HP Media Center 876x CMOS Battery Replacement AWS

Report 2 Downloads 60 Views
HP Media Center 876x CMOS Battery Replacement

HP Media Center 876x CMOS Battery Replacement This guide will show you how to replace the CMOS battery.

Written By: Balakrishnan Pillai

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

HP Media Center 876x CMOS Battery Replacement

INTRODUCTION The CMOS battery is the source of the initial power used in turning the computer on. If your HP Media Center 876x will not turn on, the CMOS battery may need replacement.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

HP Media Center 876x CMOS Battery Replacement

Step 1 — Side Panel



Remove the two (9 mm) hand screws on the back panel.

Step 2



Place the tower on its side.



Slide the side panel horizontally to detach, and pull upward to remove.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

HP Media Center 876x CMOS Battery Replacement

Step 3 — CMOS Battery 

Identify the CMOS battery.

Step 4



Pull battery, in a rolling motion, out of its slot.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-07-01 01:48:20 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4