Hamilton Beach 70740 Base Removal AWS

Hamilton Beach 70740 Base Removal

Hamilton Beach 70740 Base Removal This guide will show you how to remove the base of your food processor.

撰写者: David Gedeon

© iFixit — CC BY-NC-SA

zh.iFixit.com

1 / 5 页

Hamilton Beach 70740 Base Removal

介绍 Removing the base of your food processor is necessary for additional repairs and cleaning.

工具: 64 Bit Driver Kit (1) Spudger (1)

© iFixit — CC BY-NC-SA

zh.iFixit.com

2 / 5 页

Hamilton Beach 70740 Base Removal

步骤 1 — Base Removal



Hold the food processor upside down and remove the two screws indicated with a screwdriver. Once unscrewed, remove the two rubber suction pads.

步骤 2



Use a spudger to remove the 4 rubber base pads located at the corners of the device.

© iFixit — CC BY-NC-SA

zh.iFixit.com

3 / 5 页

Hamilton Beach 70740 Base Removal

步骤 3 

Unscrew all 4 screws that are located beneath the pads with a screwdriver and remove the plastic grey base.



Remove the screws indicated with a screw driver.

步骤 4

© iFixit — CC BY-NC-SA

zh.iFixit.com

4 / 5 页

Hamilton Beach 70740 Base Removal

步骤 5 

Remove the two screws behind the knob with a screwdriver.

To reassemble your device, follow these instructions in reverse order. 此文档最后生成于 2017-09-01 01:55:31 PM。

© iFixit — CC BY-NC-SA

zh.iFixit.com

5 / 5 页