Handspring Visor Deluxe PDA Outside cover and stylus Replacement

Handspring Visor Deluxe PDA Outside cover and stylus Replacement

Handspring Visor Deluxe PDA Outside cover and stylus Replacement This guide will describe how to install the outside covers and stylus for the Handspring Visor Deluxe PDA.

Written By: David Faltemier

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Handspring Visor Deluxe PDA Outside cover and stylus Replacement

INTRODUCTION This guide will show you how to take off the front cover, stylus, and memory card cover.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Handspring Visor Deluxe PDA Outside cover and stylus Replacement

Step 1 — Outside cover and stylus



Remove the outer screen cover by releasing the top clip from the main body of the device.

Step 2



Pull out the stylus from the top right corner of the device.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Handspring Visor Deluxe PDA Outside cover and stylus Replacement

Step 3



Slide the memory cartridge cover up and off the device.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-20 01:35:31 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4