How to Clean Canon PIXMA MP190 Print Head Nozzle
How to Clean Canon PIXMA MP190 Print Head Nozzle
How to Clean Canon PIXMA MP190 Print Head Nozzle Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.
Written By: Garret Wescott
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle
INTRODUCTION Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.
TOOLS: screen and device cleaner/cloth (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle
Step 1 — Turn printer on.
The printer needs to be on in order to change the ink cartridges.
Step 2 — Locate Ink Cartridges
To locate the ink cartridges the paper output tray must be in the lowered position.
Next lift the scanning unit until the scanning support is vertical.
Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle
Step 3 — Remove Ink Cartridge
Allow the printer to position the ink cartridge carrier into the ink cartridge removal location.
Push down on the front edge of the ink cartridge.
Before replacing the ink cartridge ensure the correct ink cartridge is installed.
Observe the angle at which the ink cartridge is removed.
Grasp ink cartridge and pull up and out to remove.
Step 4 — Clean Ink Nozzle
Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle.
Repeat until the nozzle appears free of any ink and debris.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-05 06:19:43 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.
Written By: Garret Wescott
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 1 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle
INTRODUCTION Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.
TOOLS: screen and device cleaner/cloth (1)
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 2 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle
Step 1 — Turn printer on.
The printer needs to be on in order to change the ink cartridges.
Step 2 — Locate Ink Cartridges
To locate the ink cartridges the paper output tray must be in the lowered position.
Next lift the scanning unit until the scanning support is vertical.
Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 3 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle
Step 3 — Remove Ink Cartridge
Allow the printer to position the ink cartridge carrier into the ink cartridge removal location.
Push down on the front edge of the ink cartridge.
Before replacing the ink cartridge ensure the correct ink cartridge is installed.
Observe the angle at which the ink cartridge is removed.
Grasp ink cartridge and pull up and out to remove.
Step 4 — Clean Ink Nozzle
Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle.
Repeat until the nozzle appears free of any ink and debris.
To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-05 06:19:43 AM.
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 4 of 5
How to Clean Canon PIXMA MP190 Print Head Nozzle
© iFixit — CC BY-NC-SA
www.iFixit.com
Page 5 of 5
