Industrial Fluorescent Industrial Kinetics 1435-IF
1435-IF
application
electrical
• Designed for modern T8 and T5 sources. • Easy to install industrial luminaire. • Designed for individual or continuous row mounting. • Shallow profile minimizes visual size and enables installation in low height applications. • Wide light distribution and high optical efficiency allow wide luminaire spacing. • “Herringbone” slots in apertured reflector provide approximately 15% uplight in a smooth, even 170˚ uplight distribution.
• Class P, HPF ballasts comply with E Federal Ballast Law (Public Law 100-357, 1988). • UL listed for damp locations. Canadian certified optional. • (Low-Profile) Self-contained fluorescent emergency power packs can be incorporated. (UL dry location)
rev. 7, 09/17/2012
Industrial Fluorescent Industrial Kinetics 4' or 8' 2 or 3 Lamp T8 or T5
construction/finish • Solid or apertured reflectors. • Housing is painted after fabrication with high reflectance white polyester powder finish. • Multiple knockouts and optional sliding hanger brackets offer convenient installation. • Locking sockets ensure lamps make positive contact and are positively retained.
Specifier’s Reference Project Type Model No. Comments
Green Choice: IKA232-UNV-1/2-EBLHE – Reflector
Lamp Type/Wattage
Family
No. of Lamps/Cross Section (not included) 2 3
Accessories
Voltage 120 277 347 UNV – Universal voltage, 120-277 volt
28 – 28WT5 (46") 32 – 32WT8 (48") 54HO – 54WT5HO (46")
A – Apertured S – Solid
IK – Industrial Kinetics IKC – Canadian Version TIK – Tandem Version TIKC – Tandem Canadian Version
–
E4-HKK – Sliding hanger bracket with 7/8” hole (one) E4-HKS – Sliding hanger bracket with 1/4” x 1” slot (one) E4-CHK – Chain hanger hooks (pair) (requires FL-123 or similar) FL-123 – 5’ chain (w/S-hooks) (pair) (requires E4-CHK) CS-400 – Rigid stem canopy CS-500 – Swivel stem canopy CS Series Stems N-3380/3381 – Universal joint aligner, octagonal box, 1/2” / 3/4” I.P.S. N-3385 – Universal joint aligner, square box, 1/2” I.P.S. IK-173 – 4’ wire guard IK-BF – 4’ cross baffle (use 2 for 8’) IK-BFDEK – End caps (pair) for use with IK-BF cross baffle For stem kits refer to spec. sheet 950-SS. For aircraft cable hanger kits refer to spec. sheet 950-SS.
Options 1/2 – One 2-lamp ballast 1/3 – One 3-lamp ballast 1/21 – 2-lamp & 1-lamp ballasts 1/4 – One 4-lamp ballast 1/42 – 4-lamp & 2-lamp ballasts EB – Electronic ballast,
application
electrical
• Designed for modern T8 and T5 sources. • Easy to install industrial luminaire. • Designed for individual or continuous row mounting. • Shallow profile minimizes visual size and enables installation in low height applications. • Wide light distribution and high optical efficiency allow wide luminaire spacing. • “Herringbone” slots in apertured reflector provide approximately 15% uplight in a smooth, even 170˚ uplight distribution.
• Class P, HPF ballasts comply with E Federal Ballast Law (Public Law 100-357, 1988). • UL listed for damp locations. Canadian certified optional. • (Low-Profile) Self-contained fluorescent emergency power packs can be incorporated. (UL dry location)
rev. 7, 09/17/2012
Industrial Fluorescent Industrial Kinetics 4' or 8' 2 or 3 Lamp T8 or T5
construction/finish • Solid or apertured reflectors. • Housing is painted after fabrication with high reflectance white polyester powder finish. • Multiple knockouts and optional sliding hanger brackets offer convenient installation. • Locking sockets ensure lamps make positive contact and are positively retained.
Specifier’s Reference Project Type Model No. Comments
Green Choice: IKA232-UNV-1/2-EBLHE – Reflector
Lamp Type/Wattage
Family
No. of Lamps/Cross Section (not included) 2 3
Accessories
Voltage 120 277 347 UNV – Universal voltage, 120-277 volt
28 – 28WT5 (46") 32 – 32WT8 (48") 54HO – 54WT5HO (46")
A – Apertured S – Solid
IK – Industrial Kinetics IKC – Canadian Version TIK – Tandem Version TIKC – Tandem Canadian Version
–
E4-HKK – Sliding hanger bracket with 7/8” hole (one) E4-HKS – Sliding hanger bracket with 1/4” x 1” slot (one) E4-CHK – Chain hanger hooks (pair) (requires FL-123 or similar) FL-123 – 5’ chain (w/S-hooks) (pair) (requires E4-CHK) CS-400 – Rigid stem canopy CS-500 – Swivel stem canopy CS Series Stems N-3380/3381 – Universal joint aligner, octagonal box, 1/2” / 3/4” I.P.S. N-3385 – Universal joint aligner, square box, 1/2” I.P.S. IK-173 – 4’ wire guard IK-BF – 4’ cross baffle (use 2 for 8’) IK-BFDEK – End caps (pair) for use with IK-BF cross baffle For stem kits refer to spec. sheet 950-SS. For aircraft cable hanger kits refer to spec. sheet 950-SS.
Options 1/2 – One 2-lamp ballast 1/3 – One 3-lamp ballast 1/21 – 2-lamp & 1-lamp ballasts 1/4 – One 4-lamp ballast 1/42 – 4-lamp & 2-lamp ballasts EB – Electronic ballast,
