Huawei P8 Lite Earpiece Speaker Replacement
Huawei P8 Lite Earpiece Speaker Replacement
Huawei P8 Lite Earpiece Speaker Replacement Guide to safe replacement of the Huawei P8 Lite earpiece speaker.
Geschrieben von: Brayden Mann
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 1 von 5
Huawei P8 Lite Earpiece Speaker Replacement
EINLEITUNG This guide will instruct step-by-step how to disassemble the P8 Lite and replace the earpiece speaker. A breakdown kit and a replacement earpiece speaker will be required. Review the device Teardown Guide to get started.
WERKZEUGE: Phillips #000 Screwdriver (1) SIM Card Eject Tool (1) Spudger (1) T5 Torx Screwdriver (1) Tweezers (1)
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 2 von 5
Huawei P8 Lite Earpiece Speaker Replacement
Schritt 1 — Remove Back Cover and Loudspeaker
Use the Spudger tool to get access to the loudspeaker. Locate where the headphone jack is, then move about one-inch to the right and begin to gently pry the back-cover off the phone with the flat end of the Spudger tool. Make sure to pry apart the entire perimeter of the back-cover to prevent bending/cracking of the plastic.
Tools used: Spudger tool (used as a wedge to pry off the back-cover and loudspeaker.)
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 3 von 5
Huawei P8 Lite Earpiece Speaker Replacement
Schritt 2
Attach the PH000 Bit onto the T5 Torx Screwdriver from the 64 Bit Driver Kit. Use this to remove the screws from the loudspeaker. The PH000 Bit will allow removal of the silver screws.
Be aware that the leftmost screws are different from the rightmost screws. To avoid future confusion, take note of the placement of each screw before setting them aside.
Tools used: PH000 Bit and T5 Torx Screwdriver from the 64 Bit Driver Kit
Schritt 3
Gently, use the flat end of the Spudger tool, or a metal opening tool to lift and remove the loudspeaker from the phone. The loudspeaker is the entire portion of the phone where the screws were extracted.
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 4 von 5
Huawei P8 Lite Earpiece Speaker Replacement
Schritt 4 — Earpiece Speaker
Use Tweezers to grip earpiece speaker and lift out from phone. Insert replacement earpiece speaker into slot.
To reassemble your device, follow Teardown Guide steps 12, 6, 5, 4, 3, 2, 1 in that order. Dieses Dokument wurde zuletzt angelegt am 2018-03-07 12:03:58 AM.
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 5 von 5
Huawei P8 Lite Earpiece Speaker Replacement Guide to safe replacement of the Huawei P8 Lite earpiece speaker.
Geschrieben von: Brayden Mann
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 1 von 5
Huawei P8 Lite Earpiece Speaker Replacement
EINLEITUNG This guide will instruct step-by-step how to disassemble the P8 Lite and replace the earpiece speaker. A breakdown kit and a replacement earpiece speaker will be required. Review the device Teardown Guide to get started.
WERKZEUGE: Phillips #000 Screwdriver (1) SIM Card Eject Tool (1) Spudger (1) T5 Torx Screwdriver (1) Tweezers (1)
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 2 von 5
Huawei P8 Lite Earpiece Speaker Replacement
Schritt 1 — Remove Back Cover and Loudspeaker
Use the Spudger tool to get access to the loudspeaker. Locate where the headphone jack is, then move about one-inch to the right and begin to gently pry the back-cover off the phone with the flat end of the Spudger tool. Make sure to pry apart the entire perimeter of the back-cover to prevent bending/cracking of the plastic.
Tools used: Spudger tool (used as a wedge to pry off the back-cover and loudspeaker.)
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 3 von 5
Huawei P8 Lite Earpiece Speaker Replacement
Schritt 2
Attach the PH000 Bit onto the T5 Torx Screwdriver from the 64 Bit Driver Kit. Use this to remove the screws from the loudspeaker. The PH000 Bit will allow removal of the silver screws.
Be aware that the leftmost screws are different from the rightmost screws. To avoid future confusion, take note of the placement of each screw before setting them aside.
Tools used: PH000 Bit and T5 Torx Screwdriver from the 64 Bit Driver Kit
Schritt 3
Gently, use the flat end of the Spudger tool, or a metal opening tool to lift and remove the loudspeaker from the phone. The loudspeaker is the entire portion of the phone where the screws were extracted.
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 4 von 5
Huawei P8 Lite Earpiece Speaker Replacement
Schritt 4 — Earpiece Speaker
Use Tweezers to grip earpiece speaker and lift out from phone. Insert replacement earpiece speaker into slot.
To reassemble your device, follow Teardown Guide steps 12, 6, 5, 4, 3, 2, 1 in that order. Dieses Dokument wurde zuletzt angelegt am 2018-03-07 12:03:58 AM.
© iFixit — CC BY-NC-SA
de.iFixit.com
Seite 5 von 5
