-mode • Ceramic sleeves ICFOPL16BK
12-LC duplex 6-LC duplex
Blue
SC Fiber Adapter Panels • 6-Duplex SC adapters • Supports up to 12-fibers ICFOPC16BK Blue • Multimode, metal sleeves ICFOPC26BK Blue • Multimode / Single-mode • Ceramic sleeves
888-ASK-4ICC
[email protected]
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. LGX is a registered trademark of OFS FITEL, LLC.
icc.com MSR-0403-Rev.D
