Fujifilm FinePix S2980 Speaker Replacement

Report 2 Downloads 95 Views
Fujifilm FinePix S2980 Speaker Replacement

Fujifilm FinePix S2980 Speaker Replacement Use this guide to replace the speaker in your Fujifilm FinePix S2980 camera.

Written By: diane heidke

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 6

Fujifilm FinePix S2980 Speaker Replacement

INTRODUCTION Outline what you are going to teach someone how to do.

TOOLS: Phillips #0 Screwdriver (1) iFixit Opening Tools (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 6

Fujifilm FinePix S2980 Speaker Replacement

Step 1 — LCD Screen



Use a PH0 screwdriver to remove four screws on the right side, three screws on the bottom, and four on the left side to take off the rear plate.

Step 2



Remove the three screws holding the LCD screen in place.



Replace with new screen.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 6

Fujifilm FinePix S2980 Speaker Replacement

Step 3 — Speaker



Remove the two screws from underneath the flash mechanism.



Remove the two screws placed on the right and left sides of the camera.

Step 4 

© iFixit — CC BY-NC-SA

www.iFixit.com

Use the opening tool to pry the top plate off of the top of the camera.

Page 4 of 6

Fujifilm FinePix S2980 Speaker Replacement

Step 5



Remove the four larger silver plated screws placed on the inside of the lens.



Remove the lens by lifting it up from the cavity.

Step 6



Remove the five bracket screws.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 6

Fujifilm FinePix S2980 Speaker Replacement

Step 7



Once the screws are out, remove the the bracket



Remove speaker with given tweezer tool and replace

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-16 03:34:58 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 6 of 6