Olympus Stylus Tough-6000 Lens Cover Replacement
Olympus Stylus Tough-6000 Lens Cover Replacement
Olympus Stylus Tough-6000 Lens Cover Replacement The Lens Cover on your Olympus Stylus Tough-6000 is stuck and not properly responding.
Written By: Shannon Cooney
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement
INTRODUCTION I will be providing clear and easy steps on how to replace your Lens Cover on your Olympus Stylus Tough-6000 Digital Camera.
TOOLS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement
Step 1 — Disassemble Camera.
You will want to disassemble the camera to get to the Lens Cover.
There are two screws on the right side of the camera.
Use your Phillips #00 screwdriver and unscrew both screws.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement
Step 3
On the left side of the camera there will be another set of screws.
Unscrew both screws with the same Phillips #00 screwdriver.
Step 4
After unscrewing the screws on the left side of the camera you will notice a speaker hat.
© iFixit — CC BY-NC-SA
www.iFixit.com
You will be able to pull the speaker hat off.
You must pull the speaker hat off to be able to pry the front shell of the camera apart.
Page 4 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement
Step 5
Grab your plastic opening tool and begin to pry off the front shell of the camera.
The front shell will easily come off after a couple of prys.
Once you have the camera shell cover off you can see the lens cover.
Unscrew the lens cover with your Phillips #00 screwdriver to replace it with a new lens cover.
Step 6
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-12 06:10:47 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement The Lens Cover on your Olympus Stylus Tough-6000 is stuck and not properly responding.
Written By: Shannon Cooney
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement
INTRODUCTION I will be providing clear and easy steps on how to replace your Lens Cover on your Olympus Stylus Tough-6000 Digital Camera.
TOOLS: Phillips #00 Screwdriver (1) iFixit Opening Tools (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement
Step 1 — Disassemble Camera.
You will want to disassemble the camera to get to the Lens Cover.
There are two screws on the right side of the camera.
Use your Phillips #00 screwdriver and unscrew both screws.
Step 2
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement
Step 3
On the left side of the camera there will be another set of screws.
Unscrew both screws with the same Phillips #00 screwdriver.
Step 4
After unscrewing the screws on the left side of the camera you will notice a speaker hat.
© iFixit — CC BY-NC-SA
www.iFixit.com
You will be able to pull the speaker hat off.
You must pull the speaker hat off to be able to pry the front shell of the camera apart.
Page 4 of 5
Olympus Stylus Tough-6000 Lens Cover Replacement
Step 5
Grab your plastic opening tool and begin to pry off the front shell of the camera.
The front shell will easily come off after a couple of prys.
Once you have the camera shell cover off you can see the lens cover.
Unscrew the lens cover with your Phillips #00 screwdriver to replace it with a new lens cover.
Step 6
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-12 06:10:47 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
