HTC Touch Pro 2 Camera Replacement

HTC Touch Pro 2 Camera Replacement

HTC Touch Pro 2 Camera Replacement After removing the housing, you can remove the camera.

Written By: Melinda Phan

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 5

HTC Touch Pro 2 Camera Replacement

TOOLS: T5 Torx Screwdriver (1) Tweezers (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 5

HTC Touch Pro 2 Camera Replacement

Step 1 — Battery



Remove the back cover by applying pressure and sliding upward.



Lift the back cover up and away from the phone.

Step 2



Remove the battery by lifting upward from the slot located on the right hand side.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 5

HTC Touch Pro 2 Camera Replacement

Step 3 — Camera



Using a T-5 screwdriver head, remove the four screws in corners as shown.

Step 4



Lift the part shown in picture 2 on the top side of the phone.



There is a ribbon attached on the back of this part that requires caution to remove.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 5

HTC Touch Pro 2 Camera Replacement

Step 5



Use the tweezers to pull up and off the camera cover.



Use the tweezers to pull up and the off camera.

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-06-23 11:43:12 AM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 5