Graco Secure Coverage Nursery Unit Battery Replacement

Report 3 Downloads 43 Views
Graco Secure Coverage Nursery Unit Battery Replacement

Graco Secure Coverage Nursery Unit Battery Replacement With this guide, you will be able to replace the battery on both units.

Written By: Rogelio Morales

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 3

Graco Secure Coverage Nursery Unit Battery Replacement

INTRODUCTION Use this guide to replace the battery on your Graco Secure Coverage Digital Baby Monitor for nursery unit. The battery replacement includes the battery replacement.

TOOLS: Phillips #1 Screwdriver (1) iFixit Opening Tools (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 3

Graco Secure Coverage Nursery Unit Battery Replacement

Step 1 — Nursery Unit Battery



Remove the 9mm screw from the battery cover of the nursery unit using a Phillips #1 tip screwdriver.

Step 2



Using the plastic opening tool, pry and remove the battery cover carefully.



Remove the batteries using plastic opening tool.



Replace the batteries.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-17 10:19:23 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 3