Fold Supplies Needed:
Supplies Needed: | One Felt Square (9 x 12”) | Decorative & Coordinating Thread Fold felt square in half. Pin mitten pattern onto felt square and cut out two pieces. This will be the front and back of the mitten.
| Embroidery Floss | Bell
Fold
Select a decorative stitch on your machine. Ignoring the thumb, find the center of the mitten. On the front side of the mitten, begin sewing decorative stitch 1 1/2” from the top of mitten, ending 1/4” from the bottom. Place right sides together. Sew together with a 1/8” seam allowance. Anything larger with cause too much bulk when you turn the mitten right side out Carefully snip to the sew line, but do not cut through the seam between thumb and finger section. This will allow the mitten to lie flat when turned right side out. Turn right side out and fold down the top of the mitten to form a cuff. Sew on the bell and loop by hand. Your mitten is ready to be hung!!!
| Embroidery Floss | Bell
Fold
Select a decorative stitch on your machine. Ignoring the thumb, find the center of the mitten. On the front side of the mitten, begin sewing decorative stitch 1 1/2” from the top of mitten, ending 1/4” from the bottom. Place right sides together. Sew together with a 1/8” seam allowance. Anything larger with cause too much bulk when you turn the mitten right side out Carefully snip to the sew line, but do not cut through the seam between thumb and finger section. This will allow the mitten to lie flat when turned right side out. Turn right side out and fold down the top of the mitten to form a cuff. Sew on the bell and loop by hand. Your mitten is ready to be hung!!!
