Fiber Optic Wall Mount Enclosure, 4-Panel, Dual Doors
Fiber Optic Wall Mount Enclosure, 4-Panel, Dual Doors I
N
S
T A
L
L
A T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
Key Lock
Right Door
Step 1. Open the enclosure by unlatching the left and right doors, and then remove the hardware.
Screws
Step 2. Mount the enclosure to a wall. Note: Screws are not included.
Velcro Tie Loops
Cable Management Spools
Step 3. Apply the danger and circuit identification labels in the designated locations shown. Then install the cable management spools into the enclosure. Note: Cut knockout seals to allow cables to enter and exit the enclosure.
Step 4. Apply Velcro® tie loops inside the enclosure.
Optional Padded Lock
Step 5. Install fiber optic adapter panels and cables. For armored cable, attach the grounding lug to the cable strain relief bracket using the 1/4-20 locknut.
888-ASK-4ICC
Step 6. Use the latch to close the right door. Finally, close and lock the outer door using the key. Note: Use an optional padded lock to secure outer door for additional security.
[email protected]
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. LGX is a registered trademark of OFS FITEL, LLC.
icc.com MSR-0402-Rev.E
Fiber Optic Wall Mount Enclosure, 4-Panel, Dual Doors I
N
S
T A
L
L
A T
I
O
N
I
N
S
T
R
U
A
C
T
I
O
N
S
B
E
C G
M F
D
L
H
I
N J
ICFOD204BK A Fiber Optic Enclosure, 1 piece
H 1/4-20 x 1/2 Pem Stud, 1 piece
B Knockout Seals (pre-assembled), 4 pieces
I #10-32 Locknuts, 4 pieces
C Cable Management Spools, 2 pieces
J #10-32 x 3/8 Pem Studs, 4 pieces
D Velcro® Tie Loops, 2 pieces
K Key Lock (pre-assembled), 1 piece L Keys, 2 pieces
E Cable Ties, 4 pieces F Grounding Lug, 1 piece
M Circuit Identification Label, 1 piece
G 1/4-20 Locknut, 1 piece
N Danger Label, 1 piece
F
E
A T
U
R
E
S
A
N
D
A C
C
B
E
N
E
F
I
T
S
S
O
R
I
E
S
S
• Enclosure is designed to be wall mounted • Adjustable cable management spool comes pre-assembled • Made of durable 18 gauge steel with a black powder coated finish • Configure with four LGX compatible fiber optic adapter panels • 10.8” H x 12” W x 4” D
O
LC Fiber MPO Plug & Play Cassettes • 10G 50/125um (OM3) • Multimode, metal sleeves • Factory terminated and tested • Test results are included ICFC24ML1G ICFC12ML1G
P
T
I
O
N
A
L
LC Quad Fiber Adapter • 6-Quad LC adapters • Supports up to 24-fibers • Multimode, metal sleeves ICFOPL161G
10G aqua
E
LC Fiber Adapter Panels • 6-Duplex LC adapters • Supports up to 12-fibers • Multimode / Single-mode • Ceramic sleeves ICFOPL16BK
12-LC duplex 6-LC duplex
Blue
SC Fiber Adapter Panels • 6-Duplex SC adapters • Supports up to 12-fibers ICFOPC16BK Blue • Multimode, metal sleeves ICFOPC26BK Blue • Multimode / Single-mode • Ceramic sleeves
888-ASK-4ICC
[email protected]
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. LGX is a registered trademark of OFS FITEL, LLC.
icc.com MSR-0402-Rev.E
N
S
T A
L
L
A T
I
O
N
I
N
S
T
R
U
C
T
I
O
N
S
Key Lock
Right Door
Step 1. Open the enclosure by unlatching the left and right doors, and then remove the hardware.
Screws
Step 2. Mount the enclosure to a wall. Note: Screws are not included.
Velcro Tie Loops
Cable Management Spools
Step 3. Apply the danger and circuit identification labels in the designated locations shown. Then install the cable management spools into the enclosure. Note: Cut knockout seals to allow cables to enter and exit the enclosure.
Step 4. Apply Velcro® tie loops inside the enclosure.
Optional Padded Lock
Step 5. Install fiber optic adapter panels and cables. For armored cable, attach the grounding lug to the cable strain relief bracket using the 1/4-20 locknut.
888-ASK-4ICC
Step 6. Use the latch to close the right door. Finally, close and lock the outer door using the key. Note: Use an optional padded lock to secure outer door for additional security.
[email protected]
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. LGX is a registered trademark of OFS FITEL, LLC.
icc.com MSR-0402-Rev.E
Fiber Optic Wall Mount Enclosure, 4-Panel, Dual Doors I
N
S
T A
L
L
A T
I
O
N
I
N
S
T
R
U
A
C
T
I
O
N
S
B
E
C G
M F
D
L
H
I
N J
ICFOD204BK A Fiber Optic Enclosure, 1 piece
H 1/4-20 x 1/2 Pem Stud, 1 piece
B Knockout Seals (pre-assembled), 4 pieces
I #10-32 Locknuts, 4 pieces
C Cable Management Spools, 2 pieces
J #10-32 x 3/8 Pem Studs, 4 pieces
D Velcro® Tie Loops, 2 pieces
K Key Lock (pre-assembled), 1 piece L Keys, 2 pieces
E Cable Ties, 4 pieces F Grounding Lug, 1 piece
M Circuit Identification Label, 1 piece
G 1/4-20 Locknut, 1 piece
N Danger Label, 1 piece
F
E
A T
U
R
E
S
A
N
D
A C
C
B
E
N
E
F
I
T
S
S
O
R
I
E
S
S
• Enclosure is designed to be wall mounted • Adjustable cable management spool comes pre-assembled • Made of durable 18 gauge steel with a black powder coated finish • Configure with four LGX compatible fiber optic adapter panels • 10.8” H x 12” W x 4” D
O
LC Fiber MPO Plug & Play Cassettes • 10G 50/125um (OM3) • Multimode, metal sleeves • Factory terminated and tested • Test results are included ICFC24ML1G ICFC12ML1G
P
T
I
O
N
A
L
LC Quad Fiber Adapter • 6-Quad LC adapters • Supports up to 24-fibers • Multimode, metal sleeves ICFOPL161G
10G aqua
E
LC Fiber Adapter Panels • 6-Duplex LC adapters • Supports up to 12-fibers • Multimode / Single-mode • Ceramic sleeves ICFOPL16BK
12-LC duplex 6-LC duplex
Blue
SC Fiber Adapter Panels • 6-Duplex SC adapters • Supports up to 12-fibers ICFOPC16BK Blue • Multimode, metal sleeves ICFOPC26BK Blue • Multimode / Single-mode • Ceramic sleeves
888-ASK-4ICC
[email protected]
© Copyright 2012, ICC. ICC and ICC logo are registered trade name and trademark. All rights reserved. LGX is a registered trademark of OFS FITEL, LLC.
icc.com MSR-0402-Rev.E
